Starburst rom epic fail. Help - Desire Q&A, Help & Troubleshooting

Hey, so I put starburst on my phone earlier from scratch. I rooted it, did the SD card thing and installed the Tom. So here's the problem, when I went to restore my internal memory using the "kryogenic" (that might be wrong) restore it set my phone right back to before I changed it. So now I have the rom and installer in the recovery menu with all my apps and data. Can I just start the install again now or do I have to wipe the phone first?
Thanks a million

I take it your wanting to use A2SD at least. If I was you I would at least do a factory reset and see if you can install apps to sd. If not just start again.

No, I want the load of internal memory that comes from the starburst rom. I have the installer and rom in the recovery menu now, and my SD card is partitioned too. I was wondering if i could install the rom with my SD card and internal memory still intact. Or if I have to wipe them both first. I dont want to install it to only brick my phone. Thanks a ton.

Related

a2sd Problem Switching ROM's (slidemeroot5r1 and SlideMR v4)

Ok, I have slidemeroot5r1 currently installed on my phone. I have an ext3 partition for it and my a2sd is working fine. I went to test out SlideMR v4 which states that it also supports ext3 partition for a2sd. So I go into clockwork and wipe the phone then install slidemr v4. When the phone boots back up none of my apps are there. Just wondering what the problem could be? Both ROM's support ext3 for a2sd. Also, when i wipe again and restore my nandroid of slidemeroot5r1 my apps are all back on the sd card through a2sd. Anyone know what the deal is? Thanks in advance.
Edit: CM 5.0.8 for Slide doesn't have my apps showing up either. My apps only seem to be showing up in slidemeroot5r1
I remember back from the old G1 days... often when switching between roms when you have a2sd you will have to wipe the ext on your sd card for it to work. I always just reformatted the ext in gparted in Ubuntu and reflashed the rom to make it start working. I have had to wipe the card with this phone to...... kind of annoying but may help.
I just backed everything up in MyBackup Pro and flashed the new ROM then just restored all my apps and they went to SD. They don't seem to carry over on their own though I have to do the restore and they go to SD. Thanks for reply.

Phone is really messed up... need help!

I sort of started explaining my issue in the Skyraider Vanilla RC2 thread... but I didn't want to take over that thread for my own issues.
This is what happened-
I tried to install this update that was on the thread, I did a nandroid +ext back up before I did so. When I ran the update it said something about sense 3.1 update so I thought something was a bit wierd, when I turned on my phone, all my apps were rapidly force closing in front of the setup window so I rebooted my phone into recovery and did the nandroid restore. I cleared dalik cache as well, just to make sure things restored smoothly. My phone turned on, but was laggy and and the sd card was read only, it didnt show up when I attached it to my computer... I didn't have the original Vanilla RC2 file on my card, since I initially installed with rom manager, but then switched over to the amon ra recovery image so it was not there.
I rebooted into recovery again, and cleared dalik again, and cache, and then cleared the ext part of my sd card because I thought maybe there was an issue there... Now i turned on my phone my launcher is gone, some of the apps that came with vanilla in the first place are gone along with most of my other apps aside from appbrain for some reason. The phone is so laggy it is almost not even usable as a phone... What should I do?
Buy a new sd card? factory reset? I am totally at a loss..
to andrew
this is what I would do... go back into recovery and do all wipes. then format the card to your desired partitions. toggle usb and redrop the rom you want back on there and run zip from sdcard. You will have a bone stock system again and have to load all the things you want on there, but at least you will have a normal running phone again. If you happened to have things you wanted to save from the sdcard then the nandroid backup you had saved , well you should have drug it off the sdcard to your computer first. Then after you have a setup with the same rom running that you had your nandroid originally made from should load fine when you reload the backup.
1 save that nandroid backup to your pc
2 wipe completely and reformat your card
3 load the rom zip on the card and run it
4 load the nandroid backup to your sdcard and run it
or do 1-3 and start from scratch... hope this helps
buzzdroidx said:
this is what I would do... go back into recovery and do all wipes. then format the card to your desired partitions. toggle usb and redrop the rom you want back on there and run zip from sdcard. You will have a bone stock system again and have to load all the things you want on there, but at least you will have a normal running phone again. If you happened to have things you wanted to save from the sdcard then the nandroid backup you had saved , well you should have drug it off the sdcard to your computer first. Then after you have a setup with the same rom running that you had your nandroid originally made from should load fine when you reload the backup.
1 save that nandroid backup to your pc
2 wipe completely and reformat your card
3 load the rom zip on the card and run it
4 load the nandroid backup to your sdcard and run it
or do 1-3 and start from scratch... hope this helps
Click to expand...
Click to collapse
If do have a few backups saved to my computer, (from vanilla 2.5.2) but not the new one. (which is fine)
If I repartition the card, will it go back to being normal again? right now it is read only and will not show up on my computer at all so.. Also when you say wipe, do you mean wipe all data also?
yes wipe all the wipes they recovery you use offers then do a factory wipe THEN go into the format options and reformat your card. It wipes it all but you get a fresh start. then after you drag your rom back onto the sdcard and load it then do your nandroid Its possible your sdcard is hosed but not very likely
buzzdroidx said:
yes wipe all the wipes they recovery you use offers then do a factory wipe THEN go into the format options and reformat your card. It wipes it all but you get a fresh start. then after you drag your rom back onto the sdcard and load it then do your nandroid Its possible your sdcard is hosed but not very likely
Click to expand...
Click to collapse
It's alive!!!! Thank you so much =)
Gotta reload everything but, who cares!
your very welcome

??!! King SHOOTER and HDMwIn??!

2 questions or more lol... I'm a noob to all this but i am trying xD
1. is the shooter rom for evo 3d phones or normal evo phones or both...
2. is there a kernal for GB sense 3.0 that HDMwIn works on yet? all the forums i've read havent said there has been an update.
3. Should i download a different rom and download a new kernal? I have stock kernal. Any help I do appreciate
Shooter ROM is a port from the Evo 3D, built for the EVO 4G. If it is in the EVO 4G development section it is made for the Evo and wouldnt work on another phone because of framework issues.
HDMIwin currently doesnt work on Gingerbread Sense ROMs.
Either GoldenMonkey or Freedom kernel. I use Freedom kernel, as it is updated often and stable as anything.
Sent from my PC36100 using XDA Premium App
do you use Freedom Universal? Agressive or just the normal Freedom
and thanks for the help
I do not use the Shooter ROM, but Universal would most likely be it. I use Aggressive Freedom.
I am using my Sense setup, which is in my signature. r3chargeD is based on Mik3D, which is another port of the EVO 3D. Themed really nice, fast and a lot of free RAM.
Oh, and before you flash the ROM, partition your SD card if you havent before. What is the capacity of your card?
Sent from my PC36100 using XDA Premium App
16gb Kingston card
not sure how to format it or free up space/partition etcc... I have Amon Ra 2.3
I will get a link to a guide for you in just a second, let me break out the laptop...
Modified Dredz's guide found here, (thanks Dredz!) but I HIGHLY recommend you follow my write-up below.
BACK UP EVERYTHING ON YOUR SD CARD TO YOUR COMPUTER AS PARTITIONING DELETES EVERYTHING ON THE SD CARD
Back up everything on your SD card to your computer.
Boot into AmonRa.
Select "Partition SD Card". You will be prompted to set an amount for Swap and ext2. The rest of the card will be FAT32, which is normal storage space for everything else.
Select 1536 megabytes for swap
Select 3072 megabytes for ext2
Should say something about the rest being for FAT32 or something along the lines of that, choose to continue.
After process finishes, select "Upgrade ext2 to ext3".
After process finishes, DO NOT CHOOSE TO UPGRADE TO ext4. Do NOT
Go to the wipe menu and wipe EVERYTHING there. Twice.
From main menu, select USB-MS and copy your files back to your SD card. You don't have to transfer files like android.secure and Android and temporary files, only what you need.
Do a fresh install of Shooter ROM or ROM of your choice.
Flash Freedom kernel, whichever you chose.
Reboot.
Initial boot will take a while. Let it be.
Once everything is booted up, do setup and reboot.
Download apps from the Market. I highly recommend a fresh install, not restoring from Titanium Backup or anything of the sort.
now once i do this, it will erase everything currently on the card correct?
anaias said:
now once i do this, it will erase everything currently on the card correct?
Click to expand...
Click to collapse
Partitioning will delete everything on the card. That is why I want you to back up everything on the card to your computer before you start anything. Flashing the ROM will not delete anything on your SD card. The only thing that will delete anything on your SD card will be partitioning. Just follow all of the steps exactly
so after i partition, I can go ahead and install the kernal first, then install the rom? or rom then kernal?
nvm, i see you put install rom, then kernal lol
Back up everything on your SD card to your computer.
Boot into AmonRa.
Select "Partition SD Card". You will be prompted to set an amount for Swap and ext2. The rest of the card will be FAT32, which is normal storage space for everything else.
Select 1536 megabytes for swap
Select 3072 megabytes for ext2
Should say something about the rest being for FAT32 or something along the lines of that, choose to continue.
After process finishes, select "Upgrade ext2 to ext3".
After process finishes, DO NOT CHOOSE TO UPGRADE TO ext4. Do NOT do it. DO NOT DO IT
Go to the wipe menu and wipe EVERYTHING there. Twice.
From main menu, select USB-MS and copy your files back to your SD card. You don't have to transfer files like android.secure and Android and temporary files, only what you need.
Do a fresh install of Shooter ROM or ROM of your choice.
Flash Freedom kernel, whichever you chose.
Reboot.
Initial boot will take a while. Let it be.
Once everything is booted up, do setup and reboot.
Download apps from the Market. I highly recommend a fresh install, not restoring from Titanium Backup or anything of the sort.
Everything in that specific order
now with the shooter Rom, it shows i need to download a Format all Zip... will i need to do that or no.. before installing the Rom
You don't need it, because wiping everything twice in the wipe menu does that. Trust me, wiping everything twice in the recovery wipe menu will be plenty and it will not fail.
sweeet thanks
So everything works now? I'm glad
Just a reminder: whenever you are flashing a new ROM, wipe everything (cache, dalvik, data, system, rotate and battery stats, boot, sdext, android.secure, anything else I might have forgotten) twice except for SD card. You don't need to ever wipe the SD card itself, only the sdext
yup, everything seems to be working okay. I really do appreciate your help
No prob, that's the beauty of XDA, users helping other users
well everything was working fine, then i rebooted the phone again, and now it is stuck on the Evo splash screen, wont load after that!!! help >.<
i tried wiping/reflashing and everything, phone booted up fine, worked for a couple minutes, then once i rebooted, it froze up again. Not sure what to do now

HTC Sense, Lee Droid or a new ROM?

Hello,
I am a noob and I hate myself.
I recently purchased a second hand HTC Desire with Lee Droid on it. Everything was working fine.Then the phone asked my if I wanted to update? I tried to update but it would not work. Then after a while it stopped asking me to update. Then a little while later it was on a start up loop. I took out the SD card and it work but I had no apps, etc.
Now I have a serious problem with internal storage. I did a factory reset (still has the Lee Droid ROM on it) and it shows I have 92mb of internal storage...instead of up to 1GB!
So....I decided to try a few things. After doing a bit of quick reading I decided to go with the original HTC Sense software. In trying to do this I get a 140 bootloader error...so I must be using the wrong ROM?
Getting slightly more frustrated now...
I figured out I had to partition the original SD card again to get it working and that had worked but now I only have 112mb of internal storage using that Sd Card (I had purchased another one when this stopped working). So the internal storage issue still applies. And the main thing with this for me is that apps such as facebook and more will not transfer to the SD card whereas I thought I could do this before? So even to have Facebook on it and upgrade the apps with the phone gives me a 'low memeory' notification.
SO I guess my question is..
Should I just go back to HTC Sense and what ROM do I use?
or
Should I try out a different ROM?
Bear in mind I did not flash the phone originally, and while not a complete computer noob I would be quiet nervous about doing this with out some experienced help.
Everything you need to know is here
http://forum.xda-developers.com/showthread.php?t=809328
As a rough guide:
When you format your card you need an ext partition of say 1gb for app storage space (a2sd). The rest of the card should be fat32. This is to solve your low memory issues.
Download the custom rom of your choice to the fat32 partition of the sd card and boot the phone into recovery (volume down and power button then choose recovery). You probably have clockwork mod recovery or similar. Choose the option install zip from SD card.
Before you do this, in recovery you should wipe the dalvik cache and perform a wipe/factory reset.
Depending on the rom you use you will probably need to download and flash and a2sd script such as darktremour. This will make downloaded apps save to the ext partition automatically rather than to the phone memory.
It is worth doing as much reading up as poss before embarking on this and make sure you have enough charge in your phone when flashing or you might end up with a brick!
As for the choice of rom you need to decide if you want a rom with HTC sense included or an AOSP rom.
Sent from my HTC Desire using xda app-developers app
Ok thanks. Do you know any way I can find out which HTC Sense ROM is for my phone?
No matter what I do the internal memory is always lower than 120mb. It should be 512mb max right? I just did a factory reset again and it's at 77mb without any apps installed ot gmail or facebook profiles added! It these any way to fix this first off before I read more into flashing the phone with a different ROM?
Centurionmark said:
Ok thanks. Do you know any way I can find out which HTC Sense ROM is for my phone?
No matter what I do the internal memory is always lower than 120mb. It should be 512mb max right? I just did a factory reset again and it's at 77mb without any apps installed ot gmail or facebook profiles added! It these any way to fix this first off before I read more into flashing the phone with a different ROM?
Click to expand...
Click to collapse
Unless u use a2sd,ad2sd,int2sd or some script to move something to your sd partition,
you aren't going to have any more memory.
I think I should really go back to Sense before I do anything else or drive myself mad!
I tried another Sense ROM and it says I need to have my battery over 30pc but it's nearly fully charged!!!
colin_404 said:
Unless u use a2sd,ad2sd,int2sd or some script to move something to your sd partition,
you aren't going to have any more memory.
Click to expand...
Click to collapse
But I had more internal memory before. How do I install these?
And how can I find out what Sense ROM is for my phone?
I have downloaded the app 2 sd and done the sdk thing...
but it still does not solve my internal memory issue and why was it so big before on a rooted phone? The phone is still rooted. So it should be the same? Do I need to get my SD card to count as internal storage somehow. Any links?
Centurionmark said:
I have downloaded the app 2 sd and done the sdk thing...
but it still does not solve my internal memory issue and why was it so big before on a rooted phone? The phone is still rooted. So it should be the same? Do I need to get my SD card to count as internal storage somehow. Any links?
Click to expand...
Click to collapse
The guides for installing the customs roms u download r probably in the rom thread where the rom came from.
If it says ur battery is < 30% then u r using a RUU and u will need the correct one for ur phone.
Or use the 2.3 Ruu upgrade for Desire from HTC/Dev.
I think this is your best solution - CM7 which is a great rom without HTC sense.
If you have not created your ext partition yet do this:
http://forum.xda-developers.com/showthread.php?t=932824
Then flash this rom:
http://download.cyanogenmod.com/?device=bravo&type=stable
Installation instructions for the rom are here:
http://forum.cyanogenmod.com/forum-36/announcement-23-cyanogenmod-72-released-2012-jun-16/
Then install S2E from the play store. This includes an a2sd script and has tick boxes to chose what to send to your SD ext partition.
Then you are done
Sent from my HTC Desire using xda app-developers app
hans moleman said:
I think this is your best solution - CM7 which is a great rom without HTC sense.
If you have not created your ext partition yet do this:
http://forum.xda-developers.com/showthread.php?t=932824
Then flash this rom:
http://download.cyanogenmod.com/?device=bravo&type=stable
Installation instructions for the rom are here:
http://forum.cyanogenmod.com/forum-36/announcement-23-cyanogenmod-72-released-2012-jun-16/
Then install S2E from the play store. This includes an a2sd script and has tick boxes to chose what to send to your SD ext partition.
Then you are done
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
OK...a friend did the following:
Updated my android because I was still on 2.2
Updated the root to Andreev
Installed Ice Cream Sandwich...the current BETA I think...which works fine but lately the phone freezes sometimes
First I thought you were on about memory to SD swap apps on the market so I did a bit of reading. I installed S2E but cannot or do not know how to get it working. It asked me to install something else which kept giving me a 'cannot respond' message.
I tried to install A2SDGUI as per some guide but it says that either my phone is not rooted, I do not have an EXT partition or A2sd scripts are not installed.
I tried to install EXTions on both my SD cards both manually using partition software and using ROM Manager. They both show up as having a regular FAT32 partition, and EXT one and a Linux one. They still do not work.
I have tried using various different partition softwares and my head is in a spin form them and different guides. I cannot get Gparted to work, how do I get the Image from the download or install it on my PC?
I also think I have moved my Dalvik Cache to my original SD card and not the phone tells me I have 141mb free internal memory but I get 'insufficient space' messages when trying to download apps or update them. Since I did this, even when putting on my manual SD backup from my new SD card back onto it I get messages saying 'app does not exist, even on the Play Market one. Play Market works fine on the original SD card which I think I have moved the Dalvik cache to.
There is also no nandroid backup on the new SD card as I get an error message...
Please please please someone help me. All I want to do now is get more internal memory and have everything working with my new 4GB SD card in the phone. Thanks to everyone who posted links to guides but I am still getting to terms with some of the terminology and may need guides to do some of the things that are listed in the guides. As it is now I cannot download any new apps. When the phone was rooted to Ice Cream Sandwich I could only download about 3 apps and cannot update youtube, maps, google, mail, etc.
Centurionmark said:
OK...a friend did the following:
Updated my android because I was still on 2.2
Updated the root to Andreev
Installed Ice Cream Sandwich...the current BETA I think...which works fine but lately the phone freezes sometimes
First I thought you were on about memory to SD swap apps on the market so I did a bit of reading. I installed S2E but cannot or do not know how to get it working. It asked me to install something else which kept giving me a 'cannot respond' message.
I tried to install A2SDGUI as per some guide but it says that either my phone is not rooted, I do not have an EXT partition or A2sd scripts are not installed.
I tried to install EXTions on both my SD cards both manually using partition software and using ROM Manager. They both show up as having a regular FAT32 partition, and EXT one and a Linux one. They still do not work.
I have tried using various different partition softwares and my head is in a spin form them and different guides. I cannot get Gparted to work, how do I get the Image from the download or install it on my PC?
I also think I have moved my Dalvik Cache to my original SD card and not the phone tells me I have 141mb free internal memory but I get 'insufficient space' messages when trying to download apps or update them. Since I did this, even when putting on my manual SD backup from my new SD card back onto it I get messages saying 'app does not exist, even on the Play Market one. Play Market works fine on the original SD card which I think I have moved the Dalvik cache to.
There is also no nandroid backup on the new SD card as I get an error message...
Please please please someone help me. All I want to do now is get more internal memory and have everything working with my new 4GB SD card in the phone. Thanks to everyone who posted links to guides but I am still getting to terms with some of the terminology and may need guides to do some of the things that are listed in the guides. As it is now I cannot download any new apps. When the phone was rooted to Ice Cream Sandwich I could only download about 3 apps and cannot update youtube, maps, google, mail, etc.
Click to expand...
Click to collapse
I forgot to mention I also installed the a2sd scripts in the Terminal but still no joy.
Centurionmark said:
I forgot to mention I also installed the a2sd scripts in the Terminal but still no joy.
Click to expand...
Click to collapse
Most of the scripts will show your internal storage as normal, then report a a2sd partion.
The only two that report your internal AND est partion as one block are data2sd, and the ammurlez script. Both of these are flashable with Lee Droid, but afterwards. If you did a factory reset this would restore your Lee Droid ROM but wipe your data2sd or ammurlez script. This is why before updating anything, or flashing a new zip CWM backups are your friend.
Just "factory reset" it again, this DOES NOT" change your hboot or SD partions, then flash the ammurlez or data2sd scripts. Your phone will be as before reporting 1gb internal memory.
Or......play with all the awesome ROM and script possibilities on this forum till you find a setup you love......speed versus storage, sense versus aosop versus mui etc.
Most peoples signatures list their setup, try em all!
Sent from my HTC Desire using Tapatalk 2
The gparped image needs to be burned to cd rom. Just google how to do it. Then boot your pc with the cd in the drive and gparted will load up.
If you follow the guide I left earlier methodically step by step using the actual rom suggested it should work. Please note S2E only works on CM7 or CM9 roms only.
If try CM7 and don't like it you can flash something else after but at least you will have everything working and also gain an understanding of the steps you need to go through to do it.
Sent from my HTC Desire using xda app-developers app

[Q] Cleaning my internal memory before ROM flash

I flash a lot of roms on my phone. Recently I noticed that there was a lot of left over programs and apps on my internal memory. I have nothing on the phone I want to keep that is not already backed up via TitaniumBackup.
What I would like to do, is wipe everything that I can without messing up partitions or Mount points or the needed stuff in ./data/media so I can flash a new room on a totally clean phone (except for the nessasary files needed like the data/media stuff and recovery stuff ect..)
Normally when I flash I do this: (in TWRP)
1. Nandroid backup
2. Wipe/factory restore
3. Wipe data and system again
4. Flash new ROM
5. Wipe devlik/cache
6. Reboot
When I finally get to the desktop I start up root explorer and look around my internal memory. This is were I still see a lot of old apps still sitting there. I want them gone. I'm afraid to wipe/format internal memory while in TWRP because I will lose everything right ? Even the stuff that is needed to boot the phone to recovery.
Any suggestions ?
Thanks
T-Mobile Samsung G S4
SGH-M919
TWRP v6.x.x.x
16 gig micro sd-card
Go in twrp and click wipe, advanced, and click everything. after wiping Mount the phone to PC via twrp and move the rom and kernel to sd card. Unmount then do the steps you usually do to install a ROM, including wipe.
~~~~~~~~~~~~~~~~~~~~~
I am always on the mobile app and am always 'trying' to help others and moderators on the forum and learning something new everyday. I make stupid posts sometimes, but I never repeat a mistake more than once. I may not be a developer, but I know alot of stuff, so feel free to messsge me any questions and I'll be happy to answer them to the best of my ability.
~~~~~~~~~~~~~~~~~~~~~
I'm starting a video game company with my friend where we will be making Android games. message me for more info or go here: http://forum.xda-developers.com/showthread.php?t=2290843
Thibor69 said:
I flash a lot of roms on my phone. Recently I noticed that there was a lot of left over programs and apps on my internal memory. I have nothing on the phone I want to keep that is not already backed up via TitaniumBackup.
What I would like to do, is wipe everything that I can without messing up partitions or Mount points or the needed stuff in ./data/media so I can flash a new room on a totally clean phone (except for the nessasary files needed like the data/media stuff and recovery stuff ect..)
Normally when I flash I do this: (in TWRP)
1. Nandroid backup
2. Wipe/factory restore
3. Wipe data and system again
4. Flash new ROM
5. Wipe devlik/cache
6. Reboot
When I finally get to the desktop I start up root explorer and look around my internal memory. This is were I still see a lot of old apps still sitting there. I want them gone. I'm afraid to wipe/format internal memory while in TWRP because I will lose everything right ? Even the stuff that is needed to boot the phone to recovery.
Any suggestions ?
Thanks
T-Mobile Samsung G S4
SGH-M919
TWRP v6.x.x.x
16 gig micro sd-card
Click to expand...
Click to collapse
If you have your TiBu backups, nandroids, and ROM zips, pictures, videos, etc already on your SD card; there is no harm in formatting your internal memory. You won't lose recovery, you won't have a problem with booting, nothing of that sort.
When I was running SynergyRom on my S3, wiping Internal memory was usually Always suggested because of the reasons you mentioned.
Move your Nandroid and files you want to flash to your extSdCard card for obvious reasons.
I have TWRP 2.5.0.2 as my Recovery, which has been running without issues for months.
Enter Recovery:
Press -
Wipe
Format Data
As a safety valve, you'll be asked to Type in Yes to continue this Internal wipe.
You'll retain the partitions you mentioned.
I think the above will get you to where you want to be.
You can always double check afterward as you've already done before.
Biker1 said:
When I was running SynergyRom on my S3, wiping Internal memory was usually Always suggested because of the reasons you mentioned.
Move your Nandroid and files you want to flash to your extSdCard card for obvious reasons.
I have TWRP 2.5.0.2 as my Recovery, which has been running without issues for months.
Enter Recovery:
Press -
Wipe
Format Data
As a safety valve, you'll be asked to Type in Yes to continue this Internal wipe.
You'll retain the partitions you mentioned.
I think the above will get you to where you want to be.
You can always double check afterward as you've already done before.
Click to expand...
Click to collapse
Just wanted to say good question and responses. Helpful.

Categories

Resources