Ok, I have slidemeroot5r1 currently installed on my phone. I have an ext3 partition for it and my a2sd is working fine. I went to test out SlideMR v4 which states that it also supports ext3 partition for a2sd. So I go into clockwork and wipe the phone then install slidemr v4. When the phone boots back up none of my apps are there. Just wondering what the problem could be? Both ROM's support ext3 for a2sd. Also, when i wipe again and restore my nandroid of slidemeroot5r1 my apps are all back on the sd card through a2sd. Anyone know what the deal is? Thanks in advance.
Edit: CM 5.0.8 for Slide doesn't have my apps showing up either. My apps only seem to be showing up in slidemeroot5r1
I remember back from the old G1 days... often when switching between roms when you have a2sd you will have to wipe the ext on your sd card for it to work. I always just reformatted the ext in gparted in Ubuntu and reflashed the rom to make it start working. I have had to wipe the card with this phone to...... kind of annoying but may help.
I just backed everything up in MyBackup Pro and flashed the new ROM then just restored all my apps and they went to SD. They don't seem to carry over on their own though I have to do the restore and they go to SD. Thanks for reply.
Related
Hi,
Don't know weather or not this has been discussed before but i'm hoping for a reply.
I installed opendesire ROM and after some time my phone kept on rebooting, so I wanted to do a full wipe of the phone and reinstall a new ROM. I was also using A2SD so I have partitioned my SD card. Thing is, I wanted to wipe that as well so I had no remains of anything old before I put another ROM on. So I plugged the phone in reformatted the SD card as FAT32, Went into recovery done a full wipe of cache and factory restore and then flashed a new ROM. When the phone booted up though All my old apps were there. I don't want this to happen I just want the phone to be back with nothing on but the new ROM.
Could someone please explain to me how to do this?
Cheers
Ian
anybody?
Can anybody help?
You only formated the Fat32 partition. Ext3 is not visible under windows (ask m$ why). You can either:
1. format ext3 trough recovery
2. get linux and format it trough there
3. install software on your pc which can read ext3 partitions, I don't seem to recall its name
Cheers buddy. Your a gud'un!
Sent from my HTC Desire using XDA App
As I need more space on my internal memory I'm messing around with app2sd and came across a couple of questions:
which a2sd script is preferred on cm7 2.3.4: darktremor or firerat?
which method is preferred: move apps or move dalvik cache?
I formatted my sd card with two primary partitions so far: 1st one is fat and second one (512 MB) is ext3 for a2sd. rather use ext3 or ext4?
Thanks for any help.
Best regards,
SoulStyle
I didn't install any A2SD scripts and I can move anything to the SD card.
(cm 7.0.3)
1) I have been using Darktremor, and it works well.
2) Depends on your SD Card. If it is fast enough, you can move the dalvik as well. Personally, I move apps only.
3) Although EXT4 is supposed to be faster, on the Wildfire, the gains are probably negligible, if any,.
Thanks for the input
My first try with DTa2sd beta 04 went terribly wrong. After install some apps have simply gone missing and a a2sd remove didn't bring them back. The following a2sd reinstall gave my phone the final punch and left it unbootable and I had to pull the battery and do a complete reinstall. So I learned the hard way that nandroid and titanium backups do serve a purpose
Any idea what could have gone wrong?
Btw, is the a2sd option in cyanogen 7.1 settings compatible with DTa2sd?
SoulStyle said:
The following a2sd reinstall gave my phone the final punch and left it unbootable and I had to pull the battery and do a complete reinstall.
Click to expand...
Click to collapse
Same thing with me as well.
I tried partitioning with rom manager and recovery. Tried different ext sizes (128 , 256, 1024) with 0 MB swap. Partitioning is OK. But after running the DTApps2sd script from recovery, the phone gets stuck on the splash screen. Don't know what's wrong. Still not solved.
Use an older version. (Atleast Beta 3, or the last stable version). Beta 4 causes issues.
I flashed synergy rsl1
I have a 16 gig card partitioned per directions in thread.
I installed dta2sd and after reboot all my apps were GONE.
Where did they go?
If they are on the ext3 partition how do I look and see?
How do I get them back?
Go to terminal and type
su
a2sd reinstall
It should reset itself.
After that wipe cache & dalvik
Sent from my PC36100 using Tapatalk
i think that when you partition your sd card it erases everything. did you make a backup of the sd?
ak074 said:
i think that when you partition your sd card it erases everything. did you make a backup of the sd?
Click to expand...
Click to collapse
I made the partition prior to installing dta2sd.
It was only after dta2sd that all my apps are missing which i think they transfered but not being reconized.
bcarter2000 said:
Go to terminal and type
su
a2sd reinstall
It should reset itself.
After that wipe cache & dalvik
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Isnt there a FAQ or walk through somewhere to get people running Synergy RLS1 + Ext3 on their SD? If not, there needs to be one. Wiping and Flashing the ROM is easy but I can see where people get confused creating the partition then installing a2sd, etc. A good Synergy + Ext3 setup in step by step walk through would prevent a lot of these threads.
This one is pretty good when it comes to the basics of formatting/partitioning before a Synergy install.
[GUIDE][07/07/11]How to Partition your SD Card
Another
TalkAndroid Guide: Partitioning your Evo’s SD Card to Take Advantage of GingerSense ROMs
Alpine- said:
Isnt there a FAQ or walk through somewhere to get people running Synergy RLS1 + Ext3 on their SD? If not, there needs to be one. Wiping and Flashing the ROM is easy but I can see where people get confused creating the partition then installing a2sd, etc. (more accurately, just the order in which it should be done). A new user may not even know what "terminal" refers to. A good Synergy + Ext3 step by step walk through would prevent a lot of these threads. It's been discussed a ton in the Synergy thread but its so huge and bloated its hard to get anything useful out of it.
Click to expand...
Click to collapse
Totally agreed!!!
Its way to confusing.
I think my partition may be messed up... Is there a way to start over from scratch? I can't even see the partition is there. I was going to remove the partition thru a windows program partition manager but it doesn't show up. Just shows up as a 14.8 card. In windows explorer it shows up as 11 gig card I know its not going to add the partition to it but... still it should have showed up in the partition manager.
Back to a2sd
I tried reinstall and repair and it won't work. I also think somehow i d/l and older version.
I tried some other commmands and i got an error that it couldn't find the correct directory or some verbage i can't remember.
a2sd repair ..... got me EXT partition not mounted
a2sd reinstall..... got me ext sd not mounted
Any suggestions on what i should do?
Windows isn't going to help you in seeing the EXT partition (since Windows doesn't natively support any Linux partitions). You'll need a Linux machine or you can try to adb into your recovery.
If you do ADB into recovery, first thing you should look for is a program called parted in /sbin. If it's there, you can use that to remove and install a new EXT partition (sorry, I don't remember the exact commands off hand).
Darktremor may not be mounting it as it may not actually see the correct block device. It really depends on the version you are using.
To find the version, type a2sd help
pholt1 said:
Totally agreed!!!
Its way to confusing.
I think my partition may be messed up... Is there a way to start over from scratch? I can't even see the partition is there. I was going to remove the partition thru a windows program partition manager but it doesn't show up. Just shows up as a 14.8 card. In windows explorer it shows up as 11 gig card I know its not going to add the partition to it but... still it should have showed up in the partition manager.
Back to a2sd
I tried reinstall and repair and it won't work. I also think somehow i d/l and older version.
I tried some other commmands and i got an error that it couldn't find the correct directory or some verbage i can't remember.
a2sd repair ..... got me EXT partition not mounted
a2sd reinstall..... got me ext sd not mounted
Any suggestions on what i should do?
Click to expand...
Click to collapse
This might help...
[MOD] DarkTremor (DT) a2sd on Synergy and Kingdom ROMs:
http://forum.xda-developers.com/showthread.php?t=1126626
The Synergy rom has the CM a2sd script built-in so if you create an ext3 partition PRIOR TO flashing the Synergy rom, your 3rd party apps will automatically be stored on the ext3 partition upon installation. There is a specific version of DTA2SD for Synergy that can be found in the Synergy Updater app that comes preinstalled when you flash Synergy. The 'primary' reason for its use is to move the dalvik from the SD card back to internal storage and eliminate lag that may be bothersome to some people. I hope this clears up any lingering confusion. As for what happened to the apps, I can only 'assume' that the OP flashed a version of DTA2SD not specific to Synergy.
from my EVO 4G
dougjamal said:
The Synergy rom has the CM a2sd script built-in so if you create an ext3 partition PRIOR TO flashing the Synergy rom, your 3rd party apps will automatically be stored on the ext3 partition upon installation. There is a specific version of DTA2SD for Synergy that can be found in the Synergy Updater app that comes preinstalled when you flash Synergy. The 'primary' reason for its use is to move the dalvik from the SD card back to internal storage and eliminate lag that may be bothersome to some people. I hope this clears up any lingering confusion. As for what happened to the apps, I can only 'assume' that the OP flashed a version of DTA2SD not specific to Synergy.
from my EVO 4G
Click to expand...
Click to collapse
Is that Synergy-specific version of DTA2SD *only* available through the Synergy Updater? I ask because I have not set-up the Synergy Updater yet (requires server addresses, etc.).
Thanks!
OK, so I figured out how to get the Synergy version through the updater.
Flashed it successfully.
Seems as though just flashing it, I lost about 130MB of internal storage. Does that sound right? I went from close to 300MB, down to about 170MB. Is the Dalvik cache that big?
I have the HTC Evo 4G. I am currently rooted and I am running the latest FreshEvo rom.
As of recent I have been getting the low-space error on my phone. I really do not have much installed and I use Apps2SD.
I am considering swapping to a new ROM today or tomorrow.
My question is: When do I need to partition the SDcard?
With Gingerbread or Sense 3.0?
I am hoping I was supposed to have to do it before upgrading to Fresh's ROM because I find it hard to believe I am actually low on space.
Thanks for the input guys!
I have never used Fresh Roms, so as far as that goes, I don't know, but you partition your SD card when you want to use a script like DTA2SD that will install all of your downloaded apps to the SD card.
It is recommended that the SD card be at least a class 4, but I have used a class 2, and most apps run fine.
It doesn't really matter when you partition the card, if the rom you are using has a built in a2sd, it should automatically detect the partition, and transfer all apps to the sdcard upon first, maybe second boot. If the rom uses DTA2SD, you can go to the terminal emulator and type "a2sd reinstall", or maybe "a2sd install" I can't remember which at the moment. That will reset everything, and move all downloaded apps to the sd.
When you partition your card I recommend you wipe dalvik, though it is not necessary.
Cool! Thank you very much.
I've been partitioned on every ROM since I first discovered DT A2SD months and months ago....
It's really the only way to go.
I'm going to be partitioning my SD tonight as well. I've been getting the low space notification too, as the new Flash program is something like 17 MB of space, and I'm not giving up my Sense that easily. Hopefully all goes smoothly.
Just remember that you will lose ALL information on the SDCard when you partition, so back it up first!
Also, remember to upgrade to ext3 after the initial partitioning.
Bringing this back up.
I did the partition correctly. I tried a new ROM and I really dislike it.
I want to use another ROM but it does not have the Apps2SD (Baked-in) how would I go about using Fresh's ROM but get the Apps2SD thing to work on the entire ROM?
My HTC Desire was restarted due to low battery long after I restored some backups (app + data) with Titanium Backup. When I booted back into Android, it showed 1MB of free internal space! So thought it might be the 4 downloads I had, so I deleted all of them and Android then said it had 61MB of free internal space.
Then I rebooted but now I only have 216KB free space!!
This is the second time it's happened and I've tried everything including SD Maid and every single app is linked to the SD card's 2nd partition. This didn't happen when Installing apps from the Play store or from Easy Installer; and Avast finds no problems.
It keeps saying "Unfortunately Google Play Store has stopped" etc. and the phone is very slow including booting.
I'm not willing to re-flash everything again and manually install each app, especially as the first time re-flashing, Clockwork Recovery said it couldn't mount the SD card, then after formatting, Windows 7 wouldn't recognize it, then neither would (after formatting using gparted)!
I'm only using Link2SD on ICS for HTC Desire 0.4.4.4.1, default HBoot, Clockworkmod Recovery Touch 5.8.0.2, aGPS and default homescreen with no scripts.
This is extremely irritating, can anyone help please?
Using any scripts like A2SD?
Cool story bro. Please post more relevant information so peeps here can help you out. How about letting us know your hboot information, rom you are currently using, scripts etc. ;-)
I'm only using Link2SD on ICS for HTC Desire 0.4.4.4.1, default HBoot, Clockworkmod Recovery Touch 5.8.0.2, aGPS and default homescreen with no scripts.
DarkIceGB said:
I'm only using Link2SD on ICS for HTC Desire 0.4.4.4.1, default HBoot, Clockworkmod Recovery Touch 5.8.0.2, aGPS and default homescreen with no scripts.
Click to expand...
Click to collapse
try stock a2sd then enable it with terminal
Code:
su
a2sd install
y
y
y
Edit: also DL 5.1, i found 4.4.4.1 SUPER buggy.
Thanks for the help, I've tried the above and it's been booting for 10 minutes now, should I wait for it to finish or is it stuck?
Edit: After 30 minutes of booting, I took the battery out. It now won't go past booting (the animated 'X screen') and it takes ages to get past the 'HTC' screen to the boot screen.
Edit 2: I booted into recovery and cleared all caches and fixed permissions and after booting it doesn't say the memory is full! Thanks for your help!
What else did it move and is the data on the first partition of the SD card or the second and can I remove the SD card safely? Any idea how the internal memory was filled and why there were issues with the SD card or if they might appear again? It's a new Samsung Extreme Speed Class 10 16GB Micro SDHC card.
I can't move apps from the SD card to the SD card's second partition or to the internal memory. It says, "pkg: /mnt/asec/appnamehere/pkg.apk Failure [INSTALL_FAILED_INSUFFICIENT_STORAGE]".
The internal memory is empty, the SD card has 8GB of free space and the 2nd partition has 1GB free out of 2GB.
Just upgraded to 5.1 and it's the same as above. Any ideas?
Anyone have any idea?
What A2SD-option did you pick in Aroma Installer? I cannot see any Link2SD option there.
Sorry I meant I chose the built-in a2sd but I used this app called Link2SD as I have a second partition on my sd card for apps.
DarkIceGB said:
Sorry I meant I chose the built-in a2sd but I used this app called Link2SD as I have a second partition on my sd card for apps.
Click to expand...
Click to collapse
How have you partitioned your SD? Primary and secondary FAT32 or primary FAT32 and secondary EXT? I've never used Link2SD 'cause i prefer the script way, but i think it works the same way.
If you are using EXT for secondary, i recommend you the 4ext recovery, if you are S-OFF you can install it directly from the phone using the Updater form 4ext.net.
Then I suggest you to do:
A nandroid backup
A backup of your SD data
Repartition you SD using 4ext
Check partition allignment with 4ext
Do a full wipe
Restore your SD's backup
Restore your nandroid backup
Re-install 0.5.1 and select built-in a2sd
In rom use terminal like bortak stated, but say NO to moving appdata (slowed down my phone a lot)
Uninstall Link2SD
This will give you a standard installation for a2sd.
If I were in you, i would format everything (except SD card first partition) and start from scratch with the built-in a2sd method without Link2SD; you'll have to reinstall everything and lose every data (backup with TB if you can), but you are sure to run a rock solid method to "enlarge you space"
If you are on double FAT32... well, i cannot help you there
Bortak, correct me if i ever say stupids things i want to help out and you surely are a master in troubleshooting and point to my errors
I'm actually running BCM 3.0U0 + 3.0U1 update with m2sd (with apps and dalvik on ext), 100% V6 supercharged and ScrollingCache patched... i have to say, in my opinion, it finally surpassed Sandvold ICS!
Thanks a lot for the help, I've followed the steps and everything's working now!
I used 4ext recovery, which appears to be a lot better than clockworkmod, with more useful options. 4etx said that the partitions weren't aligned (which I previously set in clockworkmod) so I wiped everything and made fresh partitions which were perfectly aligned. I'm using 0.5.2 now with a full format.
I had/have fat32 then ext4.
I've noticed that most apps don't appear to be on the SD card though. Any advice?