Related
Hey guys,
There's a new RIL that should resolve all issues with old RAPH/DIAM's. Data, the works! Let me know if it works for everyone. This latest RIL is from schteve, who enabled data functionality on older radios based on hyc's work.
Without further rambling, here's how to install it:
Take the .zip that's attached and extract it to your SD card - either the root of the card, or in a folder, just note where you put it. You should have one file, libhtcgeneric-ril.so.
Go to your froyo.user.conf file (in the conf directory where you run HaRET.exe from to start FRX07...) Edit this file, preferably with Notepad++ (regular Notepad in Windows will make the lines a big jumble...)
In the CustomCommands section, put this command:
Code:
mount --bind /sdcard/libhtcgeneric-ril.so /system/lib/libhtcgeneric-ril.so
Boot!
If the editing the froyo.user.conf file is daunting, I've also attached one. Please change the filename from froyo.user.conf.txt to froyo.user.conf.
Both the command above, and the one I've attached assumes you have placed the libhtcgeneric-ril.so file is a the root of your SD card - no folders. Change the /sdcard/ side to /sdcard/mods/libhtcgeneric-ril.so if you have it in a folder called 'mods' which is at the root of the SD.
Alrighty folks! Let me know how it goes. I don't have data on my tester phone, so hopefully that works - also let me know if you can get a location using netloc (not GPS or wifi location, cell-tower location...) in Google Maps or something else that supports it. Please report any other issues related as well...
Edit - and MMS! Let me know if that works now as well... probably will need to enter in APN info in order to send.
Sincerely Thanks
Arrrghhh,
Downloaded and I will try it ASAP my battery is charged again.
Arrrghhh Thanks again for all your patient and time you give to this, even I own a DroidX since December I want to gift my HTC Diam500 CDMA to my niece (but you know today Kids, if it is not an iphone or Android they will not use it, LOL).
I have read the @Hyc(highlandsun) comment in Diam500 CDMA Thread and I understand the situation, Thanks again, really apreciate your effort.
P.S: Maybe you need to promote/publicity more this Thread, I end here thanks to @Starfox and @Hyc.
I have a HTC Diamond 500 CDMA from Sprint
and the ACTUAL FROYO FRX07 (15 July 2011) LIST of Roofts, initrd, zImage, module and System-ext2 COMBINATION that I'm testing with my HTC Diamond CDMA is:
1.- System-ext2 (15-July-2011) FroyoX07 (Froyo)
2.- I USE THIS ROOTFS (with the NEW RIL) Rootfs-20110721-258e98b.zip (21-July-2011) at First boot up (with clean data-img and erase Android folders) it appear the "OOps smd-tts mismatch" Loop but after a minute or two it appear the Xandroid boot Animation. This time the video doesn't freze or is eratic at all!!!!!!!!!! and after the long "data.img" re-creation (5-7 minutes) it bootup OK. NO lockscreen this time so I can start using it without a problem
Rootfs-20110721-258e98b.zip
3.- initrd-20110429-a3eace0.gz (29-April-2011 file is the same a 15-July-2011)
4.- zImage and Kernel module htc-msm-linux @ 20110718_223029-package.tar (18-July-2011)
5.- and Of course using this BETA FIX for CMDA phones (please use the "mods" folder to place your file so everyone is in the same channel.
So the XDAndroid folders are in /sdcard/andboot/
and the mod RIL goes here in /sdcard/andboot/mods/
the "config file" goes in /sdcard/andboot/conf/
** NOTE: ** I attached the "froyo.user.conf.txt" file with the new folder address
just remmeber to erase the ".txt" extension and copy this one to /sdcard/andboot/conf/
It is working!!! Wait what do we need to test????
Arrrghhh,
So FAR works fine but a little bit slow (some FC, no reboots). Slow as I have noticed weeks ago with July 21th RootFS
Wait!!!! what things do we need to test it???
As I have said RootFS July 24th, 26th and 27th are more fast but they are more hard to by pass the Loop error message.
And As I have said RootFS July 16th after it bootup and passed the XDAndroid bootanimation, it load ándroid but it is not UNlockeable the "Lock Screen".
By the way I neither had line in my HTC,
1.- but I have test enter to "network operator" (at Wireless setting) and know it don't FC anymore.
2.- Audio is NOW working (at least ringtones)
3.- Not one SOD,
4.- neither no problem at all to unlock it.
5.-Wifi works fine (enable, disconecting and reconecting)
update: WIFI is very slow, I'm less than 2 meter from the antena
6.- Google Maps can't locate the position with the wifi antena (as in my DroidX) but I guess it will do with the CDMA antenas (aGPS).
7.- GPS antena works really fast (more fast than in Windows without QuickGPS.
8.- As Hyc said, It still appear the loop error message but after one-two minutes the XDAndroid bootanimation starts.
Ok so this combination is working but it is more more Slow than FRx06.
Please Arrghhh let me know what else do you want to be test.
I have to go to work now so I will come back upto night.
Have a nice day!!!!
I already mentioned what I changed in the first post - the only thing was adding the RIL, and using the 0622 kernel (linked in the first post).
I'm on the newest rootfs and FRX07. Phone is screamin' fast, but this thing has no service (so it'll connect to the towers, but data will never work). So maybe I'm not a great test case... for me, it's just as fast as 06, if not faster.
arrrghhh said:
I already mentioned what I changed in the first post - the only thing was adding the RIL, and using the 0622 kernel (linked in the first post).
I'm on the newest rootfs and FRX07. Phone is screamin' fast, but this thing has no service (so it'll connect to the towers, but data will never work). So maybe I'm not a great test case... for me, it's just as fast as 06, if not faster.
Click to expand...
Click to collapse
Sprint Touch Diamond. Same setup. Same results. Incoming and outgoing calls look to work.
Added Android/internet APN and restarted. Still no data.
Bushrod said:
Sprint Touch Diamond. Same setup. Same results. Incoming and outgoing calls look to work.
Added Android/internet APN and restarted. Still no data.
Click to expand...
Click to collapse
You should have data tho, right? As in you're paying for data? The phone I'm testing on doesn't have service (at all) so it'll never connect to data.
Did you make sure the APN was "selected"? APN should have a radio button next to it that's filled green (not "empty"/gray).
Might have to do some advanced troubleshooting with you at some point. If you get a few hours of free time, hop on IRC (#xdandroid on Freenode) and hopefully someone will be on to help...
Thanks arrrghhh, Bell Diam500, the phone service works, no data. data icons (e.g. 3G, Evdo) don't show up. the android doesn't even say that I'm on Bell. it used to show "BELL" with FRX06). android is def faster than FRX06.
I tried to enter different APN's i found online, but as soon as I change MCC or MNC, android doesn't save the APN.
vahid2233 said:
Thanks arrrghhh, Bell Diam500, the phone service works, no data. data icons (e.g. 3G, Evdo) don't show up. the android doesn't even say that I'm on Bell. it used to show "BELL" with FRX06). android is def faster than FRX06.
I tried to enter different APN's i found online, but as soon as I change MCC or MNC, android doesn't save the APN.
Click to expand...
Click to collapse
Can you tell me what values you're using?
What does the service say? Should say "XDAndroid" now for your service carrier instead of your normal carrier.
Hop on IRC if you have a few...
vahid2233 said:
but as soon as I change MCC or MNC, android doesn't save the APN.
Click to expand...
Click to collapse
That generally means don't change the MCC or MNC, leave them as-is.
arrrghhh said:
Can you tell me what values you're using?
What does the service say? Should say "XDAndroid" now for your service carrier instead of your normal carrier.
Hop on IRC if you have a few...
Click to expand...
Click to collapse
I used the different combinations of name="internet","Bell Internet","Android", APN="pda.bell.ca","internet" the rest were
Proxy: web.wireless.bell.ca
Port: 80
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC: http://mms.bell.ca/mms/wapenc
MMS proxy: web.wireless.bell.ca
MMS port: 80
MMS protocol: WAP 2.0
MCC : 302
MNC : 610
APN type : <Not set>
and the ones here
http://forum.xda-developers.com/showpost.php?p=6799315&postcount=8296
vahid2233 said:
I used the different combinations of name="internet","Bell Internet","Android", APN="pda.bell.ca","internet" the rest were
Proxy: web.wireless.bell.ca
Port: 80
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC: http://mms.bell.ca/mms/wapenc
MMS proxy: web.wireless.bell.ca
MMS port: 80
MMS protocol: WAP 2.0
MCC : 302
MNC : 610
APN type : <Not set>
and the ones here
http://forum.xda-developers.com/showpost.php?p=6799315&postcount=8296
Click to expand...
Click to collapse
Are there default MCC/MNC values? I use 310/00, try that.
Also, on an unrelated note - hyc reverted the SMD_TTY patch back to jonpry's original so that bug is now fixed as well. CDMA RAPH/DIAM users should be able to use the newest kernel!
I also have a Sprint Touch Diamond.
I have been running FRX07 partially successful (but with issues answering calls due to slowness) using 6/22 kernel and a 5/3 rootfs.
Just tried the newest rootfs with this beta fix. Similar to the other person, phone works but data is not working.
nowhereman5 said:
I also have a Sprint Touch Diamond.
I have been running FRX07 partially successful (but with issues answering calls due to slowness) using 6/22 kernel and a 5/3 rootfs.
Just tried the newest rootfs with this beta fix. Similar to the other person, phone works but data is not working.
Click to expand...
Click to collapse
Congrats on your first post! Join date of Oct 2008, epic...
At any rate, hop on IRC if you can. I'd like to debug this.
arrrghhh said:
Are there default MCC/MNC values? I use 310/00, try that.
Also, on an unrelated note - hyc reverted the SMD_TTY patch back to jonpry's original so that bug is now fixed as well. CDMA RAPH/DIAM users should be able to use the newest kernel!
Click to expand...
Click to collapse
There is a default, MMC=302, MNC=64.
tried 310/00, the APN disappears, as if i have deleted it. any change to mmc or mnc makes apn disappear.
I'm going to try the new kernel now.
vahid2233 said:
There is a default, MMC=302, MNC=64.
tried 310/00, the APN disappears, as if i have deleted it. any change to mmc or mnc makes apn disappear.
I'm going to try the new kernel now.
Click to expand...
Click to collapse
Kernel won't make a difference on the APN/data issue.
As for the 'default' values (302/64) what if you just leave those...? Just add a name and APN. Android/internet, whatever you want.
arrrghhh said:
Congrats on your first post! Join date of Oct 2008, epic...
At any rate, hop on IRC if you can. I'd like to debug this.
Click to expand...
Click to collapse
Just tried the new 08/05 kernel and it won't even find the voice network with that one.
I'll try to get on IRC in a bit.
I have a Sprint Touch Pro (RAPH400). I just tried the 0805 kernel and the new RIL. The phone boots past the point where preiously you'd get the smd loop! Great job on fixing that! However, once the phone boots it is unusable. There is such a delay when clicking on anything. I even let it sit for 15 or so minutes after boot thinking it might still be loading. No luck. Also, the radio appears to be stuck off. Then, I disabled the new RIL with the same results as above.
Ok good news & bad news!!!!
agibby5 said:
...I have a Sprint Touch Pro (RAPH400)...
Click to expand...
Click to collapse
Holy Moly!!! GOOD NEWS & BAD NEWS!!!! For DIAMOND 500 Sprint
August 5th 2011 Kernel FIXED the "OOps smd-tty- mismatch message" error. By the way, that "message error" appeared just after the line where the command "IP_TABLE" was run. I'm using the "RIL LIB*** config.user FIX"
But NOW again "XDAndroid BOOTANIMATION" get really laggy and animation stop several times.
As for "Aggiby5" Device bootup succesfully, but it is really slow and erratic. Device goes Alone (without open any Apps) to black screen in less than 10seconds (as SOD) and finally after waiting and waiting pressing the power button it appear the "Lock Screen" which is UNLOCKEABLE this time (It is a reverse!!! as what happended with combination Kernel July 16th and RootFS July 16th that was UNLOCKABLE at start screen.
I will try with other RootFS: Maybe July 24th or July 26th. NO good so far with July 27th and July 21th RootFS
THANKS for the FIXED "OOps" Hyc!!!!!!!!!!!!
Arrrrrghhhhhhhhh I have one question and one suggestion,
my logic tell me that this THREAD is for test and feedback for the RIL LIB**** FIX,
which people had reported that "internet DATA for CDMA signal" is not working which was supposes to be the FIX for.
SO MAYBE WE DON'T have to MIX the things here (by reporting here for the new kernel),
So where do we have to report about the new Kernel???
Can someone point me in the the right direction of how to change out the kernel in the Frox7 bundle with the just released fixed one?
-Thanks
okay guys i recently installed the miui rom and everything is amazing! but i have no network connection or anything! iv tried installing different radio's and i still have no connection PLEASE can someone help me
Thankyou in advance!
What network are you suppose to be on? I think posting here won't help... Shouldn't start a new thread in the development section unless you developed something
Try the ZSJPG Modem, I love it and no battery drain issues:
http://www.megaupload.com/?d=KYHLA3HF
I'm on Rogers (AT&T band). Your data connection might not have been enabled too... Pull down the menu and notification from the top and see if that data icon is on or not...Its the icon that look like a sync icon.... That's the data icon.
This may sound silly but have you pulled down the status bar and pressed the first two buttons?
Dan
Sent from my GT-I9000 using XDA App
sorry if i have posted in wrong place guys :/ and yes i have put the first too buttons on lol. and om on o2 network
andylassu said:
sorry if i have posted in wrong place guys :/ and yes i have put the first too buttons on lol. and om on o2 network
Click to expand...
Click to collapse
check your apn settings.
andylassu said:
sorry if i have posted in wrong place guys :/ and yes i have put the first too buttons on lol. and om on o2 network
Click to expand...
Click to collapse
Just checked the O2 website: http://service.o2.co.uk/IQ/SRVS/CGI-BIN/WEBCGI.EXE/,/?,New,KB=Companion,T=Glossary_mobile
Quad Band 850 MHz, 900 MHz, 1800 MHz and 1900 MHz.... Try the ZSJPG Modem, flash the zip file with recovery.
Let me know...
Edit: I second krarvind: check your apn settings as well, most of them uses this:
Name: O2 Mobile Web
APN: mobile.o2.co.uk
UserName: web
Password: web
MCC: 234
MNC: 10
APN Type: default
And Post Pay,
Name: O2 Post Pay
APN: wap.o2.co.uk
UserName: o2wap
Password: password
MMSC: http://mmsc.mms.o2.co.uk:8002
MMS Proxy: 193.113.200.195
MMS Port: 8080
MCC: 234
MNC: 10
APN Type: mms
Check your imei. It might be corrupted
mikko96 said:
Check your imei. It will be corrupted
Click to expand...
Click to collapse
Corrected that for you mikko
Flash back to stock, back up the efs folder and reinstall MIUI again.
Hello fellow XDA members. I decided to open up a new thread to help my fellow t889 users who have At&t service. I had gotten so much help in the past why not pay it foward? :laugh:
I was currently on Tweaked ROM and read lots of info on how to flash the new firmware for Tmobile LTE without loosing my current apps and info. Here are the steps that i took to get my LTE working. Thank you deeznutz1977 for providing the download file!
1. Download new firmware file here: https://docs.google.com/file/d/0ByasRfzCE6nRNHg4by1BRlZ3clE/edit?pli=1 (make sure you download and flash this file. I dont know if just flashing the radio will work or not.)
2. Make sure you have Mobile Odin Pro or buy from play store
3. Open up mobile odin pro and open the tar file you just downloaded.
4. Flash and after reboot you should still have your settings and apps. Just make sure that you check about device and that you did indeed install the new baseband version. T889UVBMB4
**note** if you are on a custom touchwiz rom you will lose it but all your settings apps and info will still be there. If you use kies you will have to reroot your phone. Mobile Odin Pro allows you to keep everything intact so i recommend that app.
Here is the speed test screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is my T889 showing on ATT service with LTE
Also make sure your apn settings are correct and that is the only one you are using. Delete the old one. Here are the settings i'm currently using:
Name:ATT LTE
APN: pta
Proxy: Not set
Port: Not set
User Name: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: Not set
APN type:default,admin,fota,mms,supl,hipri,internet
APN protocol: IPv4/IPv6
Bearer Unspecified
I am not a pro at this stuff but i will try to help everyone the best i can!
ill try your apn settings and report back.
---------- Post added at 04:02 PM ---------- Previous post was at 03:55 PM ----------
that apn doesn't work, i get no data at all. im going to try to get a new sim today. i also heard they may need to take off lte and readd it for it to stick.
Leave the apn settings and try *#2263#
There should be a menu for auto, wcdma, gsm, lte..... try going into LTE and pick band 17 and see if you pick up service... it should be on automatic.. if it is, try it and see anyway...
fix-this! said:
ill try your apn settings and report back.
---------- Post added at 04:02 PM ---------- Previous post was at 03:55 PM ----------
that apn doesn't work, i get no data at all. im going to try to get a new sim today. i also heard they may need to take off lte and readd it for it to stick.
Click to expand...
Click to collapse
ill try another time, thanks. spent too much time on this today. ill be getting the htc one anyways in a month.
Link is dead. Just as well, who knows how I would have messed up my phone. Thanks anyways
Sent from my SGH-T889 using xda premium
Just want to reply that I flashed just the modem from the new firmware and can confirm connection to LTE Band 17. I've yet to try speedtests but the behavior is definitely different than the previous radio. If it turns out to be true, FINALLY!!!!
dead link
ViciousLSD said:
Hello fellow XDA members. I decided to open up a new thread to help my fellow t889 users who have At&t service. I had gotten so much help in the past why not pay it foward? :laugh:
I was currently on Tweaked ROM and read lots of info on how to flash the new firmware for Tmobile LTE without loosing my current apps and info. Here are the steps that i took to get my LTE working. Thank you deeznutz1977 for providing the download file!
1. Download new firmware file here: https://docs.google.com/file/d/0ByasRfzCE6nRNHg4by1BRlZ3clE/edit?pli=1 (make sure you download and flash this file. I dont know if just flashing the radio will work or not.)
2. Make sure you have Mobile Odin Pro or buy from play store
3. Open up mobile odin pro and open the tar file you just downloaded.
4. Flash and after reboot you should still have your settings and apps. Just make sure that you check about device and that you did indeed install the new baseband version. T889UVBMB4
**note** if you are on a custom touchwiz rom you will lose it but all your settings apps and info will still be there. If you use kies you will have to reroot your phone. Mobile Odin Pro allows you to keep everything intact so i recommend that app.
Here is the speed test screenshot
Here is my T889 showing on ATT service with LTE
Also make sure your apn settings are correct and that is the only one you are using. Delete the old one. Here are the settings i'm currently using:
Name:ATT LTE
APN: pta
Proxy: Not set
Port: Not set
User Name: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: Not set
APN type:default,admin,fota,mms,supl,hipri,internet
APN protocol: IPv4/IPv6
Bearer Unspecified
I am not a pro at this stuff but i will try to help everyone the best i can!
Click to expand...
Click to collapse
i tried to download your google link, it does not work. ive been trying to figure out how to flash att rom on my t889 for days now with no luck. I NEED LTE lol
ViciousLSD said:
Hello fellow XDA members. I decided to open up a new thread to help my fellow t889 users who have At&t service. I had gotten so much help in the past why not pay it foward? :laugh:
I was currently on Tweaked ROM and read lots of info on how to flash the new firmware for Tmobile LTE without loosing my current apps and info. Here are the steps that i took to get my LTE working. Thank you deeznutz1977 for providing the download file!
1. Download new firmware file here: https://docs.google.com/file/d/0ByasRfzCE6nRNHg4by1BRlZ3clE/edit?pli=1 (make sure you download and flash this file. I dont know if just flashing the radio will work or not.)
2. Make sure you have Mobile Odin Pro or buy from play store
3. Open up mobile odin pro and open the tar file you just downloaded.
4. Flash and after reboot you should still have your settings and apps. Just make sure that you check about device and that you did indeed install the new baseband version. T889UVBMB4
**note** if you are on a custom touchwiz rom you will lose it but all your settings apps and info will still be there. If you use kies you will have to reroot your phone. Mobile Odin Pro allows you to keep everything intact so i recommend that app.
Here is the speed test screenshot
Here is my T889 showing on ATT service with LTE
Also make sure your apn settings are correct and that is the only one you are using. Delete the old one. Here are the settings i'm currently using:
Name:ATT LTE
APN: pta
Proxy: Not set
Port: Not set
User Name: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: Not set
APN type:default,admin,fota,mms,supl,hipri,internet
APN protocol: IPv4/IPv6
Bearer Unspecified
I am not a pro at this stuff but i will try to help everyone the best i can!
Click to expand...
Click to collapse
can I just use odin? or do I have to buy the app?
holy ****! it worked! I just flashed it with odin. I can confirm it. thanks!
braintez said:
Just want to reply that I flashed just the modem from the new firmware and can confirm connection to LTE Band 17. I've yet to try speedtests but the behavior is definitely different than the previous radio. If it turns out to be true, FINALLY!!!!
Click to expand...
Click to collapse
Just to confirm, all I need to do is find the AT&T Modem and flash? Is the file on the original post updated with the AT&T Modem or is it stock T-Mobile firmware, if so which modem does it come it?
Thanks!
last couple of days on LTE has been great. I hope everyone is getting the same benefits I'm getting.
---------- Post added at 11:47 PM ---------- Previous post was at 11:46 PM ----------
James62370 said:
Just to confirm, all I need to do is find the AT&T Modem and flash? Is the file on the original post updated with the AT&T Modem or is it stock T-Mobile firmware, if so which modem does it come it?
Thanks!
Click to expand...
Click to collapse
I would just flash it with Odin. you should be fine.
Vallista said:
last couple of days on LTE has been great. I hope everyone is getting the same benefits I'm getting.
---------- Post added at 11:47 PM ---------- Previous post was at 11:46 PM ----------
I would just flash it with Odin. you should be fine.
Click to expand...
Click to collapse
Is there anything special about this rom? I Mean I flashed a stock root injected rom with the latest OTA LTE Is enabled. however I cannot get LTE service on ATT.
Account has Dataplan wih LTE
Have a LTE SIM.
Can select different bands with the *#2263#, nothing will not register on ATT LTE network HSPA works.
So what gives? how are you able to get LTE?
And yes my area supports ATT LTE
Update: flashed this rom, nothing still won't connect to ATT LTE.
Im on jdevils rom and just flashed the modem with mobile odin. Put the apn in and getting nice speeds in GA area.
Roughly 10mb in house, 30mb down when out of house.
Posted this in another thread.
Sent from my SGH-T889 using xda premium
Bricked?
James62370 said:
Just to confirm, all I need to do is find the AT&T Modem and flash? Is the file on the original post updated with the AT&T Modem or is it stock T-Mobile firmware, if so which modem does it come it?
Thanks!
Click to expand...
Click to collapse
i flashed odin with the rom from the downloaded link, and everything seemed to have went well until i got a blue android with a pirate patch and a lightning bolt on its chest on my screen. it wont go away, i tried to boot it in recovery, it wont work even after i took out the battery. what can i do??!?!?!!
Can I flash this if I'm on tmobile cause I'm not getting lte speeds in Atlanta but a guy that posted the pictures is
Sent from my SGH-T889 using xda app-developers app
the server is located in atlanta, he most likely is not physically there.
I have been trying to achieve att lte on the sgh-t889 for quite some time now. I have the current lte sim card, have tried multiple apn settings as well as being on the current modem. any help to achieve this would help me out greatly. Thanks for your time.
Try this apn.
Name
ATT Phone
APN
phone
MMSC
Http:/mmsc.mobile.att.net
MMS port
80
MCC
310
MNC
410
APN type
Default,mms,supl
Leave eveything else. This works for me on my T889 using att service.
blazablaz said:
Try this apn.
Leave eveything else. This works for me on my T889 using att service.
Click to expand...
Click to collapse
I have been using this but am only getting hspa+ data speeds. Are you receiving lte speeds? if so do you mind showing a speedtest.net screenshot? Thanks for the help.
I'll post one when i get out of work(not able to carry phone in my job). It shows the lte signal on my phone. when i'm out of an lte area the signal goes away and displays 4g. but dl/ul speed were in the 5d/1up mb range. once i used the apn, it jumped to 20mb down 10 up depending where i am.
I REALLY NEED HELP.........I flash my galaxy s3 SCH-L710 from sprint to metro but I cant receive mms .and cant send it so can you guy help me ..and my phone is rooted .because when I paid to get my phone flashed to metro .......but now I got this big problem ..I can guy explain step by step on how to do this ...plzzzzzz and thank you
breakmental said:
I REALLY NEED HELP.........I flash my galaxy s3 SCH-L710 from sprint to metro but I cant receive mms .and cant send it so can you guy help me ..and my phone is rooted .because when I paid to get my phone flashed to metro .......but now I got this big problem ..I can guy explain step by step on how to do this ...plzzzzzz and thank you
Click to expand...
Click to collapse
download Gosms pro go to the settings,mms setting look for
MMSC http://mms.metropcs.net:3128/mmsc
MMS proxy: wap.metropcs.net
MMS port: 3128
and it should be in order like this and try to send a mms using gosms pro only.
can't send mms
Thank u sir .but I try that all ready and it did not work
You may want to check out THIS THREAD.
Hello,
Not sure if this is the best place to post ask for help but since the thread for that rom is closed im hoping someone will be bale to give me some advice.
I just recently updated to the newest version of jedi mind trick and for some reason none of my apps are able to connect to internet even tho mobile data is enabled and wifi is turned off.
Is this just something i need to turn on or did i ****ed up while flashing the rom?
Thanks all!
mr__T said:
Hello,
Not sure if this is the best place to post ask for help but since the thread for that rom is closed im hoping someone will be bale to give me some advice.
I just recently updated to the newest version of jedi mind trick and for some reason none of my apps are able to connect to internet even tho mobile data is enabled and wifi is turned off.
Is this just something i need to turn on or did i ****ed up while flashing the rom?
Thanks all!
Click to expand...
Click to collapse
go to settings
more settings
mobile network
Acces point names (APN settings) it needs to be this for telus Canada
Name: TELUS SP
APN: sp.telus.com
Proxy: 74.49.0.18
Port: 80
Username: <Not set>
Password: <Not set
Server: <Not set>
MMSC: http://aliasredirect.net/proxy/mmsc
MMS Proxy: 74.49.0.18
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 302
MNC: 220
APN type: default,mms
for tmobile and the others i dont know look for apn setting
maybe flash a radio http://forum.xda-developers.com/showthread.php?t=1895400 SGH-T989D TLMC4 (Telus) 4.1.2is the newest radio
This is what i needed. Thanks!