flashed rom and now stuck on splash screen - Desire Q&A, Help & Troubleshooting

I flashed my Alltel Desire with Gingervillian 1.0. When it finished it said it was successful, so I rebooted and now it's stuck on the Alltel splash screen. I tried wiping data/cache/dalvic and rebooting. Even taking out the battery and sd card. Nothing is working and I'm really pissed :/ It sucks going from an amazing Desire to an lg scoop, which is what I'm having to use now.
Any help?
Yes, I have searched the forum, but other people are using diff roms and having a few other problems. I just want to make sure I take the right advice!

Make sure the md5 of the download matches, then do another full wipe and reflash.

Ok thanks, but how do I do that? Lol

Ok I found the md5 of the download, but what do I match it too?

Ok, I found a md5 checksum checker and found out that the download did not match. I downloaded another one and now they match. Can I delete the old download off the sd card? Or what do I do?

yes, delete the old one. put the new one on your sd and flash again.
dont forget to do factory data wipe and clear dalvik cache.
you should be good (fingers crossed)

I done all of that and it's still stuck on splash screen I'm scared my phone is messed up for good.
Could I try flashing another ROM and if so how would I do that?

Isn't Alltel CDMA?
If you have a CDMA Desire you need CDMA Roms. I hope you did a backup before flashing this ROM. Try doing a nandroid restore to the ROM that came with your phone. If you want a ROM go look into cyanogen
Unfortunately there are not to many CDMA Roms. I would be happy to hook you up with a gingerbread ROM if you want!

No I didn't do a backup. So now I'm screwed? FML

Well thats not good.
You can get your phone functioning by flashing a CDMA ROM. But without a backup you can never get the phone back to the way it was given to you. So you cant ever take it back to alltel.
Here flash the first link on this page
http://mirror.teamdouche.net/?device=bravoc
"cm_bravoc_full-33.zip" that should get the phone working but you cant take it back to alltel
Make sure you clear data/cache all the jazz you did up there

But it will still be able to do everything right? Like download apps, text and all that? I just completely voided my warranty with no reverse? Is that what you are saying?
And also, how do I flash this "cm_bravoc_full-33.zip"? Do i delete the ginger villian ROM?

Ok thank you soooo much!! My phone is working now, but I'm still unsure about activating it again and using it. Will I be able too? And I'm looking and I don't see a market so I'm assuming I can't download apps? :/ that sucks but at least its working some sort of a way! I appreciate your help!

For CM you need to flash the google apps pack, it should be easy enough to find

Thanks, I'll be searching lol. Do you know if I it will be ok to activate this phone?

What do you mean by activate?

I activated my other phone because my HTC desire wasnt working. Do you think I can activate my desire back up? Also..the launcher Icon just dissapeared?? I swear I didn't delete it lol. Any way to get that back?

Ok, I found the google apps. Do I wipe all data/cache/dalvic first before i flash them?

No, you do not clear anything when flashing google apps. sorry for not replying (didn't see page 2)
Your phone will fully function as normal, for me MMS doesn't work but i have a small regional carrier with no support. You should be fine
As for activation, you are no longer on Alltel's software. Since you didn't do a backup I don't know what to tell you. If they can activate it without seeing it that would be best. My best advice is do more research next time.
You kind of got lucky on one front though. Out of all the carriers that the desire is on, Alltel is the one with a leaked RUU (completely restore your phone with those). If you want to go back to how you got the phone you can look into that. (if you want to do that don't talk to me i don't know much about that, make a new thread)

Well thanks! I got the apps installed and the phone on and working, but I can't activate it. So that sucks. So your saying I could go back to being on Alltel's network if I use the RUU? Becasue I will definitely do that ha. I just want to be able to use my Desire. I miss it ha!

If i were in your position, i would RUU. That doesn't mean you can't activate your phone now.
(To do that on my carrier its *228 don't know about you, give that a shot)
If the above doesn't work call Alltel and tell them to activate it. But once again if i were you i would:
1. Do the RUU back to alltel's software
2. Root and download ROM Manger
3. Do a nandroid backup of alltel's ROM
4. Then get to the fun stuff like custom roms
Thats just me. Let me ask you a question, can you activate phones without going into the store with alltel as your carrier?

Related

Too many things messed up :( I want to start all over

Okay guys my Tilt 90 degrees detection is super slow
my 4g won't work (tries to scan forever) (I'm using CM but on 4gworking roms it doesn't work)
My GPS takes forever to lock on (known issue with new CM nightly)
My phone will not USB charge / transfer (I can use dropbox for file transfers I guess -_-) [never learned adb]
I want to reset to brand new and get my GPS and 4G working and forget CM and get a nice ROM maybe VaelROM or Fresh or Something.
Anybody help me out please? I have EVO with CM6 and Clockwork recovery
Do you have ROM manager?
wouldnt loading a shipped rom reset everything?
and isnt there a wipe for tilt?
When I could not connect to my computer I used one off the PCIMG files from the rooting process to reset everything back to stock.
Takes alittle bit off time
Yes I have the purchased ROM manager.
I don't get it - why not just flash a new rom that doesn't have those issues? Why go back to stock?
Because it doesn't fix it, or atleast 4G doesn't get fixed.
I'll try flashing a new ROM tommarow. In the mean-time i'll flash stock rom just incase it does fix it might as well. Then I'll flash Fresh Vael or something good.
amirborna said:
Because it doesn't fix it, or atleast 4G doesn't get fixed.
I'll try flashing a new ROM tommarow. In the mean-time i'll flash stock rom just incase it does fix it might as well. Then I'll flash Fresh Vael or something good.
Click to expand...
Click to collapse
Well, if its any help, people have been getting good 4g results with bs.
Sent from my blah blah blah blah
Tips
Have you flashed the latest Wimax radios?
Have you used your purchase Rom Manager to flash Amon Recovery... because that will give you all kinds of options to reset your phone and wipe everything (including the tilt sensor or whatever its called).
If all else fails and if you have insurance, go wake-boarding and take video with your EVO while jumping the wake and maybe by accident your phone will fall into the water.
Just some thoughts.
i would like to do this too. My adb is acting up, i can't remount saying its not found and /or do not have permission. I want to go back to my stock froyo unrooted and go though the long rooting process by downgrading and using unrevoked 3 with unrevoked forever method.I found methods of doing so, but they are for hboot 0/76 and i have hboot 0.93.0000, so that's no help. Any help with this will be great. I have such a headache trying to find a solid way to do this.

Permanent 1x, no 3g service

I was running Myn's, decided to flash Calkulin's. Downloaded all the latest radios, the format all, and the rom image. Once i flashed the latest radio onto Calkilin's i started noticing that I only have 1x, not 3g, service everywhere i go. I drove the local sprint store (about 5 minutes away) to test to see if I just had a bad signal, rebooted the phone and still had 1x service.
I restored the data profile by doing ##3282# going into the profile and restoring all the settings. Problem is this fixes the 3g service, but I lose the ability to receive phone calls.
I have also tried updating/downgrading trying different roms. Problem seems to follow. Couple of friends are having this issue, all of us are trying different things and not coming to any conclusion.
Any help is appreciated
could some mod please take down the link to calkulin's 1.8? 1.7.7 is such a good rom, but 1.8 is just causing problems left and right.
this same thing happened to me and a bunch of other people. it's calkulin's extended menus.
wipe and reflash his rom. then dload msl reader from market. get your msl. then go to dialer and type ##data#. choose edit, and enter ur msl. choose mode of operation, and make sure its on automatic. then, without going into settings at all, boot into recovery, wipe, adn flash another rom. check if its working now. if not, repeat. it'll work eventually.
dkdude36 said:
could some mod please take down the link to calkulin's 1.8? 1.7.7 is such a good rom, but 1.8 is just causing problems left and right.
this same thing happened to me and a bunch of other people. it's calkulin's extended menus.
wipe and reflash his rom. then dload msl reader from market. get your msl. then go to dialer and type ##data#. choose edit, and enter ur msl. choose mode of operation, and make sure its on automatic. then, without going into settings at all, boot into recovery, wipe, adn flash another rom. check if its working now. if not, repeat. it'll work eventually.
Click to expand...
Click to collapse
Tried this several times (try #20 no lie.) Flashed the stock backup i had when i originally got the phone and it still continually doesn't work.
Autris said:
Tried this several times (try #20 no lie.) Flashed the stock backup i had when i originally got the phone and it still continually doesn't work.
Click to expand...
Click to collapse
totally wipe and flash a stock rooted rom, then do the data/hard reset. if all else fails run the RUU, then root again and go from there. ive had this happen before and it can be a pain in the rear to fix. you may just want to start over fresh.
fixxxer2008 said:
totally wipe and flash a stock rooted rom, then do the data/hard reset. if all else fails run the RUU, then root again and go from there. ive had this happen before and it can be a pain in the rear to fix. you may just want to start over fresh.
Click to expand...
Click to collapse
ruu didn't help me. seems like a very random bug. you sure you changed mode of operation to automatic? ok then try this. after changing mode of operation to auto, go into settings and in mobile data options, change the setting that says evdo-only (forget the name) to hybrid. then wipe and flash diff rom.
fixxxer2008 said:
totally wipe and flash a stock rooted rom, then do the data/hard reset. if all else fails run the RUU, then root again and go from there. ive had this happen before and it can be a pain in the rear to fix. you may just want to start over fresh.
Click to expand...
Click to collapse
By chance, (I can't find it on the sprint store or on the htc website) could you post the download link for the Sprint RUU?
delete.....

[Q] General rooting and ROM questions

Hi guys, I've had a Bell-branded Desire Z (on AT&T's network) for some time now, but I've never gotten around to rooting / flashing a different ROM on it. Since I have some free time this weekend, I figure I'll finally tackle it. Have a few general questions though:
1) Is the method listed in the guide: http://forum.xda-developers.com/showthread.php?t=928160 still the best method for rooting a desire Z? I've heard bad things about visionary, but every rooting method I've read seem to involve it in some way.
2) with S-OFF, am I free to flash any Desire Z / G2 ROM? or will only certain ROMs work with a Bell Desire Z? Any specific recommendation on ROMs? I'm planning on trying out CM7, then going from there
3) What is the best method for backing up my current image + a few other things (mostly contacts and SMS)? Titaniumbackup gets thrown around a lot, but I only have a handful of apps, and really would rather just redownload them then go through the trouble of backing them up
Thanks
http://wiki.cyanogenmod.com/index.php?title=TMobile_G2:_Rooting
that is going to be your safest way to root your vision. eventhough this is longer, there is a lot less chance of bricking your phone. the one you listed is very simple to do, but runs a high risk of turning your phone into a paper weight.
when you do have your phone completely s off, you now have every right to flash kernels, roms, and other things. you can find all of the things i just listed over in the development forum on the g2/desire z. download rom manager from the market. that allows you to back up your current rom, flash the latest recovery and so on. it just allows you to not have to manually install everything. it has the popular g2 roms under the "download rom section".
in terms of backing up everything, there are a few different options. every contact to save is linked to your gmail account, so whatever rom you flash and load youll always have those contacts coming with you. thats the beauty of google and gmail on a android device! but with rom manager, you can back up your current rom and image with that app and save it to your sd card. BEFORE YOU FLASH ANY ROM, OR BEGIN TO START TRYING OUT ROMS, BACK UP YOUR STOCK ROM. whenever i got my g2 when it first came out, i made a nandroid backup of my stock rom and i still have it. when i originally backed it up, i just named it "stock" and havent messed with it since. i just know that i have the stock image(it helps me sleep at night). jk, heh. for your text messages and stuff, download sms backup from the market and you can back everything up through that. all of the apps that you download, including the paid ones of course, travel with you between roms, etc.
i hope i helped ya out, and i wish you luck. if you have any other questions, just shoot me a private message!
Thanks for that;
I actually went ahead and used that method in the guide since upon further research, it seems that visonary was only causing issues when it was use for perm root; temp root, which is what that method uses visionary for seems to work fine.
So did that, reboot into the bootloader, confirmed that I had S-OFF on the first line.
Installed ROM manager from the market
Flashed Clockwork recovery
Booted into recovery and did a system backup to SD card
Rebooted and decided to download the Virtuous ROM from ROM manager
Told it to reboot into recovery and flash that image, wiping all data and settings
Got stuck on an bootup loop (HTC logo + start up sound -> black screen -> HTC logo + startup sound ad infinitum)
Rebooted into recovery, and did a restore from the backup (whew)
Phone seems to be working fine now
Now I'm trying to figure out what went wrong... any ideas?
K, I redownloaded virtuous from XDA, checked the MD5, and tried to flash it again.
Same problem, infinite loop on startup screen.
Do i need to flash the engineering hboot? I was under the impression that that wasn't necessary for using custom ROMs.
Still can't figure out what's wrong.
did you debrand? http://forum.xda-developers.com/showthread.php?t=835777
Have you tried flashing through CWM directly? I really don't like ROM Manager for flashing new ROMs and seems to oversimplify the process to allow green users to get on the flashing wagon.
I would boot into CWM (camera + power i think) and do a complete wipe + flash from in there. I have never had an issue with doing things directly from recovery and I have a Bell DZ as well. It's long since lost it's blue and white colours, but that was it's origin
Have fun!
Im new to this stuff here, and i DO want to learn about it as this stuff is very interesting to me! Technology is something i learn very quickly if im directed in the correct direction
The question i have here is about my Desire Z ( Bell Cannada ).
A few months ago we received a OTA update. So its currently running on Android 2.2.1 : Build - 1.84.666.2 CL322105, and its SUPER slow! Is it still possible to root this version?
I want to install the Gingerbread version on my phone, but i cant find instructions to root this OS version to be able to do so.
Or should i wait till the Official gingerbread Os to come out for our phones?
Ive been searching every where's for this info and everything i find is all back dated to last yr and nothing up-to-date after the OTA.
I hope this question is not TOO n00bish as i tried to search every where for it, and ether i could not find it or i did not enter the correct word search to get a result i needed.
Thanks in advance!
Andrew
Edit: NVM my question here.... i have finally found an update post within the wiki ( April 1 2011 )
Sorry for a useless post!
Thank you all for your efforts in posting in this forum! Very informative!
Athrun88 said:
Have you tried flashing through CWM directly? I really don't like ROM Manager for flashing new ROMs and seems to oversimplify the process to allow green users to get on the flashing wagon.
I would boot into CWM (camera + power i think) and do a complete wipe + flash from in there. I have never had an issue with doing things directly from recovery and I have a Bell DZ as well. It's long since lost it's blue and white colours, but that was it's origin
Have fun!
Click to expand...
Click to collapse
heh. that actually worked. Flashed directly from CWM recovery and it booted up with no issues.
Guess I know not to flash from ROM manager anymore
Thanks.
deaththeorist said:
did you debrand? http://forum.xda-developers.com/showthread.php?t=835777
Click to expand...
Click to collapse
You do not need to debrand to flash custom ROMs to the Bell Canada Desire Z.
makken85 said:
heh. that actually worked. Flashed directly from CWM recovery and it booted up with no issues.
Guess I know not to flash from ROM manager anymore
Thanks.
Click to expand...
Click to collapse
Interesting, I've flashed many ROMs from ROM Manager on my Bell Canada DZ, and never had an issue. That said, flashing from recovery is really not any harder, so if it works, it works.
redpoint73 said:
Interesting, I've flashed many ROMs from ROM Manager on my Bell Canada DZ, and never had an issue. That said, flashing from recovery is really not any harder, so if it works, it works.
Click to expand...
Click to collapse
Yeah, I assumed that flashing from ROM manager just meant that it rebooted to recovery and flashed it from there. I guess there is a difference.
Either way, been playing with Virtuous 1.0.2 for a few days now, really like this ROM, but I'm itching to try out something different now. Man, I can see this is going to develop into a time consuming hobby.
Plus, I'm going to need a bigger SD card to store all of these ROMs + backup =X
Oh, another noob question; I've come across a few zip files that included a system folder and an META-INF folder. How exactly do I install these?
G2 only works with at&t
alright here it is my t-mobile G2 won't connect to the t-mobile network at all, I've went through 3 SIM cards because this thing use to kill the SIM card from working on other t-mobile phones and it works perfectly fine on at&t network. so I've unlocked so it will work on at&t just to see if it would work. so i gave p and bought a MT 4G, but i still want to know if the G2 is fixable because I'm just about ready to throw in the towel this is what I've tried to resolve the problem called t-mobile they ended up saying just return the phone but i can't since i didn't buy it from them. Called them again got the unlock code. I've flashed the radio a few times. I've also just got the leaked 2.3.3 update and nothing has worked. It find t-mobile network but says your SIM card isn't allowed to connect to this network then after trying again it says unable to connect to network please try again later.
Just so frustrating i don't know what to do just about to say forget it. this thread is my last resort.
also i still have S-OFF
i used this method on my G2 just yesterday and put on CM7.0.3. the only issues i came across were because i restored everything (should have just done apps and app data) using Titanium, which put me in a boot loop. I'm dumb, so i did it twice before i figured out what was the problem. the thread has a comment about how Visionary is dangerous, but the OP responded that since it is only used to gain temp root, there should be no problems.

[Q] wipe data/factory reset ? Complete Noob Here.

I have looked around and am still not sure which way would be best to un-root my Evo 4g. Can I just use ( wipe data/factory reset ) then update my contacts thru asurion ? and reload the apps i want from the market ? right now i am in ClockworkMod Recovery v3.0.05 ( it was originally rooted with unrevoked ) not unrevoked forever. I thought i would like to try the latest official build for a while. ( not looking forward to the sprint bloatware ) or would the easiest thing be to try and update to the latest ClockworkMod or some other build. Thanks for any info you might have.
Best way to unroot is to grab the unrevoked s-on tool. Flash that and run a ruu or grab a stock non rooted rom.
Sent from my PC36100 using xda premium
so i guess wipe data is really no good ?
Can I just use ( wipe data/factory reset ) then update my contacts thru asurion ?
Click to expand...
Click to collapse
Not really sure what you are asking here. A factory reset will NOT unroot you, it will just reset whatever rom you are on. And updating contacts through Asurion? Asurion is your insurance provider, they have nothing to do with contacts....
I thought i would like to try the latest official build for a while.
Click to expand...
Click to collapse
You don't have to unroot to do this, just flash a rooted stock rom. This way you stay rooted. If you unroot, and then update to the latest stock rom, it will be VERY difficult to re-root.
or would the easiest thing be to try and update to the latest ClockworkMod or some other build.
Click to expand...
Click to collapse
I think you need to read a LOT more about rooting before you proceed to do any more, you don't really seem to know what's going on. ClockworkMod is your recovery, which has nothing to do with your rom. Updating Clockwork will not update your rom, or unroot you.
LOL I guess you are right. A LOT more reading in my future.. Thanks though.
I guess I will go ahead with the idea to update to the newest rom. I thought because ClockworkMod gave me the option to " wipe data/factory reset. " it would set it to factory default, which I thought might be un-rooted.
Side note: Asurion also syncs my phone contacts. I had to use it once when my phone was lost. to update / sync the new phone. It worked very well. Google sync stopped working long ago. I get an error message every time.
But thanks again. that post was very helpful to point me in the right direction. and make me feel a little foolish LOL BE WELL
DGXYZ said:
Google sync stopped working long ago. I get an error message every time.
Click to expand...
Click to collapse
did you try setting up a new gmail account? or maybe jsut delete it on your phone and re-set it up.
not yet. but i will soon. ill let you know how it goes. I've read that it works for some and not for others. haven't found a lot of info directly from Google though. it seems they don't acknowledge the issue. but I am sure i'm not the only one experiencing the error message.
If you really like the new sprint os but hate the bloatware, why not use a rooted sprint rom that one of the devs has made, kind of exactly what sprint/htc gives you but minus the bloat!
Thanks I will. i'm very new to this, how do i go about getting the correct one ? as you can see from above. I have Alot more reading to do.
just did a search on the rom you are running. How do you like that one.
The Rom I am running is great! Just can't post the link to it in this forum due to forum rules. But the Rom I am running is similar to a stock rom, just not a stock rom of an evo 4g. It's ics os which stands for (ice cream sandwich) the new HTC os. Its the stock upgrade for most of their new phones such as the Samsung Galaxy SII. Evo 4g was left out, but due to the devs on this site and others the evo 4g will be just fine!
Edit: Well there is alot of reading and research involved. But for me the best kind of research is trial and error. I read up on certain roms that interest me that have key perks. Such as ICS (newer roms), or wimax enabled (4g enabled and typically on the older roms). Then I read up on peoples response to the roms, what issues they have had, how they have fixed them, how the developer has fixed them. And then after that I'll flash the roms and see how they run. Usually a day or two of use can tell you if you like it or not. Its like a car test drive!
That's Great. I will look around a little more. and get a new rom, I'll probably try the one you mentioned, ( found the link ) Hey, I really appreciate the info, I just need the time to screw around a little more. LOL. Be Well. I'll let ya know how it goes. It is pretty interesting.
Yes on the site you are currently on, there should be a few helpful tips on how to flash the roms and kernels properly. Good luck, also a bunch of great tips on the CM7 Wiki

[Q] Wifi not turning on! Please Help.

Hello, Im new to all of this so please understand. Okay, I have a Sprint GS3, I rooted it using the toolbox thing it worked but I decided that I didnt want the root anymore. I loaded stock software and booted it up normal. The only problem now is my wifi isnt turning on. Ive searched page after page on google, ask and bing. I dont know what to do anymore. Im just about to just say screw it and give up. Any help will be much appreciated.
You Odin'd back to Stock, and now your WiFi is not working correctly ? Are you certain your connecting to your Router ? Did you check the Router to make sure it's working correctly ? Did you try to connect to the Router with another Device ?
If you still have a custom recovery installed, I'd say to just flash another rom. The toolbox kills your WiFi fir sine reason, which can only be fixed by flashing another kernel, and roms have the kernels built in so, you might as well kill two birds with one stone
You could just flash stock rooted though, no need to go full out custom
Wifi not turning on
What I mean is my phone's wifi wont turn on at all. How do I get everything back to normal like before I rooted it?
Brblank44 said:
What I mean is my phone's wifi wont turn on at all. How do I get everything back to normal like before I rooted it?
Click to expand...
Click to collapse
Ok, this method should work and do exactly what you wanted, but you'll still have root access.
Below, I have quoted a post I made a while back when trying to help someone out.
Down below I link to Freeza's stock Rom, which is what you want if you want the stock phone with root. The one you want to download is the DeOdex MD4 one:
DeOdex:
Sprint Touchwiz Jelly Bean 4.1.2 L710VPBMD4 | Mirror
MD5: 77262D9D6CF1A6AF30A8981A95A75D57
Click to expand...
Click to collapse
In step #4, the wipe system is very important. It's most likely that something in your /system folder is messing up your wifi. Just flashing a new Rom over might not fix it. I'd also wipe /data, 'cause a fresh wipe is much less likely to have issues.
Ok, let's start at the very beginning (it's a very good place to start).
Before we get started, I'm going to make the following assumptions:
You successfully rooted your phone through Odin.
You currently have a custom recovery (either TWRP or CWM).
You have a Rom you'd like to flash on either your internal storage or your SDcard (I'd recommend the SDcard, but that's your prerogative).
If either of the first two is not true, I'd recommend going back to the rooting guide and check out the videos on how to use Odin to gain root and a custom recovery.
If number 3 above is not true, download a ROM (nor someone new to flashing/custom Roms, I'd recommend Freeza's stock rooted Rom, as it's identical to stock TW, but just with Root). Once you download a Rom, check it's md5sum to verify that it's a good download. Copy the file to your SD card and get ready to flash (make sure you have decent battery life left, I try to keep at least 50% or more when flashing Roms, although it shouldn't take too long.
I'll give directions on how to flash a Rom below. The instructions will be for TWRP, but CWM has similar options/settings
Turn your phone completely off (hold down power for 3-5 seconds)
Boot your phone into recovery. Hold Up, Menu, and Power for a few seconds (until SAMSUNG appears on your screen and the phone vibrates)
Make a Nandroid backup. I can't emphasize this enough. In flashing, it's almost a certainty that one time, something will mess up. When that happens, you want to be able to restore a backup. In TWRP, just go into Backup Menu and choose where you want it (internal vs. External storage). It takes my phone a few (5-10) minutes to completely backup my data.
In TWRP, click the wipe button, then system. This will completely wipe the Rom from your phone. Doing this will allow you to get a "clean" install, without any settings or leftover files from your old Rom getting in the way. Instead, you could only wipe data (factory reset), which is good enough for most Roms. I'd still recommend a system wipe, though.
Also while in the Wipe menu, wipe Cache and Dalvik Cache.
Go back to the TWRP main menu.
Click Install, then find your Rom zip file (may have to switch from internal to external storage).
Let TWRP do it's thing.
If you're installing a TW-based Rom, chances are it had gapps already installed. If not, you should now flash the correct gapps package from goo.im. Make sure you're flashing the correct one, as if you don't, your google apps will force close upon use.
Reboot into system and give it time to boot (first boot sometimes takes a couple of minutes).
Set up your phone the way you like.
These should be the directions to follow whenever you flash a new Rom. Some Roms have the Aroma installer, so you'll have more options once you choose to flash the Rom zip, but those are typically easy to follow (and vary from Rom to Rom, so I won't be able to give you a good guide on that).
Hope this helps!
Click to expand...
Click to collapse
Brblank44 said:
What I mean is my phone's wifi wont turn on at all. How do I get everything back to normal like before I rooted it?
Click to expand...
Click to collapse
Yes. The toolbox kills your WiFi completely and you have to flash another rom to fix it. Flash stock rooted from freezas thread and you should be good to go.
CNexus said:
If you still have a custom recovery installed, I'd say to just flash another rom. The toolbox kills your WiFi fir sine reason, which can only be fixed by flashing another kernel, and roms have the kernels built in so, you might as well kill two birds with one stone
You could just flash stock rooted though, no need to go full out custom
Click to expand...
Click to collapse
Why do people use a toolbox on a phone that's so easy to root without it?
flastnoles11 said:
Why do people use a toolbox on a phone that's so easy to root without it?
Click to expand...
Click to collapse
When I first rooted my phone (back pre LJ7 days), I used it because I came from the EVO 4G, which was notoriously difficult to root (and which needed a toolkit). So when I came to the GS3, I figured it'd be the same way. Fortunately, the toolkit worked better back then and I didn't have an issue. Now that I've helped others use Odin (and have used it myself a number of times), I don't point to the toolkit anymore.
But my point is, sometimes people assume it's difficult, see a toolkit that is meant to make it easier and decide that's the way to go.
topherk said:
Ok, this method should work and do exactly what you wanted, but you'll still have root access.
Below, I have quoted a post I made a while back when trying to help someone out.
Down below I link to Freeza's stock Rom, which is what you want if you want the stock phone with root. The one you want to download is the DeOdex MD4 one:
In step #4, the wipe system is very important. It's most likely that something in your /system folder is messing up your wifi. Just flashing a new Rom over might not fix it. I'd also wipe /data, 'cause a fresh wipe is much less likely to have issues.
Click to expand...
Click to collapse
Thank you very much. I will try this as soon as I can.
topherk said:
When I first rooted my phone (back pre LJ7 days), I used it because I came from the EVO 4G, which was notoriously difficult to root (and which needed a toolkit). So when I came to the GS3, I figured it'd be the same way. Fortunately, the toolkit worked better back then and I didn't have an issue. Now that I've helped others use Odin (and have used it myself a number of times), I don't point to the toolkit anymore.
But my point is, sometimes people assume it's difficult, see a toolkit that is meant to make it easier and decide that's the way to go.
Click to expand...
Click to collapse
I get that, but just a tiny bit of reading around well show you the toolkit is actually the harder way to root this phone in my opinion... Just saying
flastnoles11 said:
I get that, but just a tiny bit of reading around well show you the toolkit is actually the harder way to root this phone in my opinion... Just saying
Click to expand...
Click to collapse
I totally agree that the toolkit is much more complicated and a bit of a "black box." Hence why I don't recommend it anymore.
But back then, even though I read a whole lot, I decided to go with the toolkit because it felt safer. Heck, I eevn donated so I could get the "pro" features! And for people who aren't that comfortable "hacking" things, it's tempting to use something that'll do the "hard work" for you, even if the normal way of doing it is relatively simple.
That's why I always try to spell things out very clearly for people (I do like numbered lists, don't I?). If someone responds to a thread with "just wipe data and flash a new rom," most "noobs" will hesitate because while they may know those terms, they don't know the procedure and will be afraid of messing it up. With the numbered list of instructions, they typically feel much more comfortable with doing it themselves.
Just my two cents.
Yeah, very true (@topherk). The first time I rooted my firdt phone, I saw all the guides and stuff, but settled on a toolkit sort of program to do it for me...subsequent phones I've always rooted by hand. For me it kinda sucks that there's no way to root the S3 manually (as in like, push this to.the phone, reboot, run this command then flash recovery)
Having come from 2 HTC devices (evo and evo shift), I kinda feel like ODIN is a "cheating" way to root lol. But that's just me.
Whats a md5? It says no md5 file and gives me an error.
Brblank44 said:
Whats a md5? It says no md5 file and gives me an error.
Click to expand...
Click to collapse
Thats normal,.the great majority of flashable zips do not include an md5 file.
What that is referring to is a hashing function, called the md5sum, that can be used to verify the integrity of a file. Most devs will provide this (in number format) so that you can check the md5sum of your local copy/download against what they provide. If anything goes wrong in a download or file transfer, the md5sum of your copy will not match the expected value, confirming that it was a bad download or that something went wrong along the way.
For your case, TWRP always checks to see if the flashable zip includes an md5sum check file that it can check your file against as an added precaution that you're not flashing something corrupted.
Brblank44 said:
Whats a md5? It says no md5 file and gives me an error.
Click to expand...
Click to collapse
Don't do the md5 verification in the Recovery. That typically fails, even if the md5 is correct.
I typically do it in Windows (I use this program, works great). If it's a really large file or I don't feel confident about the cable I'm using, I'll also check the md5sum in ES Explorer on the phone after I transfer it.
Okay I flashed it and I have the same problem. Wifi not turning on. The detox whatever its called didn't work. So I took it to sprint today after having flashed it and everything and they did a hard reset. I lost everything. Sprint couldn't swap the phone out for a new one. I am thinking about sending it back to samsung. So they can fix it. Any other ideas guys? Also thank you for your understanding and helping me.
Brblank44 said:
Okay I flashed it and I have the same problem. Wifi not turning on. The detox whatever its called didn't work. So I took it to sprint today after having flashed it and everything and they did a hard reset. I lost everything. Sprint couldn't swap the phone out for a new one. I am thinking about sending it back to samsung. So they can fix it. Any other ideas guys? Also thank you for your understanding and helping me.
Click to expand...
Click to collapse
Brblank,
Try this easy method to return to stock everything including recovery, flash count reset and device status normal. It worked perfectly for me.
Before flashing wipe Cache and Dalvik and factory reset.Then flash the file. Make sure you choose the correct file (16gb or 32gb version).
Even if it doesn't fix your WiFi issue it will put your phone in the proper state to send to Samsung.
You can place the file on your internal or external card.
Return to Stock Link
With much thanks to billard412
Hope this helps you.

Categories

Resources