Develop Bugs

wmwifirouter on mac

does anyone know how to get it to work on mac? i have version0.91. Ive been trying for hours, if anyone can help I would really be greatful

fliparsenal said:
does anyone know how to get it to work on mac? i have version0.91. Ive been trying for hours, if anyone can help I would really be greatful
Click to expand...
Click to collapse
i found this at howard forums for you:::
I was having the same problem but got mine to work. It seems that when I went in to my phone wifi settings and physically connected to WMWifiRouter - it worked! So, after you do successfully do this - turn on bluetooth pan, start WM Router, and connect.
Before I tried this, my laptop would see the network but not connect. I am getting speeds of 1.5 KBS, and the upload speed is great. It works perfectly with my company laptop and MAC. Also, be careful with battery. Keep your phone plugged in. I love this and will now cancel my Comcast.
find the thread here http://www.howardforums.com/showthread.php?t=1349806

what version of wmwifirouter are you using? i followed your directions but i get stuck on "WLAN is ON! Waiting for ICS" and Internet Sharing is built in ookbas rom. Then the wifi disconnects
My old ibook doesnt have a wifi card, I CAN use this to connect to the internet right? Thanks for the quick response btw.

:::EDIT::::: okay so i did some searching and this is a common problem. only works with certain phones. the only advice i gleemed from it was to try a program called WalkingHotSpothttp://www.walkinghotspot.com/ but unfortunatly it is a one time 24.99 charge. sorry i can't help anymore. i'll search for answers and send you a message if i find anything different
these aren't my directions.. i just gave you a forum link that you might find some solutions. i personally don't have this problem but.... i'm sure with some good google searches you might find something. the guys on howardforums are pretty good with the hardware problems. i'm searching for another article for you also i'll post it as soon as i get it. it may have a solution for you too.

oh man thanks alot, i think it might have to do with the fact that i am using an old version of wmwifirouter. thanks for your help

Just a friendly bit of help.....wifi tether

for those of you looking for a stable wifi tethering app for your newely rooted mytouch slide, and espically if you are on CM6.1 RC2... this works perfectly, ive been useing it for several days without issue...
just thought id share the tidbit to ya all
code.google.com/p/android-wifi-tether/downloads/detail?name=wireless_tether_2_0_5-pre14.apk&can=2&q=

I've been using the same since RC2 (I am now on the latest nightly, but still working).

just so everyone knows, i posted this cuz after a few hours of looking and total fustration, the forms here didnt lead me to a good tether app, so i did some leg work of my own, figured id save everyone time, no credit owed to me.... just being a good CM'er

i know this wasn't the case in the past..
but is there a way to run wifi in infastructure mode? or at least fake it so i can connect to kindle3?
running CM6.1 RC2
thanks.
mangle

try barnacle for the kindle but the one he just posted is a good working one.

these wifi apps create basically an ad-hoc connection, i know theres a way to connect to a pc and then create a hotspot useing the wife then basically bridge the connections, i had to go through it when i had an ipod touch..... its a silly long process but idk if thatd help

I use wireless tether 2.0.5-pre15 with no problems on the latest cm6 nightly, but it's an ad-hoc connection. Need an infrastructure connection for the Nook Color, as well.

[Q] Noob tethering question

I have rooted my EVO and I have WiFi tethering working great, but it is slow eats battery. What is the easiest way to get free USB tethering with the stock ROM and root?
P.S. I know about the apps in the market, I have yet to find a free one that allows HTTPS and works but I have not tried all of them so if you know one works tell me

I know you asked for free... but if you can't find what you're looking for, I have Easy Tether and it works just fine over USB. 3G or 4G, and never drops the connection.

[Q] Slow LTE Tether - Wired & Wireless

I've run Wifi Tether, EasyTether Pro, and ClockworkMod Tether. All give me tethered speeds <= 1Mbps up and down.
This is a Galaxy Nexus LTE with unlocked bootloader and Root. Stock otherwise and no radio update.
Running on OSX 7.2.
I can run the speed test from the same location and get 25Mbps+ while running the test from my phone.
I can do this while running any of the tethering apps as well and I'll still get blazing speeds on my phone, but terrible on my computer.
It's definitely not a USB problem as the computer is USB 2.0 and there are no other devices plugged in.
It's also not a general computer issue as I've tested on other machines, both Mac and Windows.
Anyone have any ideas on how to hunt down the problem?

Looking for any suggestions at all...

I've only run Speed test once while tethering, but my speed was 1Mbps just like you. I should mention that I have a stock SGN and that I have the hotspots option in my plan. My download speed just a minute later using only the phone was 15Mbps.
I wonder if there is some internal throttle in ICS or Verizon's version of it.
Brian
Sent from my Galaxy Nexus using Tapatalk

I do wired tethering via PDANet and average 3 - 5mbps with this phone. It was about the same before & after root. I think it could also be tied in to the radio(reception issues). With past 4G phones I had both better reception and much faster data speeds. I'd say we're probably going to have to sit tight and hope that Verizon releases a fix soon.

It may be related to the stock ROM. I'm running CM9 and get a cap of around 12mbps on wifi tether. Never tested on USB, but I have to assume the cap is due to Wi-Fi limitations.

When tethering via USB, your tether speeds will be limited to the same speed as the slowest USB device connected to your PC at the time. That means unplug all other USB peripherals (where possible) or upgrade them to faster models if you want improve your tether speeds. Koush posted this in his notes somewhere (either in the app description itself on the market, or on his Google+ page) - I remember reading his full disclosure about this issue.
TL;DR version = unplug all USB devices and see if your tether speeds increases. If so, plug them back in, one at a time, until your speeds slow, which can help you determine which device is the culprit. Replace said device with a faster model, or don't use it when tethering.
Edit: I found it! Here's my source for the Tether being limited by your slowest USB device. The quote is here: "Tether speeds slow?
Your USB speed is limited to the speed of the *slowest* peripheral you have connected. It is recommended you unplug any unnecessary/slow USB peripherals to get maximum Tether speeds." That quote is taken right from the app description itself, which can be found alongside the app here: https://market.android.com/details?id=com.koushikdutta.tether

voxigenboy said:
I do wired tethering via PDANet and average 3 - 5mbps with this phone. It was about the same before & after root. I think it could also be tied in to the radio(reception issues). With past 4G phones I had both better reception and much faster data speeds. I'd say we're probably going to have to sit tight and hope that Verizon releases a fix soon.
Click to expand...
Click to collapse
I don't think it's a radio issue. My data speeds to the phone are REALLY high. The only time I have a problem is when the data passes on to the computer. The speed I see on my phone is never an issue regardless of how the phone is configured (to tether). The speed issue is only on the computer side. It's also not a computer issue as I've stated above.
Last I heard, VZW is planning to "fix" signal issues by making the signal icon report a higher value than what it's getting. The DB reading won't change, so they're not lying but they're not telling an honest story either. Surprise!
zehkaiser said:
It may be related to the stock ROM. I'm running CM9 and get a cap of around 12mbps on wifi tether. Never tested on USB, but I have to assume the cap is due to Wi-Fi limitations.
Click to expand...
Click to collapse
I have not tried a custom ROM yet. That is next in my plan.
JFMFT said:
When tethering via USB, your tether speeds will be limited to the same speed as the slowest USB device connected to your PC at the time.
Click to expand...
Click to collapse
Not an issue with my computer. Please refer to the original post.
---------------------
To clarify my response in this post, I'm not attacking anyone's response. I'm only trying to narrow everything down for anyone who may stumble upon this in the future.
Thanks for the input everyone!
I did a backup and wipe. Installed tether and ran before a restore. Same problems...
I will try a different ROM and get back to you all.

I usually get 20 mb/s down on 4bars of LTE, when tethering with wifi tether beta 3 Located Here and i got 6mb/s tethering to an iphone 4s and 2 ipod touches

I agree I have no problems pulling over 25Mbps using the WiFi Tether app that was linked above. I will say that I would recommend going to the site and go under downloads and use the 3.1 pre113 (experimental version). I have found this to be the most stable for me with the best connectivity.

Znomon said:
I usually get 20 mb/s down on 4bars of LTE, when tethering with wifi tether beta 3 Located Here and i got 6mb/s tethering to an iphone 4s and 2 ipod touches
Click to expand...
Click to collapse
Understood.
My issue is not with the tethering software though... something deeper within the system configuration is awry.
I loaded the 'AOKP - Team Kang -Build 15' ROM and tethering is blazing. I guess I'll just bounce around on ROMs until I find the cleanest build that is close to stock.
I considered loading stock and wiping out everything, but I don't want to lose what's on /sdcard/ .
From what I understand, loading the stock ROM will completely wipe.
If anyone knows a way around this, please let me know.

hgray said:
Understood.
My issue is not with the tethering software though... something deeper within the system configuration is awry.
I loaded the 'AOKP - Team Kang -Build 15' ROM and tethering is blazing. I guess I'll just bounce around on ROMs until I find the cleanest build that is close to stock.
I considered loading stock and wiping out everything, but I don't want to lose what's on /sdcard/ .
From what I understand, loading the stock ROM will completely wipe.
If anyone knows a way around this, please let me know.
Click to expand...
Click to collapse
When you are flashing different roms you should always wipe data and cache to avoid any issues. I am using the stock rom and then I rooted with CF-Root through fastboot and have no issue with WiFi Tether. I stock with the 113 experimental as it seems to work the best for me on this set up. I would just copy you sd content and the paste it back over once flashed back to factory.

Right. I was trying to avoid copying the SD content again. I have quite a bit of data... :-/

I switched back over to my stock backup because the custom ROMs I tried all crash when I restore from Titanium. Seems as though they all won't run unless you keep the gapps that the dev includes in the ROM.
After some more consideration, it seems as though my tether is pulling data from the 3G side while the rest of the phone runs happily on 4G.
Any ideas?

http://forum.xda-developers.com/showthread.php?t=1440021&page=2
More info about my problem at the above thread.

Still struggling with this issue...
I have upgraded to 4.0.4 and I noticed speed improvements that lasted the period of the previous weekend. No clue why...
Some other details that might be helpful:
Android-Wifi-Tether is slower than the stock tether with both upload and download speeds slow.
Have tried third party ROMS and experience the same issue. (Slow download, fast upload)
EasyTether Pro now works as you'd expect 4G tether to! Speeds as fast as everything else that runs from my phone.
ClockworkMod Tether is slow like Android-Wifi-Tether. Up and Down speeds < 1M
One server in Columbia, SC on speedtest.net reports speeds > 6M down and 2M up.
Does anyone have any clues as to the difference in the way these two programs operate?
I'm on a Mac and when I first connect I get an error that there is no internet available. I have to turn wifi off and back on from the computer. I leave the phone alone for this.
I've run speed tests on Windows machines with same results
I know someone with a Mifi hotspot that has the same issues I've been describing here. Even with the Columbia, SC server on speedtest.net
Verizon has yet to make contact with him.
Any ideas?

[Q] Wired Tethering Vs Wireless Tethering

Greetings my fellow flashaholics! I have a question, couldnt find nothing really on this particular subject. For the longest, I've been using the tether clockwork mod app (before flashing anything)
Last night, I took the plunged and flashed FreeGS3 v2.0. To my surprise, the tether app did not reset its counter, even after wiping data/fact reset/ dalvik. That is still boggling the hell out of me.
What I want to know is which method drains the battery quicker? USB tethering (altho it will be charging at the same time) or wireless tether even if connected to my wall charger? Im guessing wireless tether because its using the radio and the distance of the broadcasted signal takes a toll on the battery. Reason for my concern is that I do not want my phone feeling like a microwave when tethering, or better yet, I would like to use the method that heats the phone the less. I know I can run trial and error tests, but Im looking for a quick answer.
On a sidenote, any thoughts as to why the tether clockwork mod app didnt reset itself? I did uninstall the app from pc and phone, Im guessing there are maybe some registry info that is still retained, or possibly some traces left thru out android somewhere.