Won't wake up after app install?! HELP! - P3600 ROM Development

Hi,
I just got some new applications and installed them, the last one was InterKey(Paragon software). After finishing the install it requested restart and restarted after clicking OK. Now it just won't wake up to windows and get's stuck on "smart mobility" after the "by bepe" and HTC logo...
It should install on the SD card, but I also tryed removing it, but it is just the same.
What to do, I don't wana flash it again, because of all the data, so please advice, if there is another way...
I'm using bepe rom (latest I think), about the radio I am not sure...
Regards,
Peter

Hard reset
Odisej said:
Hi,
I just got some new applications and installed them, the last one was InterKey(Paragon software). After finishing the install it requested restart and restarted after clicking OK. Now it just won't wake up to windows and get's stuck on "smart mobility" after the "by bepe" and HTC logo...
It should install on the SD card, but I also tryed removing it, but it is just the same.
What to do, I don't wana flash it again, because of all the data, so please advice, if there is another way...
I'm using bepe rom (latest I think), about the radio I am not sure...
Regards,
Peter
Click to expand...
Click to collapse
Try a hard reset....

well... since I need the phone feature, I'll do that... it's the same like flshing, right? Everything's lost after hard-reset...
btw, does anyone know, how to set a different alarm ringtone?
Regards,
Peter

I am experiencing a similiar problem on the Trinity. If I install a new fresh ROM (Ive tried several, currently running Marys) and then install a few normal applications (tomtom, Googlemaps, Messenger and so on) after a few days it wont start up after switching it off.
A hard reset solves the problem, but Im starting to get a bit tired of doing a hard reset every other week.
I tried to roll back to the factory default firmware (witn no GPS activated) and then installed MunRus's newest..however the problem came back after a few days use.

What ROM
Odisej said:
well... since I need the phone feature, I'll do that... it's the same like flshing, right? Everything's lost after hard-reset...
btw, does anyone know, how to set a different alarm ringtone?
Regards,
Peter
Click to expand...
Click to collapse
Whos ROM are you using?

Try Karmba
tommylad said:
I am experiencing a similiar problem on the Trinity. If I install a new fresh ROM (Ive tried several, currently running Marys) and then install a few normal applications (tomtom, Googlemaps, Messenger and so on) after a few days it wont start up after switching it off.
A hard reset solves the problem, but Im starting to get a bit tired of doing a hard reset every other week.
I tried to roll back to the factory default firmware (witn no GPS activated) and then installed MunRus's newest..however the problem came back after a few days use.
Click to expand...
Click to collapse
Try the Karmba_a 3.0 ROM very good

I'm using bepe's rom 3.00.751.10 and radio 1.38.00.11
Regards,
Peter

Related

Please help, NO WIFI ON UNIVERSAL :(

Worked ok last night, then it crashed (mad colours on screen), so I had to do a FULL restore of radio and rom (seemed to be stuck in bootloader).
So, reinstalled everything, all good, I just cannot get it to turn on WIFI. I go into comm manager, click on wifi, and it tries to turn it on, then comes back with a X next to the icon.
Also the front today screen plugin (the wifi/bluetooth one) doesnt say WIFI: off anymore. Just has Bluetooth:Off
Any ideas
THANKS!
Try to flash back the rom again..
By the way, what rom do u used?..
I only just flashed it again ..
I used the O2 rom 'Xda_Exec_Upgrade_v1.30.162'
Can you recommend another ROM that might fix it?
Also, does reinstalling a ROM reinstall all the drivers? As I've noticed some things stay resident even after a flash; call timers for one..
thanks
while im waiting for replies, im going through roms
trying different AKU ones now from the ftp
could it be a radio issue?
My QTEQ 9000 are on the same situation, made some stripes on the screen and now can´t detect anything!!
The wifi apears I start it but can´t get any signals!!
Any help please?????
i upgraded radio to 1.14 and still same
Try these ROMs
You can find on the forum, Ivan's and Helmi's ROMs.
They are the latest AKU 3.2 and seems to work just fine as O2 ROMs are just AKU 2.X!
I think the problem lies deeper than a hard reset/rom as well, it must do after installing 3-4 roms, and a couple of radios.
Yes ive tried UNI_AKU3_5_WWE_IVAN_Test2 ROM as well.
Same.
Anyone else got any solutions as to what it might be?
installing the latest qtek rom off buzzdev now, includes full radio/rom/ext rom. if this doesnt work, then f**k it, ive spent enough hours on it, and i'll just get a new one on contract tomorrow.
thanks for the people that replied
what about the driver disk, isnt there a wifi thing on there
maybe im dreaming
Have a look in the network adapters list and see if the Tiacxwln card is listed, if not sounds like it is a hardware rather than a driver problem. It's not unheard of for computer hardware to fail for apparently no reason. This is likely if you have tried different ROMs and none of them work.
I´ve tried upgrade radio to 1.14 and I tried Ivan's and Helmi's ROMs.
and the problem persists!!!
Tiacxwln card is listed.
Strange situation because during one year worked very well and suddenly make some stripes on the screen and now don´t detect nothing!!
Maybe antenna problem??
Help us??
Is there a problem with o2 official rom?.. Heard few people also got a problem if flashing to o2 rom..
Nope, not working, tried qtek roms, a new orange rom, still wifi not coming on.
Yes the card does show in network cards.
Oh well
Any help Please???????????????????????????????

B&B V4.0 crashes while booting

I tried to disable BatteryStatus(from today), and after some SR its still GOOD!!!
PROBLEM SOLVED
"Hello,
I have a lot of hours behind me, because of working on my problem.
I did not found any solution, but i would like to share my experiences...
Symptom:
After some soft reset the pda can't boot. B&B v4.0 os loader image could be seen...
I tried install my programs in a lot of variation, but after some soft reset, the system fails while booting...
I dont know what is the cause of the problem.
Tried flash with art_htcwwe_11240501_026790_wwe_ship, after uspl, flash with 4.0. Same.
Tried to take the device into boot loader, change the splash screen, it hepled once. After the next SR same problem.
I have HTC Artemis (from HTC, not from any distributor)
Some ppl have written for me, they are fighting with our problem, please write here...
thx"
I don't know if it can help, but I flashed B&B 4.0 after B&B 3.7 and I still don't have those problems. I've done about 5-10 soft resets. Sometimes it seems that it takes longer to boot, but never locked.
Bye
Samribi said:
I don't know if it can help, but I flashed B&B 4.0 after B&B 3.7 and I still don't have those problems. I've done about 5-10 soft resets. Sometimes it seems that it takes longer to boot, but never locked.
Bye
Click to expand...
Click to collapse
yes, i used bb 3.7 before too...
Hi
Did you overclock your device by any chance? I overclocked to 247 using batterystatus in the B&B4 rom and i ticked add boost. Then when i opened up file explorer, it crashed, then started to load - then kept crashing while it was booting up, kepy going around in circles, load, boot up, crash, boot up, crash.
Hard rest solved the problem, i now overclock without the new "boost" feature. Maybe this helps?
dzign-it said:
Hi
Did you overclock your device by any chance? I overclocked to 247 using batterystatus in the B&B4 rom and i ticked add boost. Then when i opened up file explorer, it crashed, then started to load - then kept crashing while it was booting up, kepy going around in circles, load, boot up, crash, boot up, crash.
Hard rest solved the problem, i now overclock without the new "boost" feature. Maybe this helps?
Click to expand...
Click to collapse
I tried without any change of BatteryStatus settings...
xmas said:
I tried without any change of BatteryStatus settings...
Click to expand...
Click to collapse
Did you try to download again (or from any of the mirrors) the original ROM file, and reflash? Isn't it possible it damaged during the download process and it makes this fault in your device?
Some people said that who can't install B&B 3.7, it solved out their problem.
Bár lehet magyarul egyszerűbben kommunikálnánk?
zsitvayb said:
Did you try to download again (or from any of the mirrors) the original ROM file, and reflash? Isn't it possible it damaged during the download process and it makes this fault in your device?
Some people said that who can't install B&B 3.7, it solved out their problem.
Bár lehet magyarul egyszerűbben kommunikálnánk?
Click to expand...
Click to collapse
Downloaded again. The size of the file from an other mirror is the same.
off
Jah, lehet ezt nem töröm annyira , Bájtra pontosan ugyanakkora, de az önkitömörítős exe amúgy sem indulna, ha hibás lenne a mérete.
on
similar problem
Samribi said:
I don't know if it can help, but I flashed B&B 4.0 after B&B 3.7 and I still don't have those problems. I've done about 5-10 soft resets. Sometimes it seems that it takes longer to boot, but never locked.
Bye
Click to expand...
Click to collapse
i do have similar problem. I've installed B&B4 and it works fine until you sync it with exchange server, though sync goes ok, the device sticks during the first reboot after the sync and there is nothing i can do about it but HR
please help
maxi_boy said:
i do have similar problem. I've installed B&B4 and it works fine until you sync it with exchange server, though sync goes ok, the device sticks during the first reboot after the sync and there is nothing i can do about it but HR
please help
Click to expand...
Click to collapse
sorry, it actually sticks when first rebooting regardless of any sync ((
so the problem is identical
I have the same problem.
First time was after plugging in my SD card to install tom tom.
2nd time was after uninstalling the 3.7 boot dialer.
A reflash fixes this but obviously it would be better if there was a proper fix which did not brick my phone each time I add an app!
the issue might be with time/date settings
maxi_boy said:
sorry, it actually sticks when first rebooting regardless of any sync ((
so the problem is identical
Click to expand...
Click to collapse
i've just tried not to change time/date settings and everything works fine...
Yesterday, it happens to me too.
But with a hard-reset I've solved the problem.
I think I've got the cpu scaler with the turbo boost on.
Same here...
Hard reset brings the phone back to life. But when doing a install of an app and doing a Soft Reset he dies again...
Makes the ROM as good as useless for me.
I'll try a reflash and see what happens.
Today another time.
I've ran sprite backup and when the artemis reboots to make the backup the tomtom installer has beguin to reinstall itself. The backup has been interrupted and has made a soft-reseft. Them I sohuold to hard reset.
today I hanvent the boost option, only cpuscaler was on.
This is mostly due to the kaiser home plugin - it does not like to be hurried on boot. So no overclocking on boot - so untick remember last cpuspeed and overclock after reboot and do not use traylaunch part of bs - also causes lockup. Works on my rom.
But I've reporduced the problem without overclocking...
I think it's not an overclock problem.
Mmmm,
I think I fixed it!
I re-flashed my device and this time I did not modify the boot screen (World with sunrise HTC). So O2 is displayed but that's ok as I do not have any problems anymore!
Tengo, TomTom, SKTools, SPB Diary, MoDaCo Nodata and WM5torage installed and still a Soft Reset is no problem!
I'm a happy man!
ps. I also use an Exchange server (via gprs) for my mail.
ZeroIQ said:
Mmmm,
I think I fixed it!
I re-flashed my device and this time I did not modify the boot screen (World with sunrise HTC). So O2 is displayed but that's ok as I do not have any problems anymore!
Tengo, TomTom, SKTools, SPB Diary, MoDaCo Nodata and WM5torage installed and still a Soft Reset is no problem!
I'm a happy man!
ps. I also use an Exchange server (via gprs) for my mail.
Click to expand...
Click to collapse
I have also over clock, pc synch and exchange synch. I also had to re-flash. however, seems that it works very well if I flash HTC boot image after B&B4 before any other apps. now,I have BB4, HTC boot screen and all apps I like, and ... have SRed many times
ZeroIQ said:
Mmmm,
I think I fixed it!
I re-flashed my device and this time I did not modify the boot screen (World with sunrise HTC). So O2 is displayed but that's ok as I do not have any problems anymore!
Tengo, TomTom, SKTools, SPB Diary, MoDaCo Nodata and WM5torage installed and still a Soft Reset is no problem!
I'm a happy man!
ps. I also use an Exchange server (via gprs) for my mail.
Click to expand...
Click to collapse
,
The splash screen couldnt be the reason for crashing.
(i think there is a chance to brick again after some soft reset)
Same thing happen to me
Same thing happen to me, after instal everything on my device, after couple of softresets (becouse of installs) i though that eyerything is ok. But when i was trying to change biotouch setting, and then soft reset the device it didn't boot enymore. That's one bug in tom's rom that i have found, only one, but irritating. I think that biotouch setting was the reason of lockup aftersoft reset, hopefully i have full backup before this change, so i make hardreset and restore everything

Problem with the 1.93.xx release.

I have a imported DIA100 phone, and trying it on the T-mobile network here in the states. everything was fine up until today when i upgraded my phone to the 1.93 series, now it randomly shuts off, and it cannot connect to the T-mobile network, keeps saying (searching). I don't know what's going on, I reflashed the device and it still does the same thing, infact it might even be worse now. Restarting the phone doesn't work, as it keeps restarting from the boot. Anyone have any idea what to do? I'm going back to 1.35.
Intradvocate said:
I have a imported DIA100 phone, and trying it on the T-mobile network here in the states. everything was fine up until today when i upgraded my phone to the 1.93 series, now it randomly shuts off, and it cannot connect to the T-mobile network, keeps saying (searching). I don't know what's going on, I reflashed the device and it still does the same thing, infact it might even be worse now. Restarting the phone doesn't work, as it keeps restarting from the boot. Anyone have any idea what to do? I'm going back to 1.35.
Click to expand...
Click to collapse
i too have many problems with 1.93.456.2 WWE baserom. somehow, it just doesn't seem so stable ... not sure if many others are feeling the same for 1.93 roms. i guess 1.37.456.2 ME WWE is still the most stable at the moment...
if only we can have a review on all official rom consolidated in one thread.
Sprite?
Did you use Sprite to backup your previous rom and store it in 1.93xxx?
This could be the cause.
ruffruff said:
i too have many problems with 1.93.456.2 WWE baserom. somehow, it just doesn't seem so stable ... not sure if many others are feeling the same for 1.93 roms. i guess 1.37.456.2 ME WWE is still the most stable at the moment...
if only we can have a review on all official rom consolidated in one thread.
Click to expand...
Click to collapse
Yes i had same problems. imo the 1.93 isnt a stable rom(yet) so im back with 1.37.456.2 this one is just perfect,very stable,less memory leakage.
Well, the problem is still on going. I can't flash my phone anymore for some reason, even though I've tried both, unsigned and signed Hard-SPL, which both of them flash fine. However, the phone gives me error [276] update error. So not sure what exactly is going on here.
Also, no, didn't sprite backup, phone's just being retarded, mobilecityonline will repair it, but it will take almost 4-6weeks, I cannot wait that long. What else should i try?
Okay, nope not fixed... Flashed it with 1.37, connected to the network for a few seconds, dialed somebody and no ring or anything, but when i called my phone i could hear my own voice. So I guess i have to send it in for repair. Damn.
berlinberlin said:
Did you use Sprite to backup your previous rom and store it in 1.93xxx?
This could be the cause.
Click to expand...
Click to collapse
Could you please detail? I've flashed 1.93.xxx just in the day it appeared on the site and after flashing, I've restored the backup made with Sprite Backup to preserve the settings and so on. I wasn't worried about the contacts/calendar since I have them in Outlook, but I didn't want to start all over with settings, install programs and so. I've made the restore in "upgrade mode", restoring also the databases. The result was that I got a verry strange TF3D, displaying "Home" between the operator name and date, and strange behaviour. I've seen also that the animations were taken out so I've flashed back 1.37.xxx.3. Could be any problems generated by the restore operation? Should I use a different restore type (eventually not selecting "restore databases")?
I have had no problem with the new 1.93xx rom.
Touch FLO 3d is quicker (probably because the animation is disabled)..
and the battery life is about 20% better
Radio ROM Anyone
Sounds like the Radio...
What version is everyone on? The 1.93 ROM updates the Radio, have you tried downgrading to 03?
mhbr12742 said:
Sounds like the Radio...
What version is everyone on? The 1.93 ROM updates the Radio, have you tried downgrading to 03?
Click to expand...
Click to collapse
I am on 05 and has no problem ( have been using it for a day now)
I don't know, but If i plug the diamond into my adapter, the network suddenly works and I can actually make calls and everything's fine and dandy, but just on the battery, I can't call anyone, and if I pull out the adapter when the phone gets a signal, the signal stays but again, can't call anyone because i can't hear anything.
It's an awkward problem. I'm not sure if it's my battery or something. So I'm getting another battery off ebay since they don't sell HTC Touch Diamonds in the U.S. yet.
I've been having random freezes with the 1.93.xxx
Anybody else experienced that?
A.
adwinp said:
I've been having random freezes with the 1.93.xxx
Anybody else experienced that?
A.
Click to expand...
Click to collapse
Yes, me I had same problem twice - freezes on PIN input screen, second problem with this release is that sometimes PIN screen doesn't appear. Now I'm back on 1.37 and everything seems to be ok
Intradvocate said:
I have a imported DIA100 phone, and trying it on the T-mobile network here in the states. everything was fine up until today when i upgraded my phone to the 1.93 series, now it randomly shuts off, and it cannot connect to the T-mobile network, keeps saying (searching). I don't know what's going on, I reflashed the device and it still does the same thing, infact it might even be worse now. Restarting the phone doesn't work, as it keeps restarting from the boot. Anyone have any idea what to do? I'm going back to 1.35.
Click to expand...
Click to collapse
THe Problem you've encountered:
1. Random auto reboot
2. Random freeze
3. etc.
It's sounds familiar to me. Well it's maybe have to do with SPL just like the Kaisers do.Well, I said maybe... So, what we did to our Kaiser before is flashing the HardSPL which has the same version number as the ROM flashed. So, if you're using ROM 1.93 then the HardSPL should be flashed is Olinex HardSPL 1.93 or you can try one by one of the developed HardSPL existed in this forum. My saying is, go with HardSPL 1.93 and see what happen. If it's still no go then it must have to do with the ROM itself.
Just my 2cents.

[Solved]Strange problem!!!!!!!!

dear friends
I am facing a strange problem on my diamond.
After flashing any ROM (whichever it may be) the loading of cabs etc takes place successfully.
But, after few minutes/hours the contents of strat/program are gone. and no program functions. I have flashed re-flashed and reflashed. cannot get over this strange proble.
Can any body guide me what wrong is happening with my diamond???
PS: I have hard SPL 1.40 olinex on my device.
Problem Solved -->http://forum.xda-developers.com/showpost.php?p=3433851&postcount=22 (Thanks cmonex)
c_shekhar:
I have a similar problem. I have had no issues flashing in the past and am very familiar with the procedure. The other day however I noticed a problem where by some of my apps would "disappear".. odd. Also after some time my phone would hard reset instead of soft reset, at first I put this down the ROM as I have had this before with udk's ROMs (no disrespect intended!) and had tried his topaz ROM. It seems to have got to the point now that once a few hours have passed my phone will lock up and then when I reset, it just hangs at the "touch Diamond" screen and I have to hard reset.
I have tried reflashing Radio, Hard SPL, OS.. I have also tried installing my apps one by one and soft reseting after each install. just whenI think it is working it will freeze again.
I have tried flashing different HARD SPL's but it always completes but when I go into boot loader it still says OLINEX 1.40.
What was the last ROM you flashed before you started noticing the issue? The last two I tried where udk syrius topaz and DIB 1.33.
I wandered if it was something to do with the data on my internal storage???
Going to try a hard reset and format movinand next to see what that does.
P.S: yours was the last ROM I used for my Polaris, it was awesome!!
I tried uDK's topaz based latest ROM and after that it started givind problem.
many a times when I prick for soft reset it hard resets the device. I have hard resetted my device several times but it does not set the problem right.Huhhh
Thanks for liking my Polaris ROM..
any headway found by you pl share.....I had borrowed somebody's Diamond and it is F*##ed up.
Same problem here
I have the same problem.
Started with morna 1.8 and then vic 3.5 and then windows net 6.5.
Seems like it keeps doing it. I just flashed a complete standard stock rom from htc from my internal storage instead of via active sync which had radio os etc all included. i then did nand reformat and copied all my data back. its almost like it forgets the apps that was installed. I also tried redoing olipro 1.4. Its running now on the stock rom from this morning. I did reset about 15 times and its still "sticking". Ill update you guys to see if anything changes.
Very very odd.
I know its not rom related and not a flashing problem - unless i flashed the diamond too many times. Ive been flashing from the good old Imate days, Kaiser, Kaiser 2 etc. So Im NOT doing anything wrong...
I new I wouldn't be the only one!!
I have just hard reset and formatted movinand AND re-downloaded all my apps so for now nothing will be going back on my internal storage that was on before.
I'll post any updates.
I have the same problem with the Morna. Flashed, reflashed, soft & hard reset.. nothing solved. Every about 24hour the TF3D won't start, the SMS&Emails folders are empty, no contacts and on desktop an error on file BOOT.MSC (can't find associated program to open that)...
After 3 days, I have flashed the Touch with the TIR11 and no one problem. I don't know if the problem is of the rom or else...
Sounds like a virus...
never encounter this problem,but some of my friends does.neither do I know why
offtopic: Are you working on a Diamond rom? I really loved (in fact I'm still using it) your 1.60.21014bCS on my polaris... I think it will be permanent... Have you thinked of making a M2D rom for Diamond ?
I had this problem if i cooked a bloated rom on my Artemis, it was easly solved by flashing an untuched stock rom directly from the operator and then flashing a custom rom again and then no problems untill i next flashed a bloated rom, i think that if the rom is too big it fills the area designed for the rom the starts to overright the hpl/spl or radio then the phone starts to crash and loose programs.
so get your opperators rom, flash, flash stock SPL, then flash h/SPL to re-unlock so you can try another custom rom
don't forget to use the H/SPL custom ruu-flasher to flash stock spl or it won't flash (its overright protected)
garymeg said:
I had this problem if i cooked a bloated rom on my Artemis, it was easly solved by flashing an untuched stock rom directly from the operator and then flashing a custom rom again and then no problems untill i next flashed a bloated rom, i think that if the rom is too big it fills the area designed for the rom the starts to overright the hpl/spl or radio then the phone starts to crash and loose programs.
so get your opperators rom, flash, flash stock SPL, then flash h/SPL to re-unlock so you can try another custom rom
don't forget to use the H/SPL custom ruu-flasher to flash stock spl or it won't flash (its overright protected)
Click to expand...
Click to collapse
Thanks for the info, i'll give that a go. Makes sense. Will have to wait till tomorrow so i'll have to put up with a crippled phone till then!!
I posted about this issue a couple of days ago,I had all the symptoms described.
After using the clear storage option on my diamond,clearing the phone and internal storage then flashing a new rom,the problem seems to be resolved.
I also experienced similar issues yesterday and for the first time ever, during the use of a udK rom.
Update
Grumps said:
I have the same problem.
Started with morna 1.8 and then vic 3.5 and then windows net 6.5.
Seems like it keeps doing it. I just flashed a complete standard stock rom from htc from my internal storage instead of via active sync which had radio os etc all included. i then did nand reformat and copied all my data back. its almost like it forgets the apps that was installed. I also tried redoing olipro 1.4. Its running now on the stock rom from this morning. I did reset about 15 times and its still "sticking". Ill update you guys to see if anything changes.
Very very odd.
I know its not rom related and not a flashing problem - unless i flashed the diamond too many times. Ive been flashing from the good old Imate days, Kaiser, Kaiser 2 etc. So Im NOT doing anything wrong...
Click to expand...
Click to collapse
Update : ITs 17 hours later and still going fine. So maybe the reflashing of the stock rom resolved it. I must say the stock rom i flashed is huge. its over 110Mb so maybe it cleaned out all the jazz. Or maybe when i reformatted the NAND it resolved the problem. I dont know. I also did a softreset about 50 times during the night removing the battery every now and then and its still ok. Ill Update again as soon as something Happens
same problem here...flashed tons of rom before...never had problems...upgraded from monrna 1.7.1 to 1.8 and the problems started..no programs...reset and install procedure restart...i've solved downgrading radio to 1.09.25.23 and flashing 2.03 original italian rom...but now i want to try to re-flash morna 1.8...i'm so curious...u know?!
Im Going to
sakara said:
same problem here...flashed tons of rom before...never had problems...upgraded from monrna 1.7.1 to 1.8 and the problems started..no programs...reset and install procedure restart...i've solved downgrading radio to 1.09.25.23 and flashing 2.03 original italian rom...but now i want to try to re-flash morna 1.8...i'm so curious...u know?!
Click to expand...
Click to collapse
Ill try another rom tonite probably morn 1.8 or wm 6.5 beta 3. and see what happens
i flashed to a HK 2.03 rom and try udk's again, so far so good, will report back any issue
I got exactly the same after the huge 6.5 beta
Clear storage was enough to get rid of it for me (no need for the internal format or the std ROM)
Thanks
goRt said:
I got exactly the same after the huge 6.5 beta
Clear storage was enough to get rid of it for me (no need for the internal format or the std ROM)
Thanks
Click to expand...
Click to collapse
Simply running clear Storage didnot solve my pro...
superpc said:
i flashed to a HK 2.03 rom and try udk's again, so far so good, will report back any issue
Click to expand...
Click to collapse
Can you kindly write more details?
Is HK 2.03 stock ROM?
Which hardSPL did you have on your device before flashing the HK 2.03?
etc...
Stability Restored
Got mine stable again by following post #10.
Flashed stock 1.93 rom then flashed stock 1.93 spl.
Now back with oli 1.93 hspl and pda corners v3 rom.

Weird upgrade bug

Hello,
Today i wanted to try the new 3volution rom for the s620 when i got an annoying bug
I spent most of the afternoon looking for an answer but found none.
Everything works well in the beginning until i got to push the center button for the screen to turn white. It turns white indeed but then activesync desynchronizes and doesnt resync anymore, so im unable to upgrade (either it stops at 3% or with kavana's doesnt detect old rom) and in some cases it says the new flash rom is corrupt..
Its like my 5th flash, and prior to today i never had a problem flashing and upgrading
So i tried reinstalling activesync multiple times, changing cables, even hard resetting my s620 (i got the nrg rose 1.7 rom on it), i even restored my comp on a previous state.. nothing
It just keeps breaking the sync when i push the center button and doesnt resync for the rest of the procedure
If someone has an idea im all ears ^^ and sorry it it has been already posted
Welcome to forums
Try a hard reset or reinstall ROM
Have a deep read here:
http://forum.xda-developers.com/showthread.php?t=537151
Hope it helped,
redownload the rom. then read this http://forum.xda-developers.com/showthread.php?t=493266
3% freeze up it very common
I am seing something similar. If I set my device down without locking it the screen goes completely white. When I first loaded the rom it didnt do it for about a week and now it does it everytime. The only changes I've made since loading the rom is that I installed Google Maps and TCPMP.
Hmm its very weird, i did the hard reset.. well it didnt work..
The 3% error i got that only once
I tried installing the official htc 6.1 windows mobile rom and got the error 244 ...
and same as always, the moment the screen turns white it disconnects from activesync and doesnt reconnect. Imho XP needs reinstalling..
So my theories so far are: activesync is buggy to the core. Ill try flashing on my laptop as soon as i get to it.
Also one thing ive noticed: in all my previous flashes i had the original htc battery.. now i got an extreme energy battery with a blue and white sticker, ill try replacing the original battery before reflashing.
As i said in my first post, this is not my first flash, and i have flashed before to kavana's then rose then kavana's again and it always went smooth.
I have been using the S620 for like one year and a half and never had a prob.
Its an htc version and it was not locked; anyway in belgium locked phones are forbidden to sale
Greetings from the land of the beer and thanks to the developpers
Which Bootloader are u using ?
The official shipped one or the modified one ?
Hmm good question, where can i see the version ? When it boots up i see the nrg rose 1.7 black screen with white writings.
Another weird thing: my keyboard is azerty, so prior to hard reset i had a language pack for french keyb, after the hard reset my keyb works just fine without any language pack installed ... not that it is a problem but i just dont understand ^^

Categories

Resources