Hello all,
I need to connect to a non-standard tsc (rdp) port, I am trying to connect to myserver.test.co.uk:1500 but this doesnt seem to work.
i can only make successful connection without mentioning the specific port1500)...does anyone have any experience on how this could be achieved?
I have a pda2k with 1.40 rom
thanks.
Hello,
first of all, i want to thank you all for this great forum.
I have a small problem. I have bought a few days a HTC P3600. Everything was working fine.
Yesterday i tried to upgrade to wm6 using MARY 3.4.1 with sucess following the upgrade guide in trinityguides.info.
I have installed the Des’ Crash-Proof SPL and then flash the MARY 3.4.1 ROM.
Until now everything is working fine except the active sync. I tried to AS with the usb cable but it won't connect. It gives me the following error:
"Communication Error:Cannot start communications with the desktop computer. Remote Networking could not start due to a critical error (Error 608). Please reconnect your device. If the problem persists, restart your device using the instructions provided by the manufacturer."
I've googled it and tried all the suggestions that i could find, with no success.
If i connect via BT there is no problem.
The problem is that i want to put back the official ROM from HTC and if i can't connect with active sync via usb, i can't restore it.
BTW, if i put back the official ROM, the Hard-SPL is also flashed to the original??
Thank you
cabexas said:
Hello,
first of all, i want to thank you all for this great forum.
I have a small problem. I have bought a few days a HTC P3600. Everything was working fine.
Yesterday i tried to upgrade to wm6 using MARY 3.4.1 with sucess following the upgrade guide in trinityguides.info.
I have installed the Des’ Crash-Proof SPL and then flash the MARY 3.4.1 ROM.
Until now everything is working fine except the active sync. I tried to AS with the usb cable but it won't connect. It gives me the following error:
"Communication Error:Cannot start communications with the desktop computer. Remote Networking could not start due to a critical error (Error 608). Please reconnect your device. If the problem persists, restart your device using the instructions provided by the manufacturer."
I've googled it and tried all the suggestions that i could find, with no success.
If i connect via BT there is no problem.
The problem is that i want to put back the official ROM from HTC and if i can't connect with active sync via usb, i can't restore it.
BTW, if i put back the official ROM, the Hard-SPL is also flashed to the original??
Thank you
Click to expand...
Click to collapse
Try an other usb port on your computer.
And yes, offical rom restore everything (ipl,spl,radio,os)
I have already tried that.
The only thing that i can remember that i didn't tried, is connect in a different computer, but i will try that as soon as i get home.
thanks
try another ROM. got that activesync issue also with every Mary ROM.
You can find it in UDK rom thread
Active Sync Error 608
Try this to solve the problem:
Quote:
Originally Posted by nanni100
I solved cause my Windows Firewall was damaged and not customizable, then i found a reg file to solve this problem, installed on pc and reboot. On startup i saw the window of Win Firewall who asked me to unlock Activesync i said yes and turn off the firewall
I have a ethernet router with DHCP enabled
Then i configured the phone:
-Enabled Advanced Netword Function
-Go on Setup, Wi-Fi, Network, Remote HOST- NDIS
-Select the Specific IP Address like this:
IP Add: 169.254.2.1
Sub Mask: 255.255.0.0
Gateway: 169.254.2.2
and on the other page put only on the first DNS: 169.254.2.1
on the pc lan connection i leave the dhcp enabled "Obtain IP Address from serv" also for DNS (obviously cause i have the DHCP enabled on my router)
And MAGICLY all start works FINE!!!
After hours and hours spent on configurations, the problem was "simply" the windows firewall, but also the configuration of Remote Host-NDIS is important
Hope that can be useful for other
Right now i don´t have the MARY rom but the TUGA V3 ROM and problem continues. I have already tried to setup Remote HOST- NDIS like that and it didn´t work too.
Anyway thanks for all your help.
Thanks
Use the SD Card Method...
I use the SD Card Method. MUST BE FORMATTED AS FAT32 first. (As per willowxda's post. Thanx Willowxda)
Copy SSPL_TRIN.exe to your SD card's Root folder. (Included in ZIP File)
Rename the RUU_signed.nbh file in your OEM Rom to TRINIMG.nbh
Copy TRINIMG.nbh to your SD card's Root folder.
Run SSPL_TRIN.exe from your device.
Allow it to Flash and Restart as needed.
Works like a charm...
cabexas said:
Hello,
first of all, i want to thank you all for this great forum.
I have a small problem. I have bought a few days a HTC P3600. Everything was working fine.
Yesterday i tried to upgrade to wm6 using MARY 3.4.1 with sucess following the upgrade guide in trinityguides.info.
I have installed the Des’ Crash-Proof SPL and then flash the MARY 3.4.1 ROM.
Until now everything is working fine except the active sync. I tried to AS with the usb cable but it won't connect. It gives me the following error:
"Communication Error:Cannot start communications with the desktop computer. Remote Networking could not start due to a critical error (Error 608). Please reconnect your device. If the problem persists, restart your device using the instructions provided by the manufacturer."
I've googled it and tried all the suggestions that i could find, with no success.
If i connect via BT there is no problem.
The problem is that i want to put back the official ROM from HTC and if i can't connect with active sync via usb, i can't restore it.
BTW, if i put back the official ROM, the Hard-SPL is also flashed to the original??
Thank you
Click to expand...
Click to collapse
it is very simple but it took me too long time to figure out.
My PC hangs several times, I thought it is related to DMA or to IRQ interrupt requests for the microproccessor, but failed to solve it. This problem never happened to me while I was having the Qtek ppc, and even when I used the official HTC ROM when I bought this TrinTy. Then I started to check everything related to USB connection till I catch it. it is very silly, just to clear one checkbox.
Here what worked for me:
Click Start > Settings > Connections > USB to PC
you will find a checkbox......Just uncheck it. --------> Thats to disable advanced network functionality.
I believe it should work for you.
Try POWER + CAMERA + SOFTRESET (this enter the bootloader mode) and then install the ROM you like ... you will get no errors !!!
Click Start > Settings > Connections > USB to PC
you will find a checkbox......Just uncheck it. --------> Thats to disable advanced network functionality
Click to expand...
Click to collapse
That was the first things that i tried to do, but with no luck.
Yesterday, i did what nightfear suggested and it worked fine.
As soon as i restored the official rom, AS started to work like a charm.
That is a strange issue, but for now it's resolved.
Lets see if the problem doesn't come back when i put WM6 on it again.
Thank you all for your help.
Mini SD card must be formatted in FAT32 for flash update to work
I have been trying to upgrade flash via SDCard but it did not work no matter how hard I tried (switch btw hardspls).
Then I realised that I have to format the SDCard to FAT32 so that the Hard SPL can recognise the card in bootloader prompt.
I am using Hard SPL 1.30
Hi, i've rooted my phone with r3.1 paul's rom. I tried installing wired tether apk to use but failed. I want to use it because the in-built internet sharing needs htc sync installed while the other just plug in and let windows install the necessary driver without addition htc sync installation. Is it because the necessary kernel is not installed? Just want to ask is there any way to do it?
Thank you
Hi All
Although I've been around Linux since Red Hat 4 and have worked with pocket pc's and phones since the halcyon days of pocket pc 3 (old cassiopeia E125's, hp journada and the like) I have only been an android user for about 60 hours!, coming in from WM6.1 on a Raphael.
In order to get my Desire ready for my business use I have 2 things that I need to resolve with a fair degree of urgency. But admit that trying to do so has lead to both "roadmap" questions and technical issues.
I need to get openvpn running on my desire, along with Bluetooth PAN based networking. I have a workaround for this week in so far as I have my Linux Netbook tethered via USB to my Desire, and run openvpn from an xterm but the way my business works, I need to get that built into the desire - The "needs" driver fro the bluetooth modem is working with a customer supplied laptop where I am supposed to read my "corporate" email using my own modem , but am not allowed to connect any USB data device / install any 3rd party software to the laptop (go figure!!!!) the "customer laptop" has bluetooth but no wifi (card removed and a business specific card in its place)
SO... step one seemed to be "root the desire"
This I have done. It was an 0.80 / 1.21.. build device and seems to be fine
However, I am mindfull that froyo is around the corner and also that since rooting the device I am getting notifications of updates, so my first questions are:
1) can I safely apply the OTA updates on my rooted device please?
2) when (if?) the "official" froyo release comes out, can I safely upgrade to that
and retain root privileges ?
3) is it worth going the "cooked rom" route to obtain froyo more quickly please ? or is it sufficient to install A2SD and resove my core need for it ?
Step 2 was to install some software to enable bluetooth PAN based Network sharing...
I have tried a couple of apps
pdanet specifically says that it uses (when you set the appropriate option) bluetooth PAN, but my ubuntu lucid based netbook on ever finds the DUN (dial up networking) profile
the paid version of bluTether (or was it tetherBlu ?) refuses point blank to start so has been uninstalled. Need to either contact the developer or get a refund
So my next questions are :
3) Is there an app that someone has used successfully, with an ubuntu lucid based pc, to bluetooth PAN tether their netbook to their desire droid please ?
4) Is there a howto (as I haven't found it when googling) please ?
perhaps the most important oen to crack for me though is openvpn.
I have installed the openvpn app and gui from the market, but I read here that the desire does things differently and that I need a zip file with some updates and the "recovery console" to enable them and resolve the issues with a shell script.
try as I might - I cant find a reference to this "recovery console" , it sounds like it gives shell access to the desire either locally or remotely so ...
5) can someone please explain where I find the recovery console ?
many thanks in advance
cheers!
MW0CQU
I'll answer some of your questions for you, the rest I'll leave to someone who knows more
1) can I safely apply the OTA updates on my rooted device please?
2) when (if?) the "official" froyo release comes out, can I safely upgrade to that
and retain root privileges ?
3) is it worth going the "cooked rom" route to obtain froyo more quickly please ? or is it sufficient to install A2SD and resove my core need for it ?
Click to expand...
Click to collapse
You can install an OTA update on a rooted handset, but you will lose root. If you use a custom rom, you will not be able to install an OTA update.
It depends on what you want from a Froyo rom. There are a few fairly stable ones, but none work 100% yet. The closest to 100% would be DJ Droid froyo with sense rom.
So if stability is a concern I'd personally go for Pays 2.1 rom with A2SD.
Edit: the recovery console is a custom recovery that you either flash to the handset using the unrevoked method, or via an update.zip file on the root of your SD card. Another is via a market app. called Rom Manager.
There was an older method of pushing the recover to the handset via usb, but this can lead to the usb brick so should be avoided.
Do a search on fakeflash or unrevoked.
Hi!
I have a problem with the bluetooth connection on my Desire. First things first:
- I use the MIUI rom
- I have a Win7 x64 laptop with Intel 1030 adapter for wifi and bluetooth
- Driver on my laptop is the generic microsoft bluetooth driver, i cannot find any other driver.
- I want to use the program "unified remote" over bluetooth to control xbmc on my laptop.
Problems:
- I can find the Desire with the laptop and succesfully pair the device.
- After completing the initial pairing, the windows wizard tells me that it will try to find additional drivers.
- I can pair but not "connect" to the laptop. In fact I cannot use the connection to do anything.
Is there anyone who has a solution for this problem? If I have to change rom, no problem, because I really want this to work. Eternal gratitude will be your share!
chances are that your current rom doesn't support bluetooth yet. check the thread on xda for whatever rom you are using, and see if it says whether or not bluetooth is working yet.