Develop Bugs

[Q] Stock T-Mobile Image and Baseband

Anyone have these yet by chance?

I am sure it is coming. I would like to get my hands on it also.

Would be nice to have as I've already screwed it up.

liquidblue1985 said:
Would be nice to have as I've already screwed it up.
Click to expand...
Click to collapse
did you flash the n7100 stock firmware?

JoJo2211 said:
did you flash the n7100 stock firmware?
Click to expand...
Click to collapse
Nope. Downloading that right now actually. The only issue I'm having is that it's not recognizing the baseband.

It would be nice to be able to flash the Tmobile modem.

gedster314 said:
It would be nice to be able to flash the Tmobile modem.
Click to expand...
Click to collapse
Yeah. I'm pretty much stuck at this point. I have a custom recovery installed, root and on an international rom but I cannot get cell service. Wifi works, but that's about it.

I believe it has to do with the isis security.
Was thinking about going to TMO and getting a non-isis sim card to try.
liquidblue1985 said:
Yeah. I'm pretty much stuck at this point. I have a custom recovery installed, root and on an international rom but I cannot get cell service. Wifi works, but that's about it.
Click to expand...
Click to collapse

+1 I need the modem or a stock tar to odin asap, hope it drops soon...

The non-ISIS sim card did not change anything.
Looks like I need the stock rom also.
:/
luser01 said:
I believe it has to do with the isis security.
Was thinking about going to TMO and getting a non-isis sim card to try.
Click to expand...
Click to collapse

If anyone can help out with getting a flashable radio for this it'd be greatly appreciated. I've looked around on how to extract the radio from the current version with no luck.
As far as the ROM, a user linked one here:
http://forum.xda-developers.com/showpost.php?p=33242968&postcount=67
I've restored that through custom recovery/nandroid and it works fine. But without the radio... I'm lost.

I get a MD5 mismatch when I try to restore it with nandroid.
Downloaded it twice. anyone else had luck?
liquidblue1985 said:
If anyone can help out with getting a flashable radio for this it'd be greatly appreciated. I've looked around on how to extract the radio from the current version with no luck.
As far as the ROM, a user linked one here:
http://forum.xda-developers.com/showpost.php?p=33242968&postcount=67
I've restored that through custom recovery/nandroid and it works fine. But without the radio... I'm lost.
Click to expand...
Click to collapse

luser01 said:
I get a MD5 mismatch when I try to restore it with nandroid.
Downloaded it twice. anyone else had luck?
Click to expand...
Click to collapse
Had the same thing. Best bet is to go into the md5 file with a text editor and just delete everything and save the file. Recopy the md5 file over and reflash. Not sure why it was causing this error because I even re-ran the md5's myself and they were the same.
Also, just got off the phone with Samsung, they pretty much said the phone is not in their system yet and they do not have access to the firmware at this point. Their suggestion was to go back to t-mobile and get an exchange unit.

I will try that..
I called Samsung last night and they gave me the same run around.
liquidblue1985 said:
Had the same thing. Best bet is to go into the md5 file with a text editor and just delete everything and save the file. Recopy the md5 file over and reflash. Not sure why it was causing this error because I even re-ran the md5's myself and they were the same.
Also, just got off the phone with Samsung, they pretty much said the phone is not in their system yet and they do not have access to the firmware at this point. Their suggestion was to go back to t-mobile and get an exchange unit.
Click to expand...
Click to collapse

Just hoping now that maybe someone with enough knowledge sees this and can extract a flashable baseband... I'd really hate to go and buy another unit.

liquidblue1985 said:
Just hoping now that maybe someone with enough knowledge sees this and can extract a flashable baseband... I'd really hate to go and buy another unit.
Click to expand...
Click to collapse
You should find a store with one on the shelf, and not much supervision... and root it/extract a nand image hehehe. Though that would mean you would have be able to do all that and I have no idea how to extract a baseband image that is the power of the xda dev gods!

How hard is it to extract a baseband image?
Could someone that has one do it easily?
MikeBrWade said:
You should find a store with one on the shelf, and not much supervision... and root it/extract a nand image hehehe. Though that would mean you would have be able to do all that and I have no idea how to extract a baseband image that is the power of the xda dev gods!
Click to expand...
Click to collapse

I'm not sure if this is what you're looking for in particular buuut...
http://forum.xda-developers.com/showthread.php?t=1954597
It was (and still is) posted on the N7100 dev forum. It's the T-Mobile boot.img in tar format. Read through the thread for more info.

That is for people that messed up the rooting.
I flashed a full ITL rom that had the modem in it.
All I need is the modem and I am good to go.
/Waits
anoneemooz said:
I'm not sure if this is what you're looking for in particular buuut...
http://forum.xda-developers.com/showthread.php?t=1954597
It was (and still is) posted on the N7100 dev forum. It's the T-Mobile boot.img in tar format. Read through the thread for more info.
Click to expand...
Click to collapse

luser01 said:
That is for people that messed up the rooting.
I flashed a full ITL rom that had the modem in it.
All I need is the modem and I am good to go.
/Waits
Click to expand...
Click to collapse
Oh so wait. You're using a T-Mobile Note 2 and managed to flash an international ROM with everything working and functional (except for signal/sms/data/call) ? No reboots?
I ask because I've been wanting to somehow "convert" my T-Mobile Note 2 to an international Note 2 (as in, be able to flash the updates the international version gets instead of waiting on T-Mobile). I'm not US based so I don't need it to work with T-Mobile SIM anyhow...

[Q] If I flashed GT-N7100 ROM, how can I get back?

First, I'm an idiot,,,got new to android,,had no idea about flashing,, so I just randomly picked a Rom, and turned out its a GT-N7100 ROM, now my phone has no signal at all,,, anyone know how to flash back ? or I have to wait a att ROM come out?
BTW, Im with Rogers.
Thanks:laugh:

your gonna have to wait till either someone makes a odin back with a stock rom or makes a stock rom you can flash via recovery.
EDIT: did you make a backup?

this reminds me of the following youtube video:
http://www.youtube.com/watch?v=wwleOote5M0
Can you give a link to the firmware you flashed? It'd be useful to know if it contained a modem and/or kernel (or not.)
If it contained a modem, you'll need another modem. If it contained a kernel, you'll need another kernel. We have those. Regardless, you'll need to talk someone into getting you a system image (someone that has the same phone as you and has already rooted.)
Also, do you have CWM recovery installed? Is the existing firmware (as trashed as it might be) rooted? Can you use adb?

im an idiot
garyd9 said:
this reminds me of the following youtube video:
http://www.youtube.com/watch?v=wwleOote5M0
Can you give a link to the firmware you flashed? It'd be useful to know if it contained a modem and/or kernel (or not.)
If it contained a modem, you'll need another modem. If it contained a kernel, you'll need another kernel. We have those. Regardless, you'll need to talk someone into getting you a system image (someone that has the same phone as you and has already rooted.)
Also, do you have CWM recovery installed? Is the existing firmware (as trashed as it might be) rooted? Can you use adb?
Click to expand...
Click to collapse
nope,, I didnt back up anything,,
heres the ROM link I used.
http://forum.xda-developers.com/showthread.php?t=1925402

...
I just opened the file you linked to.. it includes a modem, kernel, etc.
I know you won't be happy with this, but until an ODIN image shows up, you're kind of out of luck. If someone you know has the same phone, you could ask them to do a backup to an external memory card, and then you restore that backup to your device. Assuming the modem wasn't flashed when you installed, that would get you back into business. If a modem was flashed, you'll need to get someone to extract a modem (and I'm not sure how to go about doing that.)

garyd9 said:
Please answer ALL of these questions. I can't help you if you don't answer them all...
Does your phone work now, with the exception of connecting to the mobile network?
Are you familiar with adb? If so, are you able to get a shell via adb?
When you plug your phone into your computer, are you able to copy files to/from the phone?
Which custom recovery do you have installed? CWM recovery or TWRP?
Is your phone rooted? (it probably is with a custom firmware - assuming the phone works at all.)
Click to expand...
Click to collapse
sorry buddy,,,
right now, the phone has no signal, asking for a sim card, which Ive already inserted it.
noepe, I donno what adb is, I tried google it, but I think its too complicate for me.
I'm able to copy files into or from my phone( SD card)
i rooted my phone through this:
http://forum.xda-developers.com/showthread.php?t=1923956
donno if i successed,,, but it has a superSU on my screen after I done it,(guess it count as rooted?) and I may used the TWRP
thank you for your help....
now Im back to my old Iphone 4

I updated that post. Basically, I can't think of anything you can do right now.. until an ODIN dump is available - or if someone gets you a backup you can restore. However, a backup won't flash the proper modem (and it appears you also overwrote the modem.)

garyd9 said:
I updated that post. Basically, I can't think of anything you can do right now.. until an ODIN dump is available - or if someone gets you a backup you can restore. However, a backup won't flash the proper modem (and it appears you also overwrote the modem.)
Click to expand...
Click to collapse
so, if theres a ATT ROM avaiable in the future,,,I can use my phone again by flashing the ATT ROM?

callmejoe1 said:
so, if theres a ATT ROM avaiable in the future,,,I can use my phone again by flashing the ATT ROM?
Click to expand...
Click to collapse
Was the phone originally from AT&T or Rogers?

callmejoe1 said:
First, I'm an idiot,,,got new to android,,had no idea about flashing,, so I just randomly picked a Rom, and turned out its a GT-N7100 ROM, now my phone has no signal at all,,, anyone know how to flash back ? or I have to wait a att ROM come out?
BTW, Im with Rogers.
Thanks:laugh:
Click to expand...
Click to collapse
Welcome to club i've been here for 6 days... it's a crappy feeling especially when its your work phone :[

garyd9 said:
Was the phone originally from AT&T or Rogers?
Click to expand...
Click to collapse
with rogers,but I heard ppl say ATT AND ROGERS‘s ROM can be equivalent , are they ?

callmejoe1 said:
with rogers,but I heard ppl say ATT AND ROGERS‘s ROM can be equivalent , are they ?
Click to expand...
Click to collapse
Perhaps - perhaps not. Until one actually flashes from the other, we don't know. (Many will tell you that they've done it with a different phone model - my answer to that is simply that it was a different phone model. Until its tried with THIS one, we can only guess.)
I think the biggest stumbling block for you right now is the modem. We have a stock kernel and recovery. A "near" stock system partition image can also be made from another device with a simple command. I have to be honest, though, that I have no clue how to extract the modem from these LTE phones.
A recovery (and kernel) can easily be flashed with ODIN (or with dd from a rooted shell.) Same for the system partition (which is, basically, the OS.) Getting a system image might be annoying, as you'd need to find someone with a roger's phone to make it for you, upload it, etc.
The modem, however... I'm not sure how to go about getting that for you. I've never had to create a modem image...
If/when a ODIN package appears, you can use a program that will, basically, reflash your entire phone to stock. Modem, kernel, recovery, bootloader, etc. Everything. Normally, users wouldn't see those ODIN packages, but there are a couple of websites that have access to some samsung servers where they a put. Once they are put there, we can get it...
Take care
Gary

Mobiletechvideos. Have them Jtag it for you.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

Just me happy you don't have the note 1 if you would have made that same mistake you could have bricked your phone

envision said:
Just me happy you don't have the note 1 if you would have made that same mistake you could have bricked your phone
Click to expand...
Click to collapse
Yup your very lucky

I firmly believe you cna just flash your modem and kernel on top and it will be fine ,.
im hella busy this weekend but im sure we can get you fix withou a single $$ injected on your part

DAGr8 said:
I firmly believe you cna just flash your modem and kernel on top and it will be fine ,.
im hella busy this weekend but im sure we can get you fix withou a single $$ injected on your part
Click to expand...
Click to collapse
Looking forward to this remedy as this is the reason I am jumping from att Galaxy S 3 to the note2. Want my international dev community back!
Unfortunately so far down here in Southern Florida Miami beach there is no white Note 2 anywhere.

For those that have the ATT version of the Note 2, if you've mistakenly flashed the ROM, I highly suggest visiting your nearest AT&T Device Support Center. Since I've previously worked in those centers, they have a propietary Samsung flashing tool that allows them to flash to the stock ROM, even if it's rooted. Granted they'll be able to tell if you've rooted it or not (which may or may not void the warranty, depending on who you talk to), as long as the phone can turn on and go to firmware recovery mode, the flashing works almost 100% of the time and it's a free service.
However, as I got my Note 2 yesterday, I've contacted my nearest DSC and they said that they don't have the ability to flash the Note 2 yet and they may have that ability to do so in the next few weeks or possibly by the end of the year (if you can wait that long). Being that the associates are just corporate drones, if they can't fix it, they'll more than likely replace your phone under warranty (which I don't suggest since the replacements are refurbished, and besides you should be within the 14 day return period for a new phone).
Sorry if it doesn't help the ones who have the Rogers versions.

DAGr8 said:
I firmly believe you cna just flash your modem and kernel on top and it will be fine ,.
im hella busy this weekend but im sure we can get you fix withou a single $$ injected on your part
Click to expand...
Click to collapse
would you mind if you can post the link for the modem and kernel please?
thank you

DAGr8 said:
I firmly believe you cna just flash your modem and kernel on top and it will be fine ,.
im hella busy this weekend but im sure we can get you fix withou a single $$ injected on your part
Click to expand...
Click to collapse
Im having the same problem. I hope you can roll out a fix!

Request for a PIT file for NAND's Re-Partition

Does anyone can post a pit file for the Glide?
I think my NAND is corrupted.
Or maybe someone can tell me wich pit file could I use in order to repartition with odin my glide, or if there is another method to do this from the Dowload Mode.
Thanks.

Litatus said:
Does anyone can post a pit file for the Glide?
I think my NAND is corrupted.
Or maybe someone can tell me wich pit file could I use in order to repartition with odin my glide, or if there is another method to do this from the Dowload Mode.
Thanks.
Click to expand...
Click to collapse
I dont know much about that, but, i think that rogers version has different Partitions that ATT, Why? because a lot of user of the rogers version has freeze problem when they try to flash the recovery or a rom (i was having that problem) maybe the users that still has that problem (mine is solved, don but i dont know)

For what it's worth, I have a Rogers' version of the phone (it's apparently the "international version") and have had 0 problems flashing, etc. Never had to use a PIT.

terinfire said:
For what it's worth, I have a Rogers' version of the phone (it's apparently the "international version") and have had 0 problems flashing, etc. Never had to use a PIT.
Click to expand...
Click to collapse
Not all, but i was having that problem, , i dont use PIT, but maybe can be a good idea to learn about that. I dont know if yue ever see a problem with the glide that the screen freeze and appears a lot of lines until get black. The most people with that problem, is with the rogers version.

[Q] IMEI says 0 on 4.4.1

Hey guys, I think I screwed up. I think that I lost my IMEI through flashing it and I didn't make a back up. It says 0 and only very few of the *# codes work, the *#7285# and #22745927 codes do absolutely nothing and the only one that I know of that works is *#*#4636#*#* which doesn't help me at all. Most programs that I use don't detect the phone correctly or my phones just downright wrecked. Example is DFS says CPS N/A in every section and Samsung MEID Repair says "Unhandled exception has occurred in your application" when I try to connect it to my phone.
I'm running CM11 4.4.1 and I had the problem when I was running a 4.3 ROM. Also I have data and I can make calls. Its just that I cant send MMS and I drop to edge over time and stay on edge until I restart.
Any help would be greatly appreciated. Everyone I call is saying it'll cost $65 - $75 IF they can even fix it.

Try to use nv writer to inject the imei.
http://forum.xda-developers.com/showthread.php?t=1804117

Note that if you reinject IMEI, it might screw up your network

audit13 said:
Try to use nv writer to inject the imei.
http://forum.xda-developers.com/showthread.php?t=1804117
Click to expand...
Click to collapse
I wish I could, When I try to use it, it says "Failed.. phone does not answer". Keep in mind that *#7284# doesnt do anything at all.

Did you know that you need to be completely stock in order to use the code?
Sent from my SAMSUNG-SGH-I747 using Tapatalk

pcshano said:
Did you know that you need to be completely stock in order to use the code?
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
I did not. That helps a LOT. Thank you so much. I havent tried going back yet, I'm gonna be more cautious about what i do now. Can I go back to stock from CM11 4.4.1 without screwing anything up? I keep seeing that you cant downgrade. Is that the case or is it just the case with official android roms?
Thank you so much, I feel like with your help I may be able to fix this. What im thinking that I have to do (I'll wait for your opinion) is that I should flash to stock, use the nv reader/writer, then ill be able to reroot it? When you say that it could screw up the network, what exactly do you mean?

chasetacos said:
I did not. That helps a LOT. Thank you so much. I havent tried going back yet, I'm gonna be more cautious about what i do now. Can I go back to stock from CM11 4.4.1 without screwing anything up? I keep seeing that you cant downgrade. Is that the case or is it just the case with official android roms?
Thank you so much, I feel like with your help I may be able to fix this. What im thinking that I have to do (I'll wait for your opinion) is that I should flash to stock, use the nv reader/writer, then ill be able to reroot it? When you say that it could screw up the network, what exactly do you mean?
Click to expand...
Click to collapse
I'm not sure what bootloader are you using
but IF your phone is fully unlocked, it doesn't matter, just flash 4.3 Stock and you're good to go
check out this post if you need help getting back to stock http://forum.xda-developers.com/showthread.php?t=2658486
the reason why you see people keep saying you can't "Downgrade" is mostly due to the bootloader you have, and it only apply to if and only if you're downgrading from MJB bootloader to a older version of Touchwiz (ie. Touchwiz 4.3 which will obviously come with MJB, thus you can't downgrade to 4.2 or 4.1 versions of touchwiz), not AOSP. if you're on AOSP in which CM is one, yes you can go from one AOSP to another, but no one does it because most of the time newer > older =D

pcshano said:
I'm not sure what bootloader are you using
but IF your phone is fully unlocked, it doesn't matter, just flash 4.3 Stock and you're good to go
check out this post if you need help getting back to stock http://forum.xda-developers.com/showthread.php?t=2658486
the reason why you see people keep saying you can't "Downgrade" is mostly due to the bootloader you have, and it only apply to if and only if you're downgrading from MJB bootloader to a older version of Touchwiz (ie. Touchwiz 4.3 which will obviously come with MJB, thus you can't downgrade to 4.2 or 4.1 versions of touchwiz), not AOSP. if you're on AOSP in which CM is one, yes you can go from one AOSP to another, but no one does it because most of the time newer > older =D
Click to expand...
Click to collapse
Cool. Im using CWM 6.0.4.3. Youre saying flash back to stock, then use the codes and the NV reader/writer? Also, when using the ZIP. am I using this through CWM "install zip"?

chasetacos said:
Cool. Im using CWM 6.0.4.3. Youre saying flash back to stock, then use the codes and the NV reader/writer? Also, when using the ZIP. am I using this through CWM "install zip"?
Click to expand...
Click to collapse
Yes.
but again you might want to update it to latest version since according to this http://forum.xda-developers.com/showthread.php?t=2658486, he mentioned version 6.0.4.5 and 6.0.4.7 though he didn't say if it's necessary to be but to be safe, you should so that you won't run into any issues.
though again, let me warn you, Reinjecting your IMEI, will work, BUT at the same time, it might screw up with your broadband
I experienced it once with one of my S3 and it stuck on either E or G network.. and I had to fix it by copy my efs folder to that phone in order to fix(and unless you have a good friend with S3 phone with same model, or own more than 1 S3, you won't be able to do it since nobody want to share, apply to me as well)

pcshano said:
Yes.
but again you might want to update it to latest version since according to this http://forum.xda-developers.com/showthread.php?t=2658486, he mentioned version 6.0.4.5 and 6.0.4.7 though he didn't say if it's necessary to be but to be safe, you should so that you won't run into any issues.
Click to expand...
Click to collapse
Cool. I Will do this and I will keep you updated. Itll be just a few moments before I complete the process

pcshano said:
Yes.
but again you might want to update it to latest version since according to this http://forum.xda-developers.com/showthread.php?t=2658486, he mentioned version 6.0.4.5 and 6.0.4.7 though he didn't say if it's necessary to be but to be safe, you should so that you won't run into any issues.
though again, let me warn you, Reinjecting your IMEI, will work, BUT at the same time, it might screw up with your broadband
I experienced it once with one of my S3 and it stuck on either E or G network.. and I had to fix it by copy my efs folder to that phone in order to fix(and unless you have a good friend with S3 phone with same model, or own more than 1 S3, you won't be able to do it since nobody want to share, apply to me as well)
Click to expand...
Click to collapse
So when I try to flash the stock I get an error status 7. Any advice?

chasetacos said:
So when I try to flash the stock I get an error status 7. Any advice?
Click to expand...
Click to collapse
funny a lot of people who use CWM got this error when trying to get back to stock lol
try TWRP.. it should definitely fix it

Cool. It may not be till tonight or tomorrow till I respond, I'm about to have a project m competition. I'll let you know how it goes as soon as I get a chance.

pcshano said:
funny a lot of people who use CWM got this error when trying to get back to stock lol
try TWRP.. it should definitely fix it
Click to expand...
Click to collapse
So now that Ive restored to stock, I have a transparent window with yellow text in it. it reads a bunch of info on the phone. It also said that it was in factory mode?

pcshano said:
funny a lot of people who use CWM got this error when trying to get back to stock lol
try TWRP.. it should definitely fix it
Click to expand...
Click to collapse
So despite being stuck in factory mode I was able to write the NV and luckily I dont have any new network problems as far as I know. However my IMEI now says / 00 and in the phone info it says "unknown"

So this is my progress so far. I have made connection with the NV items reader and I have saved the NV file. when i rewrote it i noticed that my imei is / 00 and it says unknown in the phone info. I have my imei and my converted imei and i was going to insert it into line 00550 but that line says "00550 (0x0226) - Inactive item". Factory mode is still on, I have edited the text files for both factory mode and keystr from ON to OFF and back again rebooting my phone each time and getting no result.
So im stuck in factory mode with / 00 imei. I can however make connection with programs now, I feel like im moving forward.
I feel like it may be worth noting that ive never ever seen a nv_data.bin in my phone....

chasetacos said:
So this is my progress so far. I have made connection with the NV items reader and I have saved the NV file. when i rewrote it i noticed that my imei is / 00 and it says unknown in the phone info. I have my imei and my converted imei and i was going to insert it into line 00550 but that line says "00550 (0x0226) - Inactive item". Factory mode is still on, I have edited the text files for both factory mode and keystr from ON to OFF and back again rebooting my phone each time and getting no result.
So im stuck in factory mode with / 00 imei. I can however make connection with programs now, I feel like im moving forward.
I feel like it may be worth noting that ive never ever seen a nv_data.bin in my phone....
Click to expand...
Click to collapse
make sure that you take your SIM out before injecting imei... then try again
and nv_data.bin is in your efs folder which you can only see it if you have some sort of root explorer

pcshano said:
make sure that you take your SIM out before injecting imei... then try again
and nv_data.bin is in your efs folder which you can only see it if you have some sort of root explorer
Click to expand...
Click to collapse
Still nothing, im getting the same result. This Nv data bin file is not in there. i mean, unless i dont know where to look, but ive checked the whole EFS folder and its not in there...

Hi try flash UCUEMJB 4.3 stock rom via odin .. I have same problem and the stock ROM fix my problem
Sent from my GT-P5113 using XDA Premium 4 mobile app
---------- Post added at 06:24 PM ---------- Previous post was at 06:06 PM ----------
I fix mine with this .....
Ok... I hated to see the posts about the tar file bricking a couple of phones. I had taken it down so not to brick anyone else's phone. But with over 400 downloads and only 2 reports I feel that it was fine, but in either case I have redone it. I have flashed it many many time now and my phone is fine.
Please only use Odin 3.0.7 http://forum.xda-developers.com/showthread.php?t=1722686
Make sure Auto Reboot and Re-Partition are checked. Uncheck F. Reset Time and anything else that might be checked.
Check and load the file in the PDA slot.
Start Flash and wait till it the phone reboots.
I747UCUEMJB 4.3 Odin flashable tar.
http://www.androidfilehost.com/?fid=23329332407590581
Sent from my GT-P5113 using XDA Premium 4 mobile app

elcocolo50 said:
Hi try flash UCUEMJB 4.3 stock rom via odin .. I have same problem and the stock ROM fix my problem
Sent from my GT-P5113 using XDA Premium 4 mobile app
---------- Post added at 06:24 PM ---------- Previous post was at 06:06 PM ----------
I fix mine with this .....
Ok... I hated to see the posts about the tar file bricking a couple of phones. I had taken it down so not to brick anyone else's phone. But with over 400 downloads and only 2 reports I feel that it was fine, but in either case I have redone it. I have flashed it many many time now and my phone is fine.
Please only use Odin 3.0.7 http://forum.xda-developers.com/showthread.php?t=1722686
Make sure Auto Reboot and Re-Partition are checked. Uncheck F. Reset Time and anything else that might be checked.
Check and load the file in the PDA slot.
Start Flash and wait till it the phone reboots.
I747UCUEMJB 4.3 Odin flashable tar.
http://www.androidfilehost.com/?fid=23329332407590581
Sent from my GT-P5113 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unfortunately that did nothing . I might just have to cry about it

[Q] ATT ZE500CL/Z00D Bricked After OTA Update - HELP (ZenFone 2E)

I have an ATT ZenFone 2E that I rooted successfully with this guide (http://forum.xda-developers.com/showthread.php?t=3116531). Due to an error on my part(fat finger) I accidentally started the OTA update. Now when I try to boot the phone all I get is the AT&T logo/splash screen. I can get it to go into recovery mode and it also will connect via ADB. I have tried flashing the UL-ASUS_Z00D-WW-12.16.5.30-user.zip firmware via ADB fastboot but I get an error saying firmware is wrong carrier ATT (WW). Am I using the wrong firmware for AT&T? I have searched all over and cannot find any ZenFone 2 firmware other than WW, TW, and CN. Any help or suggestions much appreciated.

JRSouth said:
I have an ATT ZenFone 2E that I rooted successfully with this guide (http://forum.xda-developers.com/showthread.php?t=3116531). Due to an error on my part(fat finger) I accidentally started the OTA update. Now when I try to boot the phone all I get is the AT&T logo/splash screen. I can get it to go into recovery mode and it also will connect via ADB. I have tried flashing the UL-ASUS_Z00D-WW-12.16.5.30-user.zip firmware via ADB fastboot but I get an error saying firmware is wrong carrier ATT (WW). Am I using the wrong firmware for AT&T? I have searched all over and cannot find any ZenFone 2 firmware other than WW, TW, and CN. Any help or suggestions much appreciated.
Click to expand...
Click to collapse
i have the exact problem since saturday, you have to use the ATT firmware but i couldnt find it anywhere

also
please pm me if u fixed yours

Lactaid said:
please pm me if u fixed yours
Click to expand...
Click to collapse
Still no luck. I'm sure if we could find the AT&T firmware we would be able to recover. Unfortunately it appears it is not available on ASUS support and AT&T doesn't even provide firmware. Our only hope may be from a backup of another device that isn't bricked.
Does anybody know if we could possibly use the temporary CWM recovery used in the root method to flash to another ROM that is compatible with this device? Any input would be greatly appreciated.

Are there any details I can provide that would be helpful in finding a solution to recover this device? I've seen a few other people are having the same issue as I am and I would like to help them as well if I can get mine fixed. Thanks

JRSouth said:
Are there any details I can provide that would be helpful in finding a solution to recover this device? I've seen a few other people are having the same issue as I am and I would like to help them as well if I can get mine fixed. Thanks
Click to expand...
Click to collapse
ive literally tried everything, my device has been bricked for like 3 weeks now

Lactaid said:
ive literally tried everything, my device has been bricked for like 3 weeks now
Click to expand...
Click to collapse
Just out of curiosity have you tried running the xoa_unroot.bat while your device is in recovery/fastboot mode? Im not sure if it will help but I've found in other threads that to avoid soft bricking your device you must run the unroot prior to applying the OTA update. I'm sure it's probably too late but maybe worth a shot. I'm going to try it when I get home from work today.

JRSouth said:
Just out of curiosity have you tried running the xoa_unroot.bat while your device is in recovery/fastboot mode? Im not sure if it will help but I've found in other threads that to avoid soft bricking your device you must run the unroot prior to applying the OTA update. I'm sure it's probably too late but maybe worth a shot. I'm going to try it when I get home from work today.
Click to expand...
Click to collapse
i havent tried it yet, do you have a tutorial of it?

The truth hurts, your screwd. This is a budget phone. At&t will not support it. Throw away device my their standards.

http://forum.xda-developers.com/attachment.php?attachmentid=3505774&d=1444776691 here the system image for the file maybe try to flash it to see if it helps

http://forum.xda-developers.com/showpost.php?p=63323103&postcount=118
^^^This worked for me successfully!
Make sure to only restore system and disable MD5 Checksum Verification.

I have the same problem, what do I do with that file? How do I apply it through the SD, so I can apply update from SD? I forgot pin code to phone so i need to restore

need help
Lactaid said:
http://forum.xda-developers.com/attachment.php?attachmentid=3505774&d=1444776691 here the system image for the file maybe try to flash it to see if it helps
Click to expand...
Click to collapse
how do I flash this?

Hola, alguien lo consiguió hacer..???

Lactaid said:
http://forum.xda-developers.com/attachment.php?attachmentid=3505774&d=1444776691 here the system image for the file maybe try to flash it to see if it helps
Click to expand...
Click to collapse
Im getting an error that day footer is wrong :/

m1chb3ltr3 said:
Im getting an error that day footer is wrong :/
Click to expand...
Click to collapse
Wait, are you bricked and tried using that as the fix? I cant post links but Check out Asus, They have Firmware, Kernel (havent checked but read it earlier today), and Boot Unlock that you can get right from (assuming you have an account) My Products.
Also... Has anyone used that method recently?
Cathaterfish said:
Sorry I will give credit to DavePmer for his guide in minute, but qouting him for some reason wouldnt let me post, even when I removed the links? anyways I'll edit and give credit I promise
So my phone is stuck on the Asus Logo, I downloaded all of this and followed the instructions all the way up to:
11) now the fun part. open your microsd card and check the folder TWRP\BACKUPS see if it has a folder named
01234567890123456789 if it does great if not, not a problem just copy all the system files from the folder
you extracted TWRP-zf2e-ATT_12.16.10.7 to your microsd card TWRP\BACKUP\01234567890123456789\ whatever folder you have next\ in other words, replace your system.ext4.win000 files with my system.ext4.win000 file.
Replace your system.ext4.win001 with mine, and replace system.ext4.win00.md5 with mine as well as system.ext4.win001.md5 when done safely dismount the microsd card.
It then occurred to me that i should be more careful this time around... This was from October and although I ran across links saying for the most part that this was a good shot for fixing my ZE500CL, Z00D or whatever. But things have changed since then and I was wondering if this is still the best/easiest/safe route. I learned pretty quick that over looking things like OTA/Root or in my case Making assumptions is a fast path to really doing a number on your phone. (Honestly I just started even giving thought to rooting my phone, just considered them back ups I kept in a box). I now have the itch to do this right so hoping to fix this and go about this the right way.
Thanks for any input.
Currently DLing RussaiNBeaR, went and bought a card reader/writer. I was going to Download the firmware, kernel and boot unlock tool but currently staying at a place where im getting 160kbs on my DL's. So if I can get away with davepmer's guide that would be great, or something other or smaller than downloading 4gbs on this Internet Connection.
EDIT: Forgot to add that I haven't completed this step yet because the wording kind of tripped me up. And I want to do this right. When he says "in other words replace your system.ext4.win000 files with my system.ext4.win000 file." and then goes on and 3 more to the list. Does that mean only copy and replace those 4? or does that include all system.(whatever).(extension) files? Im sure it sounds really dumb or noobish but the fact that the next step is using twrp to restore using system only makes me afraid to do this part wrong.
Click to expand...
Click to collapse

ayuda
ATT ZE500CL/Z00D rom