Related
Hi,
I was flashing the UK Sbf on a unbricked phone using RSD Lite 4.9. During the flashing process, suddenly phone turned off and disconnected with RSD Lite displayed a message "Failed, Device disconnected error".
I actually had 40% battery b4 starting the process. is it the low-battery problem?? Now, I am not able to do anything with the phone. When I have plugged in for charging, it says nothing. Is it dead?? But, when I have connected to the USB, a white small light comes on the top.
How to get my phone back? My phone is from Honk kong and i have rooted it as well.
Would u please guide me if we can do something??
Many thanks in advance,
Regards,
Naga
Charge your battery in another phone or in an universal charger and try to flash once again. Or you can repeat flashing procedure on another PC.
nagnrik said:
Hi,
I was flashing the UK Sbf on a unbricked phone using RSD Lite 4.9. During the flashing process, suddenly phone turned off and disconnected with RSD Lite displayed a message "Failed, Device disconnected error".
I actually had 40% battery b4 starting the process. is it the low-battery problem?? Now, I am not able to do anything with the phone. When I have plugged in for charging, it says nothing. Is it dead?? But, when I have connected to the USB, a white small light comes on the top.
How to get my phone back? My phone is from Honk kong and i have rooted it as well.
Would u please guide me if we can do something??
Many thanks in advance,
Regards,
Naga
Click to expand...
Click to collapse
Don't worry.
If the white led brights on the phone, it is possibly charging.
If not, read the following thread, there's the solution:
http://forum.xda-developers.com/showthread.php?t=926012
BE CAREFUL WITH IT!
Well, thanks for the quick repsponse guys... I try this... Hope, it works...
I have tried it... no luck.... But, I am a bit sure I have connected those wires properly n mounted the battery..... I got this mobile from Honk-kong.. I was actually flashing a UK Firmware (SBF)... Does it matter?? I did not wipe or any resets prior to flashing.. I have successfully rooted the mobile after Hard trails... thought of flashing it to froyo... But, mistakenly did this... )..... It went well till 73% and suddenly disconnected error and phone turned off with a white light on the top..
Any other way other than sending it to Motorola support... And I am in Dubai now.. this mobile is still not available here... so no local support from Motorola end. I have to pack it to either UK or HK...
Any trails???
Many thanks in advance.....
What .sbf are you flashing? The 2.34 or 2.5.1?
nagnrik said:
I have tried it... no luck.... But, I am a bit sure I have connected those wires properly n mounted the battery..... I got this mobile from Honk-kong.. I was actually flashing a UK Firmware (SBF)... Does it matter?? I did not wipe or any resets prior to flashing.. I have successfully rooted the mobile after Hard trails... thought of flashing it to froyo... But, mistakenly did this... )..... It went well till 73% and suddenly disconnected error and phone turned off with a white light on the top..
Any other way other than sending it to Motorola support... And I am in Dubai now.. this mobile is still not available here... so no local support from Motorola end. I have to pack it to either UK or HK...
Any trails???
Many thanks in advance.....
Click to expand...
Click to collapse
Can you start it in flash mode or recovery mode?
(vol up + power or vol down + power)
Hi, I am not sure of this as I have downloaded too many files for rooting, froyo upgrade and other stuffs.. But the file name is "UK_rom.sbf" and size 370MB+. are there any consequences??
avers said:
Can you start it in flash mode or recovery mode?
(vol up + power or vol down + power)
Click to expand...
Click to collapse
Yeah, I have charged it for sometime and trying to POWER+VOLUME-UP for boot loader only... It looks like dead, no repsonse from it... when I have put it for charging, it did not show any indication that it is being chraged.... anything went wrong???
nagnrik said:
Hi, I am not sure of this as I have downloaded too many files for rooting, froyo upgrade and other stuffs.. But the file name is "UK_rom.sbf" and size 370MB+. are there any consequences??
Click to expand...
Click to collapse
Ok, go here http://and-developers.com/sbf:defy and download an sbf, I use 2.5.1, however once you flash it you cannot downgrade it,,, There is owever a lot of develpment more recently for it, im running a smooth froyo on it now.
Anways, pick one, extract that file to your RSD folder.
Open your RSD lite
Pull the battery from your phone, wait a few seconds, put it in, and boot into bootloader (vol up and power).
Plug the phone in, as long as the white light comes on you should be good...
select your new sbf file and hit start on RSD, you should work..
Now depending on what you had prior, your only option may be to flash 2.5 which is what I had to do.. Again, Id rather have a phone that turns on then complain about not being able to downgrade..
Let me know
good luck from my side
hint: never used a file called "UK_rom.sbf" - little unspecific ;===)
-nevermind- good luck once again, hope you bring it back to work!
Well, mobile it self is not turning on... It is a strange issue.. And fortunately, It has been launched here a 3 days ago in UAE.. I went to a store to check if the issue with the battery.. I have replaced and tested it out.. No luck.. I did not c the % of the charging. May be Bootloader requires more charging than normal powering... Anyways, I am decided to submit it to Motorola here, they must help us out...
Thanks everyone here for the wonderful support.... love XDA.... keep u posted as soon as it is fixed.... Many thanks again....
I deserve a beer for this!!!
Did the same goof up....got greedy for froyo and couldn't resist f&(*ing my defy........was cribbing for 8 hours while figuring out the solution.... escaped office for this.....but finally finally .......i saved it.......man.....if blood is the answer for blooood....then it has to be 2.51 for 2.51....
please click the link below for the only feasible 2.51 sbf....flash your defy in a standard manner and kabbooooom........defy reincarnated...
:
hope it works for all the good people in need....it worked for me (Atleast my defy turned on still observing how it works)..
Defy 2.51 sbf
Sorry for being late to the party, but how did this turn out eventually?
Hi i had just flashed my phone back to standard rom with seus, and had rooted and was removing bloatware.
i used ADB Mask Controller for removing files because it was faster, but on the list of non essential apps i chose the ones a i wanted to get rid of, and accidentally clicked "delete all", because i thought it meant the all the files on the list. after that, i rebooted and the phone was dead, seus cant find it or anything, but now a day later when i press the power button, the led on the front blinks red a couple of times...
is it completely dead or is there a chance of getting it up and running again?
try flashtools
you should try bin4ry's flash tools it works most of times, there are a few tutorials around the forum but in general you just have to turn the phone off completely start flash tools select flash, select firmware and connect your phone pressing the back button just like in seus , also try posting problems like this in the general section, i know i'm no mod, but it helps keeping th forum clean , but don't sweat it, i think we all have done this when we started (i know i did XD)
Sorry if i posted it the wrong place, didnt think of other places cuz my bookmark leads me there.
Thanks for replying, but my problem is that i cant turn it on, when i press the power button, the only thing that happens is the led flashes red a few times.
Blinking red means that battery is empty. You can to charge it a bit with AC charger and then try to boot the phone.
yeah, sorry for the scolding , and i think it flashes red a few times because the battery drained, and flashtools is a pc program like seus, you don't have to turn your phone on, you connect it turned off, it is for flashing firmware to your phone and i recommended it because i think the reason your phone died is because of the missing apps, think of flashtools as a much MUCH better program for repairing your phone than the pc companion one or seus
also, here is a link to the main post for flashtools
http://forum.xda-developers.com/showthread.php?t=825664
edit: wiilweer beat me to it , and great port by the way, haven't tried it myself because my xrecovery is not working, but it looks great, specialy the 1000 in benchmark =O, excellent work men, thanks for the froyo port and your work
Thanks ill take a look at it again, hadnt seen the thread u linked now.
its been charging for a few hours and still just blinking... and it was at 100% when i started messing it up
maybe it is a stupid thing but...
have you tried
1) center hardware button + power for a few seconds?
2) disconnecting and reconnecting battery?
in the worst case you can try charging it with an external charger
but this means disassembling your mini:
http://www.ifixit.com/Teardown/Sony-Ericsson-Xperia-X10-Mini-E10i-Teardown/3124/1
Gx3 said:
maybe it is a stupid thing but...
have you tried
1) center hardware button + power for a few seconds?
2) disconnecting and reconnecting battery?
in the worst case you can try charging it with an external charger
but this means disassembling your mini:
http://www.ifixit.com/Teardown/Sony-Ericsson-Xperia-X10-Mini-E10i-Teardown/3124/1
Click to expand...
Click to collapse
Yea i tried that, but it didnt do anything.
maybe it just cant charge the battery. i could try to connect the battery from my gf's x10 mini
PressEsc said:
Thanks ill take a look at it again, hadnt seen the thread u linked now.
its been charging for a few hours and still just blinking... and it was at 100% when i started messing it up
Click to expand...
Click to collapse
The issue is not batery, its system files.
Do you have recovery instaled?
If no, download the flash tool and e10i firmware from this thread:
http://forum.xda-developers.com/showpost.php?p=10879519&postcount=2%22SE%20Firmware%20Files[/URL][/B]%3Cbr%20/%3E[URL=%22http://forum.xda-developers.com/showpost.php?p=10879528&postcount=3
Happy flashing.
Looks like its working now.
it wouldnt charge the battery, so i took the battery from another x10 mini, and then i flashed it. pc companion could find it and flash, with power from another battery
Dunno why it wouldnt charge the battery, maybe i deleted stuff that had something to do with power management.
Thanks for helping, i was already looking to buy another phone.
Thread belongs in the general section.
i have the very same problem !! ... WHAT did u dooo 2 fix this ?? am hopeless
try charging it and not with usb, if it wont start, try an external power source.
does it blink red when u press power botton?
Just want to share this, I do not create this procedure, and I forgot where I seen this.
1. Open SEUS, one it ask you to disconnect and connect. follow the next procedure.
2. Connect your X10 mini or Pro. Disregard SEUS Procedure
3. Press the Middle+Right+Power Button at the same time.
4. Once Screen Goes Blank, release all button except the middle.
5. now you could Update using SEUS.
Hope that help.
Sira. said:
i have the very same problem !! ... WHAT did u dooo 2 fix this ?? am hopeless
Click to expand...
Click to collapse
if the procedure above is not working you should try to recharge the battery or use one from another mini charged before trying that cause if battery is drained you won't be able to repair firmware...
http://www.ifixit.com/Teardown/Sony-Ericsson-Xperia-X10-Mini-E10i-Teardown/3124/1
PressEsc said:
Looks like its working now.
it wouldnt charge the battery, so i took the battery from another x10 mini, and then i flashed it. pc companion could find it and flash, with power from another battery
Dunno why it wouldnt charge the battery, maybe i deleted stuff that had something to do with power management.
Thanks for helping, i was already looking to buy another phone.
Click to expand...
Click to collapse
would u like 2 help me then >??
what is it doing?
I spent the whole yesterday afternoon and night and this morning trying to figure out what happened to my 'dead' x10 mini.
It has been lying there for over a year since I last tried reviving it.
Long story short, I forgot that I had flashed miniCM kernel on it. For some reason it just entered boot loop with Sony Ericsson logo and restarting and refused to charge. Then tried SEUS and Sony Update supposedly 'flashed' successfully, but I still could not get it to boot nor charge. Flashtool also was used to try a couple of other ROMs, until it dawned upon me I should flash back miniCM ROM since I think I had last used it year ago.
Voila it worked and I pressed BACK several times while the nAa logo came up. CWM was back. I jumped for joy... now I'm charging it and also downloading miniCM10 with gapps.
I really hope this helps - and that it would work for some of you out there in deep frustration. All the best! :good:
mcmlxxvi said:
I spent the whole yesterday afternoon and night and this morning trying to figure out what happened to my 'dead' x10 mini.
It has been lying there for over a year since I last tried reviving it.
Long story short, I forgot that I had flashed miniCM kernel on it. For some reason it just entered boot loop with Sony Ericsson logo and restarting and refused to charge. Then tried SEUS and Sony Update supposedly 'flashed' successfully, but I still could not get it to boot nor charge. Flashtool also was used to try a couple of other ROMs, until it dawned upon me I should flash back miniCM ROM since I think I had last used it year ago.
Voila it worked and I pressed BACK several times while the nAa logo came up. CWM was back. I jumped for joy... now I'm charging it and also downloading miniCM10 with gapps.
I really hope this helps - and that it would work for some of you out there in deep frustration. All the best! :good:
Click to expand...
Click to collapse
Looks like I went ahead of myself.
It managed to stay on in CWM... and I even managed to install update.zip and gapps, but once out of it the phone simply refuses to boot.
SEUS managed to flash stock ROM on it as well. However, even after leaving it hooked to the USB overnight (it only gets warm from this, not wall plug charger), it constantly looping in a flash mode (green LED) and then low batt mode (blinking red LED), it failed to boot up successfully on its own. After flashing the sony ericsson or custom ROM logo, it would go into a boot loop until the battery drains. Upon connecting back to wall charger, the first time it actually flashes real quick split seconds battery indicator of 2 out of 3, then go into the said boot loop again.
I really dunno if the battery's fried or did I do something wrong to hard brick it.
ok i have tmobile usa defy it was stock all the way not rooted nothing done to it one day it turned off and restarted on its own it entered a boot loop i didnt know why i then read up on it and found out this is not uncommon i guess so using rsd lite i attempted to flash the uk 2.21 it finished and said pass but never rebooted i was like wtf so i read more no answer sprang forth it couldnt be turned on in any way only a black screen and white led light also not uncommon so i followed all instructions even the mcgyver battery hack the computer shows the device as an omap flashable motorola device but rsd lite wont read it for some reason ive uninstalled and reinstalled the drivers and rsd lite multiple times my laptop chimes every time i connect the phone with battery hack but then and only then does it show up without rsd reading the device i cant flash it does anyone have any idea how to fix this im not a noob at all im just at my wits end on figuring this out and need some advice i dont care if its something experimental or if i need to rub the phone with vaseline i just need it fixed any help is appreciated thanks
hackulous said:
ok i have tmobile usa defy it was stock all the way not rooted nothing done to it one day it turned off and restarted on its own it entered a boot loop i didnt know why i then read up on it and found out this is not uncommon i guess so using rsd lite i attempted to flash the uk 2.21 it finished and said pass but never rebooted i was like wtf so i read more no answer sprang forth it couldnt be turned on in any way only a black screen and white led light also not uncommon so i followed all instructions even the mcgyver battery hack the computer shows the device as an omap flashable motorola device but rsd lite wont read it for some reason ive uninstalled and reinstalled the drivers and rsd lite multiple times my laptop chimes every time i connect the phone with battery hack but then and only then does it show up without rsd reading the device i cant flash it does anyone have any idea how to fix this im not a noob at all im just at my wits end on figuring this out and need some advice i dont care if its something experimental or if i need to rub the phone with vaseline i just need it fixed any help is appreciated thanks
Click to expand...
Click to collapse
For all i know if you have a black screen with white led you should see your device is RSDLite, are u using 4.9?
Did you tried powering on and off the phone with RSDLite turned on(even though you only see a black screen)?
For you to get out of that mess you will have to see Motorola white logo, then you will only need a wipe from recovery.
Ouch another downgrade that's not allowed. It actually says in many posts that you cannot downgrade from 2.51 which you probably had. Then again I made the same mistake once and just like the previous post suggests rsd lite 4.9 should see the phone. Make sure you also use the latest usb drivers. Then flash 2.51 or a later version to revive the phone, just like I did with mine.
Make sure you try the following. Pull the battery, start rsd lite, connect with the pc using the usb cable, hold the volume up button, replace the battery and press and hold the power button. It may take a while but the phone should show up in rsd lite.
Sent from my Moto Defy using Tapatalk
ok i tried everything you guys just said my drivers are up to date im using rsd 4.9 and im trying to flash the leaked tmo us froyo rom so it should fix it but the problem im facing is that the white light is no longer coming on and rsd is not showing it as a device but its in my computers devices and the only way it shows on my computer is if i use the mcgyver hack which makes me feel like the battery is dead so im going to try holding volume up before i put the battery in with the wires connected but all else is failing for some reason
edit: it didnt work im at a loss now i think i own a 400 dollar paper weight i just dont understand why rsd wont register it and the light blinks briefly when i hook it to the computer with the battery hack is it possible the battery is just way too low for this to work?
If you are on Windows 7 you have to start RSD Lite as administrator.
Hi mate,
I had the exact same thing happen to me at the weekend there and got it fixed, either read my thread or i`ll try to tell you what i done. I got to the same stage as you where rsdlite wasnt even recognising the phone, but i plugged it in by usb anyway and even when rsdlite didn
Hi mate,
I had the exact same thing happen to me at the weekend there and got it fixed, either read my thread or i`ll try to tell you what i done. I got to the same stage as you where rsdlite wasnt even recognising the phone, but i plugged it in by usb anyway and even when rsdlite didnt recognise it i pressed the start button anyway and it would flash then not reboot like yours.
Screen would say software updating and that was all. Finally i kept just plugging it in by usb(without trying to get into bootloader and rsdlite still not recognising it) and flashed the Rom that i was on before the errors and it all worked.
So maybe you should try flashing with rom you had on it to start with or the one that worked for me which was the PAYS rom.
Good luck
Mark
the only problem is that i dont know what rom i was on before i only had the phone 3 days before it bootlooped and quit working i hadnt even had a chance to root it or anything yet really so i think im just screwed on rsd i can hit start but it doesnt do anything when i do its acting like theres no phone connected at all
Mine looked at if it wasnt connected at all either, maybe try switching the power on while it is in usb and rsdlite is running, I done that and heard the usb connection noise but that was all i got, still black screen, but once I pressed start it said software updating. Maybe you will have to try all the original sbf till it says "updating software" and then hopefully once you pick right one it will reboot too.
Only thing I can think of is did you remember to start rsdlite with administrator rights? And maybe the sbf you need to flash is an older one?
Mark
hackulous said:
ok i tried everything you guys just said my drivers are up to date im using rsd 4.9 and im trying to flash the leaked tmo us froyo rom so it should fix it but the problem im facing is that the white light is no longer coming on and rsd is not showing it as a device but its in my computers devices and the only way it shows on my computer is if i use the mcgyver hack which makes me feel like the battery is dead so im going to try holding volume up before i put the battery in with the wires connected but all else is failing for some reason
edit: it didnt work im at a loss now i think i own a 400 dollar paper weight i just dont understand why rsd wont register it and the light blinks briefly when i hook it to the computer with the battery hack is it possible the battery is just way too low for this to work?
Click to expand...
Click to collapse
When you brick your phone, it won't load the batt any more. I've seen peepz loading the batt directly connected to the batt charger by cutting of a USB Cable. If you got a friend with a defy, try his battery and then retry flashing. This should solve your problem.
Report back
Edit: here's a explain from a german forum: http://www.android-hilfe.de/root-ha...-nicht-nur-weisse-led-rsd-erkennt-nichts.html
im already using the mcgyver hack im going round 83 with this thing it just showed up on rsd not sure why but im glad trying to flash now but it keeps saying failed and it wont let me flash the leaked tmo us froyo at all the start button stays gray but its trying to let me flash other stuff maybe my downloads are bad not sure redownloading now
edit: ok found a way with command line to get the start button back but obviously its not running as administrator because it isnt reading the phone im afraid to unhook the phone for fear it might not come back looks like im on the pc for about a day
It sounds a bit like my problem, maybe it wont flash the tmo froyo, i`d maybe keep it hooked up to the pc and try all different sbf to see if one works.
ok i have to run as admin to see the phone but using command line to force the program to accept the file means it wont show the phone because its not running as admin this is the last time i ever buy or use a motorola product why the hell do they lock bootloaders?
the only thing its letting me flash is the uk 2.21 and then it brings me back to square one black screen idk what to do anymore man this sucks
So when you run as administrator it shows your phone in rsdlite? thats a good start. Once you flash the uk 2.21 does it try to reboot or just go into black screen?
Mine just seemed to go into black screen then for some reason it worked on one of the sbf.
If ur case is that serious then just flash one of leaked european froyo sbf. Don't flash chinese. Make sure u charge it before. Wipe after flashing by going into stock recovery.
Sent from my MB525 using XDA App
ok i got it to work on the 2.2 leaked orange deblur that solved it but now my phone will only come on if im using the mcgyver battery hack so i cant take it away from the computer making it much less useful could this just be that i need a new battery now if so thats a cheap fix
edit: im an idiot the phone was on 0% battery life plugged into the wall its charging im fixed thanks to you guys this community is the best
Glad to see you got it sorted mate.
Swoooosh. . . U solved it .
Sent from my MB525 using XDA App
I seem to have the same problem. Can you explain what you did to have your phone fixed!
Thanks
Disclaimer:
I have the same problem this guy have:
http://forum.xda-developers.com/showthread.php?t=1036327
But no one in the thread was able to understand him, so I'm trying to open a new thread to organize the thoughts (there are too many people with too many problems posting there).
What happened:
I have a 1-month-old Defy. On the 2nd day I already had it rooted, running froyo (with Pays ROM), overclocked, undervolted and all this stuff. Three days ago, suddenly, it started to FC apps randomly. So I wiped. Then it became stuck on M logo. No big deal.
I tried then to reflash the SBF via RSDLite, but for some reason I only had the previous SBF (3.4.2-155-2) and my phone was running on 3.4.3-11. Don't know if it has downgradeability issues, but I couldn't flash it. It threw some checksum errors in the process and wasn't able to finish the process. Then my phone became "Code Corrupt". I was still able to see it in RSDLite. No big deal.
I didn't know the battery wouldn't charge in the bootloader screen, so I quickly ran into a "Battery Low / Cannot Program" state. It was written in the screen what happened. I knew what I had to do. No big deal.
I read about the MacGyver method, but prefered instead to use a universal charger to charge my battery. Was charging all night, seem to work on other defy (tested it later). But, now, my phone makes no response to battery insertion. Not even power+vol up, nothing. No white led, no bootloader, no code corrupt, no nothing. Ok, that's a big deal.
If I connect it to USB, nothing happens. No driver instalation, no device recognized, no RSDLite, no bootloader, no white led. Nothing.
The only response I have from the phone is: if I pull the battery and put it again while connected to USB, the computer will make an USB connection sound, then 2 seconds later, it makes an USB disconnection sound. If I open the device manager, it shows the Motorola Device for 2 seconds (OMAP something) and then it desapears. So I'm not able to see it in RSDLite.
I tried even to power up the phone with the MacGyver-crafted USB cable (with and without battery inserted together), but the computer response is the same. That is the only thing that makes me believe that my Defy isn't entirely dead. But isn't much useful after all.
Hope I explained it well. I'm one of those guys who doesn't speak english well, so I hope you guys understand me . Thanks in advance.
I would really like to be helpful, but it looks, that you tried everything. Only one thing. Try to check the battery voltage and if you can, try another battery in your phone. The charger could broke your battery, even if it one time worked in another phone.
Try reinstall usb drivers, rsdlite, different usb port, and different pc.
@peetr_
The battery seems to still work, as putting it in the phone makes it to be recognized (for 2 seconds) on the PC. Also, the phone seems to get a little warm while with the battery.
@ABC_Universal
I tried. Installed all the drivers in another PC I have here and tried the same methods I said before. Same results.
If you're planning to dumb the phone into a dumb site.. let me know when and where...
Ok... you need to narrow down the possibility here by putting another full charged battery and see if the phone do get connected status via PC. External charger might just toast your battery if you read carefully your entire story back starting from this line "I didn't know the battery wouldn't charge in the bootloader screen, so I quickly ran into a "Battery Low / Cannot Program" state. It was written in the screen what happened. I knew what I had to do. No big deal."
External charger might giving out totally different voltage/current rating from the defy own charger.
im having the same issue, did you solve it?
im having the same issue, did you solve it?
try putting a different Defy's battery, doesn't work just give it for RMA... you'll get a replacement. looks like a hardware problem to me...
You have tried the McGyver-trick?
I tried using another battery in it and didn't work. I was far from a computer when I tried, so I didn't check if I was able to connect it to PC (even if the screen was totally black). But if it was a battery problem, I was expecting at least the bootloader to appear, but still nothing happened.
I took it to RMA two weeks ago. Here in Brazil they take too long to return it =/. Still waiting.
skattegat: I tried. With and without battery inserted together. Both cases, I was only able to listen the USB connection start and end, 2 seconds later. I know the cable was working because even without battery, when I touch the wires, I was able to listen the usb connection sound.
Ok. At least you have the time now to enjoy your sunny weather in Brazil...
RSD lite sucks... Well it doesn't suck but it refuses to work anymore no matter what I do!
Use sbf_flash in linux and it should do the trick! PM me if you need help
First flash the sbf. Then enter stock recovery and do the recovery from there. Flashing does not wipe cache. But after the flash the recovery will do the wipe automaticly.
Sent from my MB525 cm7quarx
Just a follow up:
My phone returned today from the warranty. Is fully working now, but I noticed the IMEI has changed. So I guess they changed the entire circuit.
It's not helpful for those who have the same problem, but I'm happy again
i have problem too..
I made a mistake in ROM CM7: I "install the 2nd init". and the results stuck on the boot logo .. : (
I finally went into the boot loader, then flash again use 3.4.2_177 SBF-005_NORDIC (do not wipe the data) .. remain stuck at the boot logo. and I try to use flash SBF-Stock.UKTmobile 3.4.3_11 (not wipe the data) and the results .... still stuck>> it's just an animated logo appears only.
AND THEN ---------------------------------
for this case:
I want to get into stock recovery:
1. defy turn off, turn the power button + volume down (hold a while)
2. logo appears>> android +! (the menu does not appear anything)
3. and I do not know anymore what should I do: (
please help me Quarx
thanks before
Don't see why you should ask the same question in multiple topics. My answer still is the same:
If pushing the lower right corner doesn't do the trick, try instead pushing both volume buttons at the same moment. Worked for me
Sent from my MB525 using XDA App
Fotogravin said:
Don't see why you should ask the same question in multiple topics. My answer still is the same:
If pushing the lower right corner doesn't do the trick, try instead pushing both volume buttons at the same moment. Worked for me
Sent from my MB525 using XDA App
Click to expand...
Click to collapse
it's work..!! sorry i ask same question on other thread.
i'm so confuse
makasih gan
hey omneon are you able to solve your problem..plz help me man mine defy is stuck on m logo. same problem like your..
I am currently trying to fix a friend's Xperia Play r800a. It seems to be having a few different problems and together they are making it all difficult to get it going again. First off I have no real knowledge of toying with an Android phone. I browsed some threads on here, used Google and tried to use Flashtool to get the original operating system on it but all were a no go. I'll try and describe the problems to the best of my abilities and maybe someone can offer some help.
This is what I know from what he remembers he did to the phone. He said that the phone started t only boot to the Sony logo and then it would hang until the battery died or the phone was reset. If plugged in with a wall charger then it would allow him to get to the screen where he would enter his password but the touch screen wouldn't work. He then flashed it using Flashtool and at that point it would boot to a black screen and that's it.
-It hangs on a black screen, no logo or anything is present and it happens regardless of whether it is plugged into a wall charger or not.
-It is not found when plugged into the USB port (Windows 7 PC) and shows up as an unknown device. After a few minutes it is found by the PC but sometimes will randomly go back to an unknown device.
-I sometimes get a red light which blinks three times when I press the power button on the phone. I am currently charging it to see if it was a matter of being a dead battery or something worse (I heard it could be a hardware failure).
Any suggestions would be appreciated.
My Xperia Play has done This I asked a Mate (Jinx13) He said Il do a hardcore Testpoint process. After I have done this My Phone will Vibrate and Nothing I was Playing Rayman today and it Locks and Hardware Keys Do Not respond.
Then Touchscreen Stopped Working. Indeed This is a Hardware Failure I have got this and Re-Flashing with Blinking SETOOL2 and Resseting it Wouldn't work. I Then Re-Locked By fastboot SIM and Bootloader (Maintained DRM) and Now Dowloading R800i O2-UK From SETOOL Support and 3-UK one and I will Upload them for US people for Warranty they Become indeed handy . I now Am Going to O2 shop I was Running 2.3.4 .42 GENERIC.But I am Not allowed to Give you the FW's Only by Re-Uploading I Can. Anyway My Brave Soldier Died (Hardware Failure) Its the Screen Components.Im Not Rooted anymore and Re-locked with S1-Tool.
If this happens to you My advice is Dont Flash Alpha ROM's They can make Your device Coo Coo. And OC can Damage.
Basically I boot My phone with a 3600MAH Mugen Battery 89% Battery From the Last time It was on. Im afraid your friends Phone is Dead Maybe a Hardware Failure Most Likly and I am now Officialy Out of the Game.
But O2 Gave me 3 Year warranty!!!!! For £100 When I Purchased it. So I am Going to O2 in Stevenage and Say this What actually happend:
"I Purchased My Xperia Play on August 17th Through Online Store ; I have never had a Problem With My device Untill This week : I have had these Issues:
*Touchscreen Wont respond Cleaned Several Times.
*Random Reboots
*Red Light when Phone had 50%+ Battery
*Would Take 6 Battery Pulls to Turn on (Would Only turn on Earlier during the week)
*Lagged In games.
*Running O2 Branded Software
*No Screen Brightness or Signs of Working Screen.
*Would Not charge Unless turned On
*Camera Would Not work Unless Wifi Was not on I dont know why?
So Basically This Phone had a A fault since Day one I always had Camera Fails.
bluetoon said:
I am currently trying to fix a friend's Xperia Play r800a. It seems to be having a few different problems and together they are making it all difficult to get it going again. First off I have no real knowledge of toying with an Android phone. I browsed some threads on here, used Google and tried to use Flashtool to get the original operating system on it but all were a no go. I'll try and describe the problems to the best of my abilities and maybe someone can offer some help.
This is what I know from what he remembers he did to the phone. He said that the phone started t only boot to the Sony logo and then it would hang until the battery died or the phone was reset. If plugged in with a wall charger then it would allow him to get to the screen where he would enter his password but the touch screen wouldn't work. He then flashed it using Flashtool and at that point it would boot to a black screen and that's it.
-It hangs on a black screen, no logo or anything is present and it happens regardless of whether it is plugged into a wall charger or not.
-It is not found when plugged into the USB port (Windows 7 PC) and shows up as an unknown device. After a few minutes it is found by the PC but sometimes will randomly go back to an unknown device.
-I sometimes get a red light which blinks three times when I press the power button on the phone. I am currently charging it to see if it was a matter of being a dead battery or something worse (I heard it could be a hardware failure).
Any suggestions would be appreciated.
Click to expand...
Click to collapse
okay lol i don't know if that second post helped but is the phone unlocked? by any chance if it is, you can never really brick your xperia, from experience i kept flashing re flashing cusom kernal all day i get the same loops etc, but always fixable, also flash tool should fix your phone if that is you got the right ftf file for the brand like i have verizon and it have a verizon.ftf file, other than that i need more info about the phone not how it bricked, like what was it running at first etc. Try sony software reflashing repairing if that doesn't work use flashtool and see if you get an error with that
I cant enter fastboot or recovery lol
Xperia4life said:
I cant enter fastboot or recovery lol
Click to expand...
Click to collapse
lol xD oh danm only possible way i think is to try flash tool and downloading the ftf file for your phone and let me know if you get any errors
biggyhead said:
lol xD oh danm only possible way i think is to try flash tool and downloading the ftf file for your phone and let me know if you get any errors
Click to expand...
Click to collapse
my phone is having the exact same problem, it wont recover through pc companion and flashtool wont even work cause I cant get my phone into flashmode.
are there any other tricks that might get my beast running again?
NevErSn0w said:
my phone is having the exact same problem, it wont recover through pc companion and flashtool wont even work cause I cant get my phone into flashmode.
are there any other tricks that might get my beast running again?
Click to expand...
Click to collapse
How are you trying to get into Flashmode?
Sent from my Slider SL101