Hello
I was hoping that someone could point me in the right direction.
I have enabled the simle 4 digit password on my BA.
On an incoming call the screen becomes available to allow me to answer or reject the call. Normally when I press 'Answer' I can take the call. Then the password prompt will be on the screen.
The problem is that about every second or third call the password challenge won't show up, but the phone application is shown. There is no exit button in the top right corner, I can't make calls, I cant switch it off. The only thing i can do is that I can receive further calls.
The only way to get out of this is by soft-reset.
This happened with the original ROM. So I upgraded to 1.40 in the hope that this would fix it, but it didn't.
I have searched a number of forums to see whether other people have similar problems, but couldn't find anything.
My PDA2k is stock standard, with the only addition being Adobe's PDF reader.
I would appreciate any suggestions to solve this problem (apart from not using a Password challenge), as I'm sick to death of having to reset the device.
Thanks in advance.
Edited an old cab to remove the version limits. It now works on Wm6.
Install and then dial a number from the standard phone dial pad to test! You should feel a short vibrate when you tap a number button letting you know that it's been tapped.
Add it to your CAB file collection.
Cheerio
Howard
What exactly does this do, with Phone Pad? Sounds interesting
It vibrates shortly each time, you press number in dial pad... or I guess, coz it did not work on my TyTN
but mayby is problem with some SPB products, because I have lot of them installed in my TyTN... e.g. phone suite, which can manipulate automatically with sound, vibration and light according to profile settings...
YUP! When you go to the dial screen and tap a number a small vibrate lets you know that a button has been pressed.
I'm also using bunches of SPB programs, but I still get the Vibrate from the standard dial screen.
Cheerio
Howard
sinmae said:
It vibrates shortly each time, you press number in dial pad... or I guess, coz it did not work on my TyTN
but mayby is problem with some SPB products, because I have lot of them installed in my TyTN... e.g. phone suite, which can manipulate automatically with sound, vibration and light according to profile settings...
Click to expand...
Click to collapse
It works on my Hermes but you have to long-press the key. Press for at least a half second to get the vibrate motor spinning.
Also, be sure to set either "short" or "long" tones in the phone options. It won't do anything if set to "none."
Hey thanks for converting to WM6 I had been missing it for awhile now!
Any chance this will work in WM5? Please and thanks.
Yeah this is soooooooooooo useful tip man, thanks a lot !!^^
Uninstall Issues...
I liked the idea, just didn't like the fact that you have to push the button for so long to get hte vibrate to react, just a fraction longer and it turns into a speed dial. So let's talk about the uninstall....
I unstalled the app, everything went normal. Now I have no keypadd tones at all.
hshortt, can you provide a fix or provide the registry keys that this install/uninstall modified?
EDIT: Nevermind, fixed on my own...
Works with the HTC Touch / Vouge. Just had to do a soft reset twice. For some reason after the first time, the touch screen stopped responding.
I'd like to know what you did to get your keyapd tones back, this program sucks!!!
chibull17 said:
I'd like to know what you did to get your keyapd tones back, this program sucks!!!
Click to expand...
Click to collapse
Here is the solution I ended up putting together.
http://forum.xda-developers.com/showthread.php?t=353295
there's a download and some instructions down in the post...
smittyofdhs said:
Here is the solution I ended up putting together.
http://forum.xda-developers.com/showthread.php?t=353295
there's a download and some instructions down in the post...
Click to expand...
Click to collapse
guys i have tried the solution in the above link, it didnt work out.
if i exported the registry files from a non screwd device, and exported to my mine... will it work out?
This program is not very effective, cause when I tap out a phone number naturally I tap it quickly, and you have to hold for at least 300ms (I reckon) for it to even do a little vibrate.
it somehow needs to be much more sensitive, lower ms or something. Maybe its a limitation of the whole vibrate mechanism in the phone anyway.
Oh well.
Lost All Sounds
after installing i lost all sound output from my back speaker
no music, no ringtones, nothing
it only made my phone pad vibrate but screwed up all other sound output
tried to uninstall & still no fix
also hard reset & gflashing ROM again didnt fix
did it screw up my device completely !!!!!!!!!!
any fix please???
Vibrate dial pad
Thank you ! This is just what I was looking for
Sorry.Didn't find how to delete message
Hi pretty neat program, until I found a better one TouchResponse... This one allows you to even select the vibration time, and it vibrates on every tap on your touch screen. Well the problem is I un-installed Phone Pad Vibrate and now the the sound is gone when I press a phone number. The link for the fix isn't working, so how do I fix it so I can get the sound back???
Did the link for removal instructions get moved/removed for this?
The link from above is still broken. Anyone have instructions on how to remove this app?
could someone upload it on rapidshare, because i can´t load it, thank you
Hey everyone, I've searched the thread and hope I'm not the only one experiencing this problem with the Dopod WM6 Rom.
This happens every time I'm on a call and go to my notes to type info, the numeric keys 0-9 activate and I only get numbers when pressing them, and not the alphabetic characters, as soon as I end the call the keyboard returns back to normal.
Any suggestions?
Many people are aware of this problem and currently, there is no fix for it yet.
Some people were saying it isn't a bug, but it was intentionally made so the numbers input during a phone call when your phone is open to dial other numbers. You can always use the on-screen keyboard to type.
Thanks, guess we'll just have to wait then
Hello everyone,
I just bought my ATT tilt 2 and I have a few issues that I would like to address. If you guys can help me address them it would be greatly appreciated.
(1) When I get a call and message at the same time, my phone doesn't stop vibrating even when I am in a call and the other end can hear a buzzing noise.
(2) In my message tab, I have a '1' icon showing that i have a new message but I have no new message. I even deleted all the messages and still it does not go away. Therefore TouchFLO is also showing me '1' new message all the time.
(3) In my previous phone (omnia), I could hit any of the front hardward key to light up the phone then I could unlock it. but that feature does not seem to work in this phone, I have to everytime hit the power key to go in and out, therefore I find no use for the lock feature. I changed the setting for it to never go on standby but then the screen always on (low visibility) and that would probably use up alot of battery.
Any fixes for these problem?
I do not mind changing ROMs but I have no idea which ones are stable and how to go about changing them. I can look up on how to change them but I need to know what people are happy with. I do not want to keep changing ROMs.
Thanks Alot for your help
Have to push power button to wake up device
I have a TILT2 and it sucks to have to push the power button to wake it up. Does anyone know how to modify this?
I would like to push one of the front buttons to wake it up as they are more accessible.
Thanks.
Number 1 is weird. Maybe try a hard reset.
Number 2: Go to Start>Settings>Today do to "Items" tab. Uncheck TouchFlo3D, and check Messaging. Hit OK, and go back to the Today screen. There should be some stupid welcome message from Microsoft in the text messages (for some reason doesn't show in TF3D). Delete it, and you can go back into the Settings and turn TF3D back on. The "1" message icon should be gone
I had the same problem, and this worked for me.
number three:
Try this link from XDA:
http://forum.xda-developers.com/showthread.php?t=578061&highlight=wake+device+button
If you want to wake up TP2 by any hardware keys, please try: HKEY_LOCAL_MACHINE\HARDWARE\OEM\KEYBD "KeyLock" = 0 (default is 1) then Reset..
I flashed Nils' Business Gingersense 3.5 over the weekend but then noticed that I can't change the email sound. I found one other post about this at:
http://forum.xda-developers.com/showpost.php?p=17685787&postcount=2153
but there is no solution there either. I had BGS 3.0 before and ran into issues and decided to try 3.5 instead. When I go to email..menu..more..settings..notification settings, the sound can be turned on and off, but not selected. Under home..menu..personalize..sound, the email sound isn't listed (it was in 3.0). And if I go to Sound set from there, I can see that there is a different sound for email, but no way to change it. Menu does nothing, press and long press just play the sound. Even tried adding a set, and still can't change anything, it just makes a copy of the current set and it's not editable. Trying the "get more" button force closes the sound set application.
One other thing that I noticed is that keypad to enter my pin after clearing the lock screen is only half size. (My work exchange server requires a pin.)
Any help is greatly appreciated,
Kevin
To change your email notification sound, go to: Personalize/Sound/Notification sound/Email
You must tap on "Notification sound" then tap Email. It only gives you the HTC sounds to choose from. As for the pin lock, I have the same issue but I never asked to see if anyone fixed it. I can't help you there bud.
Thanks, SlimSnoop! I figured I was just missing it somewhere, but couldn't find that for the life of me.
I feel better about the pin pad if it isn't me alone. Maybe someone else can help us both. It works, but it would be easier for my fat fingers if it was bigger.
Kevin
My pleasure. On earlier versions of the rom I believe the pin keypad was regular sized. I can't remember though since I just didn't take much issue with it.