My Evo running warm 2.2 rls 5 with nets 4.3.2 cfs sbc nohavs suv stopped sleeping so I decided to just do a full wipe and reflash the rom/kernel. After reflashing I did absolutely nothing to it (no apps installed, etc) to see if it would sleep and waited for an hour or so and still no sleep. Back to recovery, full wipe, flashed rom only, still no sleep! I had calk 1.7.1 on the SD card so I did another full wipe and flashed that and still it won't sleep!! I'm sure it's not some app because no additional apps are installed and i've never had this problem with either rom before. Any ideas what could be causing this? Let me know if more information is needed too!
dudewithnofood said:
My Evo running warm 2.2 rls 5 with nets 4.3.2 cfs sbc nohavs suv stopped sleeping so I decided to just do a full wipe and reflash the rom/kernel. After reflashing I did absolutely nothing to it (no apps installed, etc) to see if it would sleep and waited for an hour or so and still no sleep. Back to recovery, full wipe, flashed rom only, still no sleep! I had calk 1.7.1 on the SD card so I did another full wipe and flashed that and still it won't sleep!! I'm sure it's not some app because no additional apps are installed and i've never had this problem with either rom before. Any ideas what could be causing this? Let me know if more information is needed too!
Click to expand...
Click to collapse
Could possibly be that your phone doesn't like the PRI you're using. A lot of people had wake lock issues while running the 1.90 PRI, myself included. Downgrading to the 1.77 PRI solved that issue for me right away. I would suggest trying that, if you are indeed on the 1.90 PRI. If you're on 1.77 already, maybe try changing to 1.90. Just make sure when you're flashing the PRI, that you let it finish completely. Its like a radio flash, where you see some different screens and what not, so don't pull the battery!
install Spare Parts. Wait a day or so, then check the battery history in that app, particularly the partial wake usage.
Prl 1.77 seems to work nicely. 1.9 usually gives issues
Sent from my PC36100 using Tapatalk
prl is actually 1.34_003 so i'll have to update that and see if anything changes.
I'm attaching spare parts screenshots for the partial wake...see if that gives anyone ideas until I update the prl.
Even with the updated Prl it won't sleep. Any other ideas of what could be causing this? I'm not quite sure how to read the spare parts screens...nothing looks to be out of the ordinary for to me. Are there any other diagnostics tools i could use to see whats keeping it from sleepin?
dudewithnofood said:
Even with the updated Prl it won't sleep. Any other ideas of what could be causing this? I'm not quite sure how to read the spare parts screens...nothing looks to be out of the ordinary for to me. Are there any other diagnostics tools i could use to see whats keeping it from sleepin?
Click to expand...
Click to collapse
I don't use spare parts too much, so I could be wrong. But where it says 'android system', i thought you can tap that, and it will show you a list of things that have been running. Not sure. As for other types of diagnostic and useful apps for this type of thing, you can try SystemPanel, OS Monitor, Watchdog. There are more, but I think those are the most popular. Are you sure you don't have a runaway app? This happens after a complete wipe (data, dalvik cache, cache, flash calkulins format all.zip) without adding any apps to the ROM? Just the apps that came loaded up with the ROM? Are you logged into facebook, and have it syncing a lot? If it syncs every hour, that could be a part of your problem.
I've reflashed roms and then simply skipped through all the setup screens and then locked the screen and just let it sit for over an hours and it would not sleep so I'm fairly sure it's not a run away app
dudewithnofood said:
I've reflashed roms and then simply skipped through all the setup screens and then locked the screen and just let it sit for over an hours and it would not sleep so I'm fairly sure it's not a run away app
Click to expand...
Click to collapse
Weird. When did this start happening? Any notable time?(any changes you made around when it started happening?) You already confirmed which PRI you were on, and that you updated that. Have you checked your radio version? Maybe if that is also old, as your PRI was prior, then the PRI and the radio aren't jiving. I would make sure that all your radios are updated at this point. All Evo radios, wimax versions, pri's, and nv's are on this page. http://forum.xda-developers.com/showthread.php?t=715485 . You can flash a combo if you want, and flash them all at the same time. If it still does it after making sure that all your radios are updated, and you are using a rom with the latest 3.70 software, then I am at a loss and I apologize. Up to date radios, a clean install of a ROM after a COMPLETE wipe should yield an Evo that sleeps like a rock.
Sleep issue fixed!
k2buckley said:
Could possibly be that your phone doesn't like the PRI you're using. A lot of people had wake lock issues while running the 1.90 PRI, myself included. Downgrading to the 1.77 PRI solved that issue for me right away. I would suggest trying that, if you are indeed on the 1.90 PRI. If you're on 1.77 already, maybe try changing to 1.90. Just make sure when you're flashing the PRI, that you let it finish completely. Its like a radio flash, where you see some different screens and what not, so don't pull the battery!
Click to expand...
Click to collapse
Downgrading the PRI from 1.90 to 1.77 resolved my rooted EVO not sleeping issue. I am using the stock 2.2 ROM rooted with unrevoked.
Sleep issue also fixed
Hey,
Just wanted to say I was also having the issue about my EVO 4g not sleeping. I'd unrooted and then re-rooted my phone, and noticed my up time and awake time were the same. Downgraded to 1.77 and immediately my phone slept.
Back down to <10% awake time (thank GOODNESS) lol.
Preciate ya!
I would thank ya, but I can't...yet lol
Sorry, I'm a total noob, what exactly does sleep mean for a phone cause I'm having issues with my evo too with no battery life and I'm running on Myn r. 5
Related
I am having several major problems with my phone ever since I tried flashing some new stuff over the Skyraider 3.3 final ROM!! Everything was fine, except for the extremely excessive battery drain after I installed the ROM the first time. Then I flashed a splash zip and also the blue battery circle zip and last but not least the #5 kingxklick bfs kernal. Ever since then my phone has gone berserk. When I hold down my power button, not only does the screen for all of the options(hibernation, power down, reboot, etc..) not come up, it just goes straight to my bootanimation screen and it boots back up. Also, the excessive battery drain has gotten worse!! So, I booted back into recovery and did a restore. This seemed to stop the craziness of my phone, unfortunately it still just reboots when I hold the power button down and the excessive battery drain is still going on!!! Anyone have any suggestions? I'm afraid to do anything else because it seems that I have done enough for right now top screw it up!
Make sure you're not overclocking more than your phone can handle (if at all).
I'm running this same combo (SR 3.3/Kingxkernel BFS #5) and it's working quite well for me with good battery life.
If you choose to reinstall, do a complete wipe/cache wipe *twice* from the recovery menu before flashing.
First of all, Thank you very much!! I know this is a dumb question, but how do I check to see if I'm overclocking? I don't know how to do that, obviously. Ha.
that rom is dependant on radio, and HBoot being up to date. If you don't meet both, you will have problems. I had all sorts of issues with 3.3 when I installed it only to find you have to have s-off, 2.15 radio, and .79 Hboot. The reboot problem is more than likely the Hboot, anything below .79 frow what I understand will not support the new hibernation modes, which causes the reboot.
SoCGHOST said:
that rom is dependant on radio, and HBoot being up to date. If you don't meet both, you will have problems. I had all sorts of issues with 3.3 when I installed it only to find you have to have s-off, 2.15 radio, and .79 Hboot. The reboot problem is more than likely the Hboot, anything below .79 frow what I understand will not support the new hibernation modes, which causes the reboot.
Click to expand...
Click to collapse
I was using the hibernation mode every night since it came out on .77 HBOOT with no issues. I only just now updated HBOOT cause I got bored and wanted the newest one lol.. But yeah, was I just lucky? :/
Sent from my Droid Incredible running SkyRaider 3.3.2 with King Kernel BFS #5.
HW version 0003
Myns release 4
3.30.651.3
HTC Kernel 17
Washington DC area
for some odd reason i have no data. no 3g, 4g, only wifi. updated profile and prl. Did the ##data# reset in edit mode with the PRL. Shut off and let sit without battry for a while.
Any ideas?
changed kernel to netarchy 4.1.9.1 cfs and put the new radio and wimax radio on...same thing
munsterrr said:
changed kernel to netarchy 4.1.9.1 cfs and put the new radio and wimax radio on...same thing
Click to expand...
Click to collapse
flash a stock rom.
munsterrr said:
changed kernel to netarchy 4.1.9.1 cfs and put the new radio and wimax radio on...same thing
Click to expand...
Click to collapse
Don't resort to flashing radios you can really screw up your 4g.....Did you try factory reseting your phone but back everything up first and see if that works if not try flashing a stock rom or a ruu.
Update Profile/PRL. If that doesn't work, flash a stock RUU and Update Profile/PRL. If that doesn't work do a ##786# reset. That should get you up and running.
If you still have problems post back and I will point you in the right direction to fixing your data profiles.
I also have the same problem using myn rls4, but have net 4.2.1 cfs HAVS more kernal. Out of nowhere the data will just cut out and stop working. I will try some of the suggestions in the thread.
Did any of out suggestions work for you?
h2o-pr00f said:
I also have the same problem using myn rls4, but have net 4.2.1 cfs HAVS more kernal. Out of nowhere the data will just cut out and stop working. I will try some of the suggestions in the thread.
Click to expand...
Click to collapse
well i went back to CM 6.1(newest build) and about 45 minutes ago it happened again while i was at the bar. guess imma go to a non rooted RUU to see what happens
not to be "that" guy but one bump for a hopefully permanent fix.
As much as half of us have a rom flashing addiction. I cannot do this every day lol.
munsterrr said:
well i went back to CM 6.1(newest build) and about 45 minutes ago it happened again while i was at the bar. guess imma go to a non rooted RUU to see what happens
Click to expand...
Click to collapse
If that doesn't work. Call sprint and tell them your phone is having really slow data and it's going in and out tell them it happened after updating your phone through system update then they will say it's due to software update and they will send you a replacement next day.That is my suggestion because you don't want to screw something up that might be noticeable trying to fix your current evo just get a new one and start over with everything updated. I hope I was helpful
I did this, using the debug menu once. I reset all data and then it wouldn't update my profile so I couldn't access my 3G and the web data was gone. I tried to update my profile/prl and it wouldn't, kept timing out.
Every time I would reboot the handset it would try to update automatically but fail. It turns out the rooted rom I was on, (Fresh EVO) was interfering with the update. I flashed the stock RUU...then the phone attempted the same update profile, and afterwards it was back to normal.
So try going back to a stock rom, and then if it doesn't automatically try to update your profile, go to your settings and do so manually, should do the trick.
Basically do what APH noted in his post...sorry must have skipped your posting.
This same thing happened to me on the Hero. I RUU'd back to Sprint's crap and then called them. They walked me through some things and then told me to take it in. The repair guy did the same thing I did (RUU and then data fix) and it started working. So, if all else fails, RUU and bring it back to the store.
thank goodness i have a long weekend. Guess if the new PRL update doesnt fix this then ill head over.
Im not a noob but this is a problem that i cant solve. I had to jus recently re root my phone. Flashed my 1st rom and phone would show same time for up and awake time sometimes awake time would be a fraction of a second more than up. ****in weird. Pulled battery... problem still persisted. flashed a few other roms also restored a nandroid(jus a week old) to see if it would stop. no go. Maybe I need to re root again?
stock htc kernel 15
rom- currently mikfroyo 4.30. tried calk's evio 1.7.7. and my nandroid back up was calk's evio 1.7.5
vlug said:
Im not a noob but this is a problem that i cant solve. I had to jus recently re root my phone. Flashed my 1st rom and phone would show same time for up and awake time sometimes awake time would be a fraction of a second more than up. ****in weird. Pulled battery... problem still persisted. flashed a few other roms also restored a nandroid(jus a week old) to see if it would stop. no go. Maybe I need to re root again?
stock htc kernel 15
rom- currently mikfroyo 4.30. tried calk's evio 1.7.7. and my nandroid back up was calk's evio 1.7.5
Click to expand...
Click to collapse
Do you have the latest raidios updated? Alot of people have been having issues with the NV and PRI being 1.90. Try downgrading that and see if it helps
my pri is only 1.34 so maybe i should try the latest radios
vlug said:
Im not a noob but this is a problem that i cant solve. I had to jus recently re root my phone. Flashed my 1st rom and phone would show same time for up and awake time sometimes awake time would be a fraction of a second more than up. ****in weird. Pulled battery... problem still persisted. flashed a few other roms also restored a nandroid(jus a week old) to see if it would stop. no go. Maybe I need to re root again?
stock htc kernel 15
rom- currently mikfroyo 4.30. tried calk's evio 1.7.7. and my nandroid back up was calk's evio 1.7.5
Click to expand...
Click to collapse
Also, do you use 4g? There is a known bug, that when you turn 4g on, and then toggle it off, that the radio remains scanning, and holds a wake lock. So you have to turn 4g off and reboot. Just throwing some things out there.
I am having this same problem, I thought it might have been some thing in Juice Defender... but my screen setting is set right and everything... I have to manually shut the screen off by pressing the top button... if I dont - it just dims to very low brightness and stays on...
I am having the same problem as well. Never had but had to switch evo's due to my old one dying. My new one always stays awake. I have tried four different rom's, same thing. I killed my old one updating radios so I am hesitant to do that again. Any other ideas? My am out and this phone is almost useless in this state. The battery life is down right atrocious. I hate to get rid of it but if this can't be corrected I won't have a choice.
I flashed the ROM a few nights ago and followed the instructions regarding flashing the new Radio pack but after noticing that 4G just wouldn't turn on I tried going back into recovery and flashing the .zip again. Still didn't work.
Eventually I restored the previous backup because of an unrelated data-loss incident. I restored the backup I made of Warm and tried re-flashing the radio .zip but it still wont work, anyone care to point out what I'm doing wrong?
I've tried searching the ROM's thread but "4g" must not be long enough to search for, and "radio" yielded no help either. I would've posted this there but evidently I need 10 posts before I can post to the Dev forum(A new rule?).
Thanks for reading!
What's your phone information(build,kernel,hboot)?
I thought that stuff was controlled by the ROM developer. It's on HTC kernel 15, build is warm 2.2 RLS 5.
Sent from my PC36100 using XDA App
As it turns out, last night I was able to turn 4g on, but I'm no longer able to do it now. Anyone know what's up?
Sent from my PC36100 using XDA App
I had the exact same problem as you. This just happened out of nowhere which is even more weird. The rom was working fine and then all of a sudden it just stopped allowing me to turn on 4g. I get the scanning then disconnect really quick. Or I get turning on and turning off over and over again. It shows really quick.
What I did was I flashed back to stock with an old nandroid. I went to a area without 4g and tried to let it connect. Of course it couldn't. I then updated my profile 4 times. I flashed back to another rom and it is working again. Still a little buggy but way better than not being able to connect at all.
Jjday7 said:
What I did was I flashed back to stock with an old nandroid. I went to a area without 4g and tried to let it connect. Of course it couldn't. I then updated my profile 4 times. I flashed back to another rom and it is working again. Still a little buggy but way better than not being able to connect at all.
Click to expand...
Click to collapse
Did you go back to Warm? And what profiles are you talking about exactly, and what does that do? I like this fRom a lot so I'd hate to have to switch.
Sent from my PC36100 using XDA App
motherboyxxx said:
Did you go back to Warm? And what profiles are you talking about exactly, and what does that do? I like this fRom a lot so I'd hate to have to switch.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
I have been bouncing back and forth between his and mikfroyo. You go into settings and go to system updates and update profile. When it's done hit ok. Do that a few times and restart the phone. See if that works. It took me days to get mine working again. I think it was from flashing from rom to rom all the time and updating and upgrading the radio's that caused the problem. I don't think it's his rom that is causing it in my case at least. Good luck
My standard process when flashing roms and kernels has always been and will be when im done with the flashing . Setup widgets and where I want them , apps , general settings etc etc etc . Then perform Update Profile followed by Update PRL . When those processes are done I usually let the phone settle down some then do a reboot . Again let the phone settle down from the reboot . Then check your 4G connection it should work . My only advice is to stick with roms running off the newest radios . That way you cut out flashing radios causing possible issues with 4G .
So i am having issues with this ROM and was wondering if anyone is having the same issue. Well i see that my awake and run time are the same and spare parts is showing 100% usage on the CPU.
ive tried using all the different kernels to no success.
any help would be appreciated.
Myn's warm 2.2 RLS 5
updated radios
kings 11
I've installed Myn and my 4G doesn't work. It switches between on and off really fast and then sometimes it'll go further and scan, connect, disconnect, and repeat.
Specs: myn's warm TwoPointTwo (RLS5)
Baseband: 2.15.00.11.19
Kernel: 2.6.32.25-netrarchy-toastmod-4.2.1-cfs-bfq-havs-more-smartass
PRI version: 1.90_003
PRL version 60674
NOTE!! I've already checked if my RSA keys have been lost and they haven't.
Any tips would be grateful, I'm going to flash Fresh tonight and hopefully it works.
Jj, and SouthernEvo, thanks for the tips! I cracked the glass on my phone and just got a replacement, when I flashed the radios I didn't get the images the dev said I would: "While the radios are flashing you'll see a little green arrow phone icon for a bit afterwords, Wait on this. You will then automatically be taken back to recovery."
If this time around it doesn't work again I guess I'll try flashing a re-downloaded Radio package!
running_onCode, seems that we might be having the same issues, did you notice anything strange while flashing the radio package? Like I said on this second Evo, when I flashed it I paid attention and didn't get any green exclamation points.
I have this problem as well. I've used the app that checks for the RSA keys and it says I'm good. I've also checked via a console app.
What happens is exactly like everyone else here. Once the WiMax radio is turned on it'll scan for 3-5 seconds, then it says connecting to Sprint for about .5 seconds, then it says disconnect, and repeats. I've flashed and reflashed with the latest radio pack at the top here: http://forum.xda-developers.com/showthread.php?t=715485 . I did that so I could run Myn's Wyrm RLS5. H boot has not been flahed ( think I have a really old version). I've tried different ROMs and there is no difference. I tried going back to my previous ROM and it still didn't work. I tried updating Profile and PRL 5x and doing a shutdown>reboot and there was no change. Any help would be great.
I tried
Standby time: 10
Scan Rate: 30
NAI: [YourMAC]@sprintpcs.com
User Name: your sprintpcs.com account
Realm: sprintpcs.com
Center Frequency: 2647000, 2657000, 2667000
Bandwidth: 10, 10, 10
NAPDIS: 000002
NSPDIS: 000004
Wimax_Scan_Attempt_Timeouts: 1
Wimax_Scan_Retrys: 15
Wimax_Idle_Sleeps: 10
Wimax_Entry_RX(RSSI): -98
Wimax_Entry_CINR: 4
Wimax_Entry_Delays: 0
Wimax_Exit_CINR: 1
Wimax_Exit_Delays: 15
Handoff Threshold: 0
Idle Mode Timer: 0
TLS: Enable
TTLS: Disable
and theres no change
motherboyxxx said:
Jj, and SouthernEvo, thanks for the tips! I cracked the glass on my phone and just got a replacement, when I flashed the radios I didn't get the images the dev said I would: "While the radios are flashing you'll see a little green arrow phone icon for a bit afterwords, Wait on this. You will then automatically be taken back to recovery."
If this time around it doesn't work again I guess I'll try flashing a re-downloaded Radio package!
running_onCode, seems that we might be having the same issues, did you notice anything strange while flashing the radio package? Like I said on this second Evo, when I flashed it I paid attention and didn't get any green exclamation points.
Click to expand...
Click to collapse
Yeah, it seems like we do have the same issue. I'll flash Myn's rom when there is a fix for the 4G or maybe it's just our phones? I got tired of waiting so I flashed MikFroyo and everything is working. I was using 4G a couple minutes after leaving my house yesterday.
Yeah I'm thinking of just flashing another ROM, can't get much help without posting to the ROM thread itself and I guess I can't do that anymore!
It's too bad though, the first time around I had amazing battery life, but this time it's a lot worse
Are you using Titanium Backup? I had the same problem when I used TB, I would wipe everything, flash Myn's rom and them restore all my apps using TB and 4g would not turn on at all, RSA keys were intact but no 4g. I actually did a Nand backup before running TB and after using TB and trying to restore Nand 4g still would not work!
It actually took a while before I figured out it was TB borking the 4g (3-4 installs and reboots). I had to write down all my backed up apps and download them one by one
Hope this helps!
Jfree3000 said:
Are you using Titanium Backup? I had the same problem when I used TB, I would wipe everything, flash Myn's rom and them restore all my apps using TB and 4g would not turn on at all, RSA keys were intact but no 4g. I actually did a Nand backup before running TB and after using TB and trying to restore Nand 4g still would not work!
It actually took a while before I figured out it was TB borking the 4g (3-4 installs and reboots). I had to write down all my backed up apps and download them one by one
Hope this helps!
Click to expand...
Click to collapse
Can anyone confirm this? I'd love to go back to Myn's Rom.
Sent from my Supersonic MikFroyo using Tapatalk.
Jfree3000 said:
Are you using Titanium Backup? I had the same problem when I used TB, I would wipe everything, flash Myn's rom and them restore all my apps using TB and 4g would not turn on at all, RSA keys were intact but no 4g. I actually did a Nand backup before running TB and after using TB and trying to restore Nand 4g still would not work!
It actually took a while before I figured out it was TB borking the 4g (3-4 installs and reboots). I had to write down all my backed up apps and download them one by one
Hope this helps!
Click to expand...
Click to collapse
As a matter of fact I am using Titanium! So I should flash the rom and install the apps one by one or what? That's not really something I'm looking forward to
motherboyxxx said:
As a matter of fact I am using Titanium! So I should flash the rom and install the apps one by one or what? That's not really something I'm looking forward to
Click to expand...
Click to collapse
I doubt it is titanium, I had the same problems with RLS 5 not getting 4g. Have used titanium on Calks, Mik, and Azrael without having 4g scanning / disconnecting issues. There was a fix for this a couple weeks ago, somewhere. Too much for me so I moved on. Ricsim said that battery life is 97% driven by the kernel, not the Rom.
Bump! Anyone?
Hey everyone. I haven't been working with custom ROMs for long, so I'm a little lost with what I might be missing here.
Phone:
Sprint HTC EVO 4G
Cyanogenmod 7.0.3.1
Android Version: 2.3.3
Baseband Version: 2.15.00.11.19
Kernel Version: 2.6.37.4-cyanogenmod-01338-g0374804
Mod Version: CyanogenMod-7.0.3.1-Supersonic
Build Number: GRI40
Problem:
I recently updated from CyanogenMod 6 to CyanogenMod 7. Since then all heck has been breaking lose on my normally happy Evo. I was extremely pleased with CyanogenMod 6 due to better battery life, faster operation, better features than stock, etc. However, since the update to 7, I've been experiencing the following problems... but I do have to say 7 it's beautiful!
Battery life now sucks... BAD!
* Went from 1 charge a day (or less) to multiple per day and there's less software on it than before.
* Battery history indicates the radio is consuming 48% of battery.
Data has been terrible and now no longer works at all.
* I no longer have even 3G, but only shows white "1x" on status bar.
* Wi-Fi is now the only means I have to consume data.
4G/WiMAX commonly doesn't stay connected either or allow data.
GPS is out to lunch. It skips all over the place and loses signal every few seconds.
Questions:
Do I need to update the radio?
If so, where do I find either the latest or appropriate version for use with CyanogenMod 7?
Are there updates to 7.0.3.1 that will fix battery life & other issues?
Some forums were saying to run PRI, but I haven't had that since my phone was stock. How do I obtain that?
Given my phone's info above, would you recommend I install or update anything else?
Thanks in advance for all the help!
Flash to this:
http://forum.xda-developers.com/showthread.php?t=1078558
You wont regret ;]
tropicalbrit said:
Update all radios. Check my sig for a link.
Flash a rooted Sense ROM, based on the Evo (this disqualifies MikG, Director's Cut, Synergy and other Sense 2.1 ROMs, because those are based on the Evo Shift (I've had issues with Shift-based ROMs not reprovisioning data). Update PRL. Reboot.
Go into EPST (Dial ##3282#, Choose edit mode), enter your MSL code (download and use MSL Reader from the Market to get it), Data Profile, hit the menu button and choose restore. Just sit there, your phone will reboot and everything will go back to default. Let it reprovision, but when it says "Updating PRL" hit cancel.
Wipe everything in recovery, flash ROM of your choice.
Use 3G Supercharger if you want.
You can try those things above to see if they do any good.
Click to expand...
Click to collapse
Try Deck's as suggested above. He is a great ROM developer and often updates. I personally use SavagedZen kernel when on his ROM. For a flashable GPS fix, see my sig.
Sent from my PC36100 using xda premium
Sent from my PC36100 using xda premium
For battery try out a different kernel like tiamat 3.3.7 or 4.0.6, SZ 2.2.1 those seem to be the best ones you can try the sbc versions you'll get a little more life out of them you can find them on kernel manager from the market.
You can check this out for your radios.
http://forum.xda-developers.com/showthread.php?t=1128135
You should find every GPS fix here.
http://forum.xda-developers.com/showthread.php?t=1132412
Sent from my PC36100 using XDA App
@Shadow,
In order to answer you actual questions:
YES! Update your radios from Calkulins thread:
http://forum.xda-developers.com/showthread.php?t=715485
Grab the latest update, youll be happy. This will update PRI as well.
There is a RC1 of CM 7.1, which is pretty good. Based on 2.3.4 which is just improved GB. Though it is not considered a stable release yet, if that is what you are looking for.
Considering this gets your signal working proper you should notice imedeate results for battery life. I would recommend the Battery Calibration app from market, follow instructions.
The above GPS link is good, exactly what you should look into. I recommend the Qualcom 1.1 works great every time. However, after flashing new radios check your GPS again to see how it is working. Once that is solved, get GPS status from market and check out all the features it has. It can clear GPS cache, download "assistance data" and give you a precise time it takes to lock on to better diagnose GPS issues.
Lastly, you may want to consider doing a clean install, doing a FULL wipe using a wipe all .zip and clear user data, cache and dalvik. Not sure if you did this the first time, but it helps to avoid any errors from leftovers from your previous ROM.
Since you are going to update your radios, I would recommend updating it thru HBOOT just update with sprint lover's rom here http://forum.xda-developers.com/showthread.php?t=830153
Just load up the PC136IMG and let it update and then install the rom of your choice afterwards or nand restore a back up of your desired rom.
Personally either way you update should be fine, but HBOOT seems a bit safer.
Wow, you guys are amazing!
shawayne21, thanks I appreciate the recommendation. However, I'm not currently in the market for another ROM. I just want to get what appear to be mostly radio issues resolved. I have tried several other ROMs when I rooted my EVO and immediately fell in love with CyanogenMod. I will keep this in mind for possible future ROM explorations though. Thanks again!
TropicalBrit, thanks a lot for that repost. There is so much content on this site that it's difficult for a noobie like myself to pick out what the most appropriate information is for a particular situation. However, as time goes on and I get more experience I assume that will change.
I will perform the items TropicalBrit reposted and let everyone know how it goes! Thank you immensely to everyone who took the time to help me out! Cheers!
Sounds like you might need to perform a complete and thorough system wipe, preferably using one of the formatting zips.
Then reflash your rom, flash a better kernel, and download your apps fresh from the market.
I've had great success with Tiamat 3.3.7 sbc and Savaged Zen 2.2.1 bfs sbc, running the same baseband as you on hardware 003.