Related
I'm having trouble with my EVO staying in 3G coverage. My phone is fully rooted and running Froyo (The problems were the same with the Eclair build however), have the 2.05+ radio installed (however the problems were the same with the 1.39 radio as well) and I'm living in Michigan.
At any given time my phone will slip into 1X coverage and will seem to lock in there. When I first received the phone I felt like the phone quality was subpar compared to the Hero I had prior. I'm not sure if its been a firmware issue or network issue or simply a phone issue (starting to think the later), but hoping its a simple fix with something else.
About a week ago I was on a trip across Michigan which should have had 3g coverage the entire way (I was a passenger and trying to use wireless tethering to do some work along the trip). I would constantly go into 1X and would have to restart my phone to get back in 3G. Even at home I'll go into 1X and will have to reboot my phone to get it back to 3G.
I've tried Real Signal as well during these times and it also shows no 3G signal.
Anyways, anyone else experience this? Is it likely a bad radio or something else. I hate to have to return the phone and go through that process plus root again but I might have to at this point.
Thanks for any help that can be provided!!
Hmmm, whereabouts in MI? I am all over the south east and have never seen my phone drop out of 3G yet.
Have you tried wiping everything and trying stock rom w/OTA 1.47 just to make sure it isn't the ROM?
I am having the exact same problem. Using 2.0xxx radio and Fresh 0.5.3. I recently exchanged my phone and got a new one. The first phone did not do this
Try this:
When it shows you no 3G coverage, instead of restarting, go to-- SETTINGS> WIRELESS & NETWORKS> scroll down and look at "Mobile Network". When i get the 3g problem it says "Connection Failed". I think uncheck that box and re-check it and it connects back to 3g again (for a time, but then I have to do it again).
My MOBILE NETWORK settings are: Data Roaming = OFF, Always-on mobile data = ON, and CDM Roaming mode is set to: SPRINT only. Call guard = ON but i dunno what that means.
I dunno wtf is going on with this. Im in Houston and this issue is really pissing me off because i actually got a Novatek screen this time and don't want to risk taking the phone back and getting the Epson...
Anyone else experiencing this retarded issue?
Elegant: I'm in SE Michigan as well. I've tried several roms and have had issues with them all. I'm currently using a Froyo rom with similar issues as I've had with stock and other eclair roms.
As for checking/unchecking the box as you stated in Froyo I don't have that option available... I'm sure there's another way to get to it but I can't through settings. I think there was a #* code to get to where you are talking about but I'd have to look again.
It is a very annoying issue and like yourself I don't want to have to return my phone if there's a simple fix.
On a side note: How do I find out what panel I have? I've been considering the kernel that would get rid of the 30 fps cap but haven't yet pulled the trigger in part because I don't know which panel I have - and because I need to learn a little more about it before I go ahead with it.
http://forum.xda-developers.com/showthread.php?t=719763
Post 3 tells how to determine screen
Thanks for your help - got the kernel and now get around 40 FPS. Now if I can just figure out why the phone goes in and out of 3g on occasion. Its really not as big a deal when I'm at home but when I travel it is a pain.
well i returned my phone and got one with an Epson screen. im using Fresh 1.0.1 and it is even worse. i cant even use 3g data for more than 5 seconds before it disconnects. i've read some stuff about APN but dont know how to refresh/update them. i've updated PRL and Profile and nothing helps. how am i having this problem with 2 phones running 2 different ROMs? last rom was fresh 0.5.3 and now it is fresh 1.0.1...
anyone help with this APN issue? (i dont even know what APN stands for)
i actually am using the kernel for 55 FPS for Epson screens. would that be a factor either?
I'm and having the same issue with 3g.
Every thing worked fine with the first stock root of 1.32.651.1, PRI 1.40_003, PRL 60666.
With the second root of 1.47.651.1, PRI 1.34.651.1 now my 3g is unstable.
I don't know what FPS has to do with any of this, but I put radio radio-1.39.00.04.26 and it seems to improve a tiny bit, but I don't know how to update back to PRI 1.40_003.
Not happy
Also having problems in SE Michigan. Just started today after installation of Fresh 1.0.1 and the new radios. I also have a co-worker with and unrooted EVO and the latest OTA/Radio with the same problem.
I have a rooted EVO (DC 3.2.3). My wife has a stock EVO (fully updated).
Last night our phones started bouncing between roaming/sprint 3G, while we were sitting at home.
We started getting this error if we turned off Data Roam:
"Data Call Failure
Error Code 67: Registration failure. Your PCS Vision username and/or password may be incorrect. Please try again."
The error pops every time it tries to connect to Sprint's mobile network and fails.
We also live in Michigan. Perhaps they are doing provisioning?
Rebooting + update Profile/PRL seems to help, sometimes, but not permanently.
I am having the same issue with my 3g coverage.
When I go into my settings and turn mobile network on, it connects but then immediately says connection failed.
Does anyone have any suggestions as this is getting really annoying and frustrating.
Went to a Sprint store last night; apparently Michigan was having some significant network issues (the store reps said their phones kept getting disconnected as well), and that it was expected to be resolved by sometime today. After a reboot last night, I haven't had any more issues myself.
Hi, I was hoping someone here may be able to help me out with this problem. Last week I had a weird issue where my GPS signal stopped working, text messages and phone calls weren't coming into the phone. I've since been able to correct that issue with flashing to a clean Sense based ROM, and updating the profile and PRL, but now I can't seem to pickup 3G EVDO signal, only 2G 1xRTT..
My phone is(was) rooted and flashed with Calkulin's EViO 2 v1.77, most current radios. I thought maybe something got messed up, and since 1.8 was out, I flashed to that. Same issue, updated the radio from his package, same thing. Then I thought, ok, maybe something with this rom is messed up(unlikely, but I was grasping at straws at this point), so I flashed to a different rom, think it was sprint lovers.. same thing. Flashed to CM7, same. Unrooted and flashed back to stock, took it into Sprint, which they did a hard reset and told me since it shows the 3G icon in the top bar, it is on 3G and working fine. This is ofcourse bull**** since the Evo shows that 3G icon even if its on 1xRTT signal..Sprint tossing out wrong info, shocking I know. I've used Antennas and OpenSignal apps to show that it is indeed connecting to the 1xRTT signal. Downloading anything on the phone is ofcourse slow too, I've had google maps updating now for about 15 minutes, and it is 5.86MB.
Would anybody have some suggestions of what I can try to get the 3G radio working again?
Anybody have a suggestion of what I could try here? I've changed my PRL to the Verizon one, which gives the same results. Still having the same problem.
ya its calkulin's 1.8. the new extended mobile data menu hack has a messed up default that sets it to evdo only by default, messing up everything else. switching roms doenst help. go back to calk's 1.8 and type in the dialer ##3282# select view only and make sure mode of operation is on automatic.
Hi,
I have some data connection problems since the first day i bought my DHD.
The phone reception signal bar are always changing even when i am not moving at all.
It can generally move from H to 3G a few times, then go to E and then G, in a few seconds.
it always moves, my internet connection is very slow.
It's as if the radio was always trying to renegociate the method of communication (GPRS, 3G, etc) with the operator's antenna
When i am in a phone call, i got disconnected sometimes or the sound stop during a few seconds (the time the radio switch from 3G/H to E/G i guess)
When i disable WCDMA from the settings i get a quite stable sound during my phones calls (maybe because the phone no more tries to negociate). But for Internet... it's just slow.
I tried a few ROMs, and their respectives radio rom (the one with the IRL branded in the ROM) i sometimes thought it was better but always it's still too unuseable.
I tried my SIM card in an iphone 3GS and i am usually in Edge (sometimes 3G) but when its 3G i can surf quickly during hours (if i don't move). This is not the case with the DHD.
btw i am on the french carrier SFR
If any of u had any clues i would really appreciate your help.
Thanks you
what rom are you using and what radio and ril................... now what radio are you on now
OP already stated he tried numerous ROMS and their cooresponding radios. Sounds like the signal is that degraded that any radio/ril combination will not help.
Thanks for your replies.
As said i tried many ones with their respective recommanded radio.
I am actually trying Radio_12.62.60.27_26.13.04.19_M with Android Revolution HD 4G_6.1.1 with no sense script.
Are there tests i could do to identify if its a hardware problem (like standing in front of an antenna and running some special tool maybe)
Btw, i also tried :
-RCMix3D_Runny_v1.3 but does work with internet pass through (wich is really important since i can't use internet from my phone carrier...)
-niarkMIUI-3.9.1
-LeeDrOiD_HD_V4.0.0-SE-3.0-BETA with Radio_12.54.60.25_26.09.04.11_M2
-cm_ace_full-203 with my stock radio ROM
-virtuous_unity-v2.37.0 with i don't remember wich one...
P.S : i would be Glad to test any ROM / Radio combinaison you would suggest me.
Thanks by advance for your attention
if you tried all those roms and diffident radios seems like its more like a hardware or provider issue does it happen off different towers or maybe you can go to one of the stores and try the phone at the store with yours at the same time?
Thank for the advice indeed i need to try this.
Do you know what i need to revert back for the tech not to tell the waranty is over since i have flashed my phone ?
Does i need to reflash the recovery etc? is there some tutorial in this subject because if i go to the store with my custom rom i guess i won't get too much help :/
Don't even take out your phone, your going to say your just looking, don't show anyone your phone, they won't even know what to look for, just test your phone to the one at the store, make sure apn's match. But if you return your phone you'll need to ruu back to stock. You can search easy s-on
Sent from my Inspire 4G using XDA App
What happens if you manually select 3G only, or 2G only from the settings menu? Does it just lose signal, or stays strong?
Hi
If i select 3G only
I first get no reception (as if when switching from 2G to 3G the radio had to restart)
Then the 3G signal appear strong, decrease slowly in less than 30 seconds, and after all, it seems quite stable.
The bandwidth is good i am downloading fastly
(i am commenting in real time)
Still no deconnection.
I will try it during the whole day and tell how it is behaving.
umm during a few seconds, there were no indicator (no 3G or H), just 3 bars.
It then restarted in H with 1 bar (i am not moving at all)
What will happen if i have no 3G in my area ? I won't be able to receve a phone call ?
Thanks
elfrancesco said:
Hi
If i select 3G only
I first get no reception (as if when switching from 2G to 3G the radio had to restart)
Then the 3G signal appear strong, decrease slowly in less than 30 seconds, and after all, it seems quite stable.
The bandwidth is good i am downloading fastly
(i am commenting in real time)
Still no deconnection.
I will try it during the whole day and tell how it is behaving.
umm during a few seconds, there were no indicator (no 3G or H), just 3 bars.
It then restarted in H with 1 bar (i am not moving at all)
What will happen if i have no 3G in my area ? I won't be able to receve a phone call ?
Thanks
Click to expand...
Click to collapse
If you force it to 3G only, and you move out of 3G area, then you should either get a no signal indicator, or if you have roaming enabled, you would get the roaming indicator. I'm curious now because as you said you aren't moving, and it's still changing. That shouldn't happen. Hmmm
Hello xda. I need some help with my GS3 and LTE. I rooted my phone on day one and have moved from rom to rom. I live in the SF Ba. Area and they are turning LTE on. Using sensorly I found some LTE areas, but my phone won't connect. I have tried different roms: CM10, Paranoidandroid, Ktoonsez, and now Liquid. I started with radio LJ9 and am now on LJ7.
I hope someone can give me a few ideas on what to try next. I heard updating the PRL can help, but I don't know how to do that.
Sorry if I did a poor job of searching, I am on my tablet, on 3G, and I couldn't find much
To update your profile and prl (prl is for roaming and doesn't effect lte).
menu -> settings (scroll to the bottom) -> system updates -> update profile / update prl
I'd odin stock JB or ICS and test LTE that way.
Though all of the ROMs you listed should have perfectly working LTE.
good luck
I flashed back to a Odex stock, and updated my profile and prl (just incase). I still don't seem to get any LTE.
FinalStar said:
I flashed back to a Odex stock, and updated my profile and prl (just incase). I still don't seem to get any LTE.
Click to expand...
Click to collapse
Don't feel bad im goin thru the same thang had the phone four days rooted it the second day i had it NO LTE to date wtf sprints trippin
samsung GSIII rooted
I know! Don't you love paying 4G price for 3G service? Fo real!
Well I'm not 100 % on what fixed it but it suddenly started working. Speed seems a little slow. 5mbps up and down. Don't people get in the range of 10 to 20
FinalStar said:
Hello xda. I need some help with my GS3 and LTE. I rooted my phone on day one and have moved from rom to rom. I live in the SF Ba. Area and they are turning LTE on. Using sensorly I found some LTE areas, but my phone won't connect. I have tried different roms: CM10, Paranoidandroid, Ktoonsez, and now Liquid. I started with radio LJ9 and am now on LJ7.
I hope someone can give me a few ideas on what to try next. I heard updating the PRL can help, but I don't know how to do that.
Sorry if I did a poor job of searching, I am on my tablet, on 3G, and I couldn't find much
Click to expand...
Click to collapse
On CM10 (and all AOKP ROMs based on it) eHRPD authentication is not working right yet. I think they're close to a fix, but for right now, if you're in an area with a weak LTE signal; you're gonna have some problems
Hi, it's been a while since I posted on the forums. I've had a problem with this for a while now, but never bothered to ask you all. i don't get certain types of signal with the stock rom and aosp roms. For stock, I get 4g data, and I am able to make calls while roaming but not while I am on regular 1x (connects but I can't use it). Also, signal is iffy, sometimes it connects/randomly disconnects. For aosp, I get almost no signal, only roaming. I think that I didn't mess up my efs folder, my imei is still the same as the DEX on the back of my phone. Do you guys know what is wrong or how to fix this? I want to be able to use my phone again...
What modem are you on? Firmware or ROM? I'm using NE2 with rwilco's stock ROM and a GSM sph-l900 with t-mobile... I get 3G and 4G (hsdpa+)... before I use to get lte/3g/1x and I use roam control when I'm in an area where I know I don't have a good signal...