Related
I've checked out Sprint stores and Best Buys and nothing but those universal car mounts. Anyone hear anything about when the nice one that leaked out awhile ago is coming out?
It's not out yet of course, but I think I'll get one of these when they are released. Especially since it's about the only one I've ever heard of for any phone that will work with no case or with a case. Apparently it has a removeable plate to make room for the Seidio case. And since it has an AMPS mount, I can mount it to the car specific mount I have.
Can't wait to see if it all is as good as it looks when it actually is released.
I'm going to eventually get a proclip mount for my Evo. I obtained a no-name custom bracket for my S2000 through an S2000 forum that has standard mounting holes (mount any clip that attaches to standard mounting patterns).
They don't have a clip to fit the Evo yet, but I shot them a message and they will email me when it is available. I went the same route with my Hero and it took about 3-4 weeks after release for them to release the phone clip mount.
I would like to see one from http://www.arkon.com/
they all look good including the official one. im waiting that battery case thing...and then ill make my decision from there.
ZUUL42 said:
It's not out yet of course, but I think I'll get one of these when they are released. Especially since it's about the only one I've ever heard of for any phone that will work with no case or with a case. Apparently it has a removeable plate to make room for the Seidio case. And since it has an AMPS mount, I can mount it to the car specific mount I have.
Can't wait to see if it all is as good as it looks when it actually is released.
Click to expand...
Click to collapse
That mount sounds pretty sweet.
the official one is supposed to be the end of july
Anyone found a good car windshield mount for using GPS?
All the ones I've seen looks like they'd block view and are all designed to hold it vertically. (Would be be afraid of it falling out if there were not support on all 4 sides)
here's the samsung OEM one, probably the most secure but i just don't like the amount of visual "real estate" it takes up - ie too likely to block view of the road http://www.samsung.com/us/consumer/...ype=acc_detail&subsubtype=car-kits&returnurl=
i ordered one of these, fairly cheap, and it is a 3 point grip, off ebay, but figured it would serve till i decided which one i wanted to go with
might just make out of fiberglass to mount low on top of the dashboard (ie no pedestal)
same seller on ebay has two others, one is very similiar to the samsungs in term of the pedestal and the other is vent mount
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190409500795&ssPageName=STRK:MEWNX:IT
http://www.amazon.com/gp/product/B00343295O/
I'm thinking about this one. I don't want anything on my windshield or dash.
-bZj
down8 said:
http://www.amazon.com/gp/product/B00343295O/
I'm thinking about this one. I don't want anything on my windshield or dash.
-bZj
Click to expand...
Click to collapse
I actually like that one... My phone doesn't get here until Tuesday (hopefully) but this looks like a great option
i like the samsung one actually, looks sturdy and secure, and the details say it comes with a suction cup windshield mount and a dash mount. I signed up to be notified of when the backorder clears up. Considering I cleared up my phone's gps issues today, i'm actually excited for this.
larryccf said:
here's the samsung OEM one, probably the most secure but i just don't like the amount of visual "real estate" it takes up - ie too likely to block view of the road http://www.samsung.com/us/consumer/...ype=acc_detail&subsubtype=car-kits&returnurl=
i ordered one of these, fairly cheap, and it is a 3 point grip, off ebay, but figured it would serve till i decided which one i wanted to go with
might just make out of fiberglass to mount low on top of the dashboard (ie no pedestal)
same seller on ebay has two others, one is very similiar to the samsungs in term of the pedestal and the other is vent mount
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190409500795&ssPageName=STRK:MEWNX:IT
Click to expand...
Click to collapse
I like that mount let us know how you like it.
speoples20 said:
I like that mount let us know how you like it.
Click to expand...
Click to collapse
actually have it here now (came in the other day) and i was more impressed with it than i expected to be - the mechanical functions of the suction lock handle &
the knob that tightens the ball socket at the back of the holder (that socket that lets you finitely adjust angle 3 dimensionally) is actually impressively solid
the plastic holder shell, once i got it on the bracket, is stronger than i imagined - for $11 shipped, i'm happy and may just stay with this one
I bought this one
http://cgi.ebay.com/UNIVERSAL-CAR-M...Accessories&hash=item1c1429513c#ht_2148wt_784
It's tiny, I love it
larryccf said:
here's the samsung OEM one, probably the most secure but i just don't like the amount of visual "real estate" it takes up - ie too likely to block view of the road ...
Click to expand...
Click to collapse
I'm thinking of buying that ebay one. Does it have a hole for the camera? Not that I will use it too much but it would be cool to have a dash cam
dublued said:
I'm thinking of buying that ebay one. Does it have a hole for the camera? Not that I will use it too much but it would be cool to have a dash cam
Click to expand...
Click to collapse
wouldn't take much to cut a hole in it, but that isn't a bad idea - i've actually had moments where i thought about getting one everytime some idiot nearly causes an accident by cutting in front of me, from 2 lanes over to make an exit ramp he shouldn't be trying to make, only to hit the brakes hard just as he's in front of me (the cabs in vegas have em)
I got one that mounts in the cup holder. In my truck the windshield is too far away but there is a cup holder in the perfect position. The main cup holder that I use is still open so I don't lose anything. Also, it rotates to landscape mode (either direction) with a click.
http://www.amazon.com/Bracketron-UC..._1?ie=UTF8&s=automotive&qid=1279480388&sr=8-1
yea i guess it wouldn't take too much effort to take a dremel to the mount and make a hole for the camera.
Some one a few posts up linked to a very small mount that would leave the top of the phone uncovered.
i don't know if you guys know about the brodit/proclip ones, but they have been the best mount i've found for just about any phone or device i've ever used.
its an intermodal system that has an attatchment custom made for your car model and a separate one for your specific device.
i have found those to be the absolute best, hands down. i live in socal and spend a good part of my life on the road so i have tried about every brand and these are the best.
http://www.proclipusa.com/
they only have one for the galaxy s right now, but i emailed my customer service rep and he emailed back right away telling me they are working on a custom one for the vibrant and that he would email me when they were done.
i am currently using my hd2 mount with the gelskin on which sorta works until they come up with one for this device.
diaa08 said:
i don't know if you guys know about the brodit/proclip ones, but they have been the best mount i've found for just about any phone or device i've ever used.
its an intermodal system that has an attatchment custom made for your car model and a separate one for your specific device.
i have found those to be the absolute best, hands down. i live in socal and spend a good part of my life on the road so i have tried about every brand and these are the best.
they only have one for the galaxy s right now, but i emailed my customer service rep and he emailed back right away telling me they are working on a custom one for the vibrant and that he would email me when they were done.
i am currently using my hd2 mount with the gelskin on which sorta works until they come up with one for this device.
Click to expand...
Click to collapse
looks really nice, but hella expensive once you add the car mount and the device holder. i thought samsung's was expensive, but unless there's some huge benefit to the proclip i'm going to probably get samsung's or a 3rd party generic mount like arkon's universal mount
well the advantage such as it is is that once you buy the car mount it works for all devices in the future and fits your specific car like a glove. especially useful if you have a unique car (i drive an element) where suction mounts or other things don't work. i know its expensive, but i've found it to be worth it. my devices never fall or hit anything or vibrate and are always exactly within arms reach. definitely an investment though.
I haven't received my phone yet but does anybody know if the Vibrant has a "Car Mode"
I know the original droid would sense the magnets in the oem car mount go into car mode automatically. The Droid X does also.
dublued said:
I haven't received my phone yet but does anybody know if the Vibrant has a "Car Mode"
I know the original droid would sense the magnets in the oem car mount go into car mode automatically. The Droid X does also.
Click to expand...
Click to collapse
sort of.
It's not like my old nexus one .
All it does is reads you your emails and texts
diaa08 said:
....they only have one for the galaxy s right now, but i emailed my customer service rep and he emailed back right away telling me they are working on a custom one for the vibrant and that he would email me when they were done....
Click to expand...
Click to collapse
I thought the dimensions and specs for the internation galaxy s and the vibrant were identical?
siberslug said:
sort of.
It's not like my old nexus one .
All it does is reads you your emails and texts
Click to expand...
Click to collapse
How do you put it into car mode?
jblade1000 said:
How do you put it into car mode?
Click to expand...
Click to collapse
I'm pretty sure you could install that one car app on the Vibrant. I forgot what it was exactly called. Anyways, go to Settings > Text to Speech > Driving Mode.
jblade1000 said:
I thought the dimensions and specs for the internation galaxy s and the vibrant were identical?
Click to expand...
Click to collapse
i think you might be right... i know they are usually very specific about testing and stuff, so if that's the case im sure they will update the listing to say its available for both. on the hd2 the dimensions were slightly off and they had a mount for the tmous hd2 out about three days after launch.
EDIT: looking at official specs, the vibrant is supposed to be 0.3mm wider, for what its worth
dunno about the car mode, but doesn't sound like its the same thing. the question would be: does the vibrant have a magnetic sensor? otherwise its just going to have to be some kind of app, which i do not believe is included, but might be available on market...
Anyone know of a good car dock for the Aria that sits on the dashboard for navigation.
demo_guy69 said:
Anyone know of a good car dock for the Aria that sits on the dashboard for navigation.
Click to expand...
Click to collapse
I am not affiliated to the suggested company but have bought from them on multiple occasions.
They should have what you are looking for. Very good build quality as well.
proclipusa.com
From ProClip: for HTC Aria and HTC HD Mini
proclipusa<DOT>com/brodit-device-holder/at&t-htc-aria/charging-holder-with-tilt-swivel-and-straight-power-cord-for-fixed-installation-513142-18221<DOT>aspx
Kind of expensive though.
helluvamatt said:
Kind of expensive though.
Click to expand...
Click to collapse
Yeah, that's pretty much Proclip's deal. They do make phenomenal products, but they charge phenomenal prices too.
One saving grace is that they sell the car mount portion separate from the device grip, so you can buy the car side once and just swap the device side out as you move from phone to phone.
I love the mount I have, but I'm not 100% sure as to whether I think it was worth the cost. If it was maybe 2/3rds to 3/4s the price, I don't think I'd have the same reservations, but at this price point, I'd do some serious looking at universal mounts before dropping the change on a ProClip rig.
I found a Car Mount on eBay for $7. eBay item #: 400148176134 (Enter the number in eBay search, I'm a new member so I can't post links). The eBay merchant (sak.gaming) is based in Hong Kong and it probably is going to take two weeks for the thing to get here (I live in Edmond, Oklahoma, US), but it seems like a good deal. It says the mount is for the HTC Aria/Liberty (We know the Liberty is HTC's code name for the Aria), yet the picture shows the HD Mini. It has been confirmed that the HTC HD Mini and Aria are basically the exact same phone, just one has WinMo and the other is Android. The plus side to the mount I found is that it could also be used as a desk mount, I will report back when I receive the mount. (Ordered on 8/28, could take two weeks)
Aria / HD Mini Accessories
The HTC Aria/Liberty/Intruder/A6366 is the exact same form factor as the HD Mini (and the hardware specs seem identical - only difference is the OS). Anyway, I found this distributer's site that has car mounts, desk docks, adapters, etc.
www<dot>netimes<dot>com/shop/htc-dopod-htc-hd-mini-c-80_754.html?page=1&sort=20a
Desk docks on the first page and car mounts on the second. I haven't ordered any nor have I ever ordered from the distributer, but their prices are pretty cheap (have not checked on shipping).
Now if only the Aria had audio outs through its usb port, but I don't think that is the case since HTC got so much negative feedback on their extUSB jack that was also used for a headphone out.
Let me know about the quality if anyone orders from here.
demo_guy69 said:
Anyone know of a good car dock for the Aria that sits on the dashboard for navigation.
Click to expand...
Click to collapse
I'm using an Arkon vent clip mount... $15 shipped from Amazon, and is a lot more solid than I imagined.
Let me know if you want pictures.
What is the model number of the Arkon you bought at Amazon?
The Arkon car mounts that I found are universal phone mounts. One product holds just about any device. The Arkon website lists most of their products for $20 and that is what I paid for one from Best Buy. I ended up returning it because the vent clips were cheap plastic and they broke off inside the vents. That one was not Arkon, but was very similar. Hopefully yours is more substantial.
helluvamatt said:
The Arkon car mounts that I found are universal phone mounts. One product holds just about any device. The Arkon website lists most of their products for $20 and that is what I paid for one from Best Buy. I ended up returning it because the vent clips were cheap plastic and they broke off inside the vents. That one was not Arkon, but was very similar. Hopefully yours is more substantial.
Click to expand...
Click to collapse
Mine seems to hold up fairly well.
SM429-SBH is the model of the one I purchased... but there are many on the market and I chose a vent mount as I drive an older compact car... (2000 Subaru Impreza)
I took pics for one member and will post them shortly, after dinner.
I guess a thank you is in order. A wee bit off topic, but Arkon is the only company I've found that makes a mount specific for the TomTom XL, called the easy port. I've had mine for at least a year and have broken the flimsy POS suction ring mount TomTom gives you. Arkon makes a pretty substantial looking EasyPort mount. Amazon has it for $9.99. I ordered it; if it is worth a darn, then it says something about the rest of their products. So thank you ioft for pointing my curiosity in the right direction, so that I stumble upon the solution to a problem I've had for a few months ($119 decent GPS unit I can't use).
helluvamatt said:
I guess a thank you is in order. A wee bit off topic, but Arkon is the only company I've found that makes a mount specific for the TomTom XL, called the easy port. I've had mine for at least a year and have broken the flimsy POS suction ring mount TomTom gives you. Arkon makes a pretty substantial looking EasyPort mount. Amazon has it for $9.99. I ordered it; if it is worth a darn, then it says something about the rest of their products. So thank you ioft for pointing my curiosity in the right direction, so that I stumble upon the solution to a problem I've had for a few months ($119 decent GPS unit I can't use).
Click to expand...
Click to collapse
NP! I hope it works out for you.
Pics! Excuse the messy car. The mount is adjustable in terms of phone fitment and swivel. The bottom "feet" can also be slid out of the way of the charge, microphone, and lanyard ports. The side "grips" and bottom "feet" also have cushions on them to prevent scratches and such. I've also included a video showing that the phone is secure in the mount, and the "creaky" sound you hear is my vent... car is old -- it's a 2000 lol.
Taken from my old N82.
Where is the magnet detect on the aria that senses the dock? If there is indeed such a thing.
Sent from my (liberated) HTC Liberty using XDA App
duckredbeard said:
Where is the magnet detect on the aria that senses the dock? If there is indeed such a thing.
Sent from my (liberated) HTC Liberty using XDA App
Click to expand...
Click to collapse
The one I own ("dock") isn't a true dock in the sense of connectivity & screen control. It just holds the phone. Navigation/Maps app keeps the screen on.
I ordered the arkon SM429-SBH, directly from manufacturer for $21.95, never received. I attempted contact several times, and will likely have to file a payment dispute.
I did however purchase the same unit from Amazon, $14.88 when I combined other items (from filleritem.com), to get to 25$ for free shipping. The dock seems somewhat wobbly at first, but when you finally get it situated, gravity and the click grip thing work very nicely together. I have an audio input cable for my head unit that I wired up around the top to plug into it, and my power cable wraps around the audio cable (curly cord), so that it hangs nicely below where the phone sits. I may post pictures if anyone is interested.
Please do not try to order this product directly from Arkon.
I decided that I'd go ahead and get a tablet so I went with this device. I primarily got this so my daughter could watch movies on car trips and my wife can dub around the net at home. Most all the mounting discussion seems to be front-seat mounts but I'm looking to mount for the back seat, prefereable on a driver's side headrest. I was looking at the Grip Daddy (http://gripdaddymounts.com/) mounts, and debating between the two they offer but I havne't been able to find too much about them.
I was wondering if anyone had any feedback or experience with them, or alternatives they'd prefer? I'm looking for rear-headrest mounting and would prefer the ability to position it near the middlle, but directly behind the driver's headrest is also fine. ('08 Dodge Caravan)
Thanks for any suggestions, or even tips in general about mounting this thing.
Wouldn't something like this work as well for a fraction?
http://www.ebay.com/itm/320731033899?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Thanks for the response, I didn't articulate that clearly enough, but that's the reason I'm asking. I see a lot of mounts that are around that price, but I didn't know if there was something about the Grip Daddy and it's $60 price tag that actually made it worth it, or if the inexpensive non OEM ebay/amazon items are as good as OEM. (That's what I usually buy for my cell phones)
I haven't seen any discussion about headrest mounts at all so I was just kind of throwing it out there in case there was someone else who had experience with this type of mount. I'll just end up getting the cheap one and posting something about it.
The Grip Daddy defenitivly looks more robust, but is it worth it?
I don't know if the eBay / Chineese stuff is sturdy or loose, but usually it's "decent enough". And for the price, well, even if it's a worthless peace of junk, it's 10$ so you will still be able to put food on the table!
I will most likely buy one in the next month or so, I'll let you know if you didn't got one by then!
NOTE: The Grip Daddy is installed on the "upper" part of the headrest, that might be a problem if it's used by kids (mostly)
Well, my daughter is young so she wont be interacting with it unsupervised. We're basically only going to use it as a television for longer car trips so with her strapped in her car seat, this will be just the right distance away.
I went ahead and ordered this one. I didn't want to buy from overseas, as well as wait for the overseas shipping.
http://www.ebay.com/itm/360394774751
I'll post back, with some pix about how it goes.
Spovik said:
http://www.ebay.com/itm/360394774751
Click to expand...
Click to collapse
So I got this in today and I set it up. I can't say I'm too impressed. It's probably fine, unless you hit a bump. It's flimsy and cheap. I initially mounted it with the support holding the tablet upward, but that was way too flimsy. I opted to mount it going down rather than up and I figure if I can put some sort of support behind it to make it secure, but overall it will get the job done.
If you're looking for a headrest mount and plan on using it relatively regularly, I'd spend a little extra for a more rugged mount.
I'm in my third cheap headrest mount. They all broke on the same spot, the pivot joint, different brands bought on amazon and eBay...enough. the grip daddy seems interesting and cheaper than the pad holder...can't decide yet.
Oh yeah, what broke them was my 7 year old daughter
Leaving the car with the backpack, other times, the 2nd row seat laying on it for passengers coming in and out of the 3rd row.
Sent from my Transformer Prime TF201 using xda premium
I totally agree with you.
Mine has not broken in over a year of operation, but it makes noise. it is always creaking if it is holding a tablet. I am looking from something more robust as well and had not seen that one that you found. There was another brand out there that looked promising for a $30 price range, but I cannot think of the name right now. (Arkon? http://www.arkon.com/tablet-accessories/universal-tablet-headrest-mount.html).
Anywho, If anyone tries out the Gripdaddy, I would love to know how it works. That creaking is driving me insane!!!
I ended up buying the proclip mount. No ball joints, it's aespherical joint hold together by a screw. Can't easily break this. Expensive, but versatile, since i already have a coupke of device holders.
Proclipusa.com
do you already have it, or are you waiting for it?
I noticed that they did not list the GT 10.1 in the drop down box...
crashmw said:
do you already have it, or are you waiting for it?
I noticed that they did not list the GT 10.1 in the drop down box...
Click to expand...
Click to collapse
I'm waiting for it. After i got just the headrest support bits, I ordered the 10.1 holders from the main page, they're suppose to be compatible with any device holder they sell.
Sent from my GT-P6800 using xda premium
Okay, got it, installed one, going to install the other later today.
BEST HEADREST MOUNT EVER. Solid as a rock, at least as solid as your seat/headrest poles. It can stay as close to the back of the seat/headrest as you want, so if any removable case [edit: holder] could be slick, this is it. The other ones I bought on ebay/Amazon (4 in total, all broken by kids/3rd row seat reclining) were big, and they would leave the tablet in the way (say when the kids need to go through one door only). Not this one.
As a bonus, since I bought the slide mounts (male/female) so that the tablet mount is removable, it can leave virtually no trace there's a mount there, quick and easy in/out.
Very expensive for what it is, but you're not paying for the material, but for the engineering. At least that's what I told myself after forking close to $250.00 for it...grr.
Thanks for the follow up,but $250 is not worth it to me. We don't spend enough time in the car at this point to justify me spending that much money on a mount.
If you're happy with it, that's what counts.
anyone else find any lower priced successful options?
Go with Gripdaddy
Although Gripdaddy is a bit more pricey ($60 instead of $10), yes, there is a reason. Unlike the other cheaper models, Gripdaddy does not just break. I've had mine for several months, and it has yet to fail me. It's not made out of cheap plastic - it LASTS! I don't see the shaking either. Instead of spending tons of money replacing the cheap, plastic headrest mounts - I suggest buying the Gripdaddy once and not worrying about future problems.
Hi there! I am looking for suggestions from the XDA forums for a car mount for the OnePlus One! You guys are pretty knowledgeable so I trust this being left in your hands
Even Universal mounts can be suggested, as there will be other family members using other phones(Samsung Galaxy S6 Edge or friends using iPhones).
I Umair I said:
Hi there! I am looking for suggestions from the XDA forums for a car mount for the OnePlus One! You guys are pretty knowledgeable so I trust this being left in your hands
Even Universal mounts can be suggested, as there will be other family members using other phones(Samsung Galaxy S6 Edge or friends using iPhones).
Click to expand...
Click to collapse
http://www.amazon.com/Koomus-CD-Eco...Samsung/dp/B00JP0RTB4/ref=zg_bs_2407778011_19
I have the Koomus as well. It's major flaw is the part that pushes against the top of the CD slot may become loose as you remove the phone.
You can buy clones that attach to your vent or with VHB adhesive for as little as $4 from DX, aliexpress, etc.
http://www.brodit.com/productList.html?brand=OnePlus&model=One&pn=prod
you will need a car-specific hilder as well. its a little pricey but totally worth it (for me).
i have one of those for my Nexus 7 Tablet since some years, just works all fine
also used a specific holder for the Galaxy Nexus when I still owned the device.
cheers!
if you have a case, or if you are OK with removing your back cover and throwing a metal plate back there (this is what I did), this one works great!
http://www.amazon.com/gp/product/B00HUIL310?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
you just have to tape down the metal plate. I placed mine back there and about a day later I started losing signal...the plate had fallen towards the bottom of the phone and must have been blocking some antennas or something. moved it up, taped it in place, and its been solid and working great since. I use this every day to and from work and anywhere else I go without it ever budging. its so nice not having to clip the phone in.
Search Xiaopimei on Amazon ! Amazing and very cheap !
Xiaopimei is great, I agree
I've been using the Brodit/Proclip (same thing) for about a year now, great stuff. I can highly recommend it
I've ordered
http://www.banggood.com/REMAX-RM-03-Mobile-Navigator-Car-Outlet-Bracket-p-982977.html
I heard its great, and its pretty cheap, and universal size phone can hook to it.
Here is video description
https://youtu.be/qMYhr9YN9Ok?t=22s
Brodit for OnePlus One
Remember to buy a Proclip for your specific car to mount on
My experience, over the last 7 years. I swear to always buy Herbert Richter (HR) mounts. (ebay or online German/UK stores)
Extremely durable plastic (don't want your phone to fall). Universal, also use the same mount on my bicycle, in other cars. Mine has now been in use for 5 years now (have 2). I use the universal one and I use the vent holder in the car. Doesn't block the view and in summer gets cooled down because the airco blows cold air on it. Also doesn't damage the phone and really holds it well.
Also very good experience with their customer support.