Please can some one help me with how to connect my Tmobile UK MDA III to activesync wirelessly? I have tried, my UX50 can hotsyn wireless, thought it would be easier with microsoft. Please help
read these 2
http://www.geekzone.co.nz/content.asp?contentid=2417
http://www.geekzone.co.nz/content.asp?contentid=3163
Wireless sync
I have read those, but i meant with Wifi, I have a wireless router that works with MAC filtering, my pda is on the list and it can surf the web at home, but i thought about syncing when i am downstairs in the kitchen or living room, i could do this with my UX50, turn on Wifi and hotsync wirelessly. So i went through the Active syn and it seems to have this feature i see it, but i can;t configure correctly. Please any help will be good.
Why dont you use Bluetooth to sync with your PC for surf web wireless ?
This way is quite good.
Hello I am currently Using Active Sync 4.5 and windows 6 with vp3g 3.62.3 Sometimes while connected to active sync and fully synced for some reason the phone will just randomly disconnect and when i try to reconnect it fails. This also happens when using internet connection sharing program through usb. anyone know whats going on??
roro09 said:
Hello I am currently Using Active Sync 4.5 and windows 6 with vp3g 3.62.3 Sometimes while connected to active sync and fully synced for some reason the phone will just randomly disconnect and when i try to reconnect it fails. This also happens when using internet connection sharing program through usb. anyone know whats going on??
Click to expand...
Click to collapse
I also had the same problem, i discovered it mostly happened when i was running alot of process heavy programs on my computer at the same time. Peer2Peer software(torrents), WinAmp, World of Warcraft, multiple Firefox windows and Secure CRT. I found closing most programs would fix the problem.
I also have active sync issues on my laptop..(go figure) i am still using the process of elimination through this troubleshooter
http://www.pocketpcfaq.com/faqs/activesync/tshoot-as4x.htm
Best of luck
hello
i use the achilles_ROM_ver_3_YouTube the acivesync is enable but i can't update my weather programm
can any body help me
tanks
disconnect the cable to close active sync mode and update it over gprs or 3g connection
Tell us a bit more
rachid202446 said:
hello
i use the achilles_ROM_ver_3_YouTube the acivesync is enable but i can't update my weather programm
can any body help me
tanks
Click to expand...
Click to collapse
Hi, I have the same ROM and for me it is not a problem to update the Weather program. Maybe it is comes in handy to explain your method to of connecting (to PC, WiFi)
For me; I update it all through WiFi with success (Weather, email, QuickGPS). I haven't tried it yet with active sync.
Regards
kerni said:
disconnect the cable to close active sync mode and update it over gprs or 3g connection
Click to expand...
Click to collapse
I'm sure he could've guessed that answer. But I doubt thats what he wants, like me he might have a very high fee to connect over GRPS and 3G is not an option as its not a even feature of the P3300.
I also have problems syncing and connecting to the internet via activesync sometimes, the best course of action for me was to disconnect the phone form the PC, kill activesync on the phone and reconnect to the PC, if that doesnt work try a soft reset on the phone and try again.
7 minute solution when active sync not works
jcschrijver said:
Hi, I have the same ROM and for me it is not a problem to update the Weather program. Maybe it is comes in handy to explain your method to of connecting (to PC, WiFi)
For me; I update it all through WiFi with success (Weather, email, QuickGPS). I haven't tried it yet with active sync.
Regards
Click to expand...
Click to collapse
Mostly the problem occurs when connecting to 2 different PC's.
What works for me ( I usually sync with 2 pc's; Work & @Home) when connecting with active sync not succesfull;
- I back up all my information with PIMbackup [1-2 minutes]
- Remove a partnership (or both) on my Artemis (Backup, because removing a partnership deletes appointments, contacts, call logs, tasks, etc.) [< 1 minute]
- Reconnect through active sync and setup a new partnership, in general is the problem-not-be-able-to-sync solved [3-4 minutes]
I hope this will work for you
Regards
When I'm in the car I have the TP2 connected using bluetooth:
-with the car as a car kit
-with my laptop to share my internet connection
-with my laptop to synchronize my outlook items
This all works, but not at the same time. So if I get in the car the head set mode is switched on and I can share my internet connection. As soon as I startup ActiveSync to synchronize the bluetooth connection for internet sharing is closed.
If I want to start internet sharing again I get the message that ActiveSync needs to be closed before I can share my internet connection.
At work (obviously I don't have headset mode for the carkit switched on) it is possible to have both ActiveSync and the internet connection over blue tooth at the same time.
Any idea to why this is happening? I would think perhaps 3 bluetooth devices can not be active at the same time.
With sharing internet you mean internet to your phone, or internet from phone to your laptop? Makes a diffrence, because internet to your phone and synching is the same bluetooth connection.
I mean sharing my internet connection off the phone to the laptop. This has been working fine on my mda vario III (Tytn II)
And again something new: if the phone is just lying on my desk it is impossible to have internet shared and Active Sync connected at the same time.
As soon as I connect the device to a mini USB (either another computer or the charger) it is able to have both connections over bluetooth.
With my device I can connect to max 2 connections. one i use for my mbw-150 watch exclusive and the other data connection with my notebook. If i activate a third for example to another phone the connection with my watch is seperated.
wireless sync is only possible if the phone is connected to a charger for 10 minutes, isnt it possible to sync the phone with wifi without having the phone charging?
//Jesper
jbnhf23 said:
wireless sync is only possible if the phone is connected to a charger for 10 minutes, isnt it possible to sync the phone with wifi without having the phone charging?
//Jesper
Click to expand...
Click to collapse
Doesn't look like it. According to the official page:
• Your phone and PC are both connected to your home Wi-Fi network. Note that wireless sync is not supported on workplace Wi-Fi networks.
• Your phone battery has at least a medium-level charge ( ) and your phone is connected to an AC power adapter (that is, your phone must be connected to the wall charger and not connected to your computer).
• You're not interacting with your phone. For example, you're not touching things on the screen, the backlight is off, and music and videos aren't playing (it's OK if a song or video is paused).
Down at the very bottom of the topic on the official site "There is no way to manually force it to occur."
Thus the answer is no.
keyboardP said:
• Your phone and PC are both connected to your home Wi-Fi network. Note that wireless sync is not supported on workplace Wi-Fi networks.
Click to expand...
Click to collapse
I haven't been able to do wireless sync at all yet. It sets up fine, but nothing happens. Over night, not touching my phone at all. >50% charge.
"Workplace Wi-Fi networks". What does that even mean? Am I working too hard at home? Does my phone think I'm at work all the time?
WP7 Wireless sync Setup error C00D07C9
Hi,
I am trying to setup wireless sync in Zune and it gives me this error mentioning zune is not able to connect to wireless. can anyone please help.
I looked at the web help and more details on the error and also tried all kinds of encryption with no luck. There is not much explanation on the microsoft website also. Please advise.
Seems to work for me, but i forgot about it until, randomly a few days ago on wall charge, Zune popped up on my PC and it started syncing,
I seem to USB charge it rather than wall socket, so was surprising.
I was like "Huh.........oh yeah"
Thanks for the reply. I disabled symantec client firewall and anti virus and that did the trick. Thanks again.
raman_mogal said:
Thanks for the reply. I disabled symantec client firewall and anti virus and that did the trick. Thanks again.
Click to expand...
Click to collapse
i don't think that is an ideal solution. see if you can add an exception in the firewall for zune software, and perhaps fine out what port zune runs off and allow access for that port to zune. you want to keep your firewall and anti virus on. not sure what port zune is on though.
If you use Microsoft Security Essentials's free AV solution / Windows Defender firewall, you won't have any problems with wireless sync. Remember to leave your PC switched on though.
The Gate Keeper said:
i don't think that is an ideal solution. see if you can add an exception in the firewall for zune software, and perhaps fine out what port zune runs off and allow access for that port to zune. you want to keep your firewall and anti virus on. not sure what port zune is on though.
Click to expand...
Click to collapse
tHat was done and enabled again after setup. Yesterday when I disabled again, it triggered sync. I added all exe from Zune folder as exception and need to test today
Thank you
Hi All,
Unfortunately i still could not get over the problem. When symantec is on, wireless sync is not happening. When i disable it for 30 mins, it happens in next few minutes.
As i do not want to do this everytime, can you please advise what can be done.
I have looked at the zune folder and added all exe and dll there in the symantec list to permit. I also installed zunedevices.exe and also added all the files which are showing in the file list.
I searched microsoft, google and could not find any instructions for symantec.
Please help.
I also cannot get wireless sync to work. I do not have Norton on my computer though. The only Anti Virus I run is Microsoft Security Essentials. The computer that I am trying to sync to is a laptop and is also wirelessly connected to the internet at my house, could that be an issue? I have the laptop set up where it never goes to sleep, even if is opened or closed.
Any help would be appreciated!
doejohn531 said:
I also cannot get wireless sync to work. I do not have Norton on my computer though. The only Anti Virus I run is Microsoft Security Essentials. The computer that I am trying to sync to is a laptop and is also wirelessly connected to the internet at my house, could that be an issue? I have the laptop set up where it never goes to sleep, even if is opened or closed.
Any help would be appreciated!
Click to expand...
Click to collapse
Are you facing issue while setting up the sync itself. You will need to connect the device with wire to the laptop and setup wireless sync. If you are facing issue in this stage itself, you may try changing the wireless encryption and try.
I am facing issue with setup and sync also when norton is on. I disabled it and could able to setup sync however everytime i want to sync, then also need to disable huh..
I was able to set up the sync fine. It just never actually works. I've undone the wireless sync and redone it several times.
I'm debating doing a restore on the phone and trying it again. BUT don't want to go that route unless I absolutely have to. It seemed way easier to set my phone back up after a flash on 6.5
I'm also in the same boat but dealing with a corporate firewall (which I am admin to so can make changes) That said, I'm trying to follow the instructions for my specific error which are;
•If you're using Shared Key encryption with a WEP-based network, you need to manually select that network type. Zune assumes that any WEP-based network is using Open System authentication. To manually select Shared Key encryption:
1.
In the Zune software, click Settings, Device, Wireless Sync.
2.
Click Set Up Wireless Sync, Show Advanced Settings.
3.
Under Network Type, select Shared Authentication Using WEP Key and enter your network key.
My problem is with item 2. I cant see anywhere the option for Show Advanced Settings. Can anyone else confirm this?
Thanks.
I also could not find the place to change settings.