Hi All,
I'm using RA-desire-v2.0.0 reovery.
When i do a backup everything goed ok.
But when i want restore it.. i get a error:
Error: run 'nandroid-mobile.sh restore'via adb
Can someone tell me why the restore will not work from the Recovery itself?
Related
Dear XDA experts.
yesterday i was trying to install the new leedroid rom on my HTC DESIRE.
somehow after i flashed factory settings, i am no longer able to mount my sdcard.
I tryed to mount in from the recovery-partitions and from the ADB by myself, unfortunately it was no luck at all.
The error i get is: "mount: mounting /dev/block/mmcblk0p1 on /sdcard failed: No such file or directory"
The condition of the phone is that it is totaly formated, only recovery exists.
I have a nandroid beckup on my computer, i tried to flash i from fastboot but it says no android-info.txt found.
Hope you will be able to help me....
Hi,
I have a problem with my HTC Desire Z.
Yesterday I have flash my phone with Virtous doubleshot ROM.
Since I do this my phone freeze when I start it.
I have test to install another ROM with Cloworkmod Recovery 3.0.2.4 and I have this following error :
Formatting system ...
E:Error in /sdcard/XXXXX.zip
(Status 1)
Installation aborded
When I go to mounts and storage menu for format /system I have this error:
Error formatting /system!
What can I do??
[email protected] said:
Hi,
I have a problem with my HTC Desire Z.
Yesterday I have flash my phone with Virtous doubleshot ROM.
Since I do this my phone freeze when I start it.
I have test to install another ROM with Cloworkmod Recovery 3.0.2.4 and I have this following error :
Formatting system ...
E:Error in /sdcard/XXXXX.zip
(Status 1)
Installation aborded
When I go to mounts and storage menu for format /system I have this error:
Error formatting /system!
What can I do??
Click to expand...
Click to collapse
It seems you may have a corrupted .zip installation file. Try downloading again or another rom to test.
Sent from my HTC Vision using XDA App
I have test with Virtous Unity 1.31. I have the same problem
[email protected] said:
Hi,
I have a problem with my HTC Desire Z.
Yesterday I have flash my phone with Virtous doubleshot ROM.
Since I do this my phone freeze when I start it.
I have test to install another ROM with Cloworkmod Recovery 3.0.2.4 and I have this following error :
Formatting system ...
E:Error in /sdcard/XXXXX.zip
(Status 1)
Installation aborded
When I go to mounts and storage menu for format /system I have this error:
Error formatting /system!
What can I do??
Click to expand...
Click to collapse
I have this exact same problem! I've tried different ROMS and tried restoring my old backup and no go
I have gone as far as trying to use fastboot to send me back system img and I get a data length is too large.
Mytouch 4 G
Clockworkmod 3.0.2.4
T-mobile
For the data length too large error, you might be in hboot rather than fastboot mode. Make sure there is FASTBOOT USB in red near the top.
-Nipqer
Just reflashed stock 4.0.2 on my GN, but when I tried backup in Clockworkmod recovery 5.5.0.0 I keep getting an error message:
E:unknown volume for path [/sdcard/clockworkmod/backup/2012-01-03.0.0.51.01]
Can't mount backup path.
E:unknown volume path [/sdcard]
E:Can't mount /sdcard/
I have some zip file in the root but I can't access them either. Please help, I had ARHD 2.1.2 rom but was having issue with my camera app freezing on me, so I went back to stock but now I can't backup or see the zip files on the phone.
Thanks
Got it, was flashing the wrong file. Needed 5.5.02.
I've searched around for a couple hours and couldn't figure out how to fix my situation.
I've tried installing the rom: OmniMetal-4.4.2-20140523-maguro
but it failed with:
E:Error in /tmp/sideload/package.zip
(Status 7)
* Verifying filesystems...
* Verifying partition sizes...
Error flashing zip '/sdcard/0/OmniMetal-4.4.2-20140523-maguro.zip'
I don't have a backup of the original rom on the device.
I've tried using ADB to push the original rom but I get:
error: device not found
Also in windows Device Manager the phone shows up as $ro.product.model which may be why ADB doesn't recognize it.
TWRP 2.3+ has sideload but that doesn't help me as I have 2.1.2 installed
Any help from you guys in getting my phone fixed would be greatly appreciated!
Bryan
EDIT:
I've finally been able to connect to the phone with ADB and have fixed it.
Hello,
My tablet had a battery drain problem so I changed the motherboard and tried to install lineageos 14.1 again.
After replacing the motherboard, I turned on the tablet to activate usb debugging. The rom installed wasn't "complete", it looked like an interface for professionals to copy data from the old motherboard to the new... Maybe one of you knows what I'm talking about.
I flashed twrp and booted in recovery mode. Then I tried to wipe data but got errors (for instance "cache partition not found" or "hidden partition not found" or something like this. I'm sorry I didn't copy the error message :/
I tried to reboot anyway but I'm now unable to boot on the rom nor on recovery mode. I have a message : "POWER RESET or UNKNOWN UPLOAD MODE" and "ATconsole=ram loglevel=4 sec_debug. Level=1 cluster_power=1 androidboot. debug_level=0x494d sec_"
Only download mode is working.
So I'm trying to install the stock rom, downloaded from sammobile. On linux via Heimdall I got this error when flashing system.img and hidden.img :
Code:
Uploading SYSTEM
0%
1%
ERROR: Failed to unpack received packet.
ERROR: Failed to confirm end of file transfer sequence!
ERROR: SYSTEM upload failed!
Ending session...
ERROR: libusb error -7 whilst sending bulk transfer. Retrying...
ERROR: libusb error -7 whilst sending bulk transfer. Retrying...
ERROR: libusb error -7 whilst sending bulk transfer. Retrying...
ERROR: libusb error -7 whilst sending bulk transfer. Retrying...
ERROR: libusb error -7 whilst sending bulk transfer. Retrying...
ERROR: libusb error -7 whilst sending bulk transfer.
ERROR: Failed to send end session packet!
Releasing device interface...
On windows via Odin, I cannot flash the tar.md5 file either, it fails.
Someone could help ?
Or at least explain why I got these errors in twrp?
Thank you very much !!!!!!
Update :
I found a way to boot in recovery mode (twrp 3.3.1-klimtwifi) : unplug the battery, replug it and home + vol up + power.
So here is the error when I try to wipe data : "Failed to mound '/hidden' (Invalid argument)"
I installed the old motherboard and I'm doing a full backup on my sd card on TWRP, including EFS partition.
On the new motherboard I can't restore the backup because in twrp > restore > sd card : "No partitions selected to restore".
So here's where I am now :
I can boot into twrp but have an error message when trying to wipe data.
I have a full backup of the old motherboard with lineageos installed and working but i'm not able to restore it
Any help appreciated
And also, when I try to sideload the lineageos zip file I get this :
Code:
Starting ADB sideload feature ...
Installing zip file '/sideload/package.zip'
Target: samsung/klimtwifixx/klimtwifi:6.0.1/MMB29K/T700XXU1CRF1:user/release-keys
detected filesystem ext4 for /dev/block/platform/dw_mmc.0/by-name/SYSTEM
Patching system image unconditionally...
E1001: Failed to update system image.
Updater process ended with ERROR: 7
Ok, I fixed the restore issue by moving the backup files to : sd_external/twrp/BACKUP/[myserialnumber]
So now I can restore all partition except System, System Image and Hidden.
Error : extractTarFork() process ended with ERROR: 255
I still can't sideload the custom rom. But the error message "Failed to mound '/hidden' (Invalid argument)" disapeared
I fixed/unbricked the tablet by using SamFirm to download a 3 files stock firmware.
I installed it with Odin and it worked like a charm.
Then I could install a custom rom