Hi All,
I put the HTC DHD ROM onto my device but now want to change back to the T-Mobile ROM.
I try to run the ROM in bootloader but i just get device with red triangle and !.
Here is what i did to get the HTC ROM to my device
http://forum.xda-developers.com/showthread.php?t=905003
Can someone please help me.
why don't you just flash a stock RUU? That uses your PC to flash your phone, not bootloader.
Related
I flashed my HTC Desire with O Desire. It didn't reboot and now it can't access the recovery. I partitioned my sd card before flashing .. but I forgot to put my files back .. so that may be the problem. Is my recovery messed up now ? How would I be able to fix this without going into recovery !
It's a Telus SLCD one. It goes into the bootloader fine, but it won't go into recovery . I've tried using unrevoked again to put another recovery but I realized that I can't activate USB debugging in the bootloader.
Please help, I'm a university student living away from home, and I have no way to contact my family!
I had a similar problem trying to install a custom rom on my telstra slcd desire, and buggered the OS and recovery. I was able to recover back to stock by going into fastboot on the phone then flashing an official RUU from HTC.
jayme said:
I had a similar problem trying to install a custom rom on my telstra slcd desire, and buggered the OS and recovery. I was able to recover back to stock by going into fastboot on the phone then flashing an official RUU from HTC.
Click to expand...
Click to collapse
Could you give me a step by step on how to do that?
Also would it matter which RUU I use ? I'm planning to try rooting it again anyway.
I'd hate to double post but I need to fix this problem ASAP. I have no way to contact my family because we only communicate through phone. Is there anyway to fix this problem ?
I also tried using an RUU but it failed, probably because I don't have a goldcard. But how can I make a goldcard without the phone ?!
Try running this official stock RUU that is compatible with SLCD Desires, link is here:
http://shipped-roms.com/shipped/Bra...1.00.32U_4.08.00.09_release_137222_signed.exe
I've tried this rom, it doesn't work :S. It's most likely because it's a Telus desire and I have no goldcard. Any suggestions? I'm really running out of ideas. :S
EDIT: Is it because my current version is 1.29.661.1 and the install shield is trying to "upgrade" it to 1.21.405.2 ?
Can you try the "reset device" option in either h-boot or fastboot. I've had a similar ordeal on a hero and that took care of it, I was able to boot back into recovery.
Sent from my HERO200 using XDA App
Hello!
I have a question.
Currently I have the phone Rooted and a custom Rom is installed. Now you have my phone for repair. I would like the phone back in the original condition (ie without root privileges and ClockworkMod menu) to bring.
I had then the original image, which I did for the root time, have re-played.
But unfortunately I get the menu ClockworkMod not go away.
The menu is still available.
Next try:
After I had been playing the original image, and I had started the cell phone was offered by T-Mobile is an update.
But unfortunately this update is not installed.
It aborts with an error message.
Now I have read that I should just flash the original RUU, Complete new. So I went to shipped rom on the side and I have the appropriate RUU for my phone charged. (RUU with the Tmobile UK).
But this I do not get installed.
The flash process is interrupted after a few minutes with the error 140 (wrong bootloader version).
Now my question:
How do I bekome out there, I have on my phone without the original T-Mobile software ClockworkMod, or do I uninstall ClockworkMod?)
Did any of you an idea?
Thank you!
Greeting Hollux
P.S.: Sorry for my bad English.....
Everything you need to know about putting your wildfire to original condition is in this post:
http://forum.xda-developers.com/showthread.php?t=1160251
Enjoy
dragdusan said:
Everything you need to know about putting your wildfire to original condition is in this post:
http://forum.xda-developers.com/showthread.php?t=1160251
Enjoy
Click to expand...
Click to collapse
Hello!
Thank you for the link, but my Handy is not S-off!
I'm at HBoot 0.80 and I have the Problem, that I can not flash the original RUU for my Wildfire....
I become an Error 140 Code (Bootloader error)...
Greets Hollux
what is your language?
is your phone branded?
you have breaked your recovery?
Maybe you have installed the bootloader driver from Unrevocked
Is yes,download and install htc syn from its official site and after the installation,unistall ONLY htc sync,not the drivers
my phone is unbranded and i used this
http://shipped-roms.com/download.ph...5.55.24H_3.35.20.10_release_160191_signed.exe
it will update your HBOOT to 1.01.00001 so you need s-off to flash recovery and custom rom
kylon said:
what is your language?
is your phone branded?
you have breaked your recovery?
Maybe you have installed the bootloader driver from Unrevocked
Is yes,download and install htc syn from its official site and after the installation,unistall ONLY htc sync,not the drivers
my phone is unbranded and i used this
http://shipped-roms.com/download.ph...5.55.24H_3.35.20.10_release_160191_signed.exe
it will update your HBOOT to 1.01.00001 so you need s-off to flash recovery and custom rom
Click to expand...
Click to collapse
Hello!
I have my phone with Rooted Unrevoked3.
Then a Custom Rom installed. (DK ROM).
Original is the phone branded by T-Mobile Germany. It was originally Froyo still on the phone.
HTC Sync I have installed and then uninstalled so I only have the drivers on my computer.
For flash process:
I've taken on shipped-rom RUU following:
RUU_Buzz_TMO_UK_1.14.110.1_Radio_13.45.55.24_3.35.15.19_release_130442_signed
If I'm in HBOOT USB plug mode, the mobile is an Android Phone - Android detected bootloader interface.
However, so after the start of the RUU, the phone is not detected!
If I'm in the fast boot mode, the USB phone as a USB device is Android - My HTC detected.
Even after you start the RUU detected the phone and I can start the flash process.
However, it comes out after a minute the error 140 (bootloader error).
If I install the image, which I then made by the original ROMs, will start after the one offered on Air update.
This, however, can not even install.
The flash process will start, but after a short time I see a picture in the phone with an Android males and a triangle. Then I am back in ClockworkMod menu ....
As I've written, I only want to install my phone with the original RUU from T-Mobile Germany and the menu should disappear ClockworkMod ...
Did any of you an idea?
What happens if I flash a non T-Mobile RUU ....?
I can try to flash another RUU and then later, my T-Mobile?
Please Answer, thank you
Greeting Hollux
You will have to downgrade MISC Partition, to allow "Downgrading" your ROM. (DK Custom ROM is based on 2.22.405.1, and you are trying to flash 1.10.114).
The Guide for AlphaRev X to Downgrade HBoot from 1.01.0002 to 1.01.0001 follows this same procedure, but, its for the WWE 2.22.405.1 ROM only.
But, you can follow this procedure, since you are on HBoot 0.80x
http://forum.xda-developers.com/showthread.php?t=905003
Obviously, the command version numbers will change in your case, and, you will need the TMO Rom.zip from that RUU.
NB - Disclaimer - It should work, but, it's a sensitive process, and I am not responsible for bricks.
Hi, I Have A HTC Buzz/Wildifire which is on cyaogenmod 7 i want to be able to go back to my phones original status and firmware i have downloaded the RUU Which is called RUU_Buzz_TMO_UK_1.14.110.1_Radio_13.45.55.24_3.35.15.19_release_130442_signed.exe
When I Launch It And Get To The part where i have to connect my phone i get an error 170 saying cant find phone. Please Help Thanks.
My Phone Is S-Off rooted and the Hboot version is 6.01.1002
Really Could You Some Help Thanks.
cobby911 said:
Hi, I Have A HTC Buzz/Wildifire which is on cyaogenmod 7 i want to be able to go back to my phones original status and firmware i have downloaded the RUU Which is called RUU_Buzz_TMO_UK_1.14.110.1_Radio_13.45.55.24_3.35.15.19_release_130442_signed.exe
When I Launch It And Get To The part where i have to connect my phone i get an error 170 saying cant find phone. Please Help Thanks.
My Phone Is S-Off rooted and the Hboot version is 6.01.1002
Really Could You Some Help Thanks.
Click to expand...
Click to collapse
are you trying to go completely back to stock s-on and all or do you just want the old htc sense back? if your trying to get it fully back to s-on the you could try boot into the bootloder and see if the ruu can pick it up from there.
if you just want the sense the you can just flash a htcsense zip file and you will be back at stock, still s-off with your custom recovery
connect your phone, then run RUU - ensure phone is in charge only mode
Trying to sell my phone, how do I quickly go back to stock, am running a custom rom at the moment please.? I have access to recovery everything is working fine, just need to return to stock please.
You need to relock bootloader and install RUU file from your computer.
There is step-by-step guide in Android development section of One X forum http://forum.xda-developers.com/showthread.php?t=1660807
I used the all-in-one toolkit to unlock my bootloader and installed the recovery i flashed a rom onto my htc one x when it finished flashing i unlocked the screen and i just saw htc in green over a white background for a long time i tried flashing another rom same thing happened after a while of browsing i noticed it stopped with the white htc screen and it let me do the 1st time setup now its stuck in airplane mode and i just want to get back to my stock rom :/ please help my cid is htc__102 i know its a german RUU. i have the exe for it(RUU_ENDEAVOR_U_ICS_40_HTC_Europe_1.29.401.11_Radio_1.1204.105.14_release_260491_signed) when i try to update to a lower version it sais the rom update utility cannot update your android phone please get teh correct rom update utility
When you have tried to flash a rom, did you flashed the boot.img?
If no, try and your custom rom works.
However, for the ruu, you need a ruu with JB; search here .