Related
Titanium Backup says "error could not acquire root", yet I "am" rooted???
Ok, so my v2.1 evo was rooted using Unrevoked 3.21, I install Titanium Backup this morning and when I launch it an error comes up that says "Sorry, I could not acquire root privileges. This application will not work. Please verify that your rom is rooted and includes busy box and try again."
Whats the deal wit this error? Unrevoked said it was succesful.
did you download busybox? when you open TB hit the problems? button. download busy box and try again.
you can also verify root by downloading terminal emulator and opening it. when its open type SU and hit enter. # means root. $ means no root.
Be weary. I used unrevoked3 for mac on a froyo Evo. I'm having some issues currently. Be careful before you proceed. You should download ROM manager as well. Once you download busybox perform your backup. A friend recommended Appbrain over Titanium Backup. Once your done with your back up, reboot into the bootloader and try to go into recovery to perform a nandroid backup. If you select recovery and it takes you to the htcevo 4g white screen and nothing happens, you're having the same issue as i am. I wouldn't recommend flashing any radios or roms yet. I'm working with some other members to try to figure this issue out. Apparently this is why other experts don't like unrevoked3.
There might be a missing pc36img or unrevoked forever might need to be install, but I don't want to lock my phone into root with unrevoked. From my understanding, if you use unrevoked forever, you wont be able to unroot.
jontorres said:
Ok, so my v2.1 evo was rooted using Unrevoked 3.21, I install Titanium Backup this morning and when I launch it an error comes up that says "Sorry, I could not acquire root privileges. This application will not work. Please verify that your rom is rooted and includes busy box and try again."
Whats the deal wit this error? Unrevoked said it was succesful.
Click to expand...
Click to collapse
[highlight]Mod Edit: If you have nothing useful to say, say nothing at all. The question in the correct section this time.[/highlight]
jontorres said:
Ok, so my v2.1 evo was rooted using Unrevoked 3.21, I install Titanium Backup this morning and when I launch it an error comes up that says "Sorry, I could not acquire root privileges. This application will not work. Please verify that your rom is rooted and includes busy box and try again."
Whats the deal wit this error? Unrevoked said it was succesful.
Click to expand...
Click to collapse
What about any other app requesting root? Like setCPU or ShootMe? I'd install one of those to confirm root. If it works then you might you need to reinstall TB if not well then root was not properly achieved.
TruSlide said:
did you download busybox? when you open TB hit the problems? button. download busy box and try again.
you can also verify root by downloading terminal emulator and opening it. when its open type SU and hit enter. # means root. $ means no root.
Click to expand...
Click to collapse
Thanks for the suggestions, will try those out and report back what happened.
Sporkman said:
take the time to read the info it tales you have to fix said issue
Click to expand...
Click to collapse
MOD PM'd, apparently you are following my threads now to post the same "ignorant" response, your sanction from the mod will follow, enjoy.
Everyone else, thanks for actually offering helpful suggestions.
TruSlide said:
did you download busybox? when you open TB hit the problems? button. download busy box and try again.
you can also verify root by downloading terminal emulator and opening it. when its open type SU and hit enter. # means root. $ means no root.
Click to expand...
Click to collapse
Ok, so I did update BusyBox, and now Titanium Backup doesnt show the error, also installed Terminal Emulator when you launch it the 1st line of text says"
$ export PATH=/data/local/bin:$PATH
$
On the 2nd line where the $ i typed SU and hit enter and it goes to the next line and displays # is this what its suppose to do?
Thanks
Ok, here is some things for you to try.
1. Make sure you are using the latest version of TB.
2. Make sure you hit Problems? and download Busybox 1.60 (whether or not the ROM you have is using 1.60 or not, do it anyhow.)
I assume you did those two based on what I read. So here is what else to try.
Upgrade Superuser to the latest version, then update the binary. Make sure Titanium backup is not blocked by going to Superuser and there should be a green circle next to TB, if it is red that means it is blocked. If it still doesn't work, remove it from Superuser and then have it ask for permissions again.
If STILL not working, take out your battery for around 10 seconds, plug it back in and try again. Lastly, uninstall and reinstall TB then do these steps all over again.
That is a bunch of stuff to try, see what happens and hope this helps
jontorres said:
Ok, so I did update BusyBox, and now Titanium Backup doesnt show the error, also installed Terminal Emulator when you launch it the 1st line of text says"
$ export PATH=/data/local/bin:$PATH
$
On the 2nd line where the $ i typed SU and hit enter and it goes to the next line and displays # is this what its suppose to do?
Thanks
Click to expand...
Click to collapse
That's exactly what it's supposed to do. $ is the prompt you get when you are a regular user. You get # when you are root.
If you type 'id' (without the quotes) now, you should get:
uid=0(root) gid=0(root)
ricsim78 said:
Upgrade Superuser to the latest version, then update the binary. Make sure
Click to expand...
Click to collapse
I launched Superuser, the one with the little niña guy, and it showed TB and the emulator both with green on the right side, but no idea how to "update" superuser, seeing as all appears to be ok should I still update it? If so, hoe would I do that? If not then I guess now my next step s finding the best 2.2 ROM that still keeps HTC Sense, any recommendations?
timdsmith72 said:
That's exactly what it's supposed to do. $ is the prompt you get when you are a regular user. You get # when you are root.
If you type 'id' (without the quotes) now, you should get:
uid=0(root) gid=0(root)
Click to expand...
Click to collapse
the prompt b4 I typed anything was $, after typing SU and enter it went to #
jontorres said:
the prompt b4 I typed anything was $, after typing SU and enter it went to #
Click to expand...
Click to collapse
Yep. That's what is supposed to happen. You are root when you have the # prompt.
Problem
I just flashed CM 7.1 stable version, i cant launched TB couldt aquire root privileges i read this post and typed SU in the terminal emulator and it came up with a $ sign. So that means im not rooted?
Any cure to get my phone rooted again but i want to keep CM 7.1 what should i do?
aks1081 said:
I just flashed CM 7.1 stable version, i cant launched TB couldt aquire root privileges i read this post and typed SU in the terminal emulator and it came up with a $ sign. So that means im not rooted?
Any cure to get my phone rooted again but i want to keep CM 7.1 what should i do?
Click to expand...
Click to collapse
Flash the super user zip from http://androidsu.com/superuser/
Should fix you up, not sure how you lost it, but this souls fix it nevertheless.
This thread is copied and modified from the G2 thread by trigeek for the Desire Z:
http://forum.xda-developers.com/showthread.php?t=834228
Apart from the changed hboot and wpthis-Z kernel module for the Desire Z instead of the G2, I have also updated the su-binary and SuperUser.apk to the latest version by ChainsDD
In no way I can be held responsible for any bricks to your phone. You are using this guide at your own risk!! I did test this guide on my own, and also on a friend's Desire Z.
As there was no manual rooting guide for the Desire Z, I posted it myself in order to help others that do not like visionary and like to do it 'the clean way'.
[GUIDE] Temp to permanent root on Desire Z, using rage instead of visionary
=================================================
There's already a guide here for obtaining permanent root using VISIONary, but some folks in #G2ROOT are having issues with the way that VISIONary modifies parititons. Using rage directly is a bit cleaner, since you know exactly what it's going to touch at each step of the way. I did NOT come up with any of this on my own, I'm building completely off of work that others have done. Speaking of which-
None of this would be possible without the tireless work that scotty2 put in. He stayed with the project for well over a month, through lots of smashed hopes and dead ends, until the solution was finally found. Were it not for his work, as well as the help of a few other key folks- we wouldn't be here. He deserves our thanks and some donations! We're talking hundreds of hours of work here, a couple bucks is not too much for that. His paypal is:
[email protected]
Send him some love! I'm not asking for anything myself, because I spent a half hour putting this together, and that doesn't deserve any donations!
DESIRE Z ROOT INSTRUCTIONS
=================================================
These are modified instructions based on the ones posted at http://bit.ly/g2root that use Visionary. A number of people have run into issues with the way that Visionary juggles around temporary partitions, and using the original root exploit is a much easier, and cleaner method for achieving permanent root. This tutorial will walk you through the rooting process by first achieving temporary root, and moving on to permanent root.
REQUIREMENTS
=================================================
•Visionary disabled at boot or uninstalled completely
•Android Terminal Emulator app
•ADB
•desirez-combined-root.zip (Attached to this post)
In the commands to run below, $ or # represent the prompt and should NOT be entered as part of the commands.
VERY IMPORTANT!
Visionary has caused filesystem corruption for some users during the rooting process. Before attempting the instructions below, make sure that you have "auto run on boot" turned OFF, and reboot your system. Since you will not need visionary anyway after this, you might as well just uninstall visionary and reboot NOW before doing anything.
TEMP ROOT
=================================================
ON YOUR PC:
Unzip the z-temp-root files to a folder. From a cmd window or terminal, navigate to that folder and execute these commands:
Code:
$ adb push su /sdcard/su
$ adb push Superuser.apk /sdcard/Superuser.apk
$ adb push rage /data/local/tmp/rage
$ adb push busybox /data/local/tmp/busybox
$ adb push root /data/local/tmp/root
$ adb shell chmod 0755 /data/local/tmp/*
ON YOUR PHONE:
1.Launch Terminal Emulator
2.
Code:
/data/local/tmp/rage
3.Wait for the message: "Forked #### childs."
4.Menu > Reset Term - Terminal Emulator will exit.
5.Launch Terminal Emulator, it Force Closes. Launch a second time, and you'll have a root shell
6.**NOTE**: in the original directions from the XDA thread, you are instructed to run the /data/local/tmp/root script here. DON'T do this just yet. Leave the terminal window open.
PERM ROOT
=================================================
ON YOUR PC:
unzip z-perm-root and navigate to that folder. There will be four files. You will need to push two of these to your phone: hboot_7230_0.84.2000_100908.nb0 and wpthis-Z.ko. The other two files are optional for checksum verification.
Code:
$ adb push hboot_7230_0.84.2000_100908.nb0 /data/local
$ adb push wpthis-Z.ko /data/local
Optional but might came in handy:
Code:
$ adb push md5checksum /sdcard/md5checksum
ON YOUR PHONE:
You should still have terminal emulator up, at a root prompt. Now run:
Optional but recommended:
Code:
# /data/local/tmp/busybox md5sum /data/local/*
You should see:
hboot_7230_0.84.2000_100908.nb0 2ce1bdd5e4c1119ccfcecb938710d742
wpthis-Z.ko c73c5e77c91d306c418983c002b60b93
In case your hboot or wpthis-Z.ko file do not have the same md5hash as shown above, DO NOT CONTINUE. This means your file is corrupt or you are using a different file, for example the one for the G2 instead of Desire Z.
Now, let's turn off security for permanent flashing:
Code:
# insmod /data/local/wpthis-Z.ko
init_module 'wpthis-Z.ko' failed (Function not implemented)
That means it worked. This next step is CRUCIAL. You must make sure that you are writing to the proper partition here or you could brick your phone. To be absolutely clear- the partition is mmcblk(zero)p(one)(eight)
# dd if=/data/local/hboot_7230_0.84.2000_100908.nb0 of=/dev/block/mmcblk0p18
Click to expand...
Click to collapse
You should see some messages indicating that it was written.
Code:
# /data/local/tmp/root
This will lock in root, and give you 'su' access in the future. Next, run:
Code:
# sync
Now wait at least a minute, just to be safe. After waiting, reboot your phone using the power button. After it finishes starting up, launch the terminal emulator, and type 'su'. You should get the prompt asking you to grant permissions. If you got the prompt, congratulations! You have permanent root!
Nice guide, thanks
Thank you Mr Q. works like a charm!
first of all.. thanks for this great guide. Everything went perfect until I came to the step to lock in root. After the command "/data/local/tmp/root" I get this error:
mkdir failed for /system/xbin, File exists
when I just ignore it and type sync after that I have no root acces after a reboot.
Does anybody have a solution for it? I have already done a hardreset with the same results.
thanks in advance...
So this only roots your phone? Or does it s-off as well? From what I understand this s-offs as well because you're pushing the hboot as well.
EDIT: Nevermind. I read the thread again and it does indeed s-off as well.
MarDor said:
first of all.. thanks for this great guide. Everything went perfect until I came to the step to lock in root. After the command "/data/local/tmp/root" I get this error:
mkdir failed for /system/xbin, File exists
when I just ignore it and type sync after that I have no root acces after a reboot.
Does anybody have a solution for it? I have already done a hardreset with the same results.
thanks in advance...
Click to expand...
Click to collapse
Everything was fine up until this point. So i restarted the phone and phone is stuck on the "quietly brilliant" screen
ssyed said:
Everything was fine up until this point. So i restarted the phone and phone is stuck on the "quietly brilliant" screen
Click to expand...
Click to collapse
having the same issue here
So I'm looking into these S-OFF and rooting threads and here is two bricks too. Does anyone have an answer for these two or should I skip this? Did the hboot do this or was it due to some problem in inserted kernel module? (I.E. the reboot of the emmc controller resulted in a ****ed up file system?)
yelti said:
having the same issue here
Click to expand...
Click to collapse
AnyDone said:
So I'm looking into these S-OFF and rooting threads and here is two bricks too. Does anyone have an answer for these two or should I skip this? Did the hboot do this or was it due to some problem in inserted kernel module? (I.E. the reboot of the emmc controller resulted in a ****ed up file system?)
Click to expand...
Click to collapse
Ok, so I have figured out how to get out of this "quietly brilliant" loop.
First of all, this isn't a brick and all that is needed to fix this is a quick factory reset from the bootloader.
ssyed said:
First of all, this isn't a brick and all that is needed to fix this is a quick factory reset from the bootloader.
Click to expand...
Click to collapse
Ok, so does any one have an explanation why this happened?
1. It wasn't wrong or screwed hboot, otherwise we would be facing a real brick?
Was it the root method? Was it the wpthis-Z.ko?
It might have been the kernel module, but I can't be sure about that with so little knowledge I have. (sure not the module itself but the kick to the emmc?) Just that it seems to be more likely option than a rooting attempt on a cached r-o file system?
I'm not complaining about the guide, it is specific and easy to follow but I would really love to have these semi bricks etc inspected more closely. It is not really helping to encourage ppl to root and try safe-off when we have unexplained bricks and semi-bricks around
MarDor said:
first of all.. thanks for this great guide. Everything went perfect until I came to the step to lock in root. After the command "/data/local/tmp/root" I get this error:
mkdir failed for /system/xbin, File exists
Click to expand...
Click to collapse
ssyed said:
Everything was fine up until this point. So i restarted the phone and phone is stuck on the "quietly brilliant" screen
Click to expand...
Click to collapse
yelti said:
having the same issue here
Click to expand...
Click to collapse
Did you guys run Visionary before trying this "rage" method of rooting ?
steviewevie said:
Did you guys run Visionary before trying this "rage" method of rooting ?
Click to expand...
Click to collapse
I don't know about others, but I didn't on mine. I was rooting it for the first time. Also, I don't know if this has anything to do with it, but I have the Bell version from Canada.
The root script threw an error for me too, so just to be safe I opened the script and typed in the commands manually. If you have problems with the script, just run these commands from the root terminal on your phone:
Code:
/data/local/tmp/busybox killall rage
mount -o rw,remount -t ext3 /dev/block/mmcblk0p25 /system
mkdir /system/xbin
/data/local/tmp/busybox cp /data/local/tmp/busybox /system/xbin/busybox
chmod 4755 /system/xbin/busybox
/system/xbin/busybox --install -s /system/bin
cp /sdcard/Superuser.apk /system/app/Superuser.apk
cp /sdcard/su /system/bin/su
chmod 4755 /system/bin/su
mount -o ro,remount -t ext3 /dev/block/mmcblk0p25 /system
sync
"mkdir /system/xbin" just creates a directory, if it already exists you can ignore this command and proceed.
Hope this helps someone.. Thanks to the OP for the scripts.
Have a quick look, /system/xbin already seems to exist on my phone too.
So is there an error in the script ? e.g. needs to ignore if the directory already exists ? Or am I (we ?) missing something ?
goldenarmZ said:
"mkdir /system/xbin" just creates a directory, if it already exists you can ignore this command and proceed.
Click to expand...
Click to collapse
Good info, thanks. Perhaps just comment out that line of the script, to save running it all by hand (and therefore be prone to more error ?) ?
steviewevie said:
Good info, thanks. Perhaps just comment out that line of the script, to save running it all by hand (and therefore be prone to more error ?) ?
Click to expand...
Click to collapse
I did that first.. it threw more errors with the mount commands because I'd already run the script once, so some of the commands were repated. If it's your first run through, commenting it out would be fine.
I only did it line by line so I could see any more errors for myself and decide if they were important. As it turns out the script is very simple and only involves moving files around and changing their permissions.. anything that goes wrong should be immediately apparent even if you have no experience with shell commands.
goldenarmZ said:
I only did it line by line so I could see any more errors for myself and decide if they were important. As it turns out the script is very simple and only involves moving files around and changing their permissions.. anything that goes wrong should be immediately apparent even if you have no experience with shell commands.
Click to expand...
Click to collapse
Thanks, I was starting to worry about the bad experiences outlined above, given that this method appeared to be a more reliable one than VISIONary, and a route I was going to go down. But I'm pretty comfortable with shell scripts, so your input makes me feel a whole lot better !
goldenarmZ said:
The root script threw an error for me too, so just to be safe I opened the script and typed in the commands manually. If you have problems with the script, just run these commands from the root terminal on your phone:
-code-
"mkdir /system/xbin" just creates a directory, if it already exists you can ignore this command and proceed.
Hope this helps someone.. Thanks to the OP for the scripts.
Click to expand...
Click to collapse
thanks for this... I will give it a try
Yay, I just perma-rooted my phone using this method, many thanks to those who came up with the method in the first place, plus this handy guide too.
I got the message about /system/xbin already existing, but you can just ignore that message, it runs the rest of the script anyway.
ssyed said:
Ok, so I have figured out how to get out of this "quietly brilliant" loop.
First of all, this isn't a brick and all that is needed to fix this is a quick factory reset from the bootloader.
Click to expand...
Click to collapse
So after doing the guide you simply reeboot your phone into bootloader and select factory reset?
And then will the device be perm root and s-off???
If on Recovery, it says S-ON, is that a Problem?
triumphantpower said:
If on Recovery, it says S-ON, is that a Problem?
Click to expand...
Click to collapse
If it says S-ON, you don't have permaroot. Did you follow the guide in the wiki?
Sent from my T-Mobile G2 using XDA App
I watched a Video from BlackPrince310. I got far into it, until I had to use the Terminal. I'm not sure what Wiki are you talking about.. Link?
(Thank You for the speedy reply btw)
triumphantpower said:
I watched a Video from BlackPrince310. I got far into it, until I had to use the Terminal. I'm not sure what Wiki are you talking about.. Link?
(Thank You for the speedy reply btw)
Click to expand...
Click to collapse
YouTube *really* shouldn't be the go to for things like this, unless you like bricks. This guide is by the folks who actually engineered the hack: http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
Sent from my T-Mobile G2 using XDA App
oh alright, Thank You OriginalGabriel.
But is rage an adb command or an app from the Market?
and where would the HTC G2 Drivers have to be installed?
triumphantpower said:
and where would the HTC G2 Drivers have to be installed?
Click to expand...
Click to collapse
If you've used adb (eg. you have the SDK installed on your computer), then you have the drivers already installed. Otherwise, unzip the file and when you plug your computer into your phone, point the hardware wizard to the folder that you unzipped
Rage is an included binary in gfree_temp-root.zip
Got it Thank You.
I got to where I have to use ADB, and while trying to $ adb push su /sdcard/su
It won't let allow me, it'll say access denied. (I've even put adb shell before that command)
I type in adb shell:
*daemon not running. starting it now on port 5037*
*daemon started successfully* and then any other command I type after that is Denied
triumphantpower said:
I type in adb shell:
*daemon not running. starting it now on port 5037*
*daemon started successfully* and then any other command I type after that is Denied
Click to expand...
Click to collapse
on your phone be sure you have menu>settings>applications>development>usb debugging checked (on)
I do. Using this Tutorial: http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
I got all the way to the Permaroot Section. When I have to issue these commands:
# cd /data/local
# chmod 777 gfree
# ./gfree -f
#sync
my phone reset before I got to type sync.
And before I got the chance to type the next lines of text, I had to turn on my phone issued them and got an error message of file exists and something else. I Booted my phone and it still says SHIP S-ON
triumphantpower said:
I do. Using this Tutorial: http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
I got all the way to the Permaroot Section. When I have to issue these commands:
# cd /data/local
# chmod 777 gfree
# ./gfree -f
#sync
my phone reset before I got to type sync.
And before I got the chance to type the next lines of text, I had to turn on my phone issued them and got an error message of file exists and something else. I Booted my phone and it still says SHIP S-ON
Click to expand...
Click to collapse
After you do the temp root, shut down adb (I am using a windows machine so I ctrl alt del and find it in task manager and shut it down that way) It should restart by itself when you do the perm root commands. ( you probably know this, but don't enter the # sign, it should be there by itself)
Thank You sooo much! I got the S-Off now finally, thank you very much!
Is there anything else I should do before I decided to Install a Custom ROM? Can I install a ROM from this Recovery? or Do I need to do a further step. According to the Tutorial I have Perm Root now but I've never used this Recovery before
triumphantpower said:
Thank You sooo much! I got the S-Off now finally, thank you very much!
Is there anything else I should do before I decided to Install a Custom ROM? Can I install a ROM from this Recovery? or Do I need to do a further step. According to the Tutorial I have Perm Root now but I've never used this Recovery before
Click to expand...
Click to collapse
Download ROM manager from the market, spend the few bucks for the upgrade and then install clockworkmod recovery through ROM Manager (if you haven't done this already). Then, do some more reading about doing a Nandroid backup and you're ready to go! Now, the fun begins....lol!
I don't mind buying ROM Manager Premium but can I do that with the Free Version? I downloaded the Free Version of ROM Manager v3.0.0.7 and when I selected Flash Clockwork Mod Recovery it gave me "an error occurred while attempting to run privileged commands!". Does the Paid Version go past that or am I missing something?
triumphantpower said:
I don't mind buying ROM Manager Premium but can I do that with the Free Version? I downloaded the Free Version of ROM Manager v3.0.0.7 and when I selected Flash Clockwork Mod Recovery it gave me "an error occurred while attempting to run privileged commands!". Does the Paid Version go past that or am I missing something?
Click to expand...
Click to collapse
do you have the superuser app now in your applications drawer?
edit: Also, disconnect the phone from the USB. That might give ROM manager a problem accessing your sd card if you're still connected.
yeah I have Superuser Permissions but it FC's when you try to open it
triumphantpower said:
yeah I have Superuser Permissions but it FC's when you try to open it
Click to expand...
Click to collapse
Try uninstalling ROM Manager and after that see if you still get a force close when you try to open Superuser.
Interesting Idea. I tried it, and still the same. Superuser FC's @[email protected]
triumphantpower said:
Interesting Idea. I tried it, and still the same. Superuser FC's @[email protected]
Click to expand...
Click to collapse
what happens when, in ROM Manager, you select "fix permissions"?
About 3 hours ago, I won a Desire Z (wheeey!) at the HTC London meetup. Naturally, I came straight here after the help I got in January rooting my Desire.
I used the Visionary method and obtained temp root status, and then attempted perm root, which seemed to work. All of the guides I have read include a bunch of steps after this, one of which included deleting Visionary, which I then did. I just turned the phone off, took the battery out for a bit and then turned it back on. I still have the Superuser icon and the Terminal Emulator indicates that I have root access... is that it then? It's that simple?
Please tell me if I've done anything wrong, as I don't want to flash Cyanogen and Clockwork Recovery if it's all going to go to hell on me. Any advice or confirmation on whether or not I've obtained perm root would be lovely.
Oh, my firmware version is 1.34.405... etc. Is this simply the last version which allows for such easy root?
Arconaught said:
About 3 hours ago, I won a Desire Z (wheeey!) at the HTC London meetup. Naturally, I came straight here after the help I got in January rooting my Desire.
I used the Visionary method and obtained temp root status, and then attempted perm root, which seemed to work. All of the guides I have read include a bunch of steps after this, one of which included deleting Visionary, which I then did. I just turned the phone off, took the battery out for a bit and then turned it back on. I still have the Superuser icon and the Terminal Emulator indicates that I have root access... is that it then? It's that simple?
Please tell me if I've done anything wrong, as I don't want to flash Cyanogen and Clockwork Recovery if it's all going to go to hell on me. Any advice or confirmation on whether or not I've obtained perm root would be lovely.
Oh, my firmware version is 1.34.405... etc. Is this simply the last version which allows for such easy root?
Click to expand...
Click to collapse
Having the SuperUser icon just means the app is installed, open up terminal and type 'su' to see if it throws up any errors
Sent from my HTC Vision using XDA App
I should have mentioned that I did that and got the # symbol, am I good to go?
Arconaught said:
I should have mentioned that I did that and got the # symbol, am I good to go?
Click to expand...
Click to collapse
In theory, yes; in practice, no. Visionary (with the G2/Desire Z, at least) is known to be a bit buggy. You shouldn't have any issues installing custom ROMs but, I would recommend using the wiki method to root.
Sent from my HTC Vision using XDA App
OriginalGabriel said:
In theory, yes; in practice, no. Visionary (with the G2/Desire Z, at least) is known to be a bit buggy. You shouldn't have any issues installing custom ROMs but, I would recommend using the wiki method to root.
Click to expand...
Click to collapse
My understanding, if he already used Visionary to root, and it worked than he should be good to go. Either it works, or it doesn't. The risk with Visionary is that it sometimes corrupts some partitions, which causes the phone to not boot. I haven't read any conclusive reports on Visionary causing long term issues (correct me if I'm wrong).
redpoint73 said:
My understanding, if he already used Visionary to root, and it worked than he should be good to go. Either it works, or it doesn't. The risk with Visionary is that it sometimes corrupts some partitions, which causes the phone to not boot. I haven't read any conclusive reports on Visionary causing long term issues (correct me if I'm wrong).
Click to expand...
Click to collapse
This is my understanding as well, though I'd probably still use GFREE to get S-OFF if I were OP.
That's my next question, I'm using this guide ( http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_G2 ) to try and get S-Off to flash Cyanogen and I'm wondering what step to start on, assuming from your replies that I'm rooted already.
I know it's a bit of a dumb question, but I just don't wanna fudge my new phone.
Arconaught said:
That's my next question, I'm using this guide ( http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_G2 ) to try and get S-Off to flash Cyanogen and I'm wondering what step to start on, assuming from your replies that I'm rooted already.
I know it's a bit of a dumb question, but I just don't wanna fudge my new phone.
Click to expand...
Click to collapse
I used the wiki method myself, those that used other methods (like Visionary) and were told to root via the wiki seem to have all just started at the beginning, from what I've read.
Sent from my HTC Vision using XDA App
Arconaught said:
That's my next question, I'm using this guide ( http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_G2 ) to try and get S-Off to flash Cyanogen and I'm wondering what step to start on, assuming from your replies that I'm rooted already.
I know it's a bit of a dumb question, but I just don't wanna fudge my new phone.
Click to expand...
Click to collapse
Whoa the Wiki method is completely different, looks like it was rewritten on 04/01.
You can completely ignore the temp rooting steps and concentrate on the gfree steps
From the "Necessary Files" section you need gfree, flash_image and ClockWorkMod Recovery
I would use the latest ClockWorkMod recovery rather than the one listed on the Wiki:
http://mirrorbrain.cyanogenmod.com/cm/recoveries/recovery-clockwork-3.0.2.4-vision.img (of course it's only the latest as of the time of this writing)
From step 2 you need to use:
Code:
$ adb push gfree /data/local/tmp/
$ adb push flash_image /data/local/tmp/
From step 2.a you need to use:
Code:
$ adb push recovery-clockwork-3.0.2.4-vision.img /data/local/tmp/recovery.img
Again note that the file name for CWM will depend on the version of CWM you are using.
Skip to step 4.b you need to use:
Code:
# cd /data/local/tmp
# ./gfree -f
# ./flash_image recovery recovery.img
# sync
Continue on as normal from here.
I skipped the temp root and perm root sections as you are already perm root.
I also skipped the ENG HBOOT parts, since that's not strictly necessary and the most risky part of the whole process (one mistake can result in a brick). If you want to flash the ENG HBOOT you would need to follow steps 4.a instead of 4.b, (you would also need the necessary HBOOT of course) the only command you need to omit from 4.a or 4.b is "# ./root_psn" which is the script which establishes permanent root.
Thanks a lot so far man, but I'm still stuck. I have adb, when I open it in the SDK, it flows for a bit, then closes. This is right, right? I'm meant to do all of these prompts via the cmd window?
OK, I've now sorted adb, but I can't get anything to work past that. Nothing will transfer to my phone and I'm going to kill... somebody.
Arconaught said:
OK, I've now sorted adb, but I can't get anything to work past that. Nothing will transfer to my phone and I'm going to kill... somebody.
Click to expand...
Click to collapse
You say you've sorted adb, but can you be more specific please ? What works and what doesn't work exactly ?
Ah, yeah, sorry. I got to the point where when I type in "adb devices" in the command window, it shows me my phone, with the serial number and whatnot. However, whenever i try the command:
$ adb push gfree /data/local/tmp/
It just won't work. I have all the files together in my desktop at the moment, having moved them from the downloads folder on my laptop. Is there a specific place I should have the stuff I need to send to my phone?
There is a great write up here about getting adb working. It sounds like either you didn't set up a "path" to use those commands anywhere or if you don't want to do that make sure your files are in the same folder as your adb.
Sent from my HTC Vision using XDA App
Arconaught said:
Ah, yeah, sorry. I got to the point where when I type in "adb devices" in the command window, it shows me my phone, with the serial number and whatnot. However, whenever i try the command:
$ adb push gfree /data/local/tmp/
It just won't work. I have all the files together in my desktop at the moment, having moved them from the downloads folder on my laptop. Is there a specific place I should have the stuff I need to send to my phone?
Click to expand...
Click to collapse
You need to have the files (extracted from the ZIP files you downloaded) in the same folder you run the ADB commands, if your ADB is in your path you should be able to run ADB commands from any folder.
To summarize you need to extract all the zips you downloaded under necessary files, all to the same folder. The open a command prompt and CD to that folder before you start using your adb push commands.
shortlived said:
There is a great write up here about getting adb working.
Click to expand...
Click to collapse
Yeah, steviewevie wrote it:
http://forum.xda-developers.com/showthread.php?t=865685
But it looks like he is willing to give the OP some personalized help.
Right, thanks guys, I think I'm making some progress.
ADB is all set up, and as far as I'm aware, having:
program files > android sdk > platform tools
on my path should mean I can open adb from anywhere right? I have all of the extracted files in platform tools, where adb is, in my program files... is this right, or have I completely missed the point here?
I keep getting "cannot stat 'gfree':: No such file or directory"
Sorry, I seem really stupid concerning this whole thing, but I'm sure it's something equally obvious that I'm just not seeing.
New problem. I worked out what I'd done wrong there, and got everything onto my phone. However, when trying to change the directory to /data/local/tmp, I keep getting "The system cannot find the path specified"
Now what am I doing wrong?
Arconaught said:
New problem. I worked out what I'd done wrong there, and got everything onto my phone. However, when trying to change the directory to /data/local/tmp, I keep getting "The system cannot find the path specified"
Now what am I doing wrong?
Click to expand...
Click to collapse
Remember you are running those commands (everything in that section) from an ADB shell, not from the Windows command prompt.
Excuse my ignorance, but what exactly do you mean by that? What should I do?
hi ive been trying to downgrade through this link
http://forum.xda-developers.com/showthread.php?t=905003
ive done everything it says and i type in the following
adb push psneuter /data/local/tmp
adb push misc_version /data/local/tmp
adb shell chmod 777 /data/local/tmp/psneuter
adb shell chmod 777 /data/local/tmp/misc_version
adb shell /data/local/tmp/psneuter
the problem i have is with the last one the computer says
failed to set prot mask< innapropriate ioctl for device>
please help me...
try THIS guide, it's quite simple.
Plz help Hardcore_xXx
HardCore_xXx said:
try THIS guide, it's quite simple.
Click to expand...
Click to collapse
I went ahead with this thread that you suggested .
But in the end of "Downgrade" step, after 5th step,
I get an error saying "Main version is older, Update fail" It doesnt go till the (confirm if you want to install this rom- step).
I am a noob at this and this is my first time trying to root my phone.
Btw, I have a Desire Hd with 2.3.3 and build version 2.37
Please help me downgrade it and then I will proceed to root as mentioned in the above link
You do not have to create GOLDCARD if your device is not branded (orange, vodafone and such), so you can just use your regular sd card.
that guide works 100%, just read carefully.
HardCore_xXx said:
You do not have to create GOLDCARD if your device is not branded (orange, vodafone and such), so you can just use your regular sd card.
that guide works 100%, just read carefully.
Click to expand...
Click to collapse
So you mean to say that I should just ignore the goldcard step and start with placing the zip file in the root and executing 'Run this for downgrade' step..?? (After temproot step ofcourse)
HardCore_xXx said:
You do not have to create GOLDCARD if your device is not branded (orange, vodafone and such), so you can just use your regular sd card.
that guide works 100%, just read carefully.
Click to expand...
Click to collapse
So you mean to say that I should just ignore the goldcard step and start with placing the zip file in the root and executing 'Run this for downgrade' step..?? (After temproot step ofcourse )
cocopops192 said:
hi ive been trying to downgrade through this link
http://forum.xda-developers.com/showthread.php?t=905003
ive done everything it says and i type in the following
adb push psneuter /data/local/tmp
adb push misc_version /data/local/tmp
adb shell chmod 777 /data/local/tmp/psneuter
adb shell chmod 777 /data/local/tmp/misc_version
adb shell /data/local/tmp/psneuter
the problem i have is with the last one the computer says
failed to set prot mask< innapropriate ioctl for device>
please help me...
Click to expand...
Click to collapse
@cocopops192
try the method hardcore_xXx suggested.
I had problem in the first trial,
But i just tried it again, and what do you know.. IT worked like a charm..
Try it again and let me know how it goes..
@hardcore_xXx
Thank you man.
I came home and tried it once, And IT WORKED...
Thank you once again.
kush4u123 said:
So you mean to say that I should just ignore the goldcard step and start with placing the zip file in the root and executing 'Run this for downgrade' step..?? (After temproot step ofcourse )
Click to expand...
Click to collapse
exactly. as i said, goldcard is only for branded devices.
kush4u123 said:
@cocopops192
try the method hardcore_xXx suggested.
I had problem in the first trial,
But i just tried it again, and what do you know.. IT worked like a charm..
Try it again and let me know how it goes..
@hardcore_xXx
Thank you man.
I came home and tried it once, And IT WORKED...
Thank you once again.
Click to expand...
Click to collapse
Not a problem, i like to help when i can. just hit the Thanks button
I have similar problems. My latest problem being when i follow the gingerbread part cmd codes, I get to the last one before temproot and it does its stuff.. the only # i get is at the start of the results being "fre3vo by #teamwin"... the last thing in the results, is says "running exploit" then waits for my next command...
so i try the second to last command (cd /data/local/tmp) after you get the # ... Which im pretty sure i didnt because i get "path not specified" !! i think it may just me being dumb somewhere along the line..
but any helps appreciated!
if you follow those guides i linked you can't go wrong. be sure to follow step by step and read carefully.
Ok.. well il give it another go... i'l create the goldcard again.. i didnt bother doing that after the first time.. i thought once done it was done. but i may have mucked up somewhere so from scratch is the way forward..
Thanks
p.s im 2.3.3 is fre3vo the correct option?...
i saw on another forum, in the cmd codes it was gingerbreak rather than fre3vo or psneuter.. if im doing it wrong where can i get the gingerbreak file ?
Thanks again!
Eventually got downgraded to stock 1.32.. now perm rooted.. next CUSTOM ROM!
there ya go i told you it will work