Hye guys, I've searched everywhere looking for a way to actually change the speed dial number for voicemail.
Currently theres an entry as number 1 as Voicemail but there is no number attached to it. When I try and edit the number I'm not able to add an number, it has a drop down menu but it's blank and I cannot input a number into it.
I tried deleting the speed dial but then I'm unable to add a speed dial to number 1 as its reserved for voicemail...
I checked in Phone -> settings -> services and Voicemail and Text Messages has the right number for voicemail (121)
edit
using Black 2.0 with radio 1.38
thats because it hardcoded into the OS. the only thing you can do is set another speed dail number to your voicemails number and use that but 1 is always for voicemail sorry man
austinsnyc said:
thats because it hardcoded into the OS. the only thing you can do is set another speed dail number to your voicemails number and use that but 1 is always for voicemail sorry man
Click to expand...
Click to collapse
Nope not quite...
You can change it by going to settings-Phone-Services tab. It should be there with the Text MEssages Services Centre number.
I was able to edit mine when I tried YouMail. Not to mention how would these bad ass speedy cooked rom-a-lama-ding-dongs work?
X
xultar said:
Nope not quite...
You can change it by going to settings-Phone-Services tab. It should be there with the Text MEssages Services Centre number.
I was able to edit mine when I tried YouMail. Not to mention how would these bad ass speedy cooked rom-a-lama-ding-dongs work?
X
Click to expand...
Click to collapse
sorry your right forgot about that.
Hmm
Well in phone -> settings -> services -> tect messages and voicemail the right numbers are there but the voicemail just seems to be missing from the phone
I'll give it a hard reset and see how it goes
If there is nothing registered in speed dial position 1 from before, isn't it just to push the square nr. 1 and enter it from there?
edit: that is the square no. 1 in speed dial menu
THis may be a newb question, and i had it set up somehow while running WM2003 but i cant seem to remove the brackets on the numbers that are calling me, so i have to redo about 400 contacts just so that i can get their name on screen while they are calling me
Example:
The phone now whenever someone is calling me it shows (697)6767676 and i want to make it 6976767676,
Help!
dont fret and worry about it...
it's just a display (it's hardcoded in Windows to show the first three in parenthesis) ... the real numbers dont have the any special chars aside from p w +, et. al.
Yes i know its only a display thingamajig, although whenever i get a call from someone it wont show me their name unless i have altered the actual number with so that it contains the brackets in the contact itself :S
dumraden said:
Yes i know its only a display thingamajig, although whenever i get a call from someone it wont show me their name unless i have altered the actual number with so that it contains the brackets in the contact itself :S
Click to expand...
Click to collapse
None of my contacts have ( ) stored in their numbers, The format I used is +country_code number and every time someone calls me with or without the country code showing it displays the name that corresponds. Example: I have have a contact named Fred Murphy with the number +965 1234567 when he calls if I am in Kuwait it shows only as 123-4567 if I am overseas it shows as +965 123-4567 both times I see his name Fred Murphy on my screen. It has always been this way for me no matter which version of windows I have run. I was not aware that it worked any other way.
You have to choose your regional settings correctly and it will disappear.
settings > system > regional settings.
JP
or
check for duplicate phone number entries...
even though you have the name in the sim and the phone, the phone cant decide which name to show, so our phone shows only the number.
Hello,
I been searching to figure out how to add a pause between phone number and conference ID/extension. I've tried adding a comma (,), "p", and period (.) without success. Tried by adding this to a contact's phone number - such as 555-555-1234pp123456# or 555-555-1234,,123456#, etc.
Does anyone know of a solution? Is this a limitation in Windows Phone in general or is this OEM specific?
Thanks for your help.
Add the contact using Windows Live, Outlook, or however else you can add commas and still have it sync, then it works.
ie:
mobile phone
(800) 555-8355 ,2548
Add more commas if needed.
Is there anyway to add pause to voicemail number ? i hate entering the password everytime ..
trueblog said:
Is there anyway to add pause to voicemail number ? i hate entering the password everytime ..
Click to expand...
Click to collapse
Before you do this, read the Last Paragraph.
1. Go into your settings and then Phone Settings and write down your Voicemail number. Be sure to copy it exactly, including spaces.
2. Open Office on your phone and start a new Word Document. Type your Voicemail number exactly as you saw it.
3. Add a p after the number and then type your password. Now, highlight and copy this new number.
4. Go back to your phone settings and paste this new number including the p and password.
5. Back out and see if that worked. If you have any trouble, put the old number back into phone settings.
I'll change numbers so you don't have mine, but here's an example:
+1 (415) 497-1234p1234
This works on ATT. We also have an option to bypass password completely within the Voicemail settings menu after calling voicemail. On ATT it's option 2, then passwords, then turn off password.
Hey what i did was just type the number in a text editor and pasted to contact detail.. it worked
Hi all, just a strange issue I am having I hope you can help me. I noticed when dialing by name when new, this phone kept wanting to bring up the home number when I want to dial the mobile by default. So, I headed into the contacts and discovered I could set the "default" number by either long pressing the desired number and selecting "set default" which then puts a blue check mark next to it, or I could be in the contact, press menu, then "mark as default" which opens a window where I can select the default email, phone number, etc which also will put a blue check next to the number.
Now then, all my contacts are stored on Google, nothing on the phone or SIM itself. For some reason, the default number for one of the most frequently called people in my address book will not "stick". I mark it as default, I can dial by name and it shows up correctly, but then the next time I go to do it (sometimes even 5 minutes later), it will be back to having no default number set and gives me the home number instead of mobile.
Oddly enough, the three other numbers I marked with a default number never do this to me and work every time, only the one contact entry doesn't work. I can't think of any other reasons why this is happening. My ONLY thought was that for some reason when syncing, Google keeps over-riding the marked default number. But why would it do it for JUST this one contact and not the other 3?!
Any ideas? Looking forward to thoughts. Kind of an embarrassing problem since it's so simple, but I can't figure it out...
www.google.com/contacts
Do you have more specific of a suggestion than simply giving me the site which I have already been to a couple times? The Google contacts interface doesn't seem to support "default numbers" and there is no way I could find to set a default number via the web interface. I believe the default number is an "on phone" setting. Thus, I am confused why it works on some contacts and not all.
Update: I noticed this same contact also won't upload changes to phone numbers, addresses, etc made on the phone for some reason, so this could be more of a Google sync problem. Again, it's only this one contact.
If I make changes to other contacts, they are reflected on Google's servers correctly. If I make a change to the phone number of this specific contact, after a few minutes, it goes back to what it previously was. It seems it's always pulling down from Google's servers and replacing the changes I made on my phone. It's like somehow only this contact was set to only pull down information, not upload it also. I also could not find any settings for changing the location of the "master" when there are changes or conflicts or anything like that on Google's website.
Anyone else have any suggestions? Thanks in advance.
Bump to the top, still have this issue.
Not much help here, as I'd love to know how to do this at a higher 'Google' level than just on my phone too. Are you syncing contacts with any other applications? For example, Facebook?
No, it's a stock Galaxy S4. Although you bring up another question I have had. When I have my contacts on Facebook synced "only with existing contacts", friends on Facebook still show up when I try to dial by name even though they do NOT show up in my address book. What's up with that? Is that the fault of Facebook? I seem to remember my HTC phone doing this as well, so I disabled syncing with Facebook contacts completely.
Today I tried removing the Google account, clearing the data and cache for contacts and contact storage, then adding the Google account again and letting contacts sync. I then set default numbers for 5 phone numbers. 10 minutes later, all but the one contact I have had problems with still had the default number set. The one contact cleared the default number - again. I just don't get it...
02CWRX said:
Hi all, just a strange issue I am having I hope you can help me. I noticed when dialing by name when new, this phone kept wanting to bring up the home number when I want to dial the mobile by default. So, I headed into the contacts and discovered I could set the "default" number by either long pressing the desired number and selecting "set default" which then puts a blue check mark next to it, or I could be in the contact, press menu, then "mark as default" which opens a window where I can select the default email, phone number, etc which also will put a blue check next to the number.
Now then, all my contacts are stored on Google, nothing on the phone or SIM itself. For some reason, the default number for one of the most frequently called people in my address book will not "stick". I mark it as default, I can dial by name and it shows up correctly, but then the next time I go to do it (sometimes even 5 minutes later), it will be back to having no default number set and gives me the home number instead of mobile.
Oddly enough, the three other numbers I marked with a default number never do this to me and work every time, only the one contact entry doesn't work. I can't think of any other reasons why this is happening. My ONLY thought was that for some reason when syncing, Google keeps over-riding the marked default number. But why would it do it for JUST this one contact and not the other 3?!
Any ideas? Looking forward to thoughts. Kind of an embarrassing problem since it's so simple, but I can't figure it out...
Click to expand...
Click to collapse
I have the same issue and it ticks me off every time, and it happens with any contact that has multiple numbers. There doesn't seem to be any way to choose the alternate numbers when you do search by name from the dialpad. you have to do it from the favorites or the contacts tab instead.
Does yours clear the default from EVERY contact that has multiple numbers? Mine only clears the set default number from ONE SPECIFIC contact, and I can't figure out what the difference between that contact and any other contact is. Or, if you are saying you can't figure out how to set the default numbers at all, I gave instructions on how to do it two different ways in the post you quoted.
As for selecting an alternate number from the dial pad, I figured that out too. So, let's say you want to call Mike. Dial 6453 (MIKE) and you should see the name pop up. To the right of the name is a down arrow with a number above it. The number is telling you how many contacts what you have dialed matches. Tap the down arrow and you will see a list of people and their numbers under them (or just the one person if that's all that matches). If you tap again on the name, you will in fact be given a choice on which number to dial (assuming the contact has more than one number saved for them).
So basically, it's a long annoying process that shouldn't have to happen, but it is possible to do it. You have to start dialing by name, then make a screen selection, then another selection, then another, then finally the dial pad is pre-filled with the number, but then you have to remember to hit the actual call button at the end of all that crap. I find it's easier to find a text from the person and swipe the screen to dial them that way sometimes (or from within the text tap the call icon), or from the call history tap the call icon. Or of course as you said, favorites or contacts.
My HTC used to just let you dial by name, tap the number you wanted, then it would start calling. Easy peasy.
Bump to the top again... Still trying to figure this out. So annoying.
Bump. I dial this number every day...
Some stupid questions: 1. Do you have more than one contact details of the same person? 2. Did you delete and re-add the contact. Also delete from all other syncs?
Sent from my Nexus 7 using Tapatalk 4 Beta
The contact is only listed as a Google contact, and has no other links or connections from other sources. Facebook is not synced, nor is anything else. It's only Google contacts. I haven't tried deleting and re adding yet. I guess that's a simple thing to try, its just that there is a lot of info in there, haha.
Ok, via web browser on the PC I exported the contact, deleted it, and synced my phone. Contact was gone. I then added a contact via web browser, typed in all the same info, synced the phone, and the contact is back. I then selected the mobile number, marked it as default, synced the contacts again, and there was no longer a default check mark next to the mobile number.
I have at least 3 other contacts where I don't have this problem at all. They are all stored on Google, they are all friends on Facebook (even though they aren't linked to FB in the contacts because of the above listed problem where everyone on FB shows up when dialing by name), they are all in circles on Google Plus. I can't figure this out at all. What the heck...