When I receive calls the dealer name doesn't appear, just the telephone number.
I am absolute sure that I don't have the same number with two different names in my list of contacts.
How can I solve this problem?
Is there Maybe a Country ID at the front of the submitted phone number which you don't have in your Contactlist, or maybe the other way round?
Hi
Are you using a customised ROM. If so you can try changing the amount of digits that the caller ID recognises in the Advanced settings.
Depending on what ROM you are using this can be in different places. But of the ones i have used it will be in either Start>Settings>System, or Start>Programs>PDA Settings
Cheers Dave
I have entries in my contacts as follows
555-555-1212pp1pp456789
Dial the number and then get through the system to get info. I programmed this in the contact list same as I had in my P4000 but I find that the last 6 digits dialed are so fast that the system cannot get them all and it craps out.
Is there any way to slow down the dtmf tones when it dials out???
Thanks
Hi,
Is there a way to have the incoming call display identify which number of a contact is calling - for example, I have two numbers in the same contact for someone, mobile and work. When she calls, it just says the person's name and photo , rather than Name - Work or Name- Mobile.
Short of splitting it into two separate contacts, do you know if displaying the 'type' (or number) is possible?
Thanks
It is showing the number for me. I have some contacts with 3 or 4 numbers in them.
People, here's the thing.
Here in Brazil, when a call is received, the caller number is sent to the phone in this format:
0 + area code (two digits) + caller number (eight digits)
For example, 0219236XXXX
My Galaxy Nexus gets this number and shows it in this format:
(21)9236-XXXX
This is one of the brazilian ways to present a phone number here, "(" + area code with two digits+ ")" + four digits + "-" + four digits. There are others, for example without the parenthesis (like this: 21 9236-XXXX).
The problem is that when I enter the call log to return a call, if I return it from an incoming call register, it works fine. But if I return it from an outgoing call register, the call is not complete because the number is not recognized.
It's hard to explain, I'll try to illustrate with steps.
- I receive a call from 0219236XXXX
- My Galaxy Nexus call log shows:
(21)9236-XXXX "call received" (a small blue arrow pointing down left)
- I enter call log and press that "call received" register
- The phone dials (21)9236-XXXX and the call is completed
- My Galaxy Nexus call log now shows:
(21)9236-XXXX "call made" (a green blue arrow pointing up right)
(21)9236-XXXX "call received" (a small blue arrow pointing down left)
- I enter call log and press the "call made" register
- The phone dials (21)9236-XXXX and the number is not recognized.
- But if I press the "call received" register, the number is recognized and the call is completed.
See what I mean? I guess that in an incoming call, the first '0' (zero) is there, but it's hidden. So when I dial from the incoming call register, although the number is shown (21)9236-XXXX, the dialed number is 0219236XXXX, which is a correct number to the network.
But when I dial from the outgoing call register, the number is shown (21)9236-XXXX and the dialed number is 219236XXXX. The '0' (zero) is discarded. Because of that missing '0' (zero), the number is not recognized by the network.
I don't know if this is a problem only with brazilian phone number format, or if it happens in other countries also.
Is there a way to fix this? Because of it, most of the times I have to edit the number before calling it.
Bump!
Anyone?
i don't know about in brazil,
here in uk, it works with no problem. it even tell you where the area of the number is from.
for example i just received a unknown insurrance call from
01515246303
it show in the call log
0151 524 6303
Liverpool
and i can dial back with no problem.
qwerp_ said:
i don't know about in brazil,
here in uk, it works with no problem. it even tell you where the area of the number is from.
for example i just received a unknown insurrance call from
01515246303
it show in the call log
0151 524 6303
Liverpool
and i can dial back with no problem.
Click to expand...
Click to collapse
Have you tried dialing back from the outgoing call register?
Phantom1275 said:
Have you tried dialing back from the outgoing call register?
Click to expand...
Click to collapse
yes, it dials with the 0 with it.
I have the same problem, nexus in Vivo carrier, everytime i try to dial last call it wont recognize the number, then i have to edit the number, its really annoying.
Yes i have a similar problem
Here is what i have noticed
Im in oman, country code +968, when im in my home country and dial a call to uae, +971 567 897070, the dialer shows 056 7897070.
What i think happens is as follows,
Since the location setting if english uk, the phone formats the numbers as per uk formatting. They use 10 digits as their numbers.
The ics reads and displays numbers in UK first every where. Im ginger bread, that formatting used to happen only while entering the phone number in the dialer, but it would read and display more than 10 digits while on the same UK setting.
My advice for the brazilian numbers, is change ur location to uk from usa if you are using english.
I hope they fix this bug
Sent from my Galaxy Nexus using XDA App
Number formatting problem
in iran my galaxy nexus have problem with number formatting too.
sometimes seprate the number (this format: +98 123 456 7890 or 0123 456 7890)*
but sometimes auto format not work (this format: +981234567890 or 01234567890)
or only seprate -with country code- numbers.
important, when i saved a number with one of formats and then my phone automatically changed his formatting to other format then my numbers shows like unsaved numbers (without name) in log, callin and text.
text, log, dial pad and new cantact page have this problem.
Y sgn automatically change formatting?
how i can solve it?
after resetting, default format is the first one (*).
Does anyone else have the same problem when recieving an incoming call you get extran digits after the number like ol63 or something like that my phone doesnt recognice number even though person is in contact list cause ro the phone its a new number
Sent from my Note 3