[Q] RCMixHD v3.4 keyboard not appearing - Desire Q&A, Help & Troubleshooting

I just flashed the new RCMixHD v3.4 rom after a full wipe. After I rebooted the device it took me to the usual setup, but when I tried to choose a WiFi to connect to, the keyboard didn't came up. It surprised me a bit, but I chose skip anyway. After I skipped the entire setup, I went to try if the keyboard really doesn't work, and it doesn't. I did a full wipe and flashed the rom again, but got the same result. Does anyone have the same problem with this rom, and if yes, did you came up with any solution?
Thanks in advance!

Same problem there, any solution? THX

datagrid.xda said:
Same problem there, any solution? THX
Click to expand...
Click to collapse
Somehow solved the problem. Just downloaded the rom again and reinstalled the radio.
Hope this helps!!

Related

Won't wake up after app install?! HELP!

Hi,
I just got some new applications and installed them, the last one was InterKey(Paragon software). After finishing the install it requested restart and restarted after clicking OK. Now it just won't wake up to windows and get's stuck on "smart mobility" after the "by bepe" and HTC logo...
It should install on the SD card, but I also tryed removing it, but it is just the same.
What to do, I don't wana flash it again, because of all the data, so please advice, if there is another way...
I'm using bepe rom (latest I think), about the radio I am not sure...
Regards,
Peter
Hard reset
Odisej said:
Hi,
I just got some new applications and installed them, the last one was InterKey(Paragon software). After finishing the install it requested restart and restarted after clicking OK. Now it just won't wake up to windows and get's stuck on "smart mobility" after the "by bepe" and HTC logo...
It should install on the SD card, but I also tryed removing it, but it is just the same.
What to do, I don't wana flash it again, because of all the data, so please advice, if there is another way...
I'm using bepe rom (latest I think), about the radio I am not sure...
Regards,
Peter
Click to expand...
Click to collapse
Try a hard reset....
well... since I need the phone feature, I'll do that... it's the same like flshing, right? Everything's lost after hard-reset...
btw, does anyone know, how to set a different alarm ringtone?
Regards,
Peter
I am experiencing a similiar problem on the Trinity. If I install a new fresh ROM (Ive tried several, currently running Marys) and then install a few normal applications (tomtom, Googlemaps, Messenger and so on) after a few days it wont start up after switching it off.
A hard reset solves the problem, but Im starting to get a bit tired of doing a hard reset every other week.
I tried to roll back to the factory default firmware (witn no GPS activated) and then installed MunRus's newest..however the problem came back after a few days use.
What ROM
Odisej said:
well... since I need the phone feature, I'll do that... it's the same like flshing, right? Everything's lost after hard-reset...
btw, does anyone know, how to set a different alarm ringtone?
Regards,
Peter
Click to expand...
Click to collapse
Whos ROM are you using?
Try Karmba
tommylad said:
I am experiencing a similiar problem on the Trinity. If I install a new fresh ROM (Ive tried several, currently running Marys) and then install a few normal applications (tomtom, Googlemaps, Messenger and so on) after a few days it wont start up after switching it off.
A hard reset solves the problem, but Im starting to get a bit tired of doing a hard reset every other week.
I tried to roll back to the factory default firmware (witn no GPS activated) and then installed MunRus's newest..however the problem came back after a few days use.
Click to expand...
Click to collapse
Try the Karmba_a 3.0 ROM very good
I'm using bepe's rom 3.00.751.10 and radio 1.38.00.11
Regards,
Peter

[Q] LeeDroid HD V3.0.3 GB crash after install

Having trouble with the latest LeeDroid HD ROM have flashed many LeeDroid roms before without issue but for some reason aftering clearing all caches and running the latest rom it will install ok but on reboot it just hangs on the White HTC screen and won't boot in.
Any Ideas what could be causing it?
Currently Running LeeDroid HD v3.0.1, LeeDroid Kernel v3.1.1 radio 12.54.60.25_26.09.04.11_M2
Make sure you're deleting all data do a full factory reset (deletes all data does not actually restore to factory condition) then clear the dalvik cache, re apply the ROM make sure its CLEAN and you haven't modified it, don't apply any themes or anything, then let it boot and be patient.
Try downloading it again also it could be a corrupt download.
m3t4lh34d said:
Having trouble with the latest LeeDroid HD ROM have flashed many LeeDroid roms before without issue but for some reason aftering clearing all caches and running the latest rom it will install ok but on reboot it just hangs on the White HTC screen and won't boot in.
Any Ideas what could be causing it?
Currently Running LeeDroid HD v3.0.1, LeeDroid Kernel v3.1.1 radio 12.54.60.25_26.09.04.11_M2
Click to expand...
Click to collapse
I had similar issue few days back. But i had the Leedroid rom (same rom,kernel as urs) already runing flawlessly for a few days. It decided just to hangs at the same HTC Screen... tried to clear caches(all), hard reset, reflash same rom... still stuck same place. I finally had to flash stock 1.32 image, root all over again, etc. ... and flash Leedroid (same) again... works fine now
I got the feeling that I made my friends with their stock DHD and Iphone users drooling and jealous of my phone(csutomised with sense 3.0 stuffs), and they collectively jinxed my phone, and had this crash! lolz
btw. i flashed SAME rom i had on my sdcard, so I think the rom fine(mine at least). just something triggered that crash!
all the best...
Yea i tried reflashing from stock rom the other day loaded up one of the RUU exe's and rerooted etc and tried to reflash with no luck so i'm all out of ideas
raidenxl said:
Make sure you're deleting all data do a full factory reset (deletes all data does not actually restore to factory condition) then clear the dalvik cache, re apply the ROM make sure its CLEAN and you haven't modified it, don't apply any themes or anything, then let it boot and be patient.
Try downloading it again also it could be a corrupt download.
Click to expand...
Click to collapse
Have also done factory reset and cleared dalvik cache etc. no joy
Just managed to find a copy of LeeDroid HD V3.0.2 have installed and found it also crashes but.... it gets to the LeeDroid Android screen, little further but unfortunately still crashes
Managed to get 3.0.3 working on my DHD turns out it was just down the cwm version i had, updated to 3.0.2.5 and boom worked first time =D only problem i have had with both 3.0.1 and 3.0.3 is the camera keeps dropping out, app doesn't force close but the screen keeps going black and all buttons dissapear then all comes back... =( Atleast i'm up to date though
Any Idea's on the Cam issue?
have run logcat and noticed the following in the log
W/mm-camera( 1400): config_proc_CAMERA_STOP_SNAPSHOT: state is not correct ctrl->state = 25 W/mm-camera( 1400): VFE_RESET_ACK illegal ctrl->state 24
dunno if that makes any sense to anyone
tinkered with it a little last night didn't seem to make a difference so left it over night and for some odd reason works fine this morning i think the issue was down the camera app itself but it looks to be working fine now thankfully
UPDATE:
Ok looks like the issue is still there found out what is causing it thought, the camera works fine but...only when wifi is off, if you turn wifi back on you get the same issue as before,
Please anyone got an idea on wtf?
UPDATE2: have worked out it must be the camera app due to the fact i download a different app which appeared to work fine. Not sure why there's a glitch though

MIUI problem

I have a problem with MIUI rom. Some days ago, my phone suddenly had FC, now, my phone run really slow and laggy... If I turn off the screen, my phone won't wake up, only four button in the bottom light up.
I wiped everything in CMW (system,data, and cache, also sd-card) but it doesn't work.
The fresh install had the same issues
I have this problem only with MIUI rom
any help
You probably need to provide more info on the issue. What version of MIUI are you running? Have you tried a fresh download of the ROM?
zandroid said:
You probably need to provide more info on the issue. What version of MIUI are you running? Have you tried a fresh download of the ROM?
Click to expand...
Click to collapse
i have tried from 1.8.5 to 1.9.2.
it's very weird
this guy has the same problem with me, maybe he can explain better than me
http://forums.miui.us/showthread.php?3740-Display-won-t-wake-from-sleep
Hey guys, I flashed 1.819 yesterday and everything was going great. The ROM ran smoothly and I was having no issues at all. When I woke up the next morning my display would not turn back on. Every time I tried to turn on the display the soft lights would light up but the display remained unresponsive. The phone still seemed functional as I could hear e-mail and sms notifications coming through.
When I rebooted my phone it was abnormally slow.. mounting the sd card and syncing seemed like it was taking forever and the launcher was very jittery.. if I let my display time out it would not come back on and I'd be forced to pull the battery and try again.
I performed a full wipe through clockwork recovery (everything, including wiping system,data, and cache in 'mounts and usb') and reinstalled 1.819. The fresh install had the same issues.. if I let my display time out I wouldn't be able to turn it back on. I thought I was having some wonky hardware issue but after flashing my previous sense rom and everything is working perfectly.. so I'm pretty much scratching my head here. My phone was kickass for one day and became allergic to MIUI overnight!
Click to expand...
Click to collapse
Have you tried using a different kernal such as Tiamat or JD's Kernal?
May want to try that. I had good luck with Miui and Tiamat (ran it for a week)
PacerguyDon said:
Have you tried using a different kernal such as Tiamat or JD's Kernal?
May want to try that. I had good luck with Miui and Tiamat (ran it for a week)
Click to expand...
Click to collapse
i have tried both
Does this happen immediately after you flash? Or are you installing applications to get back to your preferred setup and then seeing the performance problems?
If it's the latter, I'd run the rom alone and see if it runs normally. Then install your applications individually until you encounter issues.
ttupa said:
Does this happen immediately after you flash? Or are you installing applications to get back to your preferred setup and then seeing the performance problems?
If it's the latter, I'd run the rom alone and see if it runs normally. Then install your applications individually until you encounter issues.
Click to expand...
Click to collapse
immediately after the flash. I don't install any other apps
since we are talking about MIUI issues. I am running the latest version of MIUI with the JDKernal.
The camera has color distortion lines when I take a picture. The picture comes out fine but when taking it the image shows the distortion. It did not do that before so I can only assume its something with the camera in the ROM.
Anyone else see this?
spiderj said:
since we are talking about MIUI issues. I am running the latest version of MIUI with the JDKernal.
The camera has color distortion lines when I take a picture. The picture comes out fine but when taking it the image shows the distortion. It did not do that before so I can only assume its something with the camera in the ROM.
Anyone else see this?
Click to expand...
Click to collapse
Try different kernel
Sent from my Incredible 2 3D using XDA App
tenchu_712 said:
immediately after the flash. I don't install any other apps
Click to expand...
Click to collapse
tenchu, your signature says you are not English or American. Are you running the MIUI.us ROM on your incredible 2 in English - and not another language?
.....just a thought.

[Q] Help: Gps not working as it should.

Hey guys,
My gps isn't working accurate.
First off it worked pretty good but when I changed to a custom rom (android revolution Hd) it didn't anymore.
When i use google maps, it takes a damn long time to get a fix on my position and when it does it stays accurate for about 5 seconds and then it starts to change to a street next to me then to another side... etc. . Also when i am standing still it jumps for my location to 50meters ahead of me and behind me, changing my speed to 20km/h ... I think you get the problem. Also the same problem on navigon (navigation software) it is constanly rerouting me because of the inaccurate position. So its not an application issue.
I flashed the rom as it should be, with boot.img through fastboot and zip file in cwm. Except for the gps there are no other issues.
Then i flashed the original rom in cwm with boot.img in fastboot, still the same problem.
I then tried CM10 and it became even worse... every 20 seconds it gave me a position update in maps and with navigon there wasn't even a update because it couldn't get a fix.
And i also used fasterfix on every rom except the original one (not rooted) to set my gps to europe.pool.ntp.org or something like that...
Now i am trying to revert to android revolution HD but first my battery has to be charged above 10% and it goes damn slow because of the bricked boot (made a mistake while changing form CM10 to And rev HD) Can't flash the and rev HD yet but does somebody in the meantime know a solution ?
Somebody ??
Could it be a problem with the kernel ? because i didn't flash one separatly
Does somebody has a solution ?
Unfortunately, I also have the same problem with rom coredroid and igo primo aid to some expert please
thanks
I had the same issue when I moved from Stock to the Modaco Ir5 Vanilla ROM, my GPS didn't even go as far as finding my location inaccurately, it didn't work at all. Hence I couldn't use my maps/navigation.
I am now running the Slim Bean ROM and everything is working great. I am no expert, but have you always done the usual 'full wipe data > clear cache partition > clear Dalvik cache' while flashing new ROMs?
For your charging issue, maybe try this? http://forum.xda-developers.com/showthread.php?t=1646135
My phone is now allright but you i'll try the rom you are speaking about and see if the gps works better.
and... Also tried another kernel (eternity) but it still didn't work
I had this issue and had it fixed after sending my phone to service 3 times.
The first time they only did a reset, didn't help.
Second time they changed the wifi, GPS module, didn't help.
I sent them a recording of the problem on the third time. This time they changed the motherboard and it finally got fixed.
Remember to tell them that the issue is specially visible when GPS and WiFi are both on.
Sent from my HTC One X using xda app-developers app
waterscent said:
I had this issue and had it fixed after sending my phone to service 3 times.
The first time they only did a reset, didn't help.
Second time they changed the wifi, GPS module, didn't help.
I sent them a recording of the problem on the third time. This time they changed the motherboard and it finally got fixed.
Remember to tell them that the issue is specially visible when GPS and WiFi are both on.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
There isn't any diffrence when wifi is enabled and like i said, with stock rom everything was fine.
Just for now i can't flash another rom but other solutions are welcome...
kefjeuh93 said:
Just for now i can't flash another rom but other solutions are welcome...
Click to expand...
Click to collapse
Tried the agps patch (http://forum.xda-developers.com/showthread.php?t=1595800) still no solution
Tried some other roms and still nothing...
I will try to go back to stock with RUU but which one do i need to choose ? Based on what info ?
i know i have to choose HTC_E11 (dutch)
kefjeuh93 said:
Tried some other roms and still nothing...
I will try to go back to stock with RUU but which one do i need to choose ? Based on what info ?
i know i have to choose HTC_E11 (dutch)
Click to expand...
Click to collapse
This may help - GPS Fix.
It worked for me, but not for the faint hearted.

AOSP Keyboard Problem

Hello!
Basically I was trying to install gapps properly last night, and after it messed up I made some changes. I have a feeling I may have one of the "LatinIME" files from data/local - so now everytime I boot up (even after a data wipe, then reinstall of Cyanogen), the keyboard constantly stops responding - won't open at all.
Any ideas on how to fix this would be greatly appreciated!
Thanks
I had the same symptom
I had the same symptom on my G2X today. I flashed CM10 (ParanoidAndroid) onto it over and over and the keyboard just never worked. In fact, the reason that I reflashed was because the AOSP keyboard stopped responding even though I use Swype.
The culprit, for me at least, was that goo.im had upgraded me to the newest GAPPS dated 11/22/2012. When I finally reflashed CM10 and the GAPPS for JB dated 7/26 (gapps-jb-20120726-signed), everything worked fine again.
Good luck,
Zane Westover
DomCowell said:
Hello!
Basically I was trying to install gapps properly last night, and after it messed up I made some changes. I have a feeling I may have one of the "LatinIME" files from data/local - so now everytime I boot up (even after a data wipe, then reinstall of Cyanogen), the keyboard constantly stops responding - won't open at all.
Any ideas on how to fix this would be greatly appreciated!
Thanks
Click to expand...
Click to collapse
DomCowell said:
Hello!
Basically I was trying to install gapps properly last night, and after it messed up I made some changes. I have a feeling I may have one of the "LatinIME" files from data/local - so now everytime I boot up (even after a data wipe, then reinstall of Cyanogen), the keyboard constantly stops responding - won't open at all.
Any ideas on how to fix this would be greatly appreciated!
Thanks
Click to expand...
Click to collapse
Even i did the reinstalls of CM10 and ICS Gapps still had the problem. then i downloaded the honso keyboard which is for JB and still had the problem. But in the end i disabled the spell checker in inputs, till now no issues... this might help u...
Mine in cm10 fxp 209.

Categories

Resources