Related
Hi, everyone.
Got a Desire 2.1 update-1 branded by Orange ES. Hboot is 0.83. Dunno if it's SLCD or OLED, does it matter anyway?
Used unrevoked to successfully root and installed a custom recovery (unrevoked standard). Right after this the phone wouldn't go past the HTC logo but I could still get recovery screen. I tried a recovery but it didn't work either. From there I tried installing RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_126984_signed.exe (which is the one I want to upgrade from to stock Froyo2.2) but I got a problem in the middle of the installation ( installer says I needed to use the proper file for my phone). Then I used the recovery screen to install a custom ROM, AuraxTSense Froyo and that worked (have it on right now) but from this ROM the RUU WWE installer doesn't work either.
Any suggestions?
You'll need a gold card to use the stock RUU file - otherwise your phone doesn't pass the CID check because it's branded...
driveboy said:
Hi, everyone.
Got a Desire 2.1 update-1 branded by Orange ES. Hboot is 0.83. Dunno if it's SLCD or OLED, does it matter anyway?
Used unrevoked to successfully root and installed a custom recovery (unrevoked standard). Right after this the phone wouldn't go past the HTC logo but I could still get recovery screen. I tried a recovery but it didn't work either. From there I tried installing RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_126984_signed.exe (which is the one I want to upgrade from to stock Froyo2.2) but I got a problem in the middle of the installation ( installer says I needed to use the proper file for my phone). Then I used the recovery screen to install a custom ROM, AuraxTSense Froyo and that worked (have it on right now) but from this ROM the RUU WWE installer doesn't work either.
Any suggestions?
Click to expand...
Click to collapse
The Error code the installer gives me is "131" if that helps. On the phone it shows "CID error, cannot continue". Any ideas what does this mean? Help? Please?
Read my last post...
EddyOS said:
...otherwise your phone doesn't pass the CID check because it's branded...
Click to expand...
Click to collapse
can i flash my =ROOTED- Desire using stock RUU WWE? i already have a gold card...
If you want, it'll remove root though
EddyOS said:
If you want, it'll remove root though
Click to expand...
Click to collapse
now i know.. after flashing to stock RUU WWE, can i still use the unrevoke technique you taught me?
i did flash my phone using stock RUU WWE Europe (as far as i can remember) and thinking to flash WWE Asia... i cant get 3G/GPRS/MMS settings in my carrier.. im thinking if flashing WWE Asia ROM could solve the problem...
Quite possibly yes, and yes you can re-root with unrEVOked once done
thanks again EddyOS ill flash right away
Ok, so now I did a goldcard and the process seems to go a bit further but it stops. It says "Error 104, wrong hboot version - please install the correct version for your mobile phone". Any answers?
to pass the CID check, try this: htcpedia.com/forum/showthread.php?t=2934
driveboy said:
Ok, so now I did a goldcard and the process seems to go a bit further but it stops. It says "Error 104, wrong hboot version - please install the correct version for your mobile phone". Any answers?
Click to expand...
Click to collapse
That now means the HBOOT version you have is newer than the one in the ROM you're trying to flash...What ROM are you trying to flash?
EDIT: If it's still the one in your OP then chances are you'll need the stock 2.10.405.2 RUU to get the generic ROM on the handset. You can get it by clicking on the version on my signature
Hi
I've downloaded an HTC Europe 1.15 RRU that I used before and worked.
Now, however, it wont flash. I just get to the "waiting for bootloader" and then a "connection error". I tried rebooting into bootloader but then the RRU just counts upto 100 and then tells me there is a connection error.
The difference between now and last time is that I've updated my bootloader to Alpha-Rev bootloader and Clockwork Mod Recovery is installed. The phone is rooted and S-OFF as well.
I'm trying to restore the phone to factory condition in preparation for a return to HTC for repair.
I guess I need to resintall some bootloader and recovery mod?? or is that in the RUU?
Any ideas/advice?
Android version 2.2
Baseband 32.47.00.32U_5.10.05.23
Kernel 2.6.32.15-gf5a401c
Build 2.29.405.2 CL263770 release-keys
Software: DJ Droid v1.8 (but also tried latest MoDaco, Pinky, CM6 and LeeDroid)
Browser: WebKit 3.1
HBOOT 0.93.0001
BRAVO PVT3 SHIP S-OFF
MICROP-051d
TOUCH PANEL-SYNW0101
Clockwork Recovery v2.5.0.7
Why do you want to put the FIRST ever RUU back onto your device? Just download the latest RUU (2.29.405.2) by clicking on my signature. This is assuming your phone in unbranded from the start, if not you'll need to get the RUU for your operator
Er, because I said ...
"I'm trying to restore the phone to factory condition in preparation for a return to HTC for repair"
Factory condition means ANY ROM that was meant for the unit - you don't need to go back to the first!!! So long as you're on an x.xx.405.x ROM you'll be fine!!! LMAO!!!
If you just flash the 2.29.405.2 RUU then you're back to stock so the factory will accept it
bloody hell.
saved me a ****ty weekend there pal.
nice1
cheers
will do this tonight and report back.
My HBOOT is 0.93.001 (flashed using alpha-rev clockword mod install utility). Some older RUUs refuse to load (waiting for bootloader and a reboot to bootloader whilst the RRU is still running - doesnt fix the problem). Appears to be waiting for a special signature from the bootloader. Is your link (RRU) likely to work do youo know ??
If you're currently S-OFF, which I assume you are, then get this file instead:
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_151783_signed.zip
It's the same RUU but in ZIP form. Once downloaded remove everything from the name except PB99IMG (so the file is effectively called PB99IMG.zip) and copy it to the root of your SD card. Then boot into HBOOT and it will read the ZIP and ask you to continue. Say yes and once done reboot and you'll be back to stock. Then just remove the ZIP from the SD card and away you go!
Word of advice: I was S-OFF and using the N1Table and the first time I ran this it failed on the System partition and got stuck on the white HTC screen. I left it an hour, ran the PB99IMG again and it completed so if you are on anything other than the stock table I'd go back to that first using the file from AlphaRev before running the ZIP
Either way you should be fine
Yeah S-OFF.
I'm okay with the PB99 - used that when creating gold card and downgrading.
The N1Table stuf is new to me. I'll google that now.
Thanks for the tip and link.
Cheers pal.
**EDIT:
Okay, so N1table is the partition table for sram/nvram chips.
I have not knowingly modified these, but in any event will grab
the stock HTC table just in case. I can only assume the hangup
is generated because the partition table is hardcoded in the RRU
rather than being read in by the RRU - or something like that.
Anyway, thanks once again pal.
[Q] The phone was purchased on the UK Orange network although no branding on the phone (orange square logo and orange applications). The phone was locked to the Orange network and the settings SLIGHTLY different than the unbranded phone my bro has. Will I need to get hold of the Orange RRU before sending to HTC for repair (as in will the IMEI number be registered to Orange or something)?
If it had the Orange ROM on it then you will need that before sending it back...now, an Orange RUU has never surfaced BUT I might know someone getting one today so if I hear anything I'll post back on here.
If you needed a gold card to flash the stock RUU then you will need the Orange RUU
With regards to S-OFF, unless you downloaded and flashed a new table you will still be on the stock Desire one
I used alpha-rev' s-off utility (cant recall the link and didnt save it) but unsure whether the table has been modified. I'll just download the HTC one. Simples.
DAMM. I thought I may need the Orange RUU. Yes, the stock RRU wouldnt install I recall; required a gold card and a bootloader downgrade as I remember. ****!
I've been searching for Orange RUU for months to no avail.
As I said, hold out a day or so as I think someone might be getting it from Orange
Leave it with me...
Acknowledged
My gracious thanks in advance.
Good luck!
Eddy if you get a stock Orange RUU you will be god . Hope you get it.
Sent from my HTC Desire using XDA App
It won't be me but apparently someone is getting an Orange techie to debrand his phone and he's getting the RUU in case he needs to go back to stock...as soon as I hear something I'll update
ste1164 said:
Eddy if you get a stock Orange RUU you will be god . Hope you get it.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
+1 for Eddy being God
EddyOS said:
It won't be me but apparently someone is getting an Orange techie to debrand his phone and he's getting the RUU in case he needs to go back to stock...as soon as I hear something I'll update
Click to expand...
Click to collapse
Hang on; dya mean its possible to create an RUU or backup of a branded Orange phone - as indeed I had before I rooted et.al. ? Oh no, could I have created one - surely not ?
EddyOS said:
If you're currently S-OFF, which I assume you are, then get this file instead:
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_151783_signed.zip
It's the same RUU but in ZIP form. Once downloaded remove everything from the name except PB99IMG (so the file is effectively called PB99IMG.zip) and copy it to the root of your SD card. Then boot into HBOOT and it will read the ZIP and ask you to continue. Say yes and once done reboot and you'll be back to stock. Then just remove the ZIP from the SD card and away you go!
Word of advice: I was S-OFF and using the N1Table and the first time I ran this it failed on the System partition and got stuck on the white HTC screen. I left it an hour, ran the PB99IMG again and it completed so if you are on anything other than the stock table I'd go back to that first using the file from AlphaRev before running the ZIP
Either way you should be fine
Click to expand...
Click to collapse
Nice1 Eddy. The ZIP did the trick. The RRU method didnt work but I expected that as it was looking for an original HBOOT signature.
So, back to HTC stock. Not sure whether they would accept it for repair though given that it was sold as a branded Orange handset. Can they check?
Well, I will give this a go. The reason for the repair is that I've installed god knows how many custom ROMs and:
1. wifi doesnt always work.
2. Data connection errors.
3. Random reboots.
4. 90% reboot when navigating in the car.
5. Failure to answer some incoming calls.
6. Sometimes outgoing calls carry no voice modulation (they cant hear me)
different problems depending on ROMs.
So, lets see how the stock does before I decide to send back/or not.
Thanks again Eddy.
No, the bloke at Orange is going to give the guy getting it debranded the Orange RUU so he can go back to stock if he needs to...
HTC can tell, and my still fix it and put the Orange ROM back on it, but they may also turn around and refuse to fix it due to having a different ROM to the original
You can get to stock Orange with a very complicated method. After debranding you would root the phone. Then apply the backup on my thread. You then remove the superuser.apk with adb. You then flash the two updates orange released this unroots your phone back to stock.
Sent from my HTC Desire using XDA App
Nice1 Ste, however, mine is SLCD not Amoled. The nandroid is from an Amoled handset. Wont work with mine. Nice idea tho.
Anyone have a nandroid from an Orange set??
I'm getting this on my debranded/rooted desire whenever I try to flash back to stock. I used to be able to do it but recently it's started saying this, any idea why?
Thanks
What ROM are you flashing?
I'm trying to flash back to the latest RUU 2.29.405.5.
CID error means you'll need a gold card
I think I used a goldcard to debrand ages ago but I can't remember how to do it, is it easy?
http://android.modaco.com/content/software/308798/pc-application-goldcardtool/
Give that a bash, you may need to register to get the attachment. Your gold card will be needed for ALL updates back to stock so make your day to day card the gold card and leave it in the phone
Sorted thanks mate! Is it worth making a nandroid backup if things go wrong again?
Yes but it will only go back to the rooted ROM. Keep the RUU safe and you can go back to stock if you need to (would've been best to have the actual original RUU for your phone for warranty purposes but meh)
My phone was o2 branded i'm sure there's an RUU about somewhere!
Here, to be exact:
http://shipped-roms.com/download.ph...00.32U_5.09.05.30_2_release_144166_signed.exe
Hi im trying to restore my Desire with factory Rom without root and S-off
Now in Bootloader it says
RAVO UNKNOWN SHIP S-ON
HBOOT - 0.75.0000
MICROP-031D
TOUCH PANEL-SYNT0101
radio-4.05.00.11
mar 5 2010,21:12:15
I tryed many times to flash official RUU
RUU_Bravo_Fastweb_IT_1.15.1600.5_Radio_32.30.00.28 U_4.05.00.11_rel_121996
(my Desire was branded Fastweb)
Everytime there is an error, flashing by bootloader
Main version is older!
Update fail
It shoud happen when HBOOT is newer than RUU , but i think my HBOOT is the right one.
I used goldcard, and then i tryed without but the problem is the same
How can i solve?
The coldcard works by making the phone ignore the CID (customer ID), so that you can install a RUU of ANY brand you wish. It DOES NOT work for bootloader versions, so e.g. once you update your phone to 2.2 (from 2.1), you CAN NOT, go BACK to 2.1 using an older RUU. Hope that helps you to understand it a bit more. As for upgrading your phone, try that:
I don't know whether your phone is GSM or CDMA (since I've never heard of that network) but if your phone is GSM (has a simcard), then use this RUU http://www.mirrorcreator.com/files/...2U_5_11_05_27_release_159811_signed.exe_links
It is the latest WWE (world wide english) RUU so there is no way you will get that error. You need a working goldcard for it to work, but from reading your post it seems you have that covered so you should be fine.
You can go from 2.2 to 2.1 using teppic74's downgrade tool. Its a bit more involved than just flashiong an RUU.
That RUU is in th GSM section on shipped roms, but that doesn't necessarily mean it IS gsm
rootSU said:
You can go from 2.2 to 2.1 using teppic74's downgrade tool. Its a bit more involved than just flashiong an RUU.
That RUU is in th GSM section on shipped roms, but that doesn't necessarily mean it IS gsm
Click to expand...
Click to collapse
Yeeahhh but I said you can't go back using the RUU
and yeah I figured, there's only one BravoC RUU on SR, but I'm just being on the safe side
bortak said:
The coldcard works by making the phone ignore the CID (customer ID), so that you can install a RUU of ANY brand you wish. It DOES NOT work for bootloader versions, so e.g. once you update your phone to 2.2 (from 2.1), you CAN NOT, go BACK to 2.1 using an older RUU. Hope that helps you to understand it a bit more. As for upgrading your phone, try that:
I don't know whether your phone is GSM or CDMA (since I've never heard of that network) but if your phone is GSM (has a simcard), then use this RUU
It is the latest WWE (world wide english) RUU so there is no way you will get that error. You need a working goldcard for it to work, but from reading your post it seems you have that covered so you should be fine.
Click to expand...
Click to collapse
I tryed ur solution, but during flashing there is an error "131 customenr id error"
About the 2nd solution ( downgrade from 2.2 to 2.1) , its right to use it while i have hboot 0.75 (not 0.92) ?
Now i have on Leedroid 2.1.
RUU_Bravo_Fastweb_IT_1.15.1600.5_Radio_32.30.00.28 U_4.05.00.11_rel_121996.exe
So i think i need to have hboot 0.75, and its the hboot i can see in bootloader. Right?
I have to restore it because my touchscreen doesnt work, and warranty end with rooted phones
Downgrade dont work.
When i go in bootloader and i read PB991IMG.zip it says CID ERROR.
I've done goldcard many times, this is what i do:
Format MicroSD 4gb (stock microsd)
Open Gold Card Tool and complete the operation (it says gold card created)
what i do wrong?
When i have to install RUU in bootloader i put inside PB991IMG, so i extract Card and load the file by cardreader.
That error 131 appears everytime but when i try to install Official FASTWEB RUU it disappears and , as i said before, appears BOOTLOADER ERROR
you're either doing the goldcard wrong or your sd-card simply doesn't work as a goldcard.
try this tutorial and try again. http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
bortak said:
you're either doing the goldcard wrong or your sd-card simply doesn't work as a goldcard.
try this tutorial and try again.
Click to expand...
Click to collapse
Bortak thanks thanks and more thanks!!!
I followed ur guide and now i unrooted phone.
I installed RUU 1.15 so now i have phone branded as factory.
Tomorrow i'll go to service, and i hope they will change my touchscreen.
Thanks a lot again
sfidanza2005 said:
Bortak thanks thanks and more thanks!!!
I followed ur guide and now i unrooted phone.
I installed RUU 1.15 so now i have phone branded as factory.
Tomorrow i'll go to service, and i hope they will change my touchscreen.
Thanks a lot again
Click to expand...
Click to collapse
There's a thank button
After breaking my previous desire i got a new one from insurance past friday. I s-off and rooted it with revolutionary and ran the alpharev cm7 r2 partition table. All went fine and i installed the CM 7.2 RC rom and started downloading all my apps and stuff.
All seemed fine untill i shutdown my phone last night and when booting it up this morning it doesn't boot up into anything. I can only get into Hboot and fastboot. I've tried booting into recovery but it gets stuck on the boot screen again.
Now i've read the Q&A troubleshooter posted above here and i have already tried reflashing recovery, which sadly still didn't boot after the reflash.
Now i'm completely stuck on what to do and have been searching for over an hour now.
I've read i could do a RUU for my phone, but seeing as alpharev has protection against that i'm not certain that would even help. What would be the best solution here to get my phone working again. (and if possible with the current data on it , i hadn't made a backup of the full install yet)
Edit: some extra info
Hboot 6.93.1002
Bravo PVT3 S-off
radio 5.11.05.27
CM 7.2 RC
clockwork, not sure newest version for desire afaik
Did you try to remove battery?
yes, seeing as that is the only option right now to turn my phone off .
I also ran fastboot oem gencheckpt to force boot into recovery. The phone got stuck at htc splashscreen. I posted the cmd image information in this post.
when i pulled the battery to shut down the phone, the cmd gave and "error, to many links"
edit:
i ran the alpharev downgrade image to overwrite my hboot and see if i could get into recovery after reflashing that aswell. Sadly this didn't work and after flashing both it still gets stuck at the htc splash screen
i ran the downgrade hboot again and will not try to fix it with a RUU
hmm, the phone is still recognized by the pc, but i have a black screen and can't get it to display anything. did i use a bad ruu or? I"m really confused now :|
after looking in the troubleshoot again i tried to flash the bravo stock from alpha rev, but i'm getting a FAILED <remote: signature verify fail>
well seeing as i most likelly need a goldcard now and don't have another android device laying around i will have to continue this tomorrow or tonight.
if ANYBODY has any advice everything is really appriciated!
what RUU did you flash?
if it was under 2.xx that means you did slcd brick have look here
flash bravo stock from alpharev, then run (if you have a goldcard) the 2.2 WWE RUU, or your carriers RUU (make sure it's the latest one)
Check shipped-roms.com
i think i ran this RUU
RUU_Bravo_HTC_Europe_1.15.405.3_Radio_32.30.00.28U _4.05.00.11_release_121865.exe
which i got from this post, which i now see is terribly out-dated xD.
I got my phone from vodafone in Holland, and i just saw an RUU for bravo that was shipped by vodafone UK which also supports the same radio as mine. Is it a safe bet to use that one for the recovery process?
I wasn't able to run any images right now from fastboot for some reason so i will indeed need to make a goldcard. Will do so tomorrow and report back if i've had any succes.
Thanks for the advise!
OK, so i'm a bit confused by that guide i'm afraid...
I've noticed that in step 4 that i'm unable to enter recovery (no surprise seeing as i was unable before the RUU).
I can boot in to fastboot and hboot i think seeing as i get the "device connected sound" in windows. When i then enter ADB devices or fastboot oem gencheckpt it gives me some information, which can be seen in the screenshot.
What i'm now confused about is, do i still need to make a goldcard, and if so how? I tried running that goldcard creater software but it couldn't pull a CID. Should i create a goldcard by just using a phone of my friend (desire s :|)? Or is it possible to just run the right RUU straight away seeing as i can connect to hboot and fastboot, let that run and when that is finished use revolutionary to root my phone agian.
Attached is the cmd for fastboot oem gencheckpt and adb devices, although normally the fastboot oem gencheckpt finished with a "FAILED <status read failed<too many links>>
Gimme bootloader information, also what state is the phone in now, and what have you tried so far. (quick summary)
My bad just read you last posts.
Try the Vodafone RUU, it should work, don't see why it shouldn't. If that fails, make a goldcard with your friends Desire S, and flash the 2.2 WWE RUU.
If that fails then use the 2.3 RUU.
Ah great!!! I ran the vodafone ruu and atleast now i'm getting fastboot and hboot displayed again.
I'll see how far i can get on my own now. Thanks alot for all your help
Darn, aren't there yet...
I can now get into fastboot and hboot WITH it being displayed so that is already a big plus. However i'm still on a off partition format so i need to flash that back to the original partition format.
I'm S-ON right now so i can't do it through fastboot.
So i made the goldcard through my friends phone and place a PB99IMG.zip containing the alpharev bravostock on the goldcard.
When i then boot into HBOOT it gives me the reading PB99IMG.zip but doesn't give me an option to run the update afterwards. I then checked with the RUU i ran from my pc and created an PB99IMG.zip of that and let it run from HBOOT thus checking if the goldcard was functional. This worked perfectly apart from the partition table being screwed.
How can i now either install recovery from my goldcard while being S-ON or how can i succesfully run the bravo_stock image from my goldcard?
edit: I know i could use the old s-off trick from alpharev but i would prefer to use revolutionary instead seeing as it's more up to date...
k i think i know what to do.
i'll just create a bootable USB with the 1.8 hboot from alpharev on it. S-off my device and restore the partitions to stock.
Then run the RUU again so that my phone returns to stock sense and S-on.
After that i should be the basic root process all over again by running revolutionary etc right?
If you're S-ON. You DO NOT need to touch the hboot, and you can't anyway.
If you've got a goldcard just try the WWE RUU. And if that doesn't fix it then the 2.3 RUU.
That's all you need to do. NOTHING else.
The 2.3 RUU (the vodafone one i downloaded) doesn't work.
I don't think any RUU will work for my seeing as i'm still on the CM 7 r2 partition layout instead of the original sense layout (a little mistake i made when running the first faulty RUU). I'll try to run the WWE RUU first, but i don't think it'll achieve anything.
If i would now run the alpharev 1.8 hboot from a bootable USB it shouldn't put my device at risk right? :|
Edit:
i'm actually getting CID incorrect from the WWE RUU from the troubleshoot thread and from another WWE RUU i downloaded from shipped-roms.com
edit2:
alright, i tried 2 WWE RUUs, which when ran from my PC give me ERROR[131]: customer-ID error and a CID incorrect when done from my goldcard... i also tried alpharev hboot 1.8 but that didn't work either for the obvious reason that you need to boot into android and enable usb debugging and the WWE RUUs for i do not know what reason .
Damn i thought i had figured it out before going to college but aparently i was wrong >.<
i don't know if it's relevant but when i try to boot normally i get the HTC splash screen and it vibrates 7 times in a row...
So i think my goldcard might not be as golden as it should be. Should i try it with my other microSD, the one that i actually use in my phone, an 16 gb kingston?
If so can i use the same goldcard.img or should i create a new one?
bortak said:
If you're S-ON. You DO NOT need to touch the hboot, and you can't anyway.
If you've got a goldcard just try the WWE RUU. And if that doesn't fix it then the 2.3 RUU.
That's all you need to do. NOTHING else.
Click to expand...
Click to collapse
Dear god how many times do I just need to repeat myself.
Just download http://www.htcdev.com/process/legal_download/152 , boot into fastboot mode, then run RUU.exe
There is no vodafone 2.3 RUU, there is only one, and it is unbranded.
Elightos said:
So i think my goldcard might not be as golden as it should be. Should i try it with my other microSD, the one that i actually use in my phone, an 16 gb kingston?
If so can i use the same goldcard.img or should i create a new one?
Click to expand...
Click to collapse
If you still get CID error - you do not have a goldcard. Simple as that.
Elightos said:
The 2.3 RUU (the vodafone one i downloaded) doesn't work.
Click to expand...
Click to collapse
The 2.3 RUU always does something, if not for better than for worse.
ah right i'm sorry, i was a bit confused about that ruu because of some of the information displayed on shipped-rom.com. Prolly read it wrong or something.
Anyway the 2.3 RUU did indeed fix it! quite surprised after all this really didn't expect it! Thanks out a load and i'm sorry for touching a nerve there, it's just the first time doing anything like this so it was all a tad bit confusing!
Elightos said:
ah right i'm sorry, i was a bit confused about that ruu because of some of the information displayed on shipped-rom.com. Prolly read it wrong or something.
Anyway the 2.3 RUU did indeed fix it! quite surprised after all this really didn't expect it! Thanks out a load and i'm sorry for touching a nerve there, it's just the first time doing anything like this so it was all a tad bit confusing!
Click to expand...
Click to collapse
Lol don't worry about it, everyone starts of a newb I remember posting some scare stories of mine a while back of when I first started messing with my phone