Related
Hi everyone,
I was wondering, is there such thing as a stock gingerbread rom for the g2, or as close to stock as it can be? I know CM7 is almost out and its based on 2.3 but I was hoping for something as stripped down as a nexus S if such thing exists?
Deodeoxed version of stock froyo. Themed over some gingerbread. That is as stock as you can get.
Sent from my HTC Vision using XDA App
Vandale said:
Deodeoxed version of stock froyo. Themed over some gingerbread. That is as stock as you can get.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I'd disagree completely. CM7 with a stock launcher flashed over it is as close you can get to stock 2.3 simply right now. Skinned 2.2 is pretty far away from stock 2.3...
Just flash the latest CM7 nightly (at #5 almost #6 now). Or if you're worried just go with RC1, although all the nightlies after RC1 came out have been just fine for me so far. If you wanna get rid of ADW Launcher for the "stock" feeling, flash the stock Gingerbread launcher after you install CM7. Been doing this for about 10 nightlies now and it works like a charm and looks amazing as well. This is a really fast ROM, and it looks just like stock 2.3 on the NS does, but with all the CM7 goodies baked in if you want them.
I used the "CM7StockLauncherOnly.zip" from THIS thread. Its from the Nexus S community forum but it works just fine on G2. All this does is uninstall ADW and install the stock 2.3 launcher. I've gone ahead and attached the .zip that I've been using to this post for convenience . Just flash through recovery after doing a boot up with CM7.
Also, if you're going to be updating your nightlies of CM7. I can give you some advice. While in recovery, after flashing a newer version of CM7 (aka nightly #5 to #6, etc.), just go to advanced > Reboot Recovery, THEN flash the CM7LauncherMod.zip. Don't flash the new CM7, boot, then go back and flash the launcher mod. This way you will save all of your homescreen locations, widgets etc. If you let your phone boot with ADW installed it will wipe it clean when you install the stock 2.3 launcher and you'll have to start over. If you do this I can explain more in detail but thought I'd give you the headsup now.
martonikaj said:
I'd disagree completely. CM7 with a stock launcher flashed over it is as close you can get to stock 2.3 simply right now. Skinned 2.2 is pretty far away from stock 2.3...
Just flash the latest CM7 nightly (at #5 almost #6 now). Or if you're worried just go with RC1, although all the nightlies after RC1 came out have been just fine for me so far. If you wanna get rid of ADW Launcher for the "stock" feeling, flash the stock Gingerbread launcher after you install CM7. Been doing this for about 10 nightlies now and it works like a charm and looks amazing as well. This is a really fast ROM, and it looks just like stock 2.3 on the NS does, but with all the CM7 goodies baked in if you want them.
I used the "CM7StockLauncherOnly.zip" from THIS thread. Its from the Nexus S community forum but it works just fine on G2. All this does is uninstall ADW and install the stock 2.3 launcher. I've gone ahead and attached the .zip that I've been using to this post for convenience . Just flash through recovery after doing a boot up with CM7.
Also, if you're going to be updating your nightlies of CM7. I can give you some advice. While in recovery, after flashing a newer version of CM7 (aka nightly #5 to #6, etc.), just go to advanced > Reboot Recovery, THEN flash the CM7LauncherMod.zip. Don't flash the new CM7, boot, then go back and flash the launcher mod. This way you will save all of your homescreen locations, widgets etc. If you let your phone boot with ADW installed it will wipe it clean when you install the stock 2.3 launcher and you'll have to start over. If you do this I can explain more in detail but thought I'd give you the headsup now.
Click to expand...
Click to collapse
Hmm... thanks lol I will try this when I flash cyan
Sent from my HTC Vision using XDA App
lainvalenajr said:
Hmm... thanks lol I will try this when I flash cyan
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I can't stress how much more I love CM7 with the stock launcher lol. I was kinda luke-warm on CM7 at first because its just got a little lag with ADW, but now its buttery smooth. Let me know if you need any help I'd be glad to run you through it.
thanks a lot for the insight, i'll prbbly work my way to cm7 once it becomes final
arts711 said:
thanks a lot for the insight, i'll prbbly work my way to cm7 once it becomes final
Click to expand...
Click to collapse
Awesome. Hope you make the move its a great ROM.
FWIW, CM7 has been extremely stable for me. Never had a crash, reboot, force close, or anything since build #30 when I started. I think a lot of people are in the same boat. I really don't think theres many instable issues this has been a daily driver for a lot of people for many weeks now, even before the RC1 came out.
If you find instability you can always go back to the nandroid backup of your stock 2.2, but I don't think it would hurt to try it out and see how you like it! Just remember to update to the latest CWM Recovery 3.0.0.5 from ROM manager, it handles both 2.2 and 2.3 backups/restores.
martonikaj said:
I'd disagree completely. CM7 with a stock launcher flashed over it is as close you can get to stock 2.3 simply right now. Skinned 2.2 is pretty far away from stock 2.3...
Just flash the latest CM7 nightly (at #5 almost #6 now). Or if you're worried just go with RC1, although all the nightlies after RC1 came out have been just fine for me so far. If you wanna get rid of ADW Launcher for the "stock" feeling, flash the stock Gingerbread launcher after you install CM7. Been doing this for about 10 nightlies now and it works like a charm and looks amazing as well. This is a really fast ROM, and it looks just like stock 2.3 on the NS does, but with all the CM7 goodies baked in if you want them.
I used the "CM7StockLauncherOnly.zip" from THIS thread. Its from the Nexus S community forum but it works just fine on G2. All this does is uninstall ADW and install the stock 2.3 launcher. I've gone ahead and attached the .zip that I've been using to this post for convenience . Just flash through recovery after doing a boot up with CM7.
Also, if you're going to be updating your nightlies of CM7. I can give you some advice. While in recovery, after flashing a newer version of CM7 (aka nightly #5 to #6, etc.), just go to advanced > Reboot Recovery, THEN flash the CM7LauncherMod.zip. Don't flash the new CM7, boot, then go back and flash the launcher mod. This way you will save all of your homescreen locations, widgets etc. If you let your phone boot with ADW installed it will wipe it clean when you install the stock 2.3 launcher and you'll have to start over. If you do this I can explain more in detail but thought I'd give you the headsup now.
Click to expand...
Click to collapse
im still new to this...i just flashed rc1 this morning, been playing with it all day. can i flash this stock launcher now with no issues? should i have flashed both one after the other?
spudkinks said:
im still new to this...i just flashed rc1 this morning, been playing with it all day. can i flash this stock launcher now with no issues? should i have flashed both one after the other?
Click to expand...
Click to collapse
Nope you can flash it any time you want. Just go into recovery (hold down power button, select "reboot" then select "recovery", and wipe cache to be safe. Then go to "install zip from SD card" > "Choose zip" then select it and hit YES, just like you would for any other zip.
Remember, this will completely uninstall ADW. You will probably lose all of your icon/widget locations, although the 1st initial time I flashed the stock launcher I didn't lose my locations completely (everything shifted over by 1 homescreen weirdly). I'd most definitely run a nandroid backup before you flash anything (this should be normal practice anyways).
The reason why I instructed to flash the ROM, then restart recovery then flash the Stock Launcher Mod without a boot up is that when you're using the stock launcher over and over, installing ADW will wipe your homescreen locales.
Thanks very much. Just installed with no issues/lost widgets or icons. This is WAY better.
Sent from my HTC Vision using Tapatalk
spudkinks said:
Thanks very much. Just installed with no issues/lost widgets or icons. This is WAY better.
Sent from my HTC Vision using Tapatalk
Click to expand...
Click to collapse
Glad it worked for you. Like I said I've been using this for about 10 nightlies now and its the best 2.3 experience I've ever had.
Feel free to send me a PM if you have any questions or troubles.
Quick question for the people in the know, I'm running RC1 with the stock launcher & loving it, but I would like to upgrade to the latest nightly.
So if I flash the latest nightly (With no wiping) then before booting into the OS I flash this zip it will be just upgrading the OS & won't touch any of my screen setups?
Delivered by Western Union in the rain after 70 Years
KarlosTheJackal said:
Quick question for the people in the know, I'm running RC1 with the stock launcher & loving it, but I would like to upgrade to the latest nightly.
So if I flash the latest nightly (With no wiping) then before booting into the OS I flash this zip it will be just upgrading the OS & won't touch any of my screen setups?
Delivered by Western Union in the rain after 70 Years
Click to expand...
Click to collapse
Yes. If you follow my instructions from the first page properly. Otherwise you'll either not flash the launcher properly, or you'll flash it and lose your home screen setups.
Before starting. Do a Nandroid backup. Always a good idea! That being said, follow these instructions:
1) Go into recovery (Power Button > Reboot > Recovery), wipe cache, wipe dalvik cache (doesn't hurt, takes 10sec)
2) Flash the new nightly build you're upgrading to (Install Zip from SD card > Select Zip > select the latest nightly you're upgrading to.
2a) DO NOT REBOOT SYSTEM
3) Still in recovery, go to Advanced > Reboot Recovery
4) After recovery reboots, go ahead and flash zip from SD card > Select Zip > Flash the stock launcher mod.
Let me know if you have any questions. The crucial part is rebooting recovery after flashing the nightly and before flashing the launcher mod, this way ADW is installed and you can properly uninstall it and replace it with the stock launcher. Also, make sure you don't accidentally boot up the ROM before flashing the stock launcher, as it will wipe your homes because it installed ADW.
Just realised i never said thanks for this! *Slaps head*
So Thanks (Y)
KarlosTheJackal said:
Just realised i never said thanks for this! *Slaps head*
So Thanks (Y)
Click to expand...
Click to collapse
Very welcome, everything work out upgrading and applying stock launcher?
martonikaj said:
Very welcome, everything work out upgrading and applying stock launcher?
Click to expand...
Click to collapse
Yes thank you! Running the latest Nightly with the stock launcher & didn't lose a single widget! XD
Delivered by Western Union in the rain after 70 Years
Hey guys i finally got a working dinc (apparently they lied about letting me get a different handset because htc has never reported random reboots as an issue), and rooted and dropped jagerrom on it just to try it. and I dont like it, at all. So i wanna go back to senseless rEVOlution, but no matter what i try it just wont flash. I've tried changing roms and going from there, doing it through rom manager, doing it through recovery, even un/re-rooting and everything. I just want a rom that i like so tired of phone problems zzz
What do you mean it won't flash? Are you getting an error message? Is the install going through but it does nothing? Can you be a bit more specific?
Ummm if I try it straight through recovery it just says install can not be completed and another line, I'd have to try it to check. If I go through rom manager the install seems to go fine but then it boots back into jager ROM
Sent from my ADR6300 using XDA App
What version of the recovery do you have?
3.0.0.5 fasdfasdfaf
xmilkmanx said:
3.0.0.5 fasdfasdfaf
Click to expand...
Click to collapse
Go back to 2.5.1.2. 3.0.0.5 had a bunch of issues/problems. This is probably one of the reasons that nothing is happening after you flash it. Revert to 2.5.1.2, wipe, then flash the rom you want. Everything should be good after that.
Then if you want, you can upgrade it to 3.0.0.8, I haven't heard of any problems with that one.
kk sweet ill do that.
PS does battery level matter when flashing stuff? a friend told me that if u flash on anything besides full it'll mess with your battery life
xmilkmanx said:
kk sweet ill do that.
PS does battery level matter when flashing stuff? a friend told me that if u flash on anything besides full it'll mess with your battery life
Click to expand...
Click to collapse
No, it doesn't matter, just don't do it when the battery level is low. You don't want the phone to power off in the middle of flashing a rom, that makes your phone a nice paperweight.
ah okay sweet. apparently something about senseless revolution wont let me flash with 3.X.X.X recovery. said something about a script not being compatible with gingerbread recoveries.
and apparently apply sdcard/update.zip didnt flash the new recovery, hmm. oh well ill figure it out.
are there any ACTUAL gingerbread roms for the dINC and not just themeed ones? all the ones I see say GB but then in the topic it just is like "Themed gingerbread whatever"
xmilkmanx said:
ah okay sweet. apparently something about senseless revolution wont let me flash with 3.X.X.X recovery. said something about a script not being compatible with gingerbread recoveries.
and apparently apply sdcard/update.zip didnt flash the new recovery, hmm. oh well ill figure it out.
are there any ACTUAL gingerbread roms for the dINC and not just themeed ones? all the ones I see say GB but then in the topic it just is like "Themed gingerbread whatever"
Click to expand...
Click to collapse
Just reflash the recovery through rom manager. Just scroll to the bottom, All ClockworkMod Recoveries, and pick 2.5.1.2.
For GB CM7 is basically a stock GB rom with a bunch of customizations that you can choose to make. Its the most stable GB rom right now IMO.
The lowest it has is 3.0.0.2 and doesnt let me scroll
xmilkmanx said:
The lowest it has is 3.0.0.2 and doesnt let me scroll
Click to expand...
Click to collapse
Just go here ( http://dougpiston.com/?page_id=85 ) and download the 2.5.1.2 recovery. Be sure to check that your MD5 sum is the same as the one provided before flashing.
Sent from my Droid Incredible running Myn's Warm TwoPointTwo RLS5.3.
Blah12543 said:
Just go here ( http://dougpiston.com/?page_id=85 ) and download the 2.5.1.2 recovery. Be sure to check that your MD5 sum is the same as the one provided before flashing.
Sent from my Droid Incredible running Myn's Warm TwoPointTwo RLS5.3.
Click to expand...
Click to collapse
Thanks for the link, I've been looking for that recovery.
i cannot load any 2.3 rom on my evo none, only froyo an ideas
Did you fully wipe before you flash
sent from my HTC evolution running a freshly baked gingerbread with the 4gs in it
foresure84 said:
i cannot load any 2.3 rom on my evo none, only froyo an ideas
Click to expand...
Click to collapse
Its either your recovery, not wiping correctly, or bad downloads.
neither, i can load any froyo rom, just not 2.3
what do you think
teh roxxorz said:
Its either your recovery, not wiping correctly, or bad downloads.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1277431
foresure84 said:
http://forum.xda-developers.com/showthread.php?t=1277431
Click to expand...
Click to collapse
No, because its for the 3D. Another user tried flashing it and it just doesn't flash; luckily it didn't brick his phone.
teh roxxorz said:
No, because its for the 3D. Another user tried flashing it and it just doesn't flash; luckily it didn't brick his phone.
Click to expand...
Click to collapse
thnks i'm stumped
foresure84 said:
thnks i'm stumped
Click to expand...
Click to collapse
What he's saying is that the ROM you linked to is for the EVO 3D, not the regular EVO. Make sure that you are attempting to flash an EVO ROM and if you still have problems then please post a description of exactly what happens when you try to flash a gb ROM.
Sent from my PC36100 using XDA App
every time, i try to load a 2.3 rom, it just bootloops at the slash screen, i've done many, phones, prior to this, so i'm familiar with most of the does and don'ts (this is my tester phone), my daily evo i had no problems updating to GB
i cant load any GB roms on this evo....( it's my testing evo) strange they all do the same thing just keep rebooting on the splash screen this evo is hardware 003, the last rom on this is
android 2.21
baseband 2.15.00.09.1
kernel is 2.6.32.24- kings-havs ocUv
build bumber
caulkins evio 2 rom v1.5
software number
3.30.651.2
pri 1.77-003
prl version
60662
foresure84 said:
i cant load any GB roms on this evo....( it's my testing evo) strange they all do the same thing just keep rebooting on the splash screen this evo is hardware 003, the last rom on this is....2
Click to expand...
Click to collapse
What recovery are you using? I would suggest you install AmonRa 2.3, if you are already using it reinstall it from a fresh download. Next wipe everything except your SD, wipe system, wipe boot, sdext, ect...
dafunk60 said:
What recovery are you using? I would suggest you install AmonRa 2.3, if you are already using it reinstall it from a fresh download. Next wipe everything except your SD, wipe system, wipe boot, sdext, ect...
Click to expand...
Click to collapse
every time, i try to load a 2.3 rom, it just bootloops at the slash screen, i've done many, phones, prior to this, so i'm familiar with most of the does and don'ts (this is my tester phone), my daily evo i had no problems updating to GB
foresure84 said:
every time, i try to load a 2.3 rom, it just bootloops at the slash screen, i've done many, phones, prior to this, so i'm familiar with most of the does and don'ts (this is my tester phone), my daily evo i had no problems updating to GB
Click to expand...
Click to collapse
I wasn't trying to insult your intelligence and I understand the issue you are trying to resolve. If I recall correctly it is caused by the boot partition not being wiped. This does not cause an issue when switching from 2.2 rom to 2.2 rom because kernels are specific to the version of android (and sometimes other system elements such as sense / asop). And again, if I recall correctly, the "wipe all" command on many older recoveries did not wipe the boot partition, or wipe it completely so when you go to boot your 2.3 system with a 2.2 kernel it doesn't work and you get a boot loop. Hence my question & suggestion. Best of luck finding a fix.
please update your radio to one of the ones that came with gingerbread and try again..remember the safer way to update radios is through bootloader and not recovery...and remember the phone will reboot during the update, do not touch the phone until it reboots a second time or you may brick it..
Okay here is what I did to get GB, on my (evo tester phone)
1) booted the evo into recovery
2) factory reset 2x
3) ran VR_SUPERWIPE 2x
4) then I ran, SNS SUPER WIPE 2x, still could not run 2.3 GB at all!!, trying all kind of things for a little over a week.
5) Went through my files, found an old RUU. (RUU_SuperSonic_S_Sprint_WWE_3.26.651.6_Radio_2.15.00.07.28_NV_1.71_003_release_147044_signed) THIS IS THE ON YOU HAVE TO PLUG THE EVO INTO THE COMPUTER TO RUN.
6) Booted the evo into bootloader, then ran the RUU.
7) REBOOTED PHONE,… okay looks like stock,
8) Rebooted to bootloader s-off, is now s-on…. Dayum
9) I said F**K IT… repeated steps 1-3, then ran (deo_4.54.651.1)
10) This is the same rom I tried to install all week, now it install, verified, the version, guess what. 2.3.3.. wtf
11) I then installed, GW (signed_Team-Nocturnal_Stock_RLS.02).. (it also restored my custom splash screen)
12) IT INSTALLED NO PROBLEM… WTF…
13) STILL WITH SUPER USER PRIVIELGES
14) How is this possible with s-on
Like ca1ne said. I am 99% sure your issue is outdated radios. Update those then flash a gingerbread Rom, preferably one based on the ota 4.54.
tapatalk signature here. lovely.
tommytomatoe said:
Like ca1ne said. I am 99% sure your issue is outdated radios. Update those then flash a gingerbread Rom, preferably one based on the ota 4.54.
tapatalk signature here. lovely.
Click to expand...
Click to collapse
tried that previously, also did you read the post above?
OK I have accomplished s-off and rooted the phone and installed Clockwork but for some reason I cannot flash the CM7 Port that alquez has provided us with? Here is what I get when I try to flash it. Take note I have flashed roms to the phone and they worked but this one will not and it's the one I want.
Bcoz your using an old recovery. Download the latest on in development section. Its thread is CWM.
ScottPomroy said:
OK I have accomplished s-off and rooted the phone and installed Clockwork but for some reason I cannot flash the CM7 Port that alquez has provided us with? Here is what I get when I try to flash it. Take note I have flashed roms to the phone and they worked but this one will not and it's the one I want.
Click to expand...
Click to collapse
Like jikantaru said, you have an old recovery version, get this one in this thread, http://forum.xda-developers.com/showthread.php?t=1213229
That is the one that I had downloaded.
Noooooooooooooooooooooooooooooo!! Yes yet another problem. Got the recent version of clockwork and it worked until I rebooted. Now it's hanging on the white HTC bootscreen!!!!! Noooooooooooooooooooooooooooooo!!
ScottPomroy said:
Noooooooooooooooooooooooooooooo!! Yes yet another problem. Got the recent version of clockwork and it worked until I rebooted. Now it's hanging on the white HTC bootscreen!!!!! Noooooooooooooooooooooooooooooo!!
Click to expand...
Click to collapse
White bootscreen? That's not good.. if it was CM7 hanging, you just boot into recovery again, wipe cache partition, then goto Advanced and clear davlik cache, then reboot.
Trying it again now!!!
And still nothing!!!!! I'm continuing this here: http://forum.xda-developers.com/showthread.php?p=19323182#post19323182
I had something like this. Install the clockwork based recovery from XDA.
Sent from my HTC Wildfire S running cm7 with overclocked 806 cpu and data2whatever using XDA App
I've been trying to flash CM 7.2.0 and every time I do it, it either A) freezes on the kernel or B) freezes on the boot animation. My bootloader is unlocked. Here are the steps that I've tried.
1. Flash R800x_3.0.1.E.0.88_Verizon.ftf
2. Activated phone, wifi, and whatnot. Play around with it for a few minutes.
3. Flashed the kernel that came with FXP CM7.2.0 zeusc.
4. Boot up into recovery. Wipe user data, cache, dalvik cache.
5. Flash CM7.2.0 zeusc zip.
6. Reboot and the boot animation freezes. I've waited up to 30 minutes and no change. Pulled the battery out, turned on, still freezes on boot animation.
I've done the same thing with R800x_4.0.2.E.57_Verizon.ftf and still no luck. Any ideas?
game_guy said:
I've been trying to flash CM 7.2.0 and every time I do it, it either A) freezes on the kernel or B) freezes on the boot animation. My bootloader is unlocked. Here are the steps that I've tried.
1. Flash R800x_3.0.1.E.0.88_Verizon.ftf
2. Activated phone, wifi, and whatnot. Play around with it for a few minutes.
3. Flashed the kernel that came with FXP CM7.2.0 zeusc.
4. Boot up into recovery. Wipe user data, cache, dalvik cache.
5. Flash CM7.2.0 zeusc zip.
6. Reboot and the boot animation freezes. I've waited up to 30 minutes and no change. Pulled the battery out, turned on, still freezes on boot animation.
I've done the same thing with R800x_4.0.2.E.57_Verizon.ftf and still no luck. Any ideas?
Click to expand...
Click to collapse
have you ever flashed a rom and kernel before? also are you till in stock rom?
x1rocket said:
have you ever flashed a rom and kernel before? also are you till in stock rom?
Click to expand...
Click to collapse
Yes I've flashed a ROM before. Following these same steps, I was able to boot CM9. I've also managed to get AokPlay, Paranoid Android and a few other ROMs running on my device. I always flash back to stock before attempting to flash a new ROM.
game_guy said:
Yes I've flashed a ROM before. Following these same steps, I was able to boot CM9. I've also managed to get AokPlay, Paranoid Android and a few other ROMs running on my device. I always flash back to stock before attempting to flash a new ROM.
Click to expand...
Click to collapse
on the thread you have downloaded the file are the users facing the same problems or just you? must be not supported by your model or the compiled file was not a success to let you boot... if you do check, make sure you read all the pages on that thread...
x1rocket said:
on the thread you have downloaded the file are the users facing the same problems or just you? must be not supported by your model or the compiled file was not a success to let you boot... if you do check, make sure you read all the pages on that thread...
Click to expand...
Click to collapse
It's definitely compatible with my device, it even says it is. I read through the thread and it looks like one or two people are having the same issues.
game_guy said:
It's definitely compatible with my device, it even says it is. I read through the thread and it looks like one or two people are having the same issues.
Click to expand...
Click to collapse
wait a couple of days and see if those users have a fix for it... as no one else posted on this thread they wouldn't know the problem the same as I don't know...
at least I tried to help
game_guy said:
I've been trying to flash CM 7.2.0 and every time I do it, it either A) freezes on the kernel or B) freezes on the boot animation. My bootloader is unlocked. Here are the steps that I've tried.
1. Flash R800x_3.0.1.E.0.88_Verizon.ftf
2. Activated phone, wifi, and whatnot. Play around with it for a few minutes.
3. Flashed the kernel that came with FXP CM7.2.0 zeusc.
4. Boot up into recovery. Wipe user data, cache, dalvik cache.
5. Flash CM7.2.0 zeusc zip.
6. Reboot and the boot animation freezes. I've waited up to 30 minutes and no change. Pulled the battery out, turned on, still freezes on boot animation.
I've done the same thing with R800x_4.0.2.E.57_Verizon.ftf and still no luck. Any ideas?
Click to expand...
Click to collapse
If you are still having trouble flashing CM7, I would suggest downloading from zeusc section of http://get.cm
Or, you can try one of the many CDMA optimized ICS/JB ROMs.
You may have to wipe everything a few times. Of course you can always use my modified cm7 which has autorotation unlike any other cm7 for zeusc lol
Leraeniesh said:
If you are still having trouble flashing CM7, I would suggest downloading from zeusc section of get.cm
Or, you can try one of the many CDMA optimized ICS/JB ROMs.
Click to expand...
Click to collapse
I might switch back to CM9 or Paranoid. I've tried the JB ports. One has working data but no sound, and the other CDMA has everything working except I couldn't get data to work.Thanks for that URL, which one would you recommend? RC1, 2, 3 or stable?
agraceful said:
You may have to wipe everything a few times. Of course you can always use my modified cm7 which has autorotation unlike any other cm7 for zeusc lol
Click to expand...
Click to collapse
If the get.cm doesn't work either, I'll go ahead and try the one in your signature. If all else fails, I'll probably go back to CM9 or Paranoid.
Thanks for all of the help you guys, this is a pretty nice community. :3
Sorry to double post, but I tried the ones from get.cm and the modified one from agraceful, but both froze on the boot animation then crashed and froze on the kernel. I think I'm just gonna give up on this particular ROM.
Check what kind of kernel you using.
I had simillar problem whed used kernel from XDA downloaded file. When used from file downloaded from CM project site it runs with no problems.
I have no idea why that happen, maybe on XDA forum is different modificated version for 800x or 800i etc. and not working with all phones.