Related
Hi
My Qtek 9090 is stuck with a USB or SERIAL SCREEN... what can I do?
PLEASE HELP !
Hmmm
Commit Hara kiri?
almost
No really
HELPPPPPPPPPPPP
I got this device in Fr and wanted to witch to UK, since I cannot stand FR PPC
I tired several things founded here but I don't know where to really start neither what to take or not
What were you doing that got in this state? Pushing buttons, trying to update the ROM,...?
If you didn't do anything then try a hard reset (power and softreset button). If the doesn't work and you didn't do anything else then send it back to the place you ordered it from.
If you were trying to update a ROM it may be that you were connected to a USB hub and the update failed.
Well to be honest with you, I received for gift a Qtek 9090 it was given to me with a BT GPS, all was in French, and even if I am French I cannot stand French OS, translation are always horribly done.
So I DL a T-Mobile ROM, BUT I made the mistake to use en XDAII ROM, the Upgrade went well, I reboot the XDA III and I was in the USB/Serial Mode.
I know very well to hqndle such things on iPAQ, I often Swap Japanese to English ROM, but on the 9090 I really don t know how to do. I looked qround on the forum I tried severql stuff, but with no result. Lately I got the COUNTRY CODE error when I tired to restore the rom (I looked at the GERMAN to ENGLISH) thread.
So really I would love to fix this soon.
Once again HELP !
What happens when you do a hard reset (power button held while doing pushing 'reset' with the sylus (pen)?
I'm thinking that the only way your going to recover is by loading the image off of an SD card from the Bootloader window, I'm not sure how to this though.
Well it is indeed the only thing which cqn help me here, but tomorrow I am flying back to Tokyo and I will NEVER find a QTEK in Japan.
I could dump the empty or fake rom from my dead 9090 to an SD using tty, thanks to the cmd d2s and could just try to recover it with the SD, the process work fine but well uploading a fake or empty rom won t help.
I could also find on this forum FTP some ROM, but no way to upload them to my Qtek or even no solution to chqnge the Counrty ID stuff.
There is another way to solve this stuff is to use TTY with a lnb nk.nb0 like cmd from a modified ROM but once again no info on how to change the languqge ROM info.
The XDA ROM Tool stuff is nice well done but rely too much on ActiveSync. Before trying to chqnge my ROM I saved it using this soft but once your 9090 stuck to the SERIAL/USB Screen it become useless since it is using ActiveSync.
No one here got an idea ? How to solve this matter ???
:? so no hope ?
So I continue my little investigation... and feel so lonely anyway whatever I write for the language I got this
questions
why the D2S cmd work but not the S2D?
why lnb neither h nor ? is not allowed ?
could anyone help me out of a mess please , i have recently purchased an mda3 to replace my xda2 , i unlocked the phone which went ok but wouldnt accept my o2 sim , being the same phone as the xda2s i thought maybe it would need the o2 windows version rom on , i selected the wrong rom from my pc and the upgrade stopped after a few seconds stating it was the wrong version but now the phone has no rom on at all just a dark screen with "serial" or "usb" if it is docked . Have i done permanent damage ? any help would be very much appreciated
Your phone is currently in bootloader mode - if you have a valid ROM for your device you should be able to flash it with the phone in the USB cradle (the dark screen should change to USB).
If you don't have a valid ROM, go check out the wiki, there's plenty to choose from there!
many thanks forza , as u can prob guess im new at this !
sorry to be a pain forza but unsure which files on the ftp to use , doesnt have to be the latest rom i just need it to work again , could you also tell me how to execute the files , do they load from the desktop , many thanks bren the amatuer
This page on the wiki lists the available original ROM packages;
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
The T-Mobile UK one (1.42) is the latest version ROM (3rd on the list), so I'd recommend you start with that (it's the one I use).
[EDIT] just noticed you're showing as being on O2, further down the list (almost at the bottom of the first section) there's a UK O2 ROM - that may be better for you.
With the phone docked in the cradle (with USB showing on the screen), you can just the run the exe you downloaded and it should flash it for you.
thanks forza ! your a star worked a treat
qtek 9090 with USB V2.06 message error
I have the same problem with my qtek 9090, but I dont can sync my pocket pc. I see only USB V2.06 if the pocket is full charged ( and serial if not on the crable connected ).
Why I can not sync this with my laptop??
I have make a hard reset but still not work!!!
please help me
I have read many post but nothing found...
thank you
scharmander ( newbee )
I’m happy to share with you the Arabic support files for the HTC S620 device. Unzip the attached files and install the two cab files, that’s it.
Good Luck.
Thanks anaq8i
Arabic programs
Hi,
Here is useful Arabic programs cab.
Take care
it didnt work , can u illsturate more please..
Arabic Files for HTC S620
Hi,
Here is the full list with instruction file. You need to follow installation instruction and feedback.
Thanks
does it work with wm5? does the phone need to be unlocked? i can see the arabic letters but they are backwards. the arabic software says" cannot run on your device". i have t-mobile dash (htcS620 ) and windows mobile 5.
How can I put other languages?
Thanks
Yeshai
i tried doing installing both methods several times, its never worked for me. every time i install it and restart the phone, it never boots to the home screen, it just reboots over and over.
i have the t-mobile dash with windows mobile 6
any suggestions?
The arabizer software does work with WM5.
does the phone need to be unlocked? anaq8i?
ill reinstall windows mobile 5 on the dash and try installing it again, but it sucks that i cant get it to work with windows mobile 6, but then again, i more or less just wanna see some arabic script on a smartphone for once! anyway i think i found another method to be able to display arabic text on windows mobile 6, but i wont have time to test it out til later
callmerani, did it work for windows mobile 5? and which files did u install? thx also both arabizers install sucessfuly but the software says cannot run and the arabic letters are read backwards and they are disconnected. i tried these on wm6 but it just crashed my phone so i know that i can make it work on wm5. when i install the arabizer suite it says (translated from arabic backwards) this program is made for a previous version than windows mobile 5
i installed it now on a t-mobile dash windows mobile 5. arabic text finally showed up, but often it was backwards and the letters were not connected. most of the programs that came with it also didnt work, and i couldnt send txt msgs nor type in arabic. also, none of the secondary symbols worked while typing, like the one's u normally access by pressing alt. also, looking through the software, it is obvious it was meant for a pocket pc, not a smartphone.
My phone is an HTC s620, not branded to any carrier and no unlocking to do.
callmarani....here same problem ..is there a way i can format it of fix it ?
I am stuck too with this stupid SW! I need to get the hell out of this ARABIC DEAL!!! it missed up my phone
callmerani it seems that me and you have the same problem. we see the letters backwards and disonnected.
has anyone tried this?
http://www.pocketgear.com/software_detail.asp?id=20118
it is made for windows mobile 5 but the demo wouldnt install on my phone for some reason
all of u guys have problems. so does anyone read arabic?? or u guys are just testing and searching . coz this matter is getting me nuts !! either it reads arabic or i go back to my N80 nokia .
HTC S621
none of the programs listed here worked with mine. After unzipping and installation, the phone displays Arabic letters backwords and detached. My HTC S621 is running WM 5.0.
Thought of sharing this.
thank you
i guess we just have to wait until a compatible software is released
Hi guys yesterdsy i tried to update my g4 version by lg bridge then my phone was on English and i neded hebrew language (im from israel) so i desided to go factory data reset
But then again i dont have hebrew language and i got another problem
After turn of and power on the phone i got a warning message
"
Current version is not available for user cant find matched cust fornt code mcc\mnc
Ffffff subject 75"
Hi everyone ,
(first sorry for my bad english)
i got a g8 rio-l01 with a few problem ( no imei , no sn , no wifi and bt mac adresse) all this problem was solved using the hcu tool
but the biggest problem is the phone boot in a factory mode ,i can see this in the projectmenu>veneer informaton>other info>run mode: factory
so in this mode :
1-i have no shortcut panel and notification panel when i slide from up to down nothing come
2-no signial or network conection
3-in the first home page in the phone i have MMIs app/software upgrade/MMI/projectmenu/MMIa,
in the second one i have runningtest3
in the last one basic android app
4-i can't use keyboard
so i have trayed i think all huawei g8 firmware and nothing change
trayed with DC phoenix methode (the two methode) and same problem
trayed with the original soft (RIO-L01_M105_Board Software_general_Android 5.1_EMUI 3.1_05021TJY) and no change
trayed with l02 ,l03 ,tl00 ,slim6 and cm13 and the problem persist
bootloader and frp are unlocked ,sim too with hcu and phone rooted
if i remove appfac from user data and reboot the keyboard Appears and other app Appears but the phone stay in factory mode with no upper pannel and no network signial
i can use wifi and bt
in fastboot getvar pruduct give msm8916 (it's normal??? the phone is an msm8936)
i think there is a currupted or a missing file or partition
i have all factory flash file
bootloaderimage: huawei_msimage.mbn, MPRG8936.mbn (i don't know how tu use this two files)
fastbootimage: boot.img, ,cache.img ,cust.img ,emmc_appsboot.mbn ,erecovery.img ,frp.img ,fs_image.tar.gz.mbn.img ,gpt_both0.bin ,hyp.mbn ,log.img ,misc.mbn ,modem_st1.mbn ,modem_st2.mbn ,NON-HLOS.bin ,oeminfo.mbn , persist.img ,recovery.img ,rpm.mbn ,sbl1.mbn ,system.img ,tz.mbn,userdata.img ( and all crc file )
any idea are welcome
thank you
Hi again
So after many test ( and break and unbreak the soft many times) by editing prop and conf files, i noticed that the ro.runmode is the command controling the boot mode.
But i don't know were is this command and if it's possibol:
- To force ro.runmode=normal?
- Or any solution to by pass runningtest3 app or to fake the result?
Thank you (any help are welcome i don't worry about bteaking the phone)
Finally the phone is fully dead ?
After many flash factory, stock and custom i decided to find the way to enter to hs-usb 9008 mode and i find,by flashing the phone with cherry honor 4 rom. And the phone rebooted in 9008 mode, than flashed the ddr and the msm8936 file with zte tool. The msm will not finish and the phone reboot in fastboot (with red, green,blue screen) than reflashed factory rom with dc unlocker the phone rebooted normal but with the same problem that i have in the first.
Second try, flashed with cherry, entred 9008 mode,reflashed with zte tool (by error used a bad msm8936 file from lenovo)
And the phone stop working not detected and black screen
Third try, desassemled the phone, removed battery find test point after many risky test,the phone boot again in 9008 mode.
Reflashed with zte tool, enter red green blue fastboot, and decided to reflash all the factory with fastboot flashall méthode to unbrick an msm8916. Fastboot finish with many failed.
The phone rebooted but black screen and blinking led with continus (red,blue, green), not detected in pc, trayed with test point and nothing
I think it's fully dead now
Sorry for all this long text but just to share expérience
Thank you
And no it's not dead ðŸ˜, find the way to boot it again in 9008 mode with shorting two test point
Here we go for other test
السلام عليكم
hello friend
have you tried to flash the OEMINFO partition (if not be careful because the unlocked code of the bootloader will be changed and you need to read the new one with hcu client)
if you dont know how to do, tell me
sorry for bad english I'm not english man
xzanium said:
السلام عليكم
hello friend
have you tried to flash the OEMINFO partition (if not be careful because the unlocked code of the bootloader will be changed and you need to read the new one with hcu client)
if you dont know how to do, tell me
sorry for bad english I'm not english man
Click to expand...
Click to collapse
allrady solved my problem with an oeminfo but it work only single sim i need an other oeminfo with dual sim
thank you
How To Get Oeminfo
makabress said:
allrady solved my problem with an oeminfo but it work only single sim i need an other oeminfo with dual sim
thank you
Click to expand...
Click to collapse
makabress Please clear here how to get oem info and write it.. i m alredy face same problem..
hellowbd said:
makabress Please clear here how to get oem info and write it.. i m alredy face same problem..
Click to expand...
Click to collapse
Hi , i found the oeminfo searching in google. I will try to find it again
hello
i a have the same prolem but i cant find "the service rom" too, my phone is stuck in mode 9008 i tried to do the rom by myself but witouth any succes.... i read in a post that i cant try to put the "Huawei_Honor_Cherry_L04_V100R001C900B150_India_4.4.4_EMUI_3.0_05021SLQ" who has the same structure but cannot flash phone said "bootloaderimage" fail
please anyone can help me? i am 2 months witout phone... sorry about my bad english im a spanish guy
rio-l01 test point
hi, please i can't found rio-l01 test point can you help me
rmili25 said:
hi, please i can't found rio-l01 test point can you help me
Click to expand...
Click to collapse
test point are in the left/right side of the display connector, you can use a small wire to short it
JoseBankai said:
test point are in the left/right side of the display connector, you can use a small wire to short it
Click to expand...
Click to collapse
thank you brother
please i have the same problem ( rio-l01 no service no call ) can you help me please by oeminfo file or other things
excuse me i'am bad in english
still having the same problem, no solution, try to resoldering emmc, processor, voltage are ok, everything works in other board, so the problem is still the **** mode 9800 and the vanished "service rom" (not trully vanished but every service that i call to fix this ask me for a lot of money just to fix 1 phone... not worth it..) hope somebody can explain this at least, and why is happening, maybe one day can recovery my data on thtat phone....