Error mounting SD Card - G2 and Desire Z Q&A, Help & Troubleshooting

I've decided to try a new rom today, Iceandfire v1.6. I was previously using sense ginger and just thought I'd try something new since I was bored and curious. I downloaded the rom and gapps and booted into recovery. I wiped data/format and cache aswell as dalvik. I installed from SD card the iceandfire and gapps and reboot the phone. Upon the first boot I got an error saying "Damaged SD card" and suggested I format. So I clicked yes to format but that did nothing at all and just gave me another Damaged SD Card error.
So I said, "OK then, my phone doesn't get along with this ROM, I'll just go back to sense ginger." Rebooted into recovery, started a full wipe again, only this time it gave the error "unable to mount /sdcard/ .android_secure!" and said failed to wipe. So I thought "HMMM!!!" and reboot the phone back into iceandfire rom and wanted to try mounting my card to PC to try formatting that way. I clicked mount and it has been loading since I started writing this post up until about 5 seconds ago and just went back to the previous "Turn on USB storage" screen.
Now I'm out of ideas....If I can't format or mount the SD card, what can I do??
EDIT: As it turns out, the iceandfire rom I flashed turned out to be for the Milestone. I found it in the G2 forum and thought it was for the G2! I thought milestone was part of the ROM name...So I flashed a rom that wasn't made for my phone and now I can't mount SD card. Any solution?
EDIT 2: Was able to wipe the sd card completely, to be honest, I'm not entirely sure how. I put my SD card in another android phone, got the same damaged sd card error, put the card back into my phone, wiped data, successful wipe, went to flash a previous rom, said no files found. mounted the sd card to PC, NO files at all on sd card. Downloading new rom now and will try to flash. Perhaps this thread could help somebody else who might have similar problem. Will edit again once I've tried flashing.
EDIT 3: Unsuccessful. I downloaded MIUI and flashed. It happened to be the only file on SD card after transferring. When I installed it, it just instantly installed, so...it didn't install. So I reboot and now it's gone back to the previous rom, even after wiping data. So perhaps I'm missing some core files? I have NO idea. Should I only need a rom like MIUI for it to work? I honestly don't know. Now that I've rebooted into recovery, there are two new folders on the SD card, lost.dir and Android. I'm formatting again and going to try to flash MIUI again. - It gives the error "Can't open MIUI.zip (bad)". Trying to download "Stock Gingerbread" rom. Will update.
EDIT 4: Once again, unsuccessful. Perhaps I'm overlooking something? Tried two different roms, neither will flash. Atleast I'm able to access my SD card. Does the root apply to internal memory or SD card? I could put a specific rom on my brothers SD card and flash it through there? Perhaps that'll replace the necessary files I might be missing (if that's the case). Please somebody help me. I know this is a lengthy thread, it's just I've tried to provide the most details I could.

EDIT 5: All is well. I used sd card from another phone to install a new rom. Everything is working now.
Sent from my HTC Vision using Tapatalk

Related

PLEASE HELP...Can't get SD Card Swapped!!

I just got a 32GB Micro SD Card for my evo and I am trying to replace my current 8gb card. I was previously running MIUI 11.26 and using clockworkmod recovery. I followed these steps because I couldn't find anything Evo specific:
http://theunlockr.com/2009/10/15/ho...-android-when-using-swap-hero-and-or-apps2sd/
when trying to format and reapply the rom i was using i received this error msg:
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0) (No such file or directory)
Now I don't know where to go from there. I previously had a 16GB card fry because apparently i didn't take the correct steps to get it working properly, i do not want that to happen again. Can ANYONE give me specific instructions for swapping my SD Card for my Evo?? If so I would GREATLY appreciate it!!!
And yes...this is probably rather "noob-ish" and I DID already search the forums for any help and couldn't find what i was looking for. Again any help is appreciated
Thanks!!
just copy all files from your 8g card to the 32g card pop it in the evn and you are good to go, nothing special required. Unless you are using apps to sd, then the easiest way s to put all apps back on the phone, then after switching to the new sd put them all back on the sd.
ifly4vamerica said:
just copy all files from your 8g card to the 32g card pop it in the evn and you are good to go, nothing special required. Unless you are using apps to sd, then the easiest way s to put all apps back on the phone, then after switching to the new sd put them all back on the sd.
Click to expand...
Click to collapse
Yea I tried that and kept getting an error msg. I think there are specific steps for partitioning etc I just don't know them.
Sent from my PC36100 using XDA App
sorry if i'm misinformed but the evo has 2.2/apps2sd built in and 2.2 partitions the sd card on reboot. The article u linked i believe is for devices with 2.1 or ealier and a modded apps2sd . I have swapped many different cards and have not had to do anything that special.
Here are my steps:
1. go into settings manage applications and pull all apps back to phone.
2. copy all files/pics/vids/whatever u want to keep to computer.
3. power off, swap out sd cards, power back on.
4. phone should boot and partition sd or whatever.
5. use astro file manager and if it shows directory for sd, asec, secure then everything is good and u can move apps back to sd.
6. hook phone to sd and move all your kept files from old sd to new sd
I have seen your problem happen with a bad sd card, where did you get the 32g card. You may want to test it and see if it is actually a 32g.
Supersonic Sent
flight01 said:
sorry if i'm misinformed but the evo has 2.2/apps2sd built in and 2.2 partitions the sd card on reboot. The article u linked i believe is for devices with 2.1 or ealier and a modded apps2sd . I have swapped many different cards and have not had to do anything that special.
Here are my steps:
1. go into settings manage applications and pull all apps back to phone.
2. copy all files/pics/vids/whatever u want to keep to computer.
3. power off, swap out sd cards, power back on.
4. phone should boot and partition sd or whatever.
5. use astro file manager and if it shows directory for sd, asec, secure then everything is good and u can move apps back to sd.
6. hook phone to sd and move all your kept files from old sd to new sd
Click to expand...
Click to collapse
Thanks for the response...just a question before i go forward with it, when i replace the card and reboot the phone, is it automatically going to boot up w/ the rom i was using before replacing the card?
Edit: Tried these steps and got stuck in bootloop for MIUI (rom i had flashed previously). Even tried to put the initial PC36IMG file on the sd card and flash it through recovery, nothing! It searched for it then says it directory cannot be found. I've put the 32gb card in my card reader on my computer and it comes up just fine, I can add files to it, format it etc and everything works, any other suggestions...this is becoming highly frustrating! Again any help is definitely welcomed!
So i still cannot seem to get this working, and I've tried doing a lot of different things and nothing is working for me, I have tried to install some sort of file manager program (astro) but it doesn't recognize my sd card, yet my phone shows it as mounted and with plenty of space available. I do not know what else to do...can ANYONE help me?
i had a similiar problem recently. For christmas I received a new sd card. At fist it didn't recognize my card. I tried to format it using my PC but I then went to my recovery (Amon RA) and clicked on the Partition SD card option.
After I partitioned, I turned on USB-MS toggle and put all my files back into the phone (including my rom zip).
I disabled USB-MS toggle, and then wiped data/factory reset, cache, dalvik-cache
Flashed zip from sdcard and violoa. It works!
try that one out.
kakashi_s1 said:
i had a similiar problem recently. For christmas I received a new sd card. At fist it didn't recognize my card. I tried to format it using my PC but I then went to my recovery (Amon RA) and clicked on the Partition SD card option.
After I partitioned, I turned on USB-MS toggle and put all my files back into the phone (including my rom zip).
I disabled USB-MS toggle, and then wiped data/factory reset, cache, dalvik-cache
Flashed zip from sdcard and violoa. It works!
try that one out.
Click to expand...
Click to collapse
I'm going to try that and see if it works, i just went back to Amon Ra today from clockwork. Thanks!
kakashi_s1 said:
i had a similiar problem recently. For christmas I received a new sd card. At fist it didn't recognize my card. I tried to format it using my PC but I then went to my recovery (Amon RA) and clicked on the Partition SD card option.
After I partitioned, I turned on USB-MS toggle and put all my files back into the phone (including my rom zip).
I disabled USB-MS toggle, and then wiped data/factory reset, cache, dalvik-cache
Flashed zip from sdcard and violoa. It works!
try that one out.
Click to expand...
Click to collapse
how would i partition a 8 GB micro sd card with AmonRA?

[Q] SD card not recognized/unsupported filesystem

Ok guys, I've tried to figure this out using other threads on the forum, but I've still come up with nothing!
I'm running cyanogen mod with clockwork recovery AFAIK. Bought the G2 on eBay already rooted, and everything has been working great until yesterday. All of a sudden the phone gives me the infamous "SD card blank or has unsupported filesystem." Argh! I've tried reformatting the card through the OS, and then it tells me to insert a new SD card. Ok, I reboot... annnnnd the same thing again. Next I tried mounting it through the OS. After it's done it tells me the card can't be mounted because it's probably corrupted. Let me just say I don't think that's the case because I was using it RIGHT before this started happening. When I try to connect through Windows and format it doesn't recognize any storage in the device.
So now I'm here. What the heck do I do, xda?! Is there something in the recovery menu I should use? Any suggestion is greatly appreciated, and if you need any more info please ask!
Bump for justice!
Sent from my HTC Vision using XDA App
I have had the same stuff happen to me many times. Download SD formatter on your pc it finds the sdcard and formats it. http://lmgtfy.com/?q=sdformatter
Alright, now it's getting really bad. I attempted to format that card in the computer, but it actually did seem to be ****ed up, in that the computer saw the card once and then it was invisible. Ok, so I order a new 8GB microSD card, arrived today. I format the card using the above program, succesfully, throw it in the phone, and bam, SAME ****ING PROBLEM. What the ****? This is ****ing BULL****.
Now I'm considering re-flashing the phone, but that's a last resort option. Is there something that needs to be on the SD card for cyanogen/CWR for it to even work? I didn't think this was the case, but if it is, WHAT do I need to put on it?
Again, this is quite infuriating, so any help or direction is greatly appreciated.
samuraifez said:
Alright, now it's getting really bad. I attempted to format that card in the computer, but it actually did seem to be ****ed up, in that the computer saw the card once and then it was invisible. Ok, so I order a new 8GB microSD card, arrived today. I format the card using the above program, succesfully, throw it in the phone, and bam, SAME ****ING PROBLEM. What the ****? This is ****ing BULL****.
Now I'm considering re-flashing the phone, but that's a last resort option. Is there something that needs to be on the SD card for cyanogen/CWR for it to even work? I didn't think this was the case, but if it is, WHAT do I need to put on it?
Again, this is quite infuriating, so any help or direction is greatly appreciated.
Click to expand...
Click to collapse
This is what I would do. I would format the card on the computer to fat32 format. On the phone I would boot into recovery and select wipe data/factory reset, then still in recovery I would go to advanced and wipe dalvik cache, and then still in recovery I would go to mounts and storage and format system and format boot. Back on the computer I would re-download the ROM (what you have now may be corrupt) and place the zip on the newly formatted card. Then I would put the sd card in the phone and flash the ROM.

Safe SD format/Clockwork Update/reflash procedure?

I'm currently on CM7 which I flashed over Nightly #38. I'm liking it, but I get some reboots and stuff, so I want to do a fresh flash after wipe.
However, I'd also really like to format my SD card to clear any bad sections on it and hopefully prevent it from getting corrupt (just as a housecleaning item). I figure I also might as well update to the latest clockwork recovery at the same time.
Could someone put down some instructions on how to do these things safely, or post a link? I'm not sure if formatting the SD card will screw with Clockwork recovery, or what order I should do things in, how to do them, etc. REALLY don't want to brick my phone in trying to do the right things!
mobilemedic20 said:
I'm currently on CM7 which I flashed over Nightly #38. I'm liking it, but I get some reboots and stuff, so I want to do a fresh flash after wipe.
However, I'd also really like to format my SD card to clear any bad sections on it and hopefully prevent it from getting corrupt (just as a housecleaning item). I figure I also might as well update to the latest clockwork recovery at the same time.
Could someone put down some instructions on how to do these things safely, or post a link? I'm not sure if formatting the SD card will screw with Clockwork recovery, or what order I should do things in, how to do them, etc. REALLY don't want to brick my phone in trying to do the right things!
Click to expand...
Click to collapse
1 - Download ROM to SD Card.
2 - Copy the contents of your SD card to your computer, so you have a backup!! Very important!!
3 - Update to the latest CWM recovery.
4 - You can have your phone format your SD card, or if your computer has a SD card reader you can format it from your computer. I've done both, with no ill effects.
5 - After the format, boot up the phone and copy the SD card backup that you copied to your computer back to your SD card. Reboot into recovery, and flash the ROM you want to install.
Good luck!
EDIT: The one issue I did run into was when I formatted my new SD card with my computer. I copied my files over from my computer to my SD card, put the SD card into the phone, then booted it. The phone deleted (maybe reformatted...?) the contents of the SD card, and that is why making a back up is so important! I was able to just copy the files back over, and that issue was a one-and-done issue.
Thank you, but I should have been a little clearer in my OP...
I'd really like to just start from scratch with my SD card, i.e. clean it off and start from new. I will be sure to back up the current files that are on there, but there's a lot of crap I don't need and rather than sort through it all, I figure I'll just format and then add stuff back on that I find I need. How do I do that safely? Are things that MUST be present at all times for Clockwork to function, or whatever?
Also, why would I add the ROM on before formatting - won't the formatting just erase the file?
I probably was confusing here: I thought adding the ROM to the SD before formatting, you could then copy everything over off the SD card. You can certainly just d/l the ROM to your computer and copy it over that way too.
CWM needs the clockworkmod folder, which is where things live including any ROM backups you may have.
Depending on the apps you have installed, they may have created a folder. If you don't have those apps but have those folders, you can delete them if they don't contain anything you need. There are folders there that Android will create upon first boot with a freshly formatted SD card.
EDIT: I adjusted my prior post with *hopefully* steps that aren't confusing.

Unable to mount SD and to boot

Hy all,
First, excuse my english, I'm french.
This morning I was on call and suddently, it stopped and my phone freezes. I had to remove the battery.
But know, I'm unable to boot again.
Since I decided to remove the bootlogo, I don't know if it's right after the HTC screen or while booting (I knew it was a bad idea...)
Finally, after some tries, I've been able to access hboot and recovery. But recovery took 46 secs to boot and said "Unable to mount SD card" or something like that. I tried on my computer and the SD card can be accessed.
So, I would like to know if someone had the same issue or if someone can help.
Thx!
Infos :
DHD running CodefireX SR19 and latest radio. No other sign since the release of SR19 some weeks ago.
sounds like you need to reformat SD card on computer. But first copy 4ext folder to computer then format SD. After format SD place 4ext folder back on SD then remount SD to phone see if that helps. You may have to full wipe and reflash rom when you enter recover do to apps moved to SD will no longer be there but may show in rom and when you try to open they will force close.
Sent from my Inspire 4G using xda premium

Unable to Flash ROM, asking for help

Hello all, I recently purchased a new GS4 tmobile variant and have rooted it via Odin. SU shows up in the app section and TWRP installed successfully. My problem is when I attempt to flash a new rom i.e. GE 4.3, I almost immediately get a FAILED message and cant get it installed. I created a backup and have been able to restore so its not been an issue however I really cant figure out where im going wrong. The zip file is on my SD card but no luck... I'm just looking for some direction,
Thanks Andrew
th3h0ff said:
Hello all, I recently purchased a new GS4 tmobile variant and have rooted it via Odin. SU shows up in the app section and TWRP installed successfully. My problem is when I attempt to flash a new rom i.e. GE 4.3, I almost immediately get a FAILED message and cant get it installed. I created a backup and have been able to restore so its not been an issue however I really cant figure out where im going wrong. The zip file is on my SD card but no luck... I'm just looking for some direction,
Thanks Andrew
Click to expand...
Click to collapse
if you installed the rom correctly to the sd card, using twrp, you should be able to do your wipe data factory reset, wipe cash and dalvik, then press install from sd card, choose zip from sd card and install. make sure the rom is on the root of the sd card. when i first started flashing i was having a issue because my device was mounted incorrectly and the rom was not going to the root of my sd card. i started using a card reader that i can mount as a disk drive and send the rom to that. that solved my issues. also i seemed to be having issues with twrp on my device so i started using it and installed clockwork mod touch recovery and things started working then.Also be sure you are trying to install the correct rom for your device variant.i hope this helps some. good luck
realsis said:
if you installed the rom correctly to the sd card, using twrp, you should be able to do your wipe data factory reset, wipe cash and dalvik, then press install from sd card, choose zip from sd card and install. make sure the rom is on the root of the sd card. when i first started flashing i was having a issue because my device was mounted incorrectly and the rom was not going to the root of my sd card. i started using a card reader that i can mount as a disk drive and send the rom to that. that solved my issues. also i seemed to be having issues with twrp on my device so i started using it and installed clockwork mod touch recovery and things started working then.Also be sure you are trying to install the correct rom for your device variant.i hope this helps some. good luck
Click to expand...
Click to collapse
The .zip file is in a folder called ROMS i created on the root of the internal memory. Right now im stuck without anything as my backup seems to have failed now as well. I've flashed many roms before and have never run into this so im stumped! I've tried using both CWM and TWRP but both through a "failed" error. I downloaded both the rom package from the Tmo variant GS4 forum so i think they should be right...
th3h0ff said:
The .zip file is in a folder called ROMS i created on the root of the internal memory. Right now im stuck without anything as my backup seems to have failed now as well. I've flashed many roms before and have never run into this so im stumped! I've tried using both CWM and TWRP but both through a "failed" error. I downloaded both the rom package from the Tmo variant GS4 forum so i think they should be right...
Click to expand...
Click to collapse
I think ive found your issue. You said you placed the roms in a folder, try this, put the rom DIRECTLY on the root of your sd card, NOT in a folder. Give this a try and let me know. I know when flashing with my last device, the rom could not be placed into a folder, it had to be placed directly onto the root of the sd card. So try going back to the computer and mount as disk drive and directly place the rom onto the sd card, then just scroll down to find the rom while in recovery and this SHOULD work. I had a issue mounting as a disk drive so I just used a micro sd card reader and placed my sd card into the card reader, this automatically is recognized as a external disk drive and I'm able to place rom directly to root of sd card this way. When I tried hooking up my device directly to the computer it mounted as a media device and would not allow the rom to be placed correctly on the root. So that's how I got around that. So keeping these issues in mind, try again and place the rom directly to the sd and NOT in a folder and see if your able to successfully flash after that. After I did these things I was able to flash without any problems. Luke I said when I first flashed these were some issues I encountered that was prohibiting me from flashing correctly. Now I don't have any problems flashing. Please let me know if this works out and enables you to successfully flash. Hope this helps

Categories

Resources