[Q] Email sounds in Nils' Business Gingersense 3.5 - Droid Incredible Q&A, Help & Troubleshooting

I flashed Nils' Business Gingersense 3.5 over the weekend but then noticed that I can't change the email sound. I found one other post about this at:
http://forum.xda-developers.com/showpost.php?p=17685787&postcount=2153
but there is no solution there either. I had BGS 3.0 before and ran into issues and decided to try 3.5 instead. When I go to email..menu..more..settings..notification settings, the sound can be turned on and off, but not selected. Under home..menu..personalize..sound, the email sound isn't listed (it was in 3.0). And if I go to Sound set from there, I can see that there is a different sound for email, but no way to change it. Menu does nothing, press and long press just play the sound. Even tried adding a set, and still can't change anything, it just makes a copy of the current set and it's not editable. Trying the "get more" button force closes the sound set application.
One other thing that I noticed is that keypad to enter my pin after clearing the lock screen is only half size. (My work exchange server requires a pin.)
Any help is greatly appreciated,
Kevin

To change your email notification sound, go to: Personalize/Sound/Notification sound/Email
You must tap on "Notification sound" then tap Email. It only gives you the HTC sounds to choose from. As for the pin lock, I have the same issue but I never asked to see if anyone fixed it. I can't help you there bud.

Thanks, SlimSnoop! I figured I was just missing it somewhere, but couldn't find that for the life of me.
I feel better about the pin pad if it isn't me alone. Maybe someone else can help us both. It works, but it would be easier for my fat fingers if it was bigger.
Kevin

My pleasure. On earlier versions of the rom I believe the pin keypad was regular sized. I can't remember though since I just didn't take much issue with it.

Related

ATT Tilt 2 rom problems

Hello everyone,
I just bought my ATT tilt 2 and I have a few issues that I would like to address. If you guys can help me address them it would be greatly appreciated.
(1) When I get a call and message at the same time, my phone doesn't stop vibrating even when I am in a call and the other end can hear a buzzing noise.
(2) In my message tab, I have a '1' icon showing that i have a new message but I have no new message. I even deleted all the messages and still it does not go away. Therefore TouchFLO is also showing me '1' new message all the time.
(3) In my previous phone (omnia), I could hit any of the front hardward key to light up the phone then I could unlock it. but that feature does not seem to work in this phone, I have to everytime hit the power key to go in and out, therefore I find no use for the lock feature. I changed the setting for it to never go on standby but then the screen always on (low visibility) and that would probably use up alot of battery.
Any fixes for these problem?
I do not mind changing ROMs but I have no idea which ones are stable and how to go about changing them. I can look up on how to change them but I need to know what people are happy with. I do not want to keep changing ROMs.
Thanks Alot for your help
Have to push power button to wake up device
I have a TILT2 and it sucks to have to push the power button to wake it up. Does anyone know how to modify this?
I would like to push one of the front buttons to wake it up as they are more accessible.
Thanks.
Number 1 is weird. Maybe try a hard reset.
Number 2: Go to Start>Settings>Today do to "Items" tab. Uncheck TouchFlo3D, and check Messaging. Hit OK, and go back to the Today screen. There should be some stupid welcome message from Microsoft in the text messages (for some reason doesn't show in TF3D). Delete it, and you can go back into the Settings and turn TF3D back on. The "1" message icon should be gone
I had the same problem, and this worked for me.
number three:
Try this link from XDA:
http://forum.xda-developers.com/showthread.php?t=578061&highlight=wake+device+button
If you want to wake up TP2 by any hardware keys, please try: HKEY_LOCAL_MACHINE\HARDWARE\OEM\KEYBD "KeyLock" = 0 (default is 1) then Reset..

disable message, screen illumination, download full email

Hello, everyone;
I've got a TP2 on WinMo 6.5 Pro, and would like to modify it a wee bit to do the following.
First, the signal lost, call dropped window that pops up. I'm an over the road truck driver, and this happens alot in the mountains. Is there any way to disable this silly message?
Second, the backlight always comes on whenever it looses/regains a signal. This is an extreme annoyance, bordering on dangerous, situation when driving at night and I am constantly distracted by the sudden glow from the screen. Can this be disabled?
Finally, emails. Is there a setting that will force the entire email to download, doing away with the tap-here-to-download-entire-message thing?
Much appreciated, everyone, and best wishes for a great day!
Fred
Not sure on 1 or 2, sorry. For 3:
-Launch the inbox (Microsoft version, not Sense). Scroll to Email tab and tap Inbox
-Menu --> Tools --> Options
-Tap on the account
-Tap on "Download Size Settings"
-Message download limit dropdown --> Entire Message
-Download Attachments dropdown --> All attachments
Edit: Not really a solution for the second issue, but if you turn on the "Automatically adjust backlight" feature it won't be quite so bright when it does turn on. Start --> Settings --> System --> Power. Check "Automatically adjust backlight".
Perfect! Issue 3 solved. Thanks, bud.
Anyone for the other two?
entire message
From the inbox of an email account - tap the soft button to the right of the keyboard one (menu?). tap on tools then options - tap on the account you wish to modify. You should see an option for Download Size Settings - select "entire message from the bottom drop down menu then click done.
If you are going through an Exchange Server then run the Activesync app on the phone. Click menu then options. Hightlight "email" then tap on settings. Change the download size limit to "entire message" and ok your way out.
I can't help with the other issues as I am new to this phone too.
Ok. Someone beat me to it.
No worries, mate, thanks for chiming in. You did illuminate another method, and thankfully you two have solved one annoying issue. The others will require entering the registery, I'm sure.
Thanks!
IH8Q8 said:
Hello, everyone;
I've got a TP2 on WinMo 6.5 Pro, and would like to modify it a wee bit to do the following.
First, the signal lost, call dropped window that pops up. I'm an over the road truck driver, and this happens alot in the mountains. Is there any way to disable this silly message?
Second, the backlight always comes on whenever it looses/regains a signal. This is an extreme annoyance, bordering on dangerous, situation when driving at night and I am constantly distracted by the sudden glow from the screen. Can this be disabled?
Finally, emails. Is there a setting that will force the entire email to download, doing away with the tap-here-to-download-entire-message thing?
Much appreciated, everyone, and best wishes for a great day!
Fred
Click to expand...
Click to collapse
On the Email Issue, go to the inbox, tap and hold to bring up the context menu, select Tools / Options, and you can modify the download settings.
settings\sounds and notifications\ notifications tab... in there you can change what different 'events' do.
If there is a setting in your phone for what you want it will be in there.. if not It's likely a registry change you need to do. That I cant help you with as I wouldn't know what you need to change specifically.

Some CM7 and GO DEV TEAM issues

Have been doing a bit more customising and almost set up properly but still a few hanging issues:
cormie said:
Sometimes when I unlock the phone, the brightness is set differently even though the ambience of where I am is the same, sometimes it could be dim and others bright and it doesn't really change.
Not fixed - CM7 issue
The Email app doesn't appear to be the best. It's very dark, is there any brighter theme available or maybe suggestion of another app for pop3 mail?
Not really an issue - APP Issue
I'm using GO SMS and unfortunately I'm still having an issue sending group messages, I've the option to seperate each message to each person into its own thread, sent a small group text, only to maybe 10 people yesterday and it split it into 4 separate threads, only 4 separate contacts who I sent it to as opposed to the 10, so where did the other 6 go? I couldn't check delivery status or anything.
Not Fixed -Possible App Issue, possible CM7 issue
Also with GO Dialer EX, I assume it's because I've over 1,900 contacts, but it freezes quite a lot if I'm going through my contacts/groups/adding new etc. Also you can't see the individual times of consecutive missed calls from one contact and if you have a missed call notification in the notification bar, clicking the notification used to clear the notification and bring you to the missed call screen, now it just brings you to the missed call screen but you have to go back to the notification menu to "clear" the notification, again, this didn't happen in sense and clicking to see the missed calls also cleared the notification. I also miss being able to just open up the dialer, press call on a blank field and it would call the last dialled, also with the way the call log is, I don't like that it groups the contacts together, I much prefer being able to see a log based on time only. Also by grouping the contacts together, you can't just click on a recent called contact and it will go to phone them immediately as you could with sense.
Not Fixed: App Issue, plus now discovered, if you have 2 missed calls, clear the notification and get 1 more missed call, the notification will come up again but say 3 missed calls
I miss the fact with Sense, you just clicked the clock and you got to your stopwatch/countdown timer/alarm straight away. Is there any way to get this back? Clicking the clock now brings me to a screen that isn't much use.
Fixed: App Issue - Got a separate stopwatch/countdown timer app and use stock alarm and using Go Weather widget
The included Calendar app widget has a few annoyances, you can't click a number to go straight to dialpad with from within an event, only 1 event is displayed in the widget and to go into details of that event you've to click into open the calendar first and then into the event. Again, the sense calendar app was better and you could also scroll through the events from the widget itself.
Fixed - Assigned swipe up and swipe down action to open calendar from home screen, this makes it just as quick as before to open the calendar app and gets right into the app, also I can now just click numbers and it opens the dialer, not sure what the issue was before but it's working grand now
Twitter widget is also worse than it was in sense, it only shows one tweet at a time as opposed to sense which you could again scroll down which is much handier if you're looking for say updates from AA Road Watch while stuck in traffic and you can just keep your eyes open for the AA logo on a scroll rather than clicking and clicking and clicking to see if they have any updates.
Not really an issue, I don't even use twitter that much
Calculator is too basic compared to sense one too
Fixed - Real calc
Another thing is I used to like to have "camcorder" shortcut instead of "camera" (I just feel it's better to have instant access to record something rather than photo it). You could easily then switch to camera if you want to photo something, there was no camcorder shortcut so I downloaded one, but it opens only the camcorder alone, as opposed to the same thing that you got when clicking the camera, in which you could easy switch between camera and camcorder. Any way to start that same thing, but just in camcorder mode by a shortcut?
Not really an issue, added camera and camcorder shortcut to home screens
Can someone also tell me if the CM7 "File manager" does the same as Astro? I installed Astro before realising there was a file manager there, guess there's no need for both so can I uninstall astro again? I'm only a very basic user that would be copying/pasting and installing apps via astro, so if this can all be done via file manager, I'll just get rid of Astro
Not really an issue, seems astro is better though, you can select multi select files in a folder to edit.move etc and just looks to be more options in general.
Click to expand...
Click to collapse
A few more issues then using Go Dev Team apps:
on froyo, I had handscent and loved the way if I got a text, the led would be a permanent blue until I read it. I checked this option in go sms too but it doesn't seem to be working at all. I tried flash on at 300ms and then off at 0, I also tried at 300/300 and it didn't seem to flash at all.
Have also noticed a bug in go sms where a different contact name could appear in someone elses text, which happened before with Handscent on froyo, was hoping it would have been fixed. I wonder is it go, or a bug with android itself that's causing this.
Hoping I can sort the above not fixed issues so any advice would be appreciated, the LED notification thing is a strange one, just doesn't seem to work at all for go sms but it may be something conflicting with the CM7 settings or stock settings? Any feedback appreciated!
cormie said:
Have been doing a bit more customising and almost set up properly but still a few hanging issues:
A few more issues then using Go Dev Team apps:
on froyo, I had handscent and loved the way if I got a text, the led would be a permanent blue until I read it. I checked this option in go sms too but it doesn't seem to be working at all. I tried flash on at 300ms and then off at 0, I also tried at 300/300 and it didn't seem to flash at all.
Have also noticed a bug in go sms where a different contact name could appear in someone elses text, which happened before with Handscent on froyo, was hoping it would have been fixed. I wonder is it go, or a bug with android itself that's causing this.
Hoping I can sort the above not fixed issues so any advice would be appreciated, the LED notification thing is a strange one, just doesn't seem to work at all for go sms but it may be something conflicting with the CM7 settings or stock settings? Any feedback appreciated!
Click to expand...
Click to collapse
Note & Thanks
Not sure what your reply means, are you on the dev team for go/cm7 or something? If so, have plenty of suggestions and bugs to report

[Q] Quick Question, Nils 3.5 Business Gingersense

From the lock screen, when I drag any of the camera, phone, or email apps into the ring it opens the appropriate app as I would expect. However when I drag the messages icon into the ring it only unlocks the phone and brings me to my default home screen.
Is this right or is something broken on my end? I have tried to send messages and see if it would work when I had an unread message. It worked at least once and opened messages, but 99% of the time it just unlocks?
Appreciate any feedbak, the ROM is awesome, love it, and this is a tiny issue or question!
Thanks!
Have you placed a different app there then put "Messages" back onto the lock screen shortcuts?
Thanks, adding another, then readding messages seems to have fixed it.
Appreciate the response!
Just to add the app just needs to be remapped, you don't have to change to another and then back, it just doesn't seem to point to the correct one to begin with. My default home screen shortcut didn't work either.
As a noob, it took me a while to find where to change the lockscreen setting. KrisPeezy pointed it out in the development thread http://forum.xda-developers.com/showthread.php?t=1267158&page=193 "menu-personalize-display-lock screen shortcuts"
Figured I'd add it here for anyone else who needs it.

[Q] Vibration Settings not Sticking?

Just got my brand new AT&T Galaxy S III today. I love the phone so far. Right now, the phone is completely stock.
One thing that isn't working correctly is the vibration, most specifically for GMail. I use the Vibrate profile the most since I go to school and would like notifications in class without any sounds. I like the stock "Heartbeat" vibration pattern, so I selected it. When I get new mail, it uses the default "Basic Call" vibration pattern, which I dislike. Although HeartBeat is selected, it uses the Basic Call pattern. I thought it was a GMail issue, so I checked the settings in there, but no luck. I've also rebooted the phone numerous times.
Does anyone know how to fix this?
Thanks

Categories

Resources