Related
There's already a guide here for obtaining permanent root using VISIONary, but some folks in #G2ROOT are having issues with the way that VISIONary modifies parititons. Using rage directly is a bit cleaner, since you know exactly what it's going to touch at each step of the way. I did NOT come up with any of this on my own, I'm building completely off of work that others have done. Speaking of which-
None of this would be possible without the tireless work that scotty2 put in. He stayed with the project for well over a month, through lots of smashed hopes and dead ends, until the solution was finally found. Were it not for his work, as well as the help of a few other key folks- we wouldn't be here. He deserves our thanks and some donations! We're talking hundreds of hours of work here, a couple bucks is not too much for that. His paypal is:
[email protected]Send him some love! I'm not asking for anything myself, because I spent a half hour putting this together, and that doesn't deserve any donations!
[size=+2]G2 ROOT INSTRUCTIONS[/size]
=================================================
These are modified instructions based on the ones posted at http://bit.ly/g2root that use Visionary. A number of people have run into issues with the way that Visionary juggles around temporary partitions, and using the original root exploit is a much easier, and cleaner method for achieving permanent root. This tutorial will walk you through the rooting process by first achieving temporary root, and moving on to permanent root.
[size=+1]REQUIREMENTS[/size]
=================================================
Visionary disabled at boot or uninstalled completely
Android Terminal Emulator app
ADB
vision-combined-root.zip (Attached to this post, OR these two files: )
G2TempRoot.zip (http://forum.xda-developers.com/showthread.php?t=797042) NOTE: only download the files! Don't follow these instructions yet
vision-perm-root.zip (http://forum.xda-developers.com/showthread.php?t=833965) NOTE: again, just download the files from the thread.
In the commands to run below, $ or # represent the prompt and should NOT be entered as part of the commands.
[size=+2]VERY IMPORTANT![/size]Visionary has caused filesystem corruption for some users during the rooting process. Before attempting the instructions below, make sure that you have "auto run on boot" turned OFF, and reboot your system. Since you will not need visionary anyway after this, you might as well just uninstall visionary and reboot NOW before doing anything.
[size=+1]TEMP ROOT[/size]
=================================================
ON YOUR PC:
Unzip the G2TempRoot files to a folder. From a cmd window or terminal, navigate to that folder and execute these commands:
Code:
$ adb push su /sdcard/su
$ adb push Superuser.apk /sdcard/Superuser.apk
$ adb push rage /data/local/tmp/rage
$ adb push busybox /data/local/tmp/busybox
$ adb push root /data/local/tmp/root
$ adb shell chmod 0755 /data/local/tmp/*
ON YOUR PHONE:
Launch Terminal Emulator
/data/local/tmp/rage
Wait for the message: "Forked #### childs."
Menu > Reset Term - Terminal Emulator will exit.
Launch Terminal Emulator, it Force Closes. Launch a second time, and you'll have a root shell
**NOTE**: in the original directions from the XDA thread, you are instructed to run the /data/local/tmp/root script here. DON'T do this
just yet. Leave the terminal window open.
[size=+1]PERM ROOT[/size]
=================================================
ON YOUR PC:
unzip the vision-perm-root.zip and navigate to that folder. There will be four files. You will need to push two of these to your phone- hboot-eng.img, and one of the wpthis-[..].ko files.
If you HAVE applied the OTA update, push wpthis-OTA.ko.
If you HAVE NOT applied the OTA update, push wpthis-pre-OTA.ko.
Code:
$ adb push hboot-eng.img /data/local
$ adb push wpthis-OTA.ko /data/local
ON YOUR PHONE:
You should still have terminal emulator up, at a root prompt. Now run:
Code:
# insmod /data/local/wpthis-OTA.ko
You should see:
Code:
init_module 'wpthis-OTA.ko' failed (Function not implemented)
That means it worked. This next step is CRUCIAL. You must make sure that you are writing to the proper partition here or you could brick your phone. To be absolutely clear- the partition is mmcblk(zero)p(one)(eight)
Code:
dd if=/data/local/hboot-eng.img of=/dev/block/mmcblk0p18
You should see some messages indicating that it was written. Next, run:
Code:
# /data/local/tmp/root
This will lock in root, and give you 'su' access in the future. Next, run:
Code:
# sync
Now wait at least a minute, just to be safe. After waiting, reboot your phone using the power button. After it finishes starting up, launch the terminal emulator, and type 'su'. You should get the prompt asking you to grant permissions. If you got the prompt, congratulations! You have permanent root!
I used these instructions and they worked brilliantly.
Sounds like it's a little safer than using VISIONary, which some people in the thread are reporting can get confused and not let you root because it thinks you already have root, etc.
I love it when a plan comes together. Perma-root. thanks man, i never had much luck getting visonary to work so this was spot on. worked like a charm
*not smart enough*
*leaves thread*
I really try to leave ADB out of the equation since I'm not comfortable navigating it.... I suppose I could dedicate my time to learning it, but it's not worth it since I would only use it once every two years to root my phone. In 16 hours I'm sure there will probably be a one click perm root method out anyway.
It worked flawlessly!
I always get so stressed when I root my phones, especially without tutorial vids.
I first did my G1 and that worked perfectly fine.
My second attempt at rooting was with my MT3G and that resulted in a bricked device because one of the lines of code was incorrect in the thread.
This, however, was clearly and plainly spelled out exactly to what happened to my phone.
I give you my thanks.
Awesome- glad to hear it's working well for people. If anybody sees areas that I could improve in the description just let me know.
sinistersai4d4d said:
I really try to leave ADB out of the equation since I'm not comfortable navigating it....
Click to expand...
Click to collapse
ADB is worth it IMHO because it makes moving files around easy, whether you're rooted or not. You don't have to turn on SD card storage, you can just do adb pull/push etc to grab or put files when you need them. Worth the effort. The one click root should be out within the next couple days though, you are right about that one.
trigeek,
I already perm rooted earlier, but just wanted to say you gave a very nicely detailed explanation that anyone should be able to follow. Well done!
Great guide. I liked it a lot more than Unforgivens just because it doesn't rely on VisionARY which might mess things up.
Guide worked absolutely great, no problems. I did not try the visionary method first, but for some reason I just felt safer doing it in adb.
Thank you!
Sorry for the noob question...? but does this mean we have fully rooted to G2 and now we can load ROMS on it when they come out ????
Edit: Nevermind I didnt see the sticky
RaffieKol said:
Sorry for the noob question...? but does this mean we have fully rooted to G2 and now we can load ROMS on it when they come out ????
Click to expand...
Click to collapse
You got it!
RaffieKol said:
Sorry for the noob question...? but does this mean we have fully rooted to G2 and now we can load ROMS on it when they come out ????
Edit: Nevermind I didnt see the sticky
Click to expand...
Click to collapse
Custome ROMs, custom Recovery...the whole 9 yards
Thanks for posting this, it was so easy!
Thank you so very much it was a success
this is my first rooting on an android device... im freaking out... but here i go.... if something happens i will just report my phone lost and get a new one i guess ahahah still... im scared.
Issues
I was temp rooted before using rage and then thru Visionary. But I decided to go back to stock till we have permanent root. I perm rooted today using this method. But I'm having the following issues:
1) adb remount
- remount failed: Operation not permitted
2) when using Root Explorer in /system, toggling Mount R/W does not work
- the only way to mount it R/O is thru terminal/adb shell. Once mounted R/O, the only way to mount R/W again is thru a reboot. Issuing mount -o remount ro /system either in terminal or adb shell does not work.
i actually changed my mind... im going to wait for a one click untended root i guess.... to scary...
joackie27 said:
I was temp rooted before using rage and then thru Visionary. But I decided to go back to stock till we have permanent root. I perm rooted today using this method. But I'm having the following issues:
1) adb remount
- remount failed: Operation not permitted
2) when using Root Explorer in /system, toggling Mount R/W does not work
- the only way to mount it R/O is thru terminal/adb shell. Once mounted R/O, the only way to mount R/W again is thru a reboot. Issuing mount -o remount ro /system either in terminal or adb shell does not work.
Click to expand...
Click to collapse
make sure you have debugging enabled.
juanshop said:
i actually changed my mind... im going to wait for a one click untended root i guess.... to scary...
Click to expand...
Click to collapse
Not gonna happen.
then i guess.... im going to jump in it.... wish me luck...
This thread is copied and modified from the G2 thread by trigeek for the Desire Z:
http://forum.xda-developers.com/showthread.php?t=834228
Apart from the changed hboot and wpthis-Z kernel module for the Desire Z instead of the G2, I have also updated the su-binary and SuperUser.apk to the latest version by ChainsDD
In no way I can be held responsible for any bricks to your phone. You are using this guide at your own risk!! I did test this guide on my own, and also on a friend's Desire Z.
As there was no manual rooting guide for the Desire Z, I posted it myself in order to help others that do not like visionary and like to do it 'the clean way'.
[GUIDE] Temp to permanent root on Desire Z, using rage instead of visionary
=================================================
There's already a guide here for obtaining permanent root using VISIONary, but some folks in #G2ROOT are having issues with the way that VISIONary modifies parititons. Using rage directly is a bit cleaner, since you know exactly what it's going to touch at each step of the way. I did NOT come up with any of this on my own, I'm building completely off of work that others have done. Speaking of which-
None of this would be possible without the tireless work that scotty2 put in. He stayed with the project for well over a month, through lots of smashed hopes and dead ends, until the solution was finally found. Were it not for his work, as well as the help of a few other key folks- we wouldn't be here. He deserves our thanks and some donations! We're talking hundreds of hours of work here, a couple bucks is not too much for that. His paypal is:
[email protected]
Send him some love! I'm not asking for anything myself, because I spent a half hour putting this together, and that doesn't deserve any donations!
DESIRE Z ROOT INSTRUCTIONS
=================================================
These are modified instructions based on the ones posted at http://bit.ly/g2root that use Visionary. A number of people have run into issues with the way that Visionary juggles around temporary partitions, and using the original root exploit is a much easier, and cleaner method for achieving permanent root. This tutorial will walk you through the rooting process by first achieving temporary root, and moving on to permanent root.
REQUIREMENTS
=================================================
•Visionary disabled at boot or uninstalled completely
•Android Terminal Emulator app
•ADB
•desirez-combined-root.zip (Attached to this post)
In the commands to run below, $ or # represent the prompt and should NOT be entered as part of the commands.
VERY IMPORTANT!
Visionary has caused filesystem corruption for some users during the rooting process. Before attempting the instructions below, make sure that you have "auto run on boot" turned OFF, and reboot your system. Since you will not need visionary anyway after this, you might as well just uninstall visionary and reboot NOW before doing anything.
TEMP ROOT
=================================================
ON YOUR PC:
Unzip the z-temp-root files to a folder. From a cmd window or terminal, navigate to that folder and execute these commands:
Code:
$ adb push su /sdcard/su
$ adb push Superuser.apk /sdcard/Superuser.apk
$ adb push rage /data/local/tmp/rage
$ adb push busybox /data/local/tmp/busybox
$ adb push root /data/local/tmp/root
$ adb shell chmod 0755 /data/local/tmp/*
ON YOUR PHONE:
1.Launch Terminal Emulator
2.
Code:
/data/local/tmp/rage
3.Wait for the message: "Forked #### childs."
4.Menu > Reset Term - Terminal Emulator will exit.
5.Launch Terminal Emulator, it Force Closes. Launch a second time, and you'll have a root shell
6.**NOTE**: in the original directions from the XDA thread, you are instructed to run the /data/local/tmp/root script here. DON'T do this just yet. Leave the terminal window open.
PERM ROOT
=================================================
ON YOUR PC:
unzip z-perm-root and navigate to that folder. There will be four files. You will need to push two of these to your phone: hboot_7230_0.84.2000_100908.nb0 and wpthis-Z.ko. The other two files are optional for checksum verification.
Code:
$ adb push hboot_7230_0.84.2000_100908.nb0 /data/local
$ adb push wpthis-Z.ko /data/local
Optional but might came in handy:
Code:
$ adb push md5checksum /sdcard/md5checksum
ON YOUR PHONE:
You should still have terminal emulator up, at a root prompt. Now run:
Optional but recommended:
Code:
# /data/local/tmp/busybox md5sum /data/local/*
You should see:
hboot_7230_0.84.2000_100908.nb0 2ce1bdd5e4c1119ccfcecb938710d742
wpthis-Z.ko c73c5e77c91d306c418983c002b60b93
In case your hboot or wpthis-Z.ko file do not have the same md5hash as shown above, DO NOT CONTINUE. This means your file is corrupt or you are using a different file, for example the one for the G2 instead of Desire Z.
Now, let's turn off security for permanent flashing:
Code:
# insmod /data/local/wpthis-Z.ko
init_module 'wpthis-Z.ko' failed (Function not implemented)
That means it worked. This next step is CRUCIAL. You must make sure that you are writing to the proper partition here or you could brick your phone. To be absolutely clear- the partition is mmcblk(zero)p(one)(eight)
# dd if=/data/local/hboot_7230_0.84.2000_100908.nb0 of=/dev/block/mmcblk0p18
Click to expand...
Click to collapse
You should see some messages indicating that it was written.
Code:
# /data/local/tmp/root
This will lock in root, and give you 'su' access in the future. Next, run:
Code:
# sync
Now wait at least a minute, just to be safe. After waiting, reboot your phone using the power button. After it finishes starting up, launch the terminal emulator, and type 'su'. You should get the prompt asking you to grant permissions. If you got the prompt, congratulations! You have permanent root!
Nice guide, thanks
Thank you Mr Q. works like a charm!
first of all.. thanks for this great guide. Everything went perfect until I came to the step to lock in root. After the command "/data/local/tmp/root" I get this error:
mkdir failed for /system/xbin, File exists
when I just ignore it and type sync after that I have no root acces after a reboot.
Does anybody have a solution for it? I have already done a hardreset with the same results.
thanks in advance...
So this only roots your phone? Or does it s-off as well? From what I understand this s-offs as well because you're pushing the hboot as well.
EDIT: Nevermind. I read the thread again and it does indeed s-off as well.
MarDor said:
first of all.. thanks for this great guide. Everything went perfect until I came to the step to lock in root. After the command "/data/local/tmp/root" I get this error:
mkdir failed for /system/xbin, File exists
when I just ignore it and type sync after that I have no root acces after a reboot.
Does anybody have a solution for it? I have already done a hardreset with the same results.
thanks in advance...
Click to expand...
Click to collapse
Everything was fine up until this point. So i restarted the phone and phone is stuck on the "quietly brilliant" screen
ssyed said:
Everything was fine up until this point. So i restarted the phone and phone is stuck on the "quietly brilliant" screen
Click to expand...
Click to collapse
having the same issue here
So I'm looking into these S-OFF and rooting threads and here is two bricks too. Does anyone have an answer for these two or should I skip this? Did the hboot do this or was it due to some problem in inserted kernel module? (I.E. the reboot of the emmc controller resulted in a ****ed up file system?)
yelti said:
having the same issue here
Click to expand...
Click to collapse
AnyDone said:
So I'm looking into these S-OFF and rooting threads and here is two bricks too. Does anyone have an answer for these two or should I skip this? Did the hboot do this or was it due to some problem in inserted kernel module? (I.E. the reboot of the emmc controller resulted in a ****ed up file system?)
Click to expand...
Click to collapse
Ok, so I have figured out how to get out of this "quietly brilliant" loop.
First of all, this isn't a brick and all that is needed to fix this is a quick factory reset from the bootloader.
ssyed said:
First of all, this isn't a brick and all that is needed to fix this is a quick factory reset from the bootloader.
Click to expand...
Click to collapse
Ok, so does any one have an explanation why this happened?
1. It wasn't wrong or screwed hboot, otherwise we would be facing a real brick?
Was it the root method? Was it the wpthis-Z.ko?
It might have been the kernel module, but I can't be sure about that with so little knowledge I have. (sure not the module itself but the kick to the emmc?) Just that it seems to be more likely option than a rooting attempt on a cached r-o file system?
I'm not complaining about the guide, it is specific and easy to follow but I would really love to have these semi bricks etc inspected more closely. It is not really helping to encourage ppl to root and try safe-off when we have unexplained bricks and semi-bricks around
MarDor said:
first of all.. thanks for this great guide. Everything went perfect until I came to the step to lock in root. After the command "/data/local/tmp/root" I get this error:
mkdir failed for /system/xbin, File exists
Click to expand...
Click to collapse
ssyed said:
Everything was fine up until this point. So i restarted the phone and phone is stuck on the "quietly brilliant" screen
Click to expand...
Click to collapse
yelti said:
having the same issue here
Click to expand...
Click to collapse
Did you guys run Visionary before trying this "rage" method of rooting ?
steviewevie said:
Did you guys run Visionary before trying this "rage" method of rooting ?
Click to expand...
Click to collapse
I don't know about others, but I didn't on mine. I was rooting it for the first time. Also, I don't know if this has anything to do with it, but I have the Bell version from Canada.
The root script threw an error for me too, so just to be safe I opened the script and typed in the commands manually. If you have problems with the script, just run these commands from the root terminal on your phone:
Code:
/data/local/tmp/busybox killall rage
mount -o rw,remount -t ext3 /dev/block/mmcblk0p25 /system
mkdir /system/xbin
/data/local/tmp/busybox cp /data/local/tmp/busybox /system/xbin/busybox
chmod 4755 /system/xbin/busybox
/system/xbin/busybox --install -s /system/bin
cp /sdcard/Superuser.apk /system/app/Superuser.apk
cp /sdcard/su /system/bin/su
chmod 4755 /system/bin/su
mount -o ro,remount -t ext3 /dev/block/mmcblk0p25 /system
sync
"mkdir /system/xbin" just creates a directory, if it already exists you can ignore this command and proceed.
Hope this helps someone.. Thanks to the OP for the scripts.
Have a quick look, /system/xbin already seems to exist on my phone too.
So is there an error in the script ? e.g. needs to ignore if the directory already exists ? Or am I (we ?) missing something ?
goldenarmZ said:
"mkdir /system/xbin" just creates a directory, if it already exists you can ignore this command and proceed.
Click to expand...
Click to collapse
Good info, thanks. Perhaps just comment out that line of the script, to save running it all by hand (and therefore be prone to more error ?) ?
steviewevie said:
Good info, thanks. Perhaps just comment out that line of the script, to save running it all by hand (and therefore be prone to more error ?) ?
Click to expand...
Click to collapse
I did that first.. it threw more errors with the mount commands because I'd already run the script once, so some of the commands were repated. If it's your first run through, commenting it out would be fine.
I only did it line by line so I could see any more errors for myself and decide if they were important. As it turns out the script is very simple and only involves moving files around and changing their permissions.. anything that goes wrong should be immediately apparent even if you have no experience with shell commands.
goldenarmZ said:
I only did it line by line so I could see any more errors for myself and decide if they were important. As it turns out the script is very simple and only involves moving files around and changing their permissions.. anything that goes wrong should be immediately apparent even if you have no experience with shell commands.
Click to expand...
Click to collapse
Thanks, I was starting to worry about the bad experiences outlined above, given that this method appeared to be a more reliable one than VISIONary, and a route I was going to go down. But I'm pretty comfortable with shell scripts, so your input makes me feel a whole lot better !
goldenarmZ said:
The root script threw an error for me too, so just to be safe I opened the script and typed in the commands manually. If you have problems with the script, just run these commands from the root terminal on your phone:
-code-
"mkdir /system/xbin" just creates a directory, if it already exists you can ignore this command and proceed.
Hope this helps someone.. Thanks to the OP for the scripts.
Click to expand...
Click to collapse
thanks for this... I will give it a try
Yay, I just perma-rooted my phone using this method, many thanks to those who came up with the method in the first place, plus this handy guide too.
I got the message about /system/xbin already existing, but you can just ignore that message, it runs the rest of the script anyway.
ssyed said:
Ok, so I have figured out how to get out of this "quietly brilliant" loop.
First of all, this isn't a brick and all that is needed to fix this is a quick factory reset from the bootloader.
Click to expand...
Click to collapse
So after doing the guide you simply reeboot your phone into bootloader and select factory reset?
And then will the device be perm root and s-off???
So after 7 attempts, i decided i should seek help.
I've been trying to root my g2 using VISIONary r14.
1. I installed visionary r14 [i have usb debugging on] i leave all the check boxes unchecked and hit temp root
2. after temp root is finished, i hit attempt perm root.
phone reboots. i see superuser permission in the app drawer, all seems to be
fine.
3. Now I plug my phone to my PC via usb [i have the androidSDK and all drivers installed properly]
i change directory to C:\AndroidSDK\tools\
check adb devices and my device is listed.
then i shoot the following commands
adb push wpthis-OTA.ko /data/local/wpthis-OTA.ko
adb push hboot_7230_0.84.2000_100908.nb0/data/local/hboot_7230_0.84.2000_100908.nb0
adb shell
su
and this returns permission denied.
Ive searched everywhere and everyone says when the superuser prompt shows up check "Remember" and click yes. However this does not show up for me, at all.
I even go into terminal and try it, terminal also gives me 'Permission Denied'
any help anyone?
I'd just do it using the rage method. You obviously understand how to use some simple commands in adb, it's just that there's a few (read: not many) more. It's stickied in the development section.
Sent from my T-Mobile G2 running Cyanogenmod.
Yes rage way is the way to go. I think its a total of about 4 lines you need to enter
Sent from my HTC Vision using XDA App
yeah i ended up using the rage method, it was a lot easier than i thought it would be.
I did it using visionary r13 and terminal emulator. No pc. Go to youtube look up Blackprince310 he made a video on it. If it it doesn't work try permroot option on r13.
Sent from my T-Mobile G2 using XDA App
I would love to go the rage way, but I cannot get any permissions to do so...
Visionary r14 gives me a parsing error and does not install....
I've spent about 8 hours today trying to get this done!!! sigh!
Crey23 said:
I would love to go the rage way, but I cannot get any permissions to do so...
Visionary r14 gives me a parsing error and does not install....
I've spent about 8 hours today trying to get this done!!! sigh!
Click to expand...
Click to collapse
What steps have you taken? The rage way does not require visionary at all.
Sent from my HTC Vision using XDA App
shortlived said:
What steps have you taken? The rage way does not require visionary at all.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
right!!! I've been sitting at my pc for about 8 or 9 hours trying to root.
I continue to get adb: permission denied message no matter what I try. I follwed the adb for dummies guide that didnt work. I tried the VISONary r14 apk, I can't even open it.....
I'm beggining to wonder if I should run recovery first, get back to stock, and then try to root....how will that affect all my apps? Will it work?
Well you can always back them up with titanium backup. But yea i think you should do a factory reset then try the rage method. Follow the guide word for word. If you still got problems post em here i will try to help as much as i can. The whole process should take around 5min.
Sent from my HTC Vision using XDA App
I dont know how to link to a post with the xda app so here is the guide quoted
trigeek said:
There's already a guide here for obtaining permanent root using VISIONary, but some folks in #G2ROOT are having issues with the way that VISIONary modifies parititons. Using rage directly is a bit cleaner, since you know exactly what it's going to touch at each step of the way. I did NOT come up with any of this on my own, I'm building completely off of work that others have done. Speaking of which-
None of this would be possible without the tireless work that scotty2 put in. He stayed with the project for well over a month, through lots of smashed hopes and dead ends, until the solution was finally found. Were it not for his work, as well as the help of a few other key folks- we wouldn't be here. He deserves our thanks and some donations! We're talking hundreds of hours of work here, a couple bucks is not too much for that. His paypal is:
[email protected]Send him some love! I'm not asking for anything myself, because I spent a half hour putting this together, and that doesn't deserve any donations!
[size=+2]G2 ROOT INSTRUCTIONS[/size]
=================================================
These are modified instructions based on the ones posted at http://bit.ly/g2root that use Visionary. A number of people have run into issues with the way that Visionary juggles around temporary partitions, and using the original root exploit is a much easier, and cleaner method for achieving permanent root. This tutorial will walk you through the rooting process by first achieving temporary root, and moving on to permanent root.
[size=+1]REQUIREMENTS[/size]
=================================================
Visionary disabled at boot or uninstalled completely
Android Terminal Emulator app
ADB
vision-combined-root.zip (Attached to this post, OR these two files: )
G2TempRoot.zip (http://forum.xda-developers.com/showthread.php?t=797042) NOTE: only download the files! Don't follow these instructions yet
vision-perm-root.zip (http://forum.xda-developers.com/showthread.php?t=833965) NOTE: again, just download the files from the thread.
In the commands to run below, $ or # represent the prompt and should NOT be entered as part of the commands.
[size=+2]VERY IMPORTANT![/size]Visionary has caused filesystem corruption for some users during the rooting process. Before attempting the instructions below, make sure that you have "auto run on boot" turned OFF, and reboot your system. Since you will not need visionary anyway after this, you might as well just uninstall visionary and reboot NOW before doing anything.
[size=+1]TEMP ROOT[/size]
=================================================
ON YOUR PC:
Unzip the G2TempRoot files to a folder. From a cmd window or terminal, navigate to that folder and execute these commands:
Code:
$ adb push su /sdcard/su
$ adb push Superuser.apk /sdcard/Superuser.apk
$ adb push rage /data/local/tmp/rage
$ adb push busybox /data/local/tmp/busybox
$ adb push root /data/local/tmp/root
$ adb shell chmod 0755 /data/local/tmp/*
ON YOUR PHONE:
Launch Terminal Emulator
/data/local/tmp/rage
Wait for the message: "Forked #### childs."
Menu > Reset Term - Terminal Emulator will exit.
Launch Terminal Emulator, it Force Closes. Launch a second time, and you'll have a root shell
**NOTE**: in the original directions from the XDA thread, you are instructed to run the /data/local/tmp/root script here. DON'T do this
just yet. Leave the terminal window open.
[size=+1]PERM ROOT[/size]
=================================================
ON YOUR PC:
unzip the vision-perm-root.zip and navigate to that folder. There will be four files. You will need to push two of these to your phone- hboot-eng.img, and one of the wpthis-[..].ko files.
If you HAVE applied the OTA update, push wpthis-OTA.ko.
If you HAVE NOT applied the OTA update, push wpthis-pre-OTA.ko.
Code:
$ adb push hboot-eng.img /data/local
$ adb push wpthis-OTA.ko /data/local
ON YOUR PHONE:
You should still have terminal emulator up, at a root prompt. Now run:
Code:
# insmod /data/local/wpthis-OTA.ko
You should see:
Code:
init_module 'wpthis-OTA.ko' failed (Function not implemented)
That means it worked. This next step is CRUCIAL. You must make sure that you are writing to the proper partition here or you could brick your phone. To be absolutely clear- the partition is mmcblk(zero)p(one)(eight)
Code:
dd if=/data/local/hboot-eng.img of=/dev/block/mmcblk0p18
You should see some messages indicating that it was written. Next, run:
Code:
# /data/local/tmp/root
This will lock in root, and give you 'su' access in the future. Next, run:
Code:
# sync
Now wait at least a minute, just to be safe. After waiting, reboot your phone using the power button. After it finishes starting up, launch the terminal emulator, and type 'su'. You should get the prompt asking you to grant permissions. If you got the prompt, congratulations! You have permanent root!
Click to expand...
Click to collapse
Sent from my HTC Vision using XDA App
Sent from my HTC Vision using XDA App
i need help, i perm rooted my phone now it got stuck at the HTC start up! what should i do?? pls reply ASAP!
Hello All,
So I decided to try rooting after doing all this research. I chose to use the "rage" method shown here: http://forum.xda-developers.com/showthread.php?t=834228
I download all the files and everything needed, I get adb to work, and I type in the displayed commands. My problem comes in when I move over to the phone and use Terminal Emulator. I type in /data/local/tmp/rage just as the directions specified but emulator then spits back: /data/local/tmp/rage:not found.
I have scoured the internet to find a solution to this problem and I can't seem to find any postings of someone else having the same problem. How do I get past this. Is there something I am missing? Please help!
in terminal or in adb shell... go to that directory to tmp
then do ls to check if rage is in there
so you would go
cd /data
cd /local
cd tmp
then
ls
and hopefully you should see rage in there if you do then try it again if you dont push it back in there
I tried your suggestion using terminal on my phone and it keeps telling me Is: permission denied. So I tried cd /data\local\tmp and it let me get to that point. then i tried the dir command and I get dir: permission denied.
hey, i recently rooted my desire z and i had that problem too
i found that if you don't do run this
Code:
$ adb shell chmod 0755 /data/local/tmp/*
make sure you run that before you type /data/local/tmp/rage in your terminal
I got it to work!! I am rooted. I finally realized that I had missed a space. I am about to flash my first rom!! YAAAAYYY. Thanks to all the hard work of others and their wonderful directions lol
Hi everyone, I`m getting the "Main Version is older! Update Fail!" message and have run into a brick wall. Can anybody help? Hopefully the screen grab of the cmd has attached correctly so one of you clever people may be able to see it and know what is wrong.... I have not got a clue!
Too bad you didn't scroll down before you took the screen shot.
Agoattamer said:
Too bad you didn't scroll down before you took the screen shot.
Click to expand...
Click to collapse
That was it dude! Below Exploiting Device, it just went back to the start C:Users...ect. There was nothing else of interest.
Anybody know what went wrong?
Dazblink said:
That was it dude! Below Exploiting Device, it just went back to the start C:Users...ect. There was nothing else of interest.
Anybody know what went wrong?
Click to expand...
Click to collapse
If i remember correctly fre3vo exploits and then exits the shell.
If you use "adb shell" again, you should have root on your phone.
I followed the guide in the cyanogenmod wiki and it worked, so maybe have a look at that:
http://wiki.cyanogenmod.com/wiki/HTC_Desire_HD:_Firmware_Downgrade_(Gingerbread)
Your error sound like you didn't use misc_version.
Dlog said:
If i remember correctly fre3vo exploits and then exits the shell.
If you use "adb shell" again, you should have root on your phone.
I followed the guide in the cyanogenmod wiki and it worked, so maybe have a look at that:
http://wiki.cyanogenmod.com/wiki/HTC_Desire_HD:_Firmware_Downgrade_(Gingerbread)
Your error sound like you didn't use misc_version.
Click to expand...
Click to collapse
yeah i think that's right, i think you will exit shell after the exploit. if you type adb shell and you get a # you're root. if you get a $, try typing su then hit enter and if you get a # you're root
i followed the guide that Dlog linked to and it worked well so i would definitely do that. but i guess that's what you're doing anyway?
it is because the update package in your sdcard is older than your device running right now,
that's why after fre3vo and got root in adb shell (the # sign), you run this command
./misc_version -s 1.31.405.6 , to make your DHD think the update package is newer, and do the update from the IMG file in your sdcard
after update complete (downgrade), you can now use visionary+ to root .
BTW, what's your build number ?
Sorted it cheers! Typed in abd shell again and got the #
Thanks for the replies!