Latest Odin Download Help? - Epic 4G Q&A, Help & Troubleshooting

Could someone please link me to latest verison of odin for the epic. Im putting my phone back to stock and the how to guide in the dev section link wont work!

http://forum.xda-developers.com/showthread.php?t=773032
If you're returning to stock, use the DI18 file, that's the only official stock out now, unesless you want the "official" froyo Stock, EB13, which was pulled because it was causing problems for some users.
Follow the directions in that thread, and you shouldn't have an problems.

JSarella said:
http://forum.xda-developers.com/showthread.php?t=773032
If you're returning to stock, use the DI18 file, that's the only official stock out now, unesless you want the "official" froyo Stock, EB13, which was pulled because it was causing problems for some users.
Follow the directions in that thread, and you shouldn't have an problems.
Click to expand...
Click to collapse
i was using that thread and the odin file download link doesnt work!
EDIT: since i will be using downloading the DI18 file. do i need to get a new pit file or a new stock kernel? bc all the ones in that thread i wud guess are for dg27 right?

never mind i got the pit file and odin and the di18 fw. but it says have auto-reboot and debug-en checked and nothing else. i dont see debug-en???!!!

The tar file has the kernel in it, it returns it to the condition that it was in when you first activated the phone.
Here's a step by step list of what to do. http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SPH-D700#Odin_Stock_Flashing
Download this, http://www.sdx-downloads.com/devs/noobnl/Odin3+v1.61andepic.pit.zip
Then this, http://www.multiupload.com/X9AB1U56JV , use the download from megaupload, its going to be the quickest.
Then just follow the directions in the first link in this post.

JSarella said:
The tar file has the kernel in it, it returns it to the condition that it was in when you first activated the phone.
Here's a step by step list of what to do. http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SPH-D700#Odin_Stock_Flashing
Download this, http://www.sdx-downloads.com/devs/noobnl/Odin3+v1.61andepic.pit.zip
Then this, http://www.multiupload.com/X9AB1U56JV , use the download from megaupload, its going to be the quickest.
Then just follow the directions in the first link in this post.
Click to expand...
Click to collapse
but in the other put it says something about debugen and i dont see it! im using odin3 v1.61

Dont worry about what that says lol, just follow those directions.
And I'm not sure what that debugen is referring to.

JSarella said:
Dont worry about what that says lol, just follow those directions.
Where exactly did it say to put it in debug-en?
Click to expand...
Click to collapse
at this thread right here http://forum.xda-developers.com/showthread.php?t=773032
what should i have checked if i want to do a full wipe back to original fresh out of box?
EDIT: And plus I dont see any checkbox that says debug-en
EDIT: also my phone isnt plugged in yet or in download mode, so maybe thats why its not showing..??? i just wanted to clarify all this info before i began!

just finished it. came out great. thanks for the help!

Apparently I stumbled here in this thread as a Google hit for latest odin.
Now is "latest Odin" different version for every Samsung device? I am looking for the latest one to flash my Galaxy Tab 10.1 WIFI with, and I am lost in this "Epic" thread.
Any ideas? Thanks

The best instructions I've seen are at http://tinyurl.com/epicfix

Even though your issue has been replied to, you should go to your device's forum for questions. Rule of thumb is also to search said forum and not necro threads.
Happy hunting.

Related

How to go back to stock?

THIS PROBLEM HAS NOW BEEN FIXED, GO TO POST #19 FOR STEPS I TOOK TO FIX THE PROBLEM - thanks alot to the help below.
I recently installed or flashed (whatever the term is), a rom/theme thing to my phone. Now it hasn't worked out how I liked, and I want to go back to stock, but when I restart the phone and go to wipe date/factory reset, it just restores to the ROM's startup..
How can I go back to the stock 2.1 installation on my phone, so I can try the official update to Froyo, and not these ROMs.
However, is there a benefit to using any of the ROMs that have been posted on this site? Aside from the themes of course..
Thanks
Denno
aside from the themes, the cook normally remove bloatware from samsung and all that. to speed things up and free some space. with custom kernels, themes (like you said) and all that good stuff.
to go back to a stock rom, you simply flash your stock rom.
if your stock rom's a dxjg4, you flash dxjg4 and so on.
Thanks Adevem.
How do I go about getting my stock rom? I have no idea what my stock rom actually was though :S. I've heard lots of talk of flashing so many different roms and to be honest, it's quite overwhelming to try and work it out..
I am also keen on getting back my Optus app that was on the phone, which told me how much of my cap I have used etc.. Will this be possible? Without contacting Optus themselves, as I'm not sure if what I did with the phone is allowed within the contract.. The Optus app isn't in the Market either..
I did backup all of my apps and stuff using Titanium Backup before I installed the ROM, but I can't Restore the Optus ones :S. I can restore other ones though... It could be because they're not made to run on Android 2.2 yet, but if not, then I don't know..
once you've flashed your phone you've voided your contract ;p sorry to say.
since you're Optus... you're gonna have to ask around what was the stock rom for Optus, cause i have no idea.
once you've found out, head over to http://www.samfirmware.com/WEBPROTECT-i9000.htm, download your rom and flash back to stock. the optus applications should be installed properly back on the rom. if it doesn't, send me a pm and i might have a work around with a detailed guide.
Thanks heaps!! I know 3 other people who have the same phone with Optus (I talked it up quite a bit when I got it lol)
How do I get them to check the ROM though? Do I go to Settings > About Phone?
And what do I look for in there? I see Firmware Version, Baseband Version, Kernel Version, Build Number.
Which is the one I want from them?
Thanks heaps.
I'm not sure if the following links below will help, you could try it, and make sure you can get into download/recovery mode with the buttons before doing anything as warned in the link too.
Firmware: http://forums.whirlpool.net.au/archive/1537182
Optus my account app: http://forum.xda-developers.com/showthread.php?t=742310 (8th post for download link)
*#*#1234#*#* will show you the version for
PDA
MODEM
CSC
cross check with the firmware you're about to flash / after you've flashed.
Amazing guys, thanks so much
Sent from my GT-I9000 using XDA App
Cool, post back again when you get everything worked nicely, someone else like you with this problem might ask in the near future Enjoy!
Ok so I've got the digits from my mate, but I can only find the PDA one on samefirmware. I can't find the PHONE or CSC one.
Here are my numbers:
PDA: I9000DTJG4
PHONE: I9000DTJG3
CSC: I9000OPSJG1
Is it just the PDA that I need to get? Or do I need the other two aswell?
Thanks..
denno020 said:
Ok so I've got the digits from my mate, but I can only find the PDA one on samefirmware. I can't find the PHONE or CSC one.
Here are my numbers:
PDA: I9000DTJG4
PHONE: I9000DTJG3
CSC: I9000OPSJG1
Is it just the PDA that I need to get? Or do I need the other two aswell?
Thanks..
Click to expand...
Click to collapse
you mean the site only provide the pda file? just flash it anyway, put the tar file as pda. some firmwares are packed all in one.
do report back if it matches!
Ohk cool..
Well some what cool... I have no idea how to flash it lol. It says on samfirmware to follow their guide 100%, but I can't find their guide?
I feel like such a douche.. I'm studying software engineering and I can't work this out, but I've never seen this stuff before... :S
Sorry for the newb questions..
Wait... this might be a stupid question, but if you don't know how to flash a ROM, how did you get the new ROM on your phone in the first place?
Well I followed the directions in the Darksys forum post. All that involved was putting a file on the root of my internal card, and then restarting the phone into the recovery mode.. That wasn't so hard..
Is it the exact same thing? I keep hearing so many different things, like using Odin, or playing with Kies and the registry..
I'm just confused as to what the heck I'm supposed to do.
Could someone please just point me toward a place that will guide me through the flashing?
I don't wanna stuff my phone up anymore than it already is..
You need to use Odin. If you look at the bottom of the samfirmware page (very bottom) you'll see PDF guides in a couple languages.
It's pretty easy, put phone in download mode (volume down + center button + power), plug in, open Odin, click PDA and select your .tar file. If you want to repartition, select the PIT indicated on samfirmware and check repartition. And click Start.
Phone will then flash the ROM and reboot, pretty simple =P
denno020 said:
Could someone please just point me toward a place that will guide me through the flashing?
I don't wanna stuff my phone up anymore than it already is..
Click to expand...
Click to collapse
http://nfye.com/toolkit/Doc-Froyo.pdf
there are some instructions here.. they are not exactly your firmware that you want to flash but it will give you an idea..
on samfirmware where you downloaded the rom it should say if it need a 512 or a 803 pit file
Check that before you do anything ;-)
Argh, they're so obvious down there aren't they lol. I was looking in the menu at the top for a 'tutorial' option or something similar.
Thanks for the quick tip though, I shall hopefully be able to run with it now .
I'll try and document the whole thing and then show everyone what I've done (providing it works for me, otherwise Ima be very p'd off lol)
Yeeeeeeah!! soo happy. Thanks guys, this worked perfectly! I've got the MyAccount for Optus app back in that ROM too!
It was so easy wasn't it! wow lol.
Anyways, I didn't really document it, as there isn't anything I did any different to the instructions here, but to reiterate, this is what I did:
My phone was already rooted, so I used a program - Android Commander - on my PC, to copy EVERYTHING from my phone to my computer (back-up). This can only be done if your phone is rooted though.
Then I downloaded the following firmware from samfirmware: NB. I culd only find the PDA, but as it turns out, this was all I needed (in my case, with this firmware)
I have a Galaxy S I9000 with Optus in Australia, so my digits were:
PDA: I9000DTJG4
PHONE: I9000DTJG3
CSC: I9000OPSJG1
Next I downloaded Odin from samfirmware.com, and also downloaded the tutorial from the very bottom of the Firmwares page
I then had everything downloaded, so I opened the tutorial and followed that exactly
You need to also make sure you backup your contacts, as they will all be lost. I was lucky that I did the copy of the whole contents of my phone, as I hadn't properly synced my contacts with my google account, but I have remedied this now .
I'm now back with my stock Eclair firmware, complete with Optus MyAccount app, and I couldn't be happier .
Now to find a proper upgrade to Froyo .
Thanks for the help guys, very much appreciated.
Denno
there's actually a video on youtube on how to flash. damn it, I should have linked it to you. helped me on the first time I got an android.
anyway, glad you got it all figured out!

[Q] I need help unrooting my phone.

Okay so I'm a noob with rooting Samsung phones. Well I think somehow I did a bad flash I used the one click method and ever since then I've had continuious problems with my phone. Nomatter which rom I flash I have the same problem a constant reboot that gets stuck in a bootloop and the only way to stop it is to pull the battery out also it shuts off in the middle of the night while charging. I was going to use odins unroot but every link I find is not working. I finally downloaded odin3 1.62 but I can't find the files or instructions to use it. If anybody can help it would be greatly appreciated.
The roms I have tried are:
Syndicate
Mammons 2.2
Epic experience
And I believe heroic.
Currently running mammons 2.2
Thanks again.
Check the stickies in the development section, there is even a link to the wiki which lists the instructions and has links to the necessary files.
To save you a couple clicks, go here:
http://forum.xda-developers.com/showthread.php?t=794138
The first link in the first post goes to instructions on how to use Odin. The second link is the DI18 file used to flash your phone back to stock.
I have never tried the 1.61 version of Odin, or the 528.pit file, but the page with the instructions has the older version and a link to the 512.pit... I know for a fact that those work just fine, so I would suggest using those first before trying the newer files.
Hey thanks for all the help. My Epic is back in working order. Need to find a better way to root now.
bleedblaqk336 said:
Hey thanks for all the help. My Epic is back in working order. Need to find a better way to root now.
Click to expand...
Click to collapse
First off this needs to be in the development section, this is themeing. The best way to root is with the one-click posted by noobnl. Version 2.40 should be compatible with any ROM on here, and it is very easy to use. Just follow the instructions in the sticky in the dev section.

[Q] [HELP] Soft Bricked i9505

I rooted my GS4 yesterday and had no issues at all until i tried to flash a MOD to obtain wireless hotspot, but what i didnt notice was the MOD was for a Sprint version GS4. I know know if thats exactly what made my phone brick but im pretty positive because it was during the reboot that the phone got stuck on the TMO screen and apparently remaining soft-bricked. I spent the rest of the night and all of today reading and researching how to fix it myself before coming here to ask for help, so please bare with me.
I have already attempted to flash the official stock firmware using Odin, but it displays an error everytime saying it failed and something about AUTH. Sorry if im sounding vague, i am on a back up phone to use the internet and forgot to right down the exact message.. Anywho, i tried wiping everything and redoing the process and i even tried to flash the appropiate PIT file that i found but it still displays an error and says failed because of some AUTH or SEC problem.
Ive been at this diligently for almost 12 hours. My brain is filled with all these suggestions and methods that i have tried to use to restore my phone back to factory, but none of them have worked. I can still get into recovery and all that, so im assuming that there is still good chance i could fix the problem?
Also i am starting to get myself more and more confused about whether the firmware i downloaded is the right one i need for my phone, it seemed so at first but now i see theres TONS of region codes that can determine the firmware version?
Sorry if im all over the place, but i just dont know which step to take next..
I appreciate any help that is given, and im even willing to pay (some) bucks or maybe even (btc) for someone to walk me through what i need to do or what im doing wrong.
Thanks in Advance
Have you followed every single thing in the return to stock thread? Including updating your drivers, using the USB cable that came with your phone, running Odin as admin, etc?
Toleraen said:
Have you followed every single thing in the return to stock thread? Including updating your drivers, using the USB cable that came with your phone, running Odin as admin, etc?
Click to expand...
Click to collapse
No i havent tried that threads strategy, although i have done the same exact steps but only difference i see is that the firmware file name is:
M919UVUAMDL
While the one i was trying to use earlier was:
I9505XXUAMDM
This is where im getting very confused because i cant find a cut and dry way of knowing which firmware is the correct one..
koolbreez12 said:
No i havent tried that threads strategy, although i have done the same exact steps but only difference i see is that the firmware file name is:
M919UVUAMDL
While the one i was trying to use earlier was:
I9505XXUAMDM
This is where im getting very confused because i cant find a cut and dry way of knowing which firmware is the correct one..
Click to expand...
Click to collapse
You do have the T-Mobile SGS4, correct? Any files with I9505 in the name are for the international version, which is what you flashed (not the right file). All of ours will mention SGH-M919, M919, or jfltetmo in the file name. Pull the one in the thread I linked above and push that.
Crossing your fingers while doing so couldn't hurt...
Edit: I'd recommend using the "Download UVUAMDL Official TAR" in that thread as well, not the "stock tar (original)", since the MDL is official.
Toleraen said:
You do have the T-Mobile SGS4, correct? Any files with I9505 in the name are for the international version, which is what you flashed (not the right file). All of ours will mention SGH-M919, M919, or jfltetmo in the file name. Pull the one in the thread I linked above and push that.
Crossing your fingers while doing so couldn't hurt...
Edit: I'd recommend using the "Download UVUAMDL Official TAR" in that thread as well, not the "stock tar (original)", since the MDL is official.
Click to expand...
Click to collapse
Thanks so much, i feel stupid for not realizing the difference between the two haha. Im d/l the firmware from the thread you referenced as we speak so i definitely will keep my fingers crossed and let you know how it turns out!
Thanks again. Im not sure how to give a thanks on here or credit for you help but your help is definitely appreciated.
error post
If you can get into download mode i would suggest flashing stock with that then rerooting that way the program downloads all of the nessacary stuff on its own.
koolbreez12 said:
Thanks so much, i feel stupid for not realizing the difference between the two haha. Im d/l the firmware from the thread you referenced as we speak so i definitely will keep my fingers crossed and let you know how it turns out!
Thanks again. Im not sure how to give a thanks on here or credit for you help but your help is definitely appreciated.
Click to expand...
Click to collapse
Welcome!
Sent from my SGH-M919 using xda premium

Going from CM11 To Stock? (Model: Sghi747)

Hey guys, I am new to this forum here but before anyone flames me, I did read the faqs and tried to uninstall from there but it did not work out. Apparently I dont think you can get rid of CM11 since you cant install any stock firmware older than it? Before I installed CM11, I was on jellybean. I had tried to find the latest kitkat update for the s3 (att) and there is no file of it found online (tried sammobile). When I tried flashing an older firmware with ODIN, it just fails at "NAND!". Any help would be appreciated. I am COMPELETELY new at this so specific directions would be appreciated!
I really do love cyanogenmod but there are simply too many glitches and not enough guidance on how to fix em. I am, however, currently using it on my HP touchpad, if anyone remembers what it is . Maybe ill go back to using it in the future.
thanks!
Your rom (cm) has nothing to do with what firmware you can or cannot flash. Once you have updated to 4.3 firmware or newer, you can only flash the same or newer firmware in odin from now on. (Regardless of firmware you can still flash older roms btw)
Using terminal emulator, enter this to find your current firmware build:
getprop ro.bootloader
I suspect you are on a 4.3 build. So odin flash that same firmware. You can find it in these forums. After that you can get the ota to update fully to kk.
There are other methods of updating. Just check the General section. (enewman17 has a few threads that will help)
Note: anytime you go between touchwiz and non touchwiz roms, you will have to factory reset or it'll hang at boot.
DocHoliday77 said:
Your rom (cm) has nothing to do with what firmware you can or cannot flash. Once you have updated to 4.3 firmware or newer, you can only flash the same or newer firmware in odin from now on. (Regardless of firmware you can still flash older roms btw)
Using terminal emulator, enter this to find your current firmware build:
getprop ro.bootloader
I suspect you are on a 4.3 build. So odin flash that same firmware. You can find it in these forums. After that you can get the ota to update fully to kk.
There are other methods of updating. Just check the General section. (enewman17 has a few threads that will help)
Note: anytime you go between touchwiz and non touchwiz roms, you will have to factory reset or it'll hang at boot.
Click to expand...
Click to collapse
..
I am on "I747UCUEMJB"
and i am not sure what build i am on but according to my "build number"this is what it says: "cm_d2att-userbug 4.4.2 KOT49H"
The main issue is, I cannot find 4.3 update anywhere on the internet
The MJB is your current firmware/bootloader build/version.
The build number displayed in settings only represents the rom, which is often different, and doesnt really matter to much.
From this post/thread
http://forum.xda-developers.com/showthread.php?p=52341560
Direct link to MJB firmware
http://www.androidfilehost.com/?fid=23329332407590581
DocHoliday77 said:
The MJB is your current firmware/bootloader build/version.
The build number displayed in settings only represents the rom, which is often different, and doesnt really matter to much.
From this post/thread
http://forum.xda-developers.com/showthread.php?p=52341560
Direct link to MJB firmware
http://www.androidfilehost.com/?fid=23329332407590581
Click to expand...
Click to collapse
i have no idea what MJB means (i google'd it) and i just found out what my bootloader version is via download mode (its at the very bottom) and i have version 2.0?
ok downloading the giant file now. will report details. just follow instructions in the first link?
[sorry, like i said, im a noob so i really apologize for the lack of terms here]
MJB is just short for I747UCUEMJB. Sorry if I confused you. And the S/W revision being 2.0 is what Odin uses to know what firmware it is allowed to flash. In this case 2.0 tells odin it can flash the MJB firmware, or anything newer.
And yes, follow the instructions he posted and you should be fine.
Oh, and if you did not run the getprop command I posted before, please do so before flashing....just to be on the safe side. If it returns I747UCUEMJB, you are good to go. If it returns anything else, let me know before flashing.
DocHoliday77 said:
MJB is just short for I747UCUEMJB. Sorry if I confused you. And the S/W revision being 2.0 is what Odin uses to know what firmware it is allowed to flash. In this case 2.0 tells odin it can flash the MJB firmware, or anything newer.
And yes, follow the instructions he posted and you should be fine.
Oh, and if you did not run the getprop command I posted before, please do so before flashing....just to be on the safe side. If it returns I747UCUEMJB, you are good to go. If it returns anything else, let me know before flashing.
Click to expand...
Click to collapse
Cool! Got it. I think that was my main problem. I could only find 4.0 (or 4.1) and have been trying to use that on ODIN. Perhaps that was the main issue....
Oh already ran it and got "I747UCUEMJB", sorry if didnt say it properly.
Really appreciate the help! Ive at this for days and no solutions. Sometimes the hacking/custom firmware isnt for everybody
Ill update what happens. Download is taking forever.
EDIT: BTW, for the first link, which poster am I gonna have to follow? im assuming "garbage guy"?
I though you did run the command already, but just wanted to be certain is all. For some reason AT&T stopped releasing their firmware, which has been causing all kinds of problems for people.
Anyway, it sounds like you are good to go! Good luck!
Oh, and if the firmware you're downloading is a .zip or .7z file, make sure you extract it first. Odin only flashes .tar and .tar.md5 files.
DocHoliday77 said:
I though you did run the command already, but just wanted to be certain is all. For some reason AT&T stopped releasing their firmware, which has been causing all kinds of problems for people.
Anyway, it sounds like you are good to go! Good luck!
Oh, and if the firmware you're downloading is a .zip or .7z file, make sure you extract it first. Odin only flashes .tar and .tar.md5 files.
Click to expand...
Click to collapse
Thank you so much! It finally worked! I got the reset notification and I am now back on JB
Thank you! should I take any more steps to ensure I made a clean installation or am I good after flashing it?
david12795 said:
Thank you so much! It finally worked! I got the reset notification and I am now back on JB
Thank you! should I take any more steps to ensure I made a clean installation or am I good after flashing it?
Click to expand...
Click to collapse
Weird, I went straight to update phone and it said my phone is up to date? I thought the official 4.4 update came out for the S3?
david12795 said:
Thank you so much! It finally worked! I got the reset notification and I am now back on JB
Thank you! should I take any more steps to ensure I made a clean installation or am I good after flashing it?
Click to expand...
Click to collapse
Awesome!
really glad to hear that! The only thing I can think of thst you might want to do next is backing up your nv data. The following is a copy/past from a post I made a few min ago... root is required to fo this btw, just so you know.
(Since you are looking to update though, I recommend waiting till you have updated before rooting and running this backup)
It's a super simple procedure and will create an on device backup of your nv data. The backup will be stored on a couple of partitions we never touch, not even with firmware flashes. This essentially makes it a permanent backup. The cool thing about it is every time you reboot, the system checks for any corruption, and if detected, it will automatically restore from this backup. So if it were to ever happen, you probably wouldn't ever even notice it!
Install the Terminal Emulator from the play store. Open and enter this:
su
reboot nvbackup
Thats it! Device will reboot and create your backup. This should prevent you from ever suffering from a lost IMEI!
david12795 said:
Weird, I went straight to update phone and it said my phone is up to date? I thought the official 4.4 update came out for the S3?
Click to expand...
Click to collapse
That has been released, but OTA's are generally rolled out in stages over several weeks. Usually done by region. So it msy not have started in your area just yet.
Two alternatives you can try though, install kies on your computer and update through that. Or there are a couple if threads in the General section that provide the ota for download.
Enewman17 has a few threads helping folks to update so I recommend checking them out as well.
Ive heard that some people have gone to best buy and they were able to initiate the update there. I dont know much more about this though.
DocHoliday77 said:
Awesome!
really glad to hear that! The only thing I can think of thst you might want to do next is backing up your nv data. The following is a copy/past from a post I made a few min ago... root is required to fo this btw, just so you know.
(Since you are looking to update though, I recommend waiting till you have updated before rooting and running this backup)
It's a super simple procedure and will create an on device backup of your nv data. The backup will be stored on a couple of partitions we never touch, not even with firmware flashes. This essentially makes it a permanent backup. The cool thing about it is every time you reboot, the system checks for any corruption, and if detected, it will automatically restore from this backup. So if it were to ever happen, you probably wouldn't ever even notice it!
Install the Terminal Emulator from the play store. Open and enter this:
su
reboot nvbackup
Thats it! Device will reboot and create your backup. This should prevent you from ever suffering from a lost IMEI!
Click to expand...
Click to collapse
Thank you! I will look into this. I just figured for some reason...I would have some data left from cyanogenmod, if that makes sense. In other words, i want my phone to be as fresh as possible. I only ask this because when I had CM, i accidentally made a backup of it through rom manager (or clockwork) and I am not sure if its in my partition somewhere.
That has been released, but OTA's are generally rolled out in stages over several weeks. Usually done by region. So it msy not have started in your area just yet.
Two alternatives you can try though, install kies on your computer and update through that. Or there are a couple if threads in the General section that provide the ota for download.
Enewman17 has a few threads helping folks to update so I recommend checking them out as well.
Ive heard that some people have gone to best buy and they were able to initiate the update there. I dont know much more about this though.
Click to expand...
Click to collapse
TIL that OTA arent as fast. Ill download KIES and give it a try.
Just installed KIES and it said my phone has the latest firmware?
david12795 said:
Thank you! I will look into this. I just figured for some reason...I would have some data left from cyanogenmod, if that makes sense. In other words, i want my phone to be as fresh as possible. I only ask this because when I had CM, i accidentally made a backup of it through rom manager (or clockwork) and I am not sure if its in my partition somewhere.
TIL that OTA arent as fast. Ill download KIES and give it a try.
Click to expand...
Click to collapse
Factory resetting with stock recovery installed wipes all data except the external sdcard. I am so sorry I should've mentioned this before. I was thinking you had already done one at some point and didn't have anything left to worry about. Still, I should have asked and I do apologize for that. Hopefully if it was really important it was saved to the external sdcard....
david12795 said:
Just installed KIES and it said my phone has the latest firmware?
Click to expand...
Click to collapse
Ok, I wasn't sure about that. I personally never need or use kies so I didn't know if it was tied to the staged rollouts. It would appear that it is though.
Give me a few min and ill post links to the threads where you can download the ota or update via a different method.
---------- Post added at 03:56 AM ---------- Previous post was at 03:40 AM ----------
UCUEMJB to UCUFNE4 firmware update - thread by enewman17
http://forum.xda-developers.com/showthread.php?t=2808654.
How to update SGH-I747 yo UCUFNE4_4.4.2 - thread by enewman17
http://forum.xda-developers.com/showthread.php?t=2789917
[Download] AT&T Kitkat OTA file - thread by bkong
http://forum.xda-developers.com/showthread.php?t=2788012
I suggest trying the third one by bkong first. He posted a pure OTA file you can try to update with.
The first option is a recovery flashable firmware, but does not include the /system (ROM) portion. To fully update using this you'll flash the firmware per his instructions and then go to his development thread for the stock rom. It is here: http://forum.xda-developers.com/showthread.php?t=2788357
The second option is the OTA file, but it has been slightly modified to skip certain file checks. If the original OTA doesnt work, theres a good chance this will. (Since you are full stock now either one should flash without issue).
Hope those help! I recommend doing a bit of reading about each one (at least the OP and last few pages) and start with whichever you are most comfortable with.
Or, you could always use that most valuable tool, patience, and wait for the OTA to roll out for your area.
Good luck!
DocHoliday77 said:
Factory resetting with stock recovery installed wipes all data except the external sdcard. I am so sorry I should've mentioned this before. I was thinking you had already done one at some point and didn't have anything left to worry about. Still, I should have asked and I do apologize for that. Hopefully if it was really important it was saved to the external sdcard....
Ok, I wasn't sure about that. I personally never need or use kies so I didn't know if it was tied to the staged rollouts. It would appear that it is though.
Give me a few min and ill post links to the threads where you can download the ota or update via a different method.
---------- Post added at 03:56 AM ---------- Previous post was at 03:40 AM ----------
UCUEMJB to UCUFNE4 firmware update - thread by enewman17
http://forum.xda-developers.com/showthread.php?t=2808654.
How to update SGH-I747 yo UCUFNE4_4.4.2 - thread by enewman17
http://forum.xda-developers.com/showthread.php?t=2789917
[Download] AT&T Kitkat OTA file - thread by bkong
http://forum.xda-developers.com/showthread.php?t=2788012
I suggest trying the third one by bkong first. He posted a pure OTA file you can try to update with.
The first option is a recovery flashable firmware, but does not include the /system (ROM) portion. To fully update using this you'll flash the firmware per his instructions and then go to his development thread for the stock rom. It is here: http://forum.xda-developers.com/showthread.php?t=2788357
The second option is the OTA file, but it has been slightly modified to skip certain file checks. If the original OTA doesnt work, theres a good chance this will. (Since you are full stock now either one should flash without issue).
Hope those help! I recommend doing a bit of reading about each one (at least the OP and last few pages) and start with whichever you are most comfortable with.
Or, you could always use that most valuable tool, patience, and wait for the OTA to roll out for your area.
Good luck!
Click to expand...
Click to collapse
No no! Its fine, I wasnt planning using it or anything, I just wanted to get rid of it since I have no use for it, no need to apologize. , I was fully aware that I would lose all files, other than SD ext drive. I just wanted to make sure that all files are in the right place and none of the unnecessary files are taking up space (e.g. files from cyanogenmod)
As for the update, I talked to a samsung representative and they said one can go to Best Buy and get it updated there through a technician, so Ill try that later since I am close to it ATM. If it back fires, Ill try your suggestions.
I really do appreciate for the help , I have been completely lost for days but it turns out I was just using the wrong firmware. Thanks for pointing it out. Good karma is coming your way . Hopefully one day, I will be here again and trying out a new custom firmware.
Glad I could help!
If I remember right, someone who mentioned the best buy thing had said at the time that the first store they went to did not have the update yet. But I think they found another in their area did. So if they say its up to date and cant help, you might find another store close by can. (If there is one of course!)
Just fyi so you're not too surprised if that happens.
DocHoliday77 said:
Glad I could help!
If I remember right, someone who mentioned the best buy thing had said at the time that the first store they went to did not have the update yet. But I think they found another in their area did. So if they say its up to date and cant help, you might find another store close by can. (If there is one of course!)
Just fyi so you're not too surprised if that happens.
Click to expand...
Click to collapse
Ill hope for the best and prepare for the worst.
Of course, if the worst happens, I can just use one of your links you mentioned. :good::good:

[Q] Help downgrading my device to kk

I've been reading the forums searching for help downgrading from Lollipop to Kitkat, but I haven't found much. A few threads say that there's some other thread with all the information, but I haven't been able to find it. Any information you can give me would be helpful: things I'll need, steps to take, link to a tutorial, etc.
Thanks!
http://forum.xda-developers.com/showthread.php?p=60908189
swatty43 said:
http://forum.xda-developers.com/showthread.php?p=60908189
Click to expand...
Click to collapse
Wonderful. thank you!
http://forum.xda-developers.com/showthread.php?t=3063452
Post #1 for 4.4.4 file
Do not alter, rename or do anything different with this file.
http://androidhost.org/PVAIv
Download Odin 3.09
http://forum.xda-developers.com/showthread.php?t=2998294
Download Debloater program to block bloatware and OTA. Use this after downgrading back to 4.4.4. Follow directions on that thread.
http://forum.xda-developers.com/showthread.php?t=3107391
Post #23 for directions to downgrade, then use Debloater program. I listed which apk to block OTA.
slimeshady said:
I've been reading the forums searching for help downgrading from Lollipop to Kitkat, but I haven't found much. A few threads say that there's some other thread with all the information, but I haven't been able to find it. Any information you can give me would be helpful: things I'll need, steps to take, link to a tutorial, etc.
Thanks!
Click to expand...
Click to collapse
there are some things i can't fully access from my work computer but i`ll try to help the best i can until someone else pitches in
first thing i recommend doing is setting usb debugging on your phone, you can google how to do that if you haven't already
second is to install your phone drivers on your PC (for me it's typically just plugging in my phone and letting it install)
third download the stock at&t note 4 kitkat firmware which can be found here. just click the link until you find the download option (can't access this further), i've used it to downgrade a couple weeks ago.. if the file is a .rar/.zip/.7zip unzip it, if its a .tar or .md5 you are good to go.
fourth download "odin" you can do a google search for it, i used odin 3.09 and 3.10, generally 3.09 is recommended. odin is what you will use to push firmwares on galaxy devices (and some others)
fifth once all of the above is done, open odin as admin w/ your phone connected to your PC already and you should see a "COM" port thats visible, that means your device is recognized. click the "AP" spot and find the .tar or .md5, once that is done click start and do not mess with any other
options - if you still feel uncomfortable do a google search for a youtube video on downgrading
also downgrading will remove anything on your phone excluding your micro SD card
warning: i know there is another link someone here that has more steps in odin for doing a downgrade so i apologize if the link is that one.. also, once you downgrade your phone will start the OTA back to lollipop at some point, i advise you learn how to freeze the update if you don't know already, myself personally i used greenify but there are other options
lastly, there is a thread with the stock lollipop update you can push to your device using odin as well, if you want to upgrade again & not take the OTA to do so.. hope this helps somewhat and good luck!
You could always take a quick trip to att device service and they will downgrade it for u or even best buy too if your scared to do it manually via odin.

Categories

Resources