Is This the correct section ?
I have a xda2 exec. I tried to update my rom, the congratulations screen displayed with a checking informaton on device message, this froze for some time so I disconnected the usb cable. when I tried to reset it, I get is a dispaly with just colours on it and it does nothing else, when I try to update again it shows an error connection error 101, also the device is not recognised. Is there a way to resolve this issue please and can someone be kind enought to direct me.
I used the rom update from - my-xda.com/xdaexec_soft2.html
Thank you in advance.
Try to hard reset your device
hold buttons: "-" + "-"
and then reset
so in practical terms, push the top 2 dash keys which are between your green and red phone icon buttons, and while holding them reset your device using the pen.
this should give you a white screen with a little menu.
You can now select clear device or something, I think it's the 0 or the X
it should work
if that doesn't work try to put your device in Bootloader
buttons: Backlight (front little button) + power button + reset button (with your pen)
again, hold the backlight and power button, then reset button
the screen should be dark, but if you look real close it would say USB or Serial v1.0 or v1.1 or something
you should be able to flash now using the tool
Also look around on this forum, loads of topics about upgrading/flashing and hanging problems
more info: http://forum.xda-developers.com/showthread.php?t=290234
u might have to update bootloader, try 2 read wiki.xda-developers.com lots of usefulll infos for beginers
Thank you
To both members above, thank you for your time. I am now using the update tool, hopefully this will now work. I used the method pressing the light button and power and reset. (Bootloader)
hey guys
how is it?
i have a problem with my diamond, its very strange
i already installed hardspl 1.24 on the phone
and now if i want to install the dutty v4 for my diamond .. alway when i click update to this rom its restarting active sync or the vista tool gets closed and the device isn't updating
on myother windows xp machine there is a application error if i want to start the dutty tool
can anybody help me?
thanks in advance and have a great week
rob
You should install this using the internal method.
Just grab the .nbh file and rename it DIAMIMG.nbh
Put this in your Internal 4GB storage.
Soft reset your device and immediately press the Vol. Down and back button and a grey screen will appear. Vol up to install. After, don't forget to hard reset your phone.
hey you
thanks for your quick answer
but it isn't working if i soft reset the device and press vol down and back (the arrow which is pinting to left) it doesn't open a menu!
do i need a special hard spl? or do i something wrong on the reset?
i just don't get te screen, it's just starting normally
really strange!
thanks in advance
robsterr said:
hey you
thanks for your quick answer
but it isn't working if i soft reset the device and press vol down and back (the arrow which is pinting to left) it doesn't open a menu!
do i need a special hard spl? or do i something wrong on the reset?
i just don't get te screen, it's just starting normally
really strange!
thanks in advance
Click to expand...
Click to collapse
No, a special hard spl is not required. Any one will do. You are probably not doing the procedure quick enough. Try again.
When you soft reset get your hands immediately ready to press both (Vol. Down + Back Arrow Button). HOLD this until you see the grey menu and follow the instructions.
And make sure the DIAMIMG.nbh file is in your Internal Storage (4GB)
On my phone, the vol-down + back-button doesn't work either. It just resets the phone as normal. A vol-down + enter-button does move it to the hard-reset screen though, then an up-arrow finishes the hard reset, but not loading the DIAMIMG.nbh file. Maybe they removed the vol-down + back-button? Or changed it somehow?
Make sure that your internal storage is FAT32, It wont work if it is anything else
When you get to the grey screen, it tells you to Press the power button to update
razorbud said:
Make sure that your internal storage is FAT32, It wont work if it is anything else
Click to expand...
Click to collapse
Yep, fat32...
LandyMan said:
When you get to the grey screen, it tells you to Press the power button to update
Click to expand...
Click to collapse
Doesn't work, and the text is not there either.
I also think it's important to change the name .nbh before you transfer it to your phone, at least it was for me!
Well, I figured out one mystery. For my model version, it's not vol-down + back-arrow to get into the SPL screen on power up. It's vol-down only while powering on the device. Go figure!
Still stuck with no ability to install Hard SPL though
scottwilkins said:
Well, I figured out one mystery. For my model version, it's not vol-down + back-arrow to get into the SPL screen on power up. It's vol-down only while powering on the device. Go figure!
Still stuck with no ability to install Hard SPL though
Click to expand...
Click to collapse
ALL MODELS SHOULD BE THE SAME>>
Basic Info.
(Soft Reset and press Vol. Down) = Get To Bootloader
(Soft Reset and Press Vol. Down + back-arrow) = To Install Radio or ROM form Internal Storage (must have DIAMIMG.nbh in first before flashing)
To confirm that there is no confusion. The "Back arrow" button is the one above the hang up button. NOT left of the middle circle button
So press volume down, Back arrow and then with your third hand, press the reset button with the stylus. Continue to hold the Vol Down and Back Arrow until the image install screen appears. (about 2 seconds)
Sorry guys, no the back-arrow button plus Vol-down does not work. Vol-down alone does. The new phones are different, I'm almost 100% positive they are. The stock SPL was version 1.95 which I've not yet seen here. And, I can't seem to dump any of the ROM (and now can't dump the SPL, BUMMER!, but that's another issue...)
But vol-down + enter + reset does give the clear memory option, with a slightly different wording on the reset screen that what I've read here that it should be.
scottwilkins said:
Sorry guys, no the back-arrow button plus Vol-down does not work. Vol-down alone does. The new phones are different, I'm almost 100% positive they are. The stock SPL was version 1.95 which I've not yet seen here. And, I can't seem to dump any of the ROM (and now can't dump the SPL, BUMMER!, but that's another issue...)
But vol-down + enter + reset does give the clear memory option, with a slightly different wording on the reset screen that what I've read here that it should be.
Click to expand...
Click to collapse
Well so far your device seems to be the first out of the gate that reacts this way.
Sorry to hear!
dude plz help me where can i get dutty v4 rom for diamond......
i yestrday updated may HTC DIAMOND with this
(_HTC Touch Diamond_MRII_RUU_Diamond_HTC_SVE_2.03.413.2_Radio_ Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe)..
but it still on swedish,can i download (RUU_Diamond_hTC_Asia_HK_WWE_1.34.831.1_52.24.25.0 8_0.93.25_Ship.exe)
OR
[ROM][WWE/RO][01.OCT.09]Akeo_WM_6.1_WWE_Premium_Edition_V 2.0/RO_Standard_Edition V1
and updated again or not? im confused..im scared if phone crash if i updated now..can anybody help mi with answer
the ups can not succeed.
try again another great rom.
ROM can not up the shiprom the machine up normally if no genuine
Flash ROM guide HTC Diamond Direct ( shiprom)
This uprom compact way, no need to up the ROM machine is hence to minimize the errors arising from failure to connect
In this way, just up Radio ROM and takes up less than 4 minutes. Great speed.
When the follow up process follows:
1 / Select a file from the ROM NBH tail .. downloaded and renamed DIAMIMG.nbh
2 / Copy the file: DIAMIMG.nbh drop to the Internal Storage
3 / Soft Reset Button + Hold down the volume button and <---- back
4 / How to instructions on the screen press the power button to continue the process uprom
When will finish up the words you wait a little press ok then press the reset button or press volumdown + + softreset enterbutton to hadreset machine.
OK, so I have found a few guides that try to resolve this, but as yet nothing that completely got me where I need to be.
The background:
I have a UK T-mobile HTC Desire (Bravo) with HBOOT 0.93.0001, with an SLCD screen, with the latest OTA updates and now running MIUI ROM 1.5.13.
The problem:
Condensation under the screen meant that I needed to send back under warranty. To do this I needed to restore my phone to stock T-Mobile ROM.
I got hold of a stock T-Mobile RUU (available at Shipped Roms), tried to run this but got an error as the version of my current ROM and HBOOT was newer than what I was trying to put on the phone.
I did a bit more digging and realised that I was doing a few things wrong, did not have goldcard and realised that because I was on HBOOT 0.93 this would not work. Therefore I needed to downgrade HBOOT (http://forum.xda-developers.com/showthread.php?t=768256). This guide will put an unbranded RUU on the phone if followed completely, but obviously I needed a T-mo branded version and so used the RUU mentioned above.
This would prove to be my mistake.
This updated my phone to HBOOT 0.80 which unfortunately does not play nice with the SLCD screen.
Net result: my phone turned on (could feel the vibration when turning phone on).
Here is how I solved it....
The disclaimer:
This worked for me, it may not work for you ... etc etc .. I'm not responsible, etc etc.
OK, so to recap - I had:
- Created a gold card (TIP: always create a gold card by accessing your microSD in your phone over USB, I tried it in a card reader and it does not work properly)
- Downgraded to HBOOT 0.80 (http://forum.xda-developers.com/showthread.php?t=768256)
- Ran a T-Mobile Stock RUU (available at Shipped Roms)
The next steps:
- Go and get the latest T-Mobile OTA update (again, from Shipped Roms)
- Get your gold card (or create if required. Remember this must be done with the SD card in a phone, can be a different phone but must be your goldcard image)
- Rename the OTA update to update.zip and copy to root of SD card
You know need to boot in to recovery and run update.zip. All of this will be without the screen, so you need to follow the exact steps and make sure you wait where told - wait longer if in any doubt
- turn the phone off (battery out is sure fire way)
- Hold volume down (and keep held), press and release power whilst keeping volume held down (3-4 seconds)
- Now in HBOOT menu
- Wait 20 seconds
- Volume down * 1, press power button (phone go in to recovery)
- Wait for 30 seconds (reading SD card)
- Hold volume up and press power (go in to Android system recovery)
- Volume down *1, press power button (select "Apply sdcard:update.zip")
- Wait for 15 minutes (the update.zip on SD card is being read and applied)
- Press power *1 to reboot system
- After reboot you must wait a while and then you will see some green graphics on the screen... just wait it out
- You should then see the little pink circle and you can be happy
You will need to change language as the phone starts in German or Turkish, once done you will need to reboot to get everything completely back to English (some things such as vmail seemed to stick until reboot)
I hope this helps for anyone that was also terrified that they had broken their phone!!
There are also several methods for getting the phone in to USB debugging as it allows you to do much more with the phone and has some of it's own options to get you out of this mess. Obviously this requires going blind, these are the steps I went through:
- Turn off phone
- Turn on phone
- Wait until fully booted
- Press power and slide finger down to unlock
- Press and hold finger on screen until vibrate to verify you unlocked the screen
- Press back
- Menu
- Right 3 times, Down 1, click (Settings menu)
- Up *15 (to get to top of menu), down *10, click (Applications menu)
- Down * 3, click (Development menu)
- Click (USB debugging)
- Click (Confirm)
Hope this helps all!!
Cheers,
Pete
have the same issue with my htc desire but the problem is i have a usb brick so can't create a gold card.any help?
Hello!
Thanks for your guide. But for me it was a little different.
About my phone: HTC Desire with SLCD and T-Mobile Branding. S-Off via Alpharev
Preparing: Made a Goldcard out of my SD-Card with only one partition
Step 1: Downgrade HBOOT to original version (bravo_downgrade.img). Only necessary if you installed a Alpharev HBOOT.
Step 2: Downgrade the phone to Android 2.1 like here
Step 3: Install T-Mobile RUU. I used "RUU_Bravo_Froyo_TMO_AT_2.12.112.1_Radio_32.46.00.32U_5.10.05.17_2_release_143754_signed.exe", you can find it at shipped-roms.com.
Result: No Black Screen, Downgraded Phone with original T-Mobile ROM.
I had problems with the RUU. So I started the RUU and found in the Temp-Folder the rom.zip. I renamed it to PB99IMG.zip, copied it on the SD and installed the rom in the Bootloader.
Cheers
Kobi-P
I have HTC One M8 Rooted device...with mistakenly the OS is deleted ...now not going to start..and can't access to boot loader. The phone is stuck with red message on black screen under the Battery popup logo...( "this build is for development purposes only. Do not distribute outside of HTC without HTC's written permission. Failure to comply may lead to legal action").
i did the flowing step but not result...phone is tuck..
1- charge the phone 24 hour
2- press the power key for long time
3- press volume up and power key for long time
4- press the volume down and power key for long time
5- press the all key for long time...
6- not detect by computer..( because its going power on and not go to boot more..)
but no result phone behave is noting...its stuck on red message...( remember this message on the black screen ....not on white screen under HTC logo)
will be thanks if some one guide me..that how to boot or how to flash or install the twrp by force ...sd card.
with thanks
Is it a One S, or an M8? Those are 2 completely different phones.