touch screen!? - myTouch 3G Slide Q&A, Help & Troubleshooting

so all of a sudden my touch screen does not work and i think its the software cause the system keeps crashing but i cant get into recovery cause i cant use my touch screen... any help would be awesome on cm 6

nehctuk said:
so all of a sudden my touch screen does not work and i think its the software cause the system keeps crashing but i cant get into recovery cause i cant use my touch screen... any help would be awesome on cm 6
Click to expand...
Click to collapse
First off, this has nothing to do with android development, it belongs in the Q&A section.
Secondly, you can get into recovery without your touch screen just fine. While your phone is off, hold vol down + power, which will bring you into hboot. Use vol down to highlight recovery, and then press power to select it.
If you do not have s-off, you will see a screen with a !. Press vol up + power, and flash update.zip (assuming you have clockwork update.zip on the root of your sd card), and then proceed to reflash your rom.
If you do have s-off, the hboot recovery option should take you straight into recovery.

WTF I have the same problem! It just ramdomly started yesterday, I touchscreem wouldn't work on opened keyboad and today afternoon I was typing something, after I closed the keyboard the touch screen doesn't work anymore!!!
Sent from my T-Mobile myTouch 3G Slide using XDA App

This should be moved to another thread, Nothing to do with Android development

Ok DO NOT RE-FLASH A NEW ROM if your are in this situation!!!!
because I tried it and still touch planel doesn't work and I was stuck at the setup!!, thank God I recently saved a Nandroid backup, but when i went to ClockworkMod the optical track pad is no longer working neighter!!!
so I couldn't select anything!
I went to cmd on my PC and did adb shell then nandroid restore {location in sdcard}
it restored oh yes!
Optical Track Pad aiin't working neighter touch panel, like this i can hardly make calls with the keyboard, launch apps, but can't handle things that require touch or optical pad.... I can only use Tab button and enter to do little.
Fu...I need to revert everything back to stock adn get my waranty replacement..
why this had to happen?? I haven't done anything these past week :S

This happened to me also I posted my thread in q&a i believe tho, anyways tho my power button stopped working so i couldn't get into recovery. If you need a way to get back to stock without touch screen use the esprimg.zip from the factory rom champion build thread just search for it on xda. after going stock mine was still not working but I was atleast able to do a warranty exchange. hope this helps at all. Oh also this happened to me soon after flashing to CM7.

The same happend to mine a few months ago, your flex ribbon has torn, you have to send it into T-Mobile for an exchange!
Also, wrong forum
Sent from my T-Mobile myTouch 3G Slide using XDA Premium App

Not sure if its the same issue or not. But my screen will become unresponsive and soon after which ever launcher I am using will crash. Also using CM7. Was running nightly build before. Hmmm strange all of a sudden several of our phones started crashing..

You can still slide open and use the physical keyboard to select things...however I would get the stock esprimg on your device as soon as possible. Your ribbon could tear even more and leave you with a black screen and no luck of getting a replacement if you are with a custom rom.

tri4life said:
You can still slide open and use the physical keyboard to select things...however I would get the stock esprimg on your device as soon as possible. Your ribbon could tear even more and leave you with a black screen and no luck of getting a replacement if you are with a custom rom.
Click to expand...
Click to collapse
That happened to me and I had to go through Asurion, and what sux, is that the next day, Asurion ran out of slides and offerd people G2's instead.......
Sent from my T-Mobile myTouch 3G Slide using XDA Premium App

The last thing I did before I also experienced this, was that I tried to get S-Off and couldn't make it, rebooted but everything was fine, and before that I had gave a try to CynogenMod 7.... Days later I was experiencing 20kbps download and later the touch panel failed also the optical pad, so I unrooted before it'd get worst, I got my warranty replacement and now I better send the damaged one back before 7 days, otherwise they charge me $200.
Sent from my T-Mobile myTouch 3G Slide using XDA App

Related

HELP! Not quite bricked but similar!

So, I was having some FC issues using the 806 oc kernel on MyFroyo6. I switched to the 768 kernel and was fine. I tried another 806 kernel and had to go back, once again to 768. No big.
WELL, from out of nowhere, I was getting some unresponsive buttons (Home, back, etc...) they'd work eventually but were sluggish. I rebooted the phone and now it goes straight to the hboot screen. That'd be fine except my buttons do not work.
I just want to nandroid back to an earlier state but without the volume or power buttons working, that's impossible. The power button must work in some capacity otherwise it wouldn't turn on at all.
Any ideas?
I forgot to mention that it's going straight to fastboot without any help from me.
Does the trackball work? Is device visible in adb?
donkey72 said:
Does the trackball work? Is device visible in adb?
Click to expand...
Click to collapse
No and no.
It just sits in the fastboot menu. The volume buttons barely worked for a second and I managed to wipe but it's back to square one again. Stuck on the fastboot screen with no way to select the options.
I used roomie's phone to put ESPRNG.zip on the sdcard just to see if everything else is working and it is. From what I can tell, the phone is working but it's almost as though all the buttons are constantly going because it automatically went through the options I would have had to press "up" for. However, I can't control anything it's doing...
Water damage, mime did the same thing when I dropped it in the pool, give it time in a ziploc bag of white rice for about 2 Days that should do the trick
Sent from my T-Mobile myTouch 3G Slide using XDA App
Thanks! I think that might have been it. It's a moot point now seeing as how T-Mobile replaced the phone on the spot when I went in. I wasn't expecting that! I was going to ask them if they could shed some light on the problem and they just whipped out a new phone. Oh, well.

Help wipe my g2--blank screen

Can someone help me wipe my phone from recovery b/c i cant see anything on the screen but i do know the phone works and responds to touch?
I just need someone who can tell me exactly where to scroll in recovery to get to the wipe data/cache option.
Any help is very much appreciated
Unfortunately it may not be possible to help you navigate blindly because Clockword Recovery has a feature that places the confirm option among 10 choices to prevent accidental clicks. But from repeated tries it seems to come up in the same spot for me, so hopefully it might work for you.
So I can suggest that once you boot into recovery (volume down + power) and do the following.
- Press volume down 3 times and press trackpad, very very gently. Sometimes it registers a single click as two if you hold it for too long.
- Press volume down 7 times and press trackpad to confirm.
If it you select one of the "No" options on the confirmation page it will spit you back out to the main menu. So you press volume down 3 times, trackpad, volume down 7 times, trackpad.
Are you sure wiping your cache will resolve the issue you are having? It sounds like a screen defect or perhaps a resolution issue? Have you messed with your build.prop? If it doesn't work you may need to do some additional work from adb shell.
Thanks for the reply. I will try this as soon as I get back from class. I think it's a screen defect because the phone was working perfectly fine and when I came back to my phone after 10 minutes all I saw was a blank screen with the backlight on. I haven't messe with the build.prop. I have messed with the LCD density a couple times but I don't think that's what cause this issue. I just wanna try to clear all data I have on the phone so I can try to exchange it at a tmobile store lol. I know it won't fix the screen issue.
Thanks for helping. I'll see if it works. I do remeber that confirming wipe data and cache would also be the 7th option repeatedly.
Can you get into Fastboot?
Carloswithac said:
Can you get into Fastboot?
Click to expand...
Click to collapse
im not sure. i cant see anything on the screen
so, my rom did not back up and my phone on regular power on just stay on white sceen displaying htc, when i try recovery it says no images. i have a back up G2 and i am looking for a way to save the proper to the sd card so i can boot back up. any feedback would be awesome. thanks
O and I'm s on, so I guess I'm not rooted
Sent from my T-Mobile G2 using the XDA mobile application powered by Tapatalk
So I went into the T-Mobile store and got my g2 replaced
Jmsbishop, I'm new to this but ima try searching around and see what I can figure out to help you out.
Sent from my T-Mobile G2 using XDA App

[Q] How to turn Epic screen back on?

My Epic's screen turned black yesterday for no apparent reason however the touch screen still works...
if i touch and scroll the lock up it still makes the sounds and i can guess were to touch to turn my alarm off on the black screen and that works, as all the buttons! i just cant see the screen anymore,
i did not install anything new, last thing i remember doing is just taking a picture. now i have a working phone with a black screen how do i fix this?
also, i cant even see the vol down camera power screen
help please
mrose61692 said:
My Epic's screen turned black yesterday for no apparent reason however the touch screen still works...
if i touch and scroll the lock up it still makes the sounds and i can guess were to touch to turn my alarm off on the black screen and that works, as all the buttons! i just cant see the screen anymore,
i did not install anything new, last thing i remember doing is just taking a picture. now i have a working phone with a black screen how do i fix this?
also, i cant even see the vol down camera power screen
help please
Click to expand...
Click to collapse
Can you get into download mode??
With the phone off .. Press 1 (on the keyboard) and power. If so, maybe try to odin back to EC05 stock
http://forum.xda-developers.com/showthread.php?t=1027904
good luck
If on boot after pulling battery it is still black and download mode shows nothing, and you have tried Odin (it works but you see nothing still) I am afraid you need to head to the Sprint store.
kennyglass123 said:
If on boot after pulling battery it is still black and download mode shows nothing, and you have tried Odin (it works but you see nothing still) I am afraid you need to head to the Sprint store.
Click to expand...
Click to collapse
Update: after ltting my phone sit on the charger for about 3 hours it came back on
BUT it went right back to the previous (working but all black screen) problem wen
i made a call which i now remember is what triggered it yesterday
I just tried getting into download mode and it did not work or show up
anyy further suggestions? if not can i ask the sprint store 4 help if i rooted my phone and unlocked it for boost?
PS. (i been making outgoin calls for months now n this never happened even with it rooted & inlocked)
thanx 4 taking the time to answer my questions
mrose61692 said:
Update: after ltting my phone sit on the charger for about 3 hours it came back on
BUT it went right back to the previous (working but all black screen) problem wen
i made a call which i now remember is what triggered it yesterday
I just tried getting into download mode and it did not work or show up
anyy further suggestions? if not can i ask the sprint store 4 help if i rooted my phone and unlocked it for boost?
PS. (i been making outgoin calls for months now n this never happened even with it rooted & inlocked)
thanx 4 taking the time to answer my questions
Click to expand...
Click to collapse
try to odin to ec05 stock ... leave your phone again for a while and see when you get your screen back if you can get to download mode and odin that stock rom ... this will allow you to see if it is something up with a rom you're running.
if it does it then, you'll be at stock so when you go to the sprint store; it won't be an issue.
jdelano said:
try to odin to ec05 stock ... leave your phone again for a while and see when you get your screen back if you can get to download mode and odin that stock rom ... this will allow you to see if it is something up with a rom you're running.
if it does it then, you'll be at stock so when you go to the sprint store; it won't be an issue.
Click to expand...
Click to collapse
I agree Odin back to stock is your best option and if that dosn't work you probaly stuck with a black screen!
Yes, if you got it to come on once by leaving it you should be able to do it again and Odin before making any calls.
I had no choice but to take it to the sprint store
they fixed it !!!
thankx again guys 4 all ur help!
mrose61692 said:
I had no choice but to take it to the sprint store
they fixed it !!!
thankx again guys 4 all ur help!
Click to expand...
Click to collapse
great news, glad you have a working Epic again.
mrose61692 said:
I had no choice but to take it to the sprint store
they fixed it !!!
thankx again guys 4 all ur help!
Click to expand...
Click to collapse
Hey, I know this is an old post but I have an old Epic I'd like to see if I can trade into for credit towards a Galaxy S III but I'm having the exact same problem as described here:
Softkeys light up, screen hepatic feedback "buzz" can be felt, can swipe to unlock and answer a call based on blind-memory of what to swipe but other than that, the screen is completely black. Not black as in lit up but devoid of any other color except black, but gone dark.
If it weren't for the softkeys being lit, I would assume the screen were either broken or disconnected from the motherboard somehow. There are no cracks in the screen. Phone has seen better days for sure but the screen is intact and all functions were working perfectly before it simply...blipped off in front of my eyes.
I've tried doing as you did: charging it for 3+ hours and seeing if that worked at least temporarily. No go.
Assuming our two phones were experiencing exactly the same issue, can you tell me when you had it repaired, if the issue was a hardware or software issue? If hardware, did they have to replace the screen? or was it merely not connected properly somewhere?
If it was a software issue, how did they repair it? I'm assuming I can, in fact, get the phone into download mode, but without a visible screen, I can't boot off of a zip file or see if any of my actions are successful. Can't be sure I cleared the caches properly before I proceed, etc.
Phone was last running toadlife's CleanGB prior to the FC09 update and I'm pretty sure, prior to EL30 (I can't remember but I'm pretty sure it was).
Again, I know this is old but any feedback would be appreciated.
navkat said:
Hey, I know this is an old post but I have an old Epic I'd like to see if I can trade into for credit towards a Galaxy S III but I'm having the exact same problem as described here:
Softkeys light up, screen hepatic feedback "buzz" can be felt, can swipe to unlock and answer a call based on blind-memory of what to swipe but other than that, the screen is completely black. Not black as in lit up but devoid of any other color except black, but gone dark.
If it weren't for the softkeys being lit, I would assume the screen were either broken or disconnected from the motherboard somehow. There are no cracks in the screen. Phone has seen better days for sure but the screen is intact and all functions were working perfectly before it simply...blipped off in front of my eyes.
I've tried doing as you did: charging it for 3+ hours and seeing if that worked at least temporarily. No go.
Assuming our two phones were experiencing exactly the same issue, can you tell me when you had it repaired, if the issue was a hardware or software issue? If hardware, did they have to replace the screen? or was it merely not connected properly somewhere?
If it was a software issue, how did they repair it? I'm assuming I can, in fact, get the phone into download mode, but without a visible screen, I can't boot off of a zip file or see if any of my actions are successful. Can't be sure I cleared the caches properly before I proceed, etc.
Phone was last running toadlife's CleanGB prior to the FC09 update and I'm pretty sure, prior to EL30 (I can't remember but I'm pretty sure it was).
Again, I know this is old but any feedback would be appreciated.
Click to expand...
Click to collapse
Hm, so you're saying download mode or recovery mode open up but with a black screen? But it still reads touches? My guess is it's hardware, a loose connection to the screen.
Yeeeeah, good luck towards funding your S3 purchase.
Sent from my SPH-D700 using XDA
I'm having this issue have my phone was dropped yesterday, so I'm quite sure it's a hardware issue.
I have two questions: can somebody be so kind as to give me the button sequence for how to make a nandroid of my phone? I have CWM 5.0.2.7 without the 'one confirm' option. That would be awesome. Also, is anyone familiar with taking the phone apart and perhaps how to fix this issue?
chillywings said:
I'm having this issue have my phone was dropped yesterday, so I'm quite sure it's a hardware issue.
I have two questions: can somebody be so kind as to give me the button sequence for how to make a nandroid of my phone? I have CWM 5.0.2.7 without the 'one confirm' option. That would be awesome. Also, is anyone familiar with taking the phone apart and perhaps how to fix this issue?
Click to expand...
Click to collapse
A guide to take it apart is here:
http://forum.xda-developers.com/showthread.php?t=1569701
and steps to nandroid
3 finger salute for about 5 seconds
toggle down 4 times hit cam button 2 times
tazfanatic said:
3 finger salute for about 5 seconds
toggle down 4 times hit cam button 2 times
Click to expand...
Click to collapse
Thanks tazfanatic. I tried the backup procedure and it didn't seem to work, and I think I actually have CWM 5.5. Is the procedure any different?
chillywings said:
Thanks tazfanatic. I tried the backup procedure and it didn't seem to work, and I think I actually have CWM 5.5. Is the procedure any different?
Click to expand...
Click to collapse
not sure 5.5? is that the touch version?
tazfanatic said:
not sure 5.5? is that the touch version?
Click to expand...
Click to collapse
CM9 version.
Sent from my PantechP4100 using xda premium
kennyglass123 said:
CM9 version.
Sent from my PantechP4100 using xda premium
Click to expand...
Click to collapse
Oh i have cm9 that is the direction I gave thought cm9 came with 5.0.2.7 my bag.
tazfanatic said:
Oh i have cm9 that is the direction I gave thought cm9 came with 5.0.2.7 my bag.
Click to expand...
Click to collapse
Indeed. I'm running CM9 beta 2, and I'm pretty sure it came with 5.5. However Taz, I believe if you boot into recovery from ROM Manger or the power menu, it still takes you into your previous recovery version (such as 5.0.2.7). Or vice versa. I don't remember. To my knowledge, this is has something to with the switch to MTD, and the devs just have reroute that command.
But regardless, I'm not getting a new backup on my SD card, so I'm pretty sure I'm on 5.5. Kenny, do you know if there's a different button sequence for 5.5?
5.5 is the same. I would remove the battery to make sure it is powered off. Put the battery back in, hold camera, volume down and power in that order (making sure power is last) for 5 seconds. wait 20 seconds to make sure it booted into CWM 5.5. Then volume down 4 times then camera twice. Depending on how many apps you got I would wait 30 minutes before pulling the sd card to check in clockworkmod\backup directory for a new file with current date code.

Erratic screen with any rom except stock

When I have a rooted rom on my EVO the screen begins to act all crazy. it will register a hundred touches or register your touch in the wrong spot or not register your touch at all. I thought it was the digitizer getting ready to go out but when I put a stock rom on the phone everything is fine. I am S-Off and have Amon_Ra 3.11. Has anyone else experienced this?
I also noticed that I can't select anything on the pop-up windows on the stock rom. If you want to connect to a wifi network, you select it and a pop-up window pops up..it will not let you select connect. I ordered a new digitizer just to see if thats the problem.
Ok. Replacing the digitizer fixed it. Now running CM7.2 and everything is groovy.
Yeah I was going to say, that shouldnt be anything that the rom is causing or if it was a simple reflash or wipe should fix something like that. Our poor evos are starting to get old and failing on us :/
Glad you got it fixed man!

Sensitive power button

My samsung galaxy s2 has sensitive power button for some reason. I'm not sure if its the roms i have been flashing. But im on IML74K_Ics_Perfection_UCLD2 and if the slightest touch on the power button turn on my phone when it is off. Or it can turn it when the phone is locked. But i can even press it all the way down for even a split second without it rebooting and going into a bootloop and taking me many tries to actually boot up. Is this a hardware problem with my phone should i restore my phone to stock and return back to tmobile or is this a ics problem with the roms?
NightCalyster said:
My samsung galaxy s2 has sensitive power button for some reason. I'm not sure if its the roms i have been flashing. But im on IML74K_Ics_Perfection_UCLD2 and if the slightest touch on the power button turn on my phone when it is off. Or it can turn it when the phone is locked. But i can even press it all the way down for even a split second without it rebooting and going into a bootloop and taking me many tries to actually boot up. Is this a hardware problem with my phone should i restore my phone to stock and return back to tmobile or is this a ics problem with the roms?
Click to expand...
Click to collapse
Have you tried using any different roms? Is the issue still present? I haven't had or read about this issue before, and I've tried my fair share of roms.
I have tried the darkside roms but im starting to think its the phone and i think is should get it replaced then.
Yeah it shouldn't be so sensative.
Sent from my SGH-T989 using xda premium
i feel your pain
NightCalyster said:
My samsung galaxy s2 has sensitive power button for some reason. I'm not sure if its the roms i have been flashing. But im on IML74K_Ics_Perfection_UCLD2 and if the slightest touch on the power button turn on my phone when it is off. Or it can turn it when the phone is locked. But i can even press it all the way down for even a split second without it rebooting and going into a bootloop and taking me many tries to actually boot up. Is this a hardware problem with my phone should i restore my phone to stock and return back to tmobile or is this a ics problem with the roms?
Click to expand...
Click to collapse
i just started experiencing this last night. RIGHT after getting my battery replaced after two weeks of dealing with that problem and finally realizing it was my battery and not my phone. then i tried to take a screenshot of my new battery stats (without all of the huge sudden depletions) and my phone reset as if i held the power button down for 5 seconds. i read about a woman in india getting her button repaired for 550 rupees ($10), but i'm wondering if i should just get a whole new unit and be done with it. the problem with that is dealing with setting up all my apps over again. i have titanium backup (root version) but the last time i got a new phone it didn't put all my apps back on my phone. maybe i did something wrong. i'll email them for detailed instructions and see if it's better to get the button or the phone replaced.
Definitely the power button! After I hardbricked and revived it, my phone had an internal short, which made my phone constantly power off my phone, restart my phone over and over, etc. Josh at mobiletechvideos had to try and work around. He disabled my power button and remapped the wake buttons. So now I wake this phone via the volume rockers on roms that support that
I digress. If you can't send it to T-Mobile to get repaired, give mobile tech videos a shot. Just 35$ and they're super swift
Sent from my SGH-T989 using xda premium
I wonder what's actually causing this power button thing??
I was literally just browsing email, clicking around a little fast, back to home screen and FLASH!!! my camera flashes and all this same $hit starts happening...boot loop, sensitive button, booting out of recovery mode even. I just doesn't add up to sudden button failure...does it??? Why would the camera just flash out of nowhere? Some of the boot loops would also get interrupted and start over. Recovery mode is also kind of screwy. I tried to restore to a backup of Beastmade rom and it just reflashed Sith, the same rom I've been on!! And all my other backups/nandroids are missing. Something is fishy here.
I did recently go to TWRP and have been on the Sith Rom (clones & drones).
Yep its the power button ! I had this problem a month ago , but for me it completely went away .. maybe something was just stuck in between and the constant pressing of the button loosened whatever it was
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
agentg1001 said:
Yep its the power button ! I had this problem a month ago , but for me it completely went away .. maybe something was just stuck in between and the constant pressing of the button loosened whatever it was
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Cool. What did you do?? Warranty? I do still have until Oct 25th for my warranty.
agentg1001 said:
Yep its the power button ! I had this problem a month ago , but for me it completely went away .. maybe something was just stuck in between and the constant pressing of the button loosened whatever it was
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Same happened to me. Was sensitive for about 4 days then started to work properly again.. Thought I was the only one lol
Sent from my SGH-T989
The thing that has me curious is how mine started acting up. I wasn't even touching the power button. I was just clicking around gmail, went to home screen, the camera flashed and it started boot looping. It would sort of zap out in the middle of a reboot like there was a power issue and lot of other stuff was messed up including TWRP recovery! This tells me there is something else going on...more ROM related. Seems like all this started happening when these ICS ROMS dropped...none of them are as stable as Juggernaut, Paradox, etc...NONE of them. My power button does indeed seem defective, but it almost seems like it was a bi product of something else.
escrowdog said:
The thing that has me curious is how mine started acting up. I wasn't even touching the power button. I was just clicking around gmail, went to home screen, the camera flashed and it started boot looping. It would sort of zap out in the middle of a reboot like there was a power issue and lot of other stuff was messed up including TWRP recovery! This tells me there is something else going on...more ROM related. Seems like all this started happening when these ICS ROMS dropped...none of them are as stable as Juggernaut, Paradox, etc...NONE of them. My power button does indeed seem defective, but it almost seems like it was a bi product of something else.
Click to expand...
Click to collapse
ROM related. No. Its a faulty power button. Been many threads describing your situation. Ends up being a faulty power button. Mobiletech offers a power button service. Its reasonably priced.
Sent from my SGH-T989 using xda premium
Sent mine for repair of power button. Waiting for it to come back. I bricked it after I contacted them trying to restore to factory and they replaced the PBA (motherboard) as well.
Sent from my SGH-T959 using xda premium
LoopDoGG79 said:
ROM related. No. Its a faulty power button. Been many threads describing your situation. Ends up being a faulty power button. Mobiletech offers a power button service. Its reasonably priced.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I was lucky enough to get flashed back to stock and have a warranty replacement on the way. Still has me wondering if something else wasn't up. Just seems like all the ICS based ROMs have been very buggy compared to the very stable Gingerbread builds. I sure enjoyed my rooted phone but this has been a PITA losing my device...it's my work and life! I haven't been stock in so long it will be interesting to click around a bit and see if I'm not better off stock. I'm due for an upgrade next month so I may well be on to an S3 or whatever else is out.
Just got my replacement this afternoon!!! Man...what a couple of days it's been without it! Holy crap, I had no idea.
Anyway the new phone shipped with 4.04. So that's cool. So far THIS is the most stable ICS rom I've used. :silly:
I know this post is ancient, but ....
Two years later, I'm experiencing this power button problem and I'm on KitKat - SlimKat 7.0 stable.
danishdish said:
Two years later, I'm experiencing this power button problem and I'm on KitKat - SlimKat 7.0 stable.
Click to expand...
Click to collapse
This service worked great for me, if u hurry they are also on sale
http://m.ebay.com/itm?itemId=221351645699
Emmanuel U said:
This service worked great for me, if u hurry they are also on sale
http://m.ebay.com/itm?itemId=221351645699
Click to expand...
Click to collapse
Thank you.
Sent from my SAMSUNG-SGH-T989 using Tapatalk
Dah... just went locally to have it serviced... got screwed at 100$...
Should have searched online before...
I had the SAME EXACT issue. I had to literally remove my power button because my device would reboot every few minutes. I use the volume keys to wake the device and sleep shortcut in the notification bar to sleep. If my device turns off, I have to turn it on with a USB, which is a major hassle but I've grown used to it.

Categories

Resources