Develop Bugs

Change Splash Screen in WM2006 / Favorite Rom / Programs

Hi,
- is there any way in WM2006 to change the splash screen? Any tools for it ?
- What's your favo rom, PDAViet Black & Blue 4.7?
- Favorite programs ?
Thanks,
Innovator

WM5Storage
My absolute favourite tool is WM5Storage. You can use your phone like an USB-Stick and i use it daily...
Are you searching for such a tool ? http://forum.xda-developers.com/showthread.php?t=317726&highlight=Splash+Screen
Cheers
Peter

Hi Peter,
Thanks for the reply, the problem is that I always get stuck after running the USPL tool, it goes to 100% then I see the Linux Pinguin screen, then i hear the 'disconnect' sound in vista, the rom flash utility starts, and then error 260 not connected. I suppose the USPL is not finished when the dos screen is finished, without ending the rom upgrade utility?
After the dos screen I also tried to plug out/in the usb cable, on the black screen, and start the rom utility manually to finish the USPL process, but no luck...
I tried the bootflash utility after the pinguin directly, but no luck either.
Searched the forums for likewise problems, but found no real clear solutions. Can anybody help me here?
Thanks in advance,
By the way, coolest bootscreen ever seen with earth

.... try
Have you hard-reset first? - Works great, and offen eliminates a lot of different problems (ore did for me anyway)

just tried and it's working...
to be honest.... i never tried to change the splash screen before, i just found the link about it....
But then i tried right now to change the splash with this tool, i first ran USPL and then when the phone was started again i could
upload my own splash screen with the replacement tool. Everything worked fine... no idea what went wrong on your device...
But i have also a question: is it possible to change the second logo and the windows-starting logo also ? How to do ?
Cheers Peter

Android on Omnia 2

All credit to 'Rufik'
Everything in it is prepared to boot Android straight from SD Card & internal memory - no need to make linux (ext2/3) partition at all. Quick guide:
1. unpack files and put haret.exe, zImage, initrd.cpio.gz, default.txt into root directory of your Omnia's SD Card (Storage Card)
2. put rootfs.img into root directory of your internal memory (My Storage)
3. run haret.exe and click "run"
4. you should see damn small haret's fonts, crc checking should pass with success, haret will jump into kernel
5. now kernel is booting, many messages and logo are visible. I've set a 10sec delay before mounting root filesystem, so you can see message that mmcblk has been found and partitions printed out
6. any failure within kernel booting ends up with kernel panic and phone restart after 30 seconds
7. successful booting results in some long-last message and "android" animation
8. in minute or two you will see desktop
rapidshare.com/files/381541433/andromnia2_alpha_pack.zip
modaco.com/content-page/298997/android-on-omnia-2/page/700/

Just tested this ... booting very nice ... a very nice start but still need a lot of work but a very nice begining..
Keep up the good work

fireburn said:
Just tested this ... booting very nice ... a very nice start but still need a lot of work but a very nice begining..
Keep up the good work
Click to expand...
Click to collapse
do you have the usa version omnia 2. i just tried putting it on my i920 and got it to load up but that was bout it. only displayed in landscape mode and keep switching between linux boot up and android home screen... any help???

nop european version (Portuguese).. it seems to work very well for an alpha version .. screen flicker and some programs that dont work ... but android is booting ...

dac2009 said:
do you have the usa version omnia 2. i just tried putting it on my i920 and got it to load up but that was bout it. only displayed in landscape mode and keep switching between linux boot up and android home screen... any help???
Click to expand...
Click to collapse
That's all that's working at the moment. Hopefully phone and data wont be too far away.

Could you upload to other website. it's getting stuck on 20% everytime

try going to modaco .. theres more links there

Very nice.. i have tried it.. very nice

Omnia 2 is the same like samsung jet S8000?

the samsung jet and the omnia2 have nothing in common they only seem a like...

Omnia on B7610 OmniaPro?
Hello,
Does anybody know if there is any work arround about putting Android on OmniaPro B7610?
Thank you for your answers.

sener said:
Hello,
Does anybody know if there is any work arround about putting Android on OmniaPro B7610?
Thank you for your answers.
Click to expand...
Click to collapse
It's working on mine, just follow the instructions provided and you're all set

so are all the buttons mapped correctly? and does WIFI, GPS, Market, standard-phone functions working?

on the omnia i920 I have android running..only problem is none of the buttons are mapped correctly. There is no Wifi. I'm not able to make calls either. Basically it's a visual goodie for now. I read on Modaco that they have the GPS working I think. It doesn't work on mine however. There is no sound either. I really hope someone can get this working fully because from what I seen it's a sweet os.

theres still a lot to be done ... the project is beeing directed by a guy named almar ...theres a lot of development to do on the drivers ..

two o/s
can work 2 os win&android

we need to get some devs on here to help out almar is one guy and he has done great but he seems busy with life and i think is in exam period. So if you guys know any devs that know android i think we should be able to help him out with drivers.

Hi,
I have Samsung B7610. I tried running the package, Everything appeared as mentioned. I think the buttons are not mapped. It does not detect the network.
I feel at the present stage, it cannot be used for normal telephony.
But, would like to thank for providing this oppurtunity, I am happy to see Android on my phone.

any updates on android for omnia II ?

Mikomi said:
any updates on android for omnia II ?
Click to expand...
Click to collapse
same question.. is there anything new developed?
cheers

ReCalibrate Screen, Edit Startup.txt - Android on TP2

I have a fresh install of Android on my HTC Touch Pro 2.
The install went fine thanks to TheBrilliantMistake's Tutorial.
The only thing I messed up was was calibrating the touch screen because I had never done a calibration like that before before. The touch screen function seems to be rotated 90 degrees to the right as far as I can tell.
I have entered the following line --
recalibrate=true
-- into the startup.txt a couple of different ways and I have had no success. I either get an error or Android just boots up with the touch screen all messed up again.
Android Rel 2.1 on WinMo 6.5
Can offer any other suggestions?
Thanks.

Missing setupmodem.sh
In order to get the phone to ask for calibration on boot I deleted the ts-calibration file from the root of the directory where Android is installed.
No changes to startup.txt where needed.
It's spot on this time...
Another problem:
On boot I can see this output "init: Cannot find setupmodem.sh Disable modem" and then when I do search for available networks in Android I get nothing, it just searches forever until I stop it. As a result I can't use my phone as a phone in Android..
Where can I find a copy of setupmodem.sh ?

Just wondering why you used Brilliantmistakes version for the TP when there is a TP2 version that already comes calibrated, with a startup utility that allows you to pick what handset you're using, a update utility that lets you update your zimage/modules/initrd/rootfs from the handset, auto backlight WM controller, and an apk manager...... oh, and did i mention you can pick from 3 different builds of android?
http://forum.xda-developers.com/showthread.php?t=627997

reefermattness said:
just wondering why you used brilliantmistakes version for the tp when there is a tp2 version that already comes calibrated, with a startup utility that allows you to pick what handset you're using, a update utility that lets you update your zimage/modules/initrd/rootfs from the handset, auto backlight wm controller, and an apk manager...... Oh, and did i mention you can pick from 3 different builds of android?
http://forum.xda-developers.com/showthread.php?t=627997
Click to expand...
Click to collapse
lmao!!! 0wned!

ok now i got the andoris but how to.

ok guys now i installed the androis and its work well
but how can i upgrade my android to other rom andorids? i want wifi. gps. etc...
some good rom and how i upgrade?

and why if i reset my phone its go back to windows mobile ?
its like the windows vista? just program ? lol

RFOX100 said:
and why if i reset my phone its go back to windows mobile ?
its like the windows vista? just program ? lol
Click to expand...
Click to collapse
You must be using Haret to run Android. Haret reboots your phone into Android, which is on your SD card. It won't replace your Windows Mobile installation, cause it doesn't touch your NAND memory.
If you want Android permanently you'll have to flash your NAND.

oh ok lol got you. thanks but i instlled your androis version but it dotn have wifi. no gps. and i cant get to the sd c ard its says trial time over need to download new one or someting like that.

WOW i already mess everyting up . i want a nice theme and that my pc will reconize my android phone, i saw all the gouides but noting helps i installed everyting on my pc but still cant get into my phone as androis. i need 1 gouide or video that will help me do all.
please try to help because i really want android

Do this to mount it in windooze:
1. Boot into android, when the press central dpad to enter the installer or similar, do so.
2. Select recovery mode.
3. WHen it say press ok to exit recovery mode, plug the usb cable in.
4. Press ok, exit and let it boot.
After a while, the android phone will mount.
For SD Card Mounting, PM me for the link to the file(its warez). About GPS and wifi, you have to use a compatible build such as warm donut, super eclair, cm 5.0.7 test 3 port and SUper Hero that have wifi built in or as a wifi update. For GPS, use the new DZO's Kernel Or http://forum.xda-developers.com/showthread.php?t=660158.

LightNHB boot?could i use it on my diamond?

i want to use XDANDROID
i see a ROM which can boot android quickly,and my friend use it
its for touch pro only?
could i use it on my diamond?
LiteWM ROM to autoboot linux
LightNHB boot
MichyPrima has created a lite WinMo that automatically loads haret from your SD card. It loads pretty quick and i can confirm it works It has a boot option so just wait until you see Booting countdown and touch the screen.
Reboot, Shutdown, USB mass Storage and Continue Booting Android

i don't think so.

realloafer said:
i want to use XDANDROID
i see a ROM which can boot android quickly,and my friend use it
its for touch pro only?
could i use it on my diamond?
LiteWM ROM to autoboot linux
LightNHB boot
MichyPrima has created a lite WinMo that automatically loads haret from your SD card. It loads pretty quick and i can confirm it works It has a boot option so just wait until you see Booting countdown and touch the screen.
Reboot, Shutdown, USB mass Storage and Continue Booting Android
Click to expand...
Click to collapse
I believe he made this for diamond. But it flashes okay with the raphael. Do a search as i'm not 100% sure. but it should work

babijoee said:
I believe he made this for diamond. But it flashes okay with the raphael. Do a search as i'm not 100% sure. but it should work
Click to expand...
Click to collapse
could i try it on my diamond?What is the risk of it?