Desire stuck in boot loop - Desire Q&A, Help & Troubleshooting

Hello, tonight i tried some thing (i just wanted to change rom), but i made some mistakes... now i cannot boot my phone, it keeps rebooting. I have Leedroid ROM and it keeps rebooting after PC-boot like animation. The only thing i can access is the back button + power recovery. What can i do?
Thanks!

I have tried to wipe the cache and system, and solo deleted storage (hard reset)... but same point. I think that if i can put a update.zip on the sdcard i can flash it... but at the moment i don't have a sd card reader. Is the phone dead?

No your phone isnt dead
1. If you have a nandroid on your sd card just enter hboot and recover your system.
2. Otherwise you can perform an md5 check of the rom you downloaded and wish to flash. (just to make sure its not corrupted, i suppose your trying to flash leedroid) Enter hboot wipe everything >system wipe>cache>dalvic and then relash the rom. Oh and make sure your sd card is partitioned correctly ... a2sd, D2EXt ...
3. If problem persists go into hboot mount your phone as storage copy another rom you would like to try and then flash this, you can just follow the steps in no2 abouve again.
This should solve your problem!

The thing that i have done BAD is the format of the card... or better, i have done right things but i'm almost sure something was wrong. I formatted it from gparted, then created a 3GB FAT32 partition, and with the remaining space i created a ext4 partition. Then, i moved the files needed for the rom that i wanted to flash (MIUI) in the fat32 partition, as i seen that the ext4 part was mounted read only (dunno why).
IMPORTANT: I have done all this mounting the SD card via Clockwork recovery.
When i selected the voice "flash a zip selecting from memory card" (or something )... it said "cannot find a valid zip".
Then the only choice for me was to reboot and... that is
Now i cannot mount SD, as i don't have (at home) a SD card reader and i don't have access to CWM recovery.

Related

[Q] SDCard Mounting problem

I have the following problem:
-some days ago I root at the phone and followed a tutorial and I wanted to put GingerVillian 1.4 rom.
-I encountered during flashing sdcard problem in the sense that it did not want to partition, after countless attempts on win then on linux failed. It ends almost immediately with full option and run ext2 to ext3 getting error 'ext3 fs' via adb!
Finally (I did not explain why) PartitionSD worked in recovery mode. I realized that I have to go for it took a few seconds (before it ends almost instantly (I say only one point for the work phase)) Then I upgrade ext2 to ext 3.
I installed the custom ROM.
Everything was ok / functional. I moved and dalvin-cache to sd: a2db cachesd.
My problem is yet to come, do not know why I got the impression (or so I understand) that the nand backup will contain information that I needed on the phone (numbers phone, msgs, etc.) and I could choose what I want to restore only. So I reboot in recovery mode and I did the restore.
Unfortunately this has restored my htc phone-sense and goes into a reboot loop as long the card is inserted. I removed the card and I could enter the system.
Unfortunately does not recognize any card (I tested with the default sdcard that came with, it boot even though he just does not mount)
I also entered the recovery mode: and tried to format (same error as at beginnin no chance error "run via adb") and I tried to mount from the recovery options:
Error Can not mount / dev/block/mmcblk0p1
I note that the root has been preserved a2db I no longer recognized in the terminal emulator (somewhere logical since now is htc sense again)
Can anyone help me?
OK. I suggest you should start from scratch. Just take your sd card out your phone.
First fix your sd card:
-Boot a Gparted live cd.
-Format your SD card to one big fat32 partition.
Then do this:
-Download a rom without A2SD or anything like that. For example: Oxygen 2.0.1 (in fact it has kind of A2SD support, but if you don't have an EXT partition it doesn't matter. nothing can go wrong on that)
-Put that rom on your SD card and boot in recovery. (Vol down + power button, you'll enter fastboot. wait 10 seconds. select in the fastboot menu: 'recovery'.)
-full wipe. Everything. data, factory reset, dalvik cache. everything,
-install rom.
Post your results.

Lost!!!

OK, been screwing with iPhones for YEARS.. (Franlkly, that ****s a cakewalk compared to screwing with android phones)... Anyway, I've inherited an HTC desire that's been rooted with Clockwork 2.something, and a froyo 2.2 rom. I've since updated the hboot to 0.93.0001 FROM .83 or .84 or something... or im TRYING to get the gingervillian rom to function correctly but im having problems with the whole clockwork 3.0 thing. (I cant figure out how to install clockwork to the phone NOT the SD card.. as Im assuming i need clockwork installed to the phone to handle the whole EXT on the SD thing...
(Basically, when i run in a terminal:
su
a2sd cachesd
it returns a "cant mount sd-ext" error...
(this is my biggest problem so far... after that is... HOW THE HELL do i install clockwork to the phone (or upgrade clockwork to the phone) rather than the SD card (yes, i can run the clockwork 3.0 from the sd by entering recovery and "installing" it (which really only runs it) from the sd card (wether it's named update.zip or recovery.img or blahblahblah.zip)...
As im fairly new to the android thing (and for the record.. the android kicks the **** out of every iphone ive ever touched)... can someone PLEASE... point me in the general direction of right?
really? nothing? no one has had a single issue with going to gingervillain? and cant point me in ANY direction? THIS i find difficult to believe...
from what i understand you want to put the latest clockwork recovery onto your phone ????
if so in rom manager click (i not used it for a long time ) the top one syas something like flash clockwork / current clockwork , boot into recovery search for the zip it created and install
or you can get the img file and push it via fastboot
fastboot erase recovery (enter)
fastboot flash recovery clockwork-recovery.img (enter)
^^ thats the commands to push it once you have directed to where it is .. for eg
cd c:\ enter (then direct it to where recovery.img is preferably in tools folder of sdk )
if thats not what you want then thats just some useless info you have gathered .....lol
It's not that difficult your are just mixing up a few words.
Clockwork is a recovery, this way you can flash new roms etc. I think you are using an old tutorial about rooting etc.
1. Download unrevoked to root your device. You can select to install a different recovery in Unrevoked.
2. I would suggest using a different recovery, look for amon-ra in the rom development thread.
3. This error "cant mount sd-ext" means that you don't have an ext3 partition on your SD card. There are a lot of tutorials how to do this, but I think the easiest way is true the amon-ra recovery. (I believe that clockwork also has this option) You have an option to partion your SD card. Make that ext3 partition 512mb or 1gb in size. Set swap for 0. The rest fat32.
4. After you have done this you can type the commands again in the terminal and it will work.
You can skip part 1 and 2 if you want but I suggest that you follow them.
ps the Hboot does not matter anymore which version you have.
OK, so I've gotten a little further. Ive successfully installed Clockwork Mod 3.0.0.5 onto the phone itself (installed via terminal as:
su
flash_ image recovery /sdcard/Clockwork.img
Then did a factory reset of the phone, booted into recovery, formated the sd card with a 1G ext partition, and 128MB swap... the rest as FAT. Then mounted as USB, transfered the Gingervillian 1.5 image to the sd card and installed Gingervillian. Booted into Gingervillian, installed terminal and tried to move the Dalvik cache. TO NO AVAIL...
I still get an error saying that the davlik cache cant be moved.
Additionally, from Clockwork, after formating the SD card, i try to mount sd-ext and it says it cant...
any advice?
OK, apparently it's the SD card I was using (i was attempting to use a 32GB SD card... I swapped back to my 8GB sd card and it seems to work flawlessly.
Any ideas on what would stop the 32gb sd card from taking an ext partition?
(interestingly, google maps crashes when i attempt to a2sd cachesd on the 8gb sd card...)
I didn't need to have an ext 3 partition on my card to use Oxygen and also I didn't update my HBoot from the default.
Using clockwork recovery 2.5.0.7
Just use Rom Manager to install and reboot into clockwork recovery and then from there you should be able to clear the cache and install oxygen with no problems with only a fat32 partition.

[Q] SD Card Problems With Clockwork Recovery [Q]

SD Card Problems With Clockwork Recovery​
Hi there XDA, basically everytime I have an SD-EXT partition on my phone (i always, always make them using Linux manually) if I format my SD-Card (which should only format the Fat32 partition, I run into a big issue. My SD-Card will un-mount, possibly format i don't know, then it won't remount. If I connect my phone to windows the SD-Card has all its partitions removed. Very strange?
Anyway I decided to switch to Oxygen 2.0.1 this morning, as it's a much more stable rom, and anyway I performed what I said above on Froyo 2.1 (DeFrost) and the SD-Card wouldn't mount, when I noticed that the SD-Card didn't have any partitions I formatted it using Windows. I then placed the update.zip file of Oxygen onto the root of my SD-Card.
I proceeded to Clockwork Recovery and selected the option 'Select .Zip from SD Card' and I was shocked to see something saying No Files Found. We I have tried everything to sort this out, and absolutely nothing seems to be working? I have used a Ubuntu Live CD to try and completely wipe and re-format my SD-Card which completed sucessfully, but no joy, i've tried all the options on Clockwork Recovery, nothing works, I used a 2GB SD-Card to install Oxygen and this worked fine, once the phone was booted everything would work including the 8GB Card if I switched them. I know I should just put up with this, but I need to fix this.
Does anyone know how I can get my card to work again thanks.

[Q] Problems with Boot after replacing SDHC

Ok, I've searched everywhere and I cant find an answer so I've come here for help.
I've got a Telstra Branded HTC desire, been rooted and is running Leeroid 2.3 for the last month and its been great. Just bought a new 32gb SDHC to replace my old 8gb. Put it in my phone and detected it without a problem, was able to run "ClockWorkMod" to install a partition for A2SD "512mb ext, 0mb swap". Booted recovery, backed up, wiped the factory/data, Wiped Partition Cache and Wiped Dalvik Cache.
Now here's the problem
After all that is done I reboot from recovery mode, The phone hangs at the First Telstra Logo "The White HTC screen for original Rom". Take the 32gb SDHC out and put the old 8gb and it boots normally, take the 8gb out and have no memory and it boots normally.
Anyone know what the problem is? I've been re-installing the Rom on both the 8gb and 32gb, Re-Formatted the 32gb, copied all the files from the 8gb to 32gb and ran a full nandroid backup and still have the same problem........
While Restoring a copy of the backup from the 8gb on the 32gb, I got two things that are missing according to the check.
".android_secure.img not found. Skipping restore of /sdcard/.android_secure."
"sd-ext.img not found. Skipping restore of sd-ext/."
Spent the last 5 hours fiddling around with the phone but getting really frustrated, any help or a solution would be great
Thanks
It is definitely your SD Card.
However, a nandroid restore should work.
And from some reason you miss some files from your backup. The EXT.img is vital to make the ROM Run.
It does not even boot if you flash the ROM again after a full wipe?
nagypapi said:
It is definitely your SD Card.
However, a nandroid restore should work.
And from some reason you miss some files from your backup. The EXT.img is vital to make the ROM Run.
It does not even boot if you flash the ROM again after a full wipe?
Click to expand...
Click to collapse
When you mean full wipe, thats re-installing the rom from the 32gb SDHC or do I have to format something in Recovery Mode?
I donno why it cant find the EXT.img when I do the backup, if all fails I might as well throw out the SD card since its purpose was just for the phone......=_=
Yeah, a copied backup from the 8gb on the 32gb does the same thing, just hangs on the white splash logo thingy
Why not just wipe everything and start from scratch? Bit of a pain but if it works, it works.
Meaple said:
Why not just wipe everything and start from scratch? Bit of a pain but if it works, it works.
Click to expand...
Click to collapse
I am willing to do that, the thing is whenever I put the 32gb card in my phone, it just hangs on the first set of logo's.
I've copied the Leeroid to the root of the 32gb, wiped the Factory/Data, Partition Cache and so on.
Go into install from zip and select Leeroid 3.2d.zip and run that. It finishes installing and asks me to reboot. I reboot manually and it loads the first set of logos and hangs.......
I've put the memstick in the phone and it worked before I partitioned it for A2SD. After that, its just been chaos, Im using the 8gb stick again so I can make calls an all but 32gb would be great to use =_=
If there's anyway to get this thing up and running on the 32gb. Doesnt matter if I have to start from scratch, as long if it works. That would be great ^_^
SD CARD = your 32 GB card
1. Partiton your SD CARD for A2SD+ (512MB Ext3 minimum)
2. Put SD CARD in the phone, copy Leedroid_a2sd.zip (or whatever it is) to the card.
3. In recovery wipe everything (data(factory reset)/cahce/dalvik cache) - dalvik is found under the advanced menu.
4. Install Leedroid 2.3
5. First boot takes 5-15 mins, so just wait.
nagypapi said:
SD CARD = your 32 GB card
1. Partiton your SD CARD for A2SD+ (512MB Ext3 minimum)
2. Put SD CARD in the phone, copy Leedroid_a2sd.zip (or whatever it is) to the card.
3. In recovery wipe everything (data(factory reset)/cahce/dalvik cache) - dalvik is found under the advanced menu.
4. Install Leedroid 2.3
5. First boot takes 5-15 mins, so just wait.
Click to expand...
Click to collapse
I've got the 32gb SD Card working again, turns out that the partition I created on ClockWorkMod was corrupted. Rejoined the Partition, Wiped everything and installed Leeroid 2.3 and it works fine and the phone picks up the memory.
New Problem
I cannot get ClockWorkMod to create the partition since it automatically reboots the phone every time I attempt it and I get an black screen with an android/! picture.
Im using Gparted to create the A2SD partition but each time I create one I get an error
Unable to detect file system! Possible reasons are:
- The File System is Damaged
- The File System is Unknown to Gparted
- There is no file system available
- The device entry /dev/sdc2 is missing
I'm assuming that the SDHC I bought, for some reason doesn't allow me to create a partition? If that is the case, is there any work around to install apps to the SDHC. The Desire is such an awesome phone but it lacks the internal memory
nagypapi, I know I'm asking too many questions but your help means a lot
What card is it? If it was a cheap one, it can cause problems.
And partition it from the phone using GParted.
Boot into recovery, mount USB storage. And the run Gparted.
Remove both partitions, and create new ones from scratch.
If GParted still gives an error, try to format it on the PC.
nagypapi said:
What card is it? If it was a cheap one, it can cause problems.
And partition it from the phone using GParted.
Boot into recovery, mount USB storage. And the run Gparted.
Remove both partitions, and create new ones from scratch.
If GParted still gives an error, try to format it on the PC.
Click to expand...
Click to collapse
I bought the SDHC from eBay, doesn't have a brand but it works apart from the whole partition thingy.
I got the error when I format the SDHC on the computer with card reader, I'll have a go with the USB Storage on the phone recovery mode. Donno if it will make a difference but I'll give it a shot anyways, I cant do it now since I have work tomorrow but I'll attempt it while I'm working and get back to you
Sounds like a defective card, send it back, if possible. Never use "unbranded" cards.

SD card works in windows but not in Recovery

so here is the deal. did s-off today, had a FAT32+ EXT4 on my sdcard. i tried to install rcmixS (cm7 hboot) but i got a bootloop. so i read it might help to format ext4 to ext3, and there was a flashable .zip that was supposed to do it. flashed the zip and after that my EXT partition no longer works (not even in gparted - like it wasnt there, 1gb of storage just isnt visible) and my FAT32 works only in windows... if i enable usb mass storage in CWM 2.5.1.8 i can copy files to SD but then in recovery it says 'no files found' when i want to flash a rom.
so i took my second SD card, it worked in CWM, so i ran gparted and did FAT32+EXT3 (no .zip's this time) and the same thing happend, but this time i can still see EXT3 in gparted, formatted it back to FAT32 but still windows can see it but not the recovery...
gosh help me please :<
Flash a newer recovery, might stop this issue. Also, recovery is gay and soemtimes files don't appear for me so I just reboot the recovery. If you want a quick fix for the partitions, just boot into your rom you have installed, go to Settings > Storage > Erase SD. It will wipe the lot and just put it all to a single FAT32 partition. You will need to format again but at least if partitions go missing, you can do this and you just partition it again.
since i had no rom when my sd broke i ran a RUU, and formatted SD from android, and it worked ! 1GB that was M.I.A. is now back, big thanks man!
so now i am rooting with unrevoked and cwm 2.5.0.7 which never let me down
so while s-offing again, can i stay with 2.5.0.7 or des it have to be 2.5.1.8 ?

Categories

Resources