Related
I have a Blue Angel as mentioned in my signature and I have what I believe are all of the files needed to try and install WM2005 Build 14326.0.0.0 onto it.
Here are the WM2005 files I currently have:
HimaUpgradeUt - 512KB - 5/5/2004 4:54PM
nk.nbf - 32,769KB - 3/21/2005 9:08AM
And the following came from my existing ROM:
ms_.nbf - 16,833KB - 2/3/2005 7:45PM
radio_.nbf - 4,097KB - 2/3/2005 7:45PM
I also have a good copy of ActiveSync Beta 4.0.0 and have all of the instructions that were made in the main WM2005 post for installing on the Himalaya and I'm assuming it should be the same for the Blue Angel.
My device info currently reads:
Model No: PH20A2
Windows Mobile 2003 Second Edition Version 4.21.1088 Build 14132
ROM Version: 1.36.00 WWE
ROM Date: 01/13/05
Radio Version: HA00_140
Protocol Version: AA3.3.301
ExtROM Version: 1.36.110 WWE
Hardware Version: 0041
This is what it came with out of the box, I have not installed the updated ROM Audiovox released the day the phone was released because I have never had a single problem and some people who upgraded reported problems and that some files were a day older than the version that shipped in the original ROM.
-------------------
Now my 1st question, the newest updated ROM installer package from Audiovox which was released 3/4/2005, has a different version of the upgrade utility, it's called "HaUpgradeUt - 424KB - 12/23/2004". The package it was included in from Audiovox's website was called "HA_SPCS_13600_113_00140_6600". Which upgrade utility is the best to use or does it not matter?
Now my 2nd question, has anyone yet tried this on a Blue Angel? Is there anyone here who really knows thier stuff who is willing to help me if I get lost or screwed up so I can be the Blue Angel WM2005 test pig?
Thanks!
hi
i have a pda2k with 1.33 rom and radio rom 1.08 and my cooked rom
i tried the upgrade but got the device authentication error.. tried it with the explained patch and the other method in original wm2005 post.. the himupgrade starts the procedure and then stops after some time saying an error occured..
but you go ahead and try it..may be you will do something differently and will succeed..
note: i have tried the xda 2 SE rom and imate jam rom and almost tried the alpine rom on my pda2k.. there is nothing you cannot revert back from
just incase if you are curious what happened after the above roms..my device didnt boot.... no problem...just unplug the usb port of the cradle and run a wwe rom made for xda 2s or pda2k ...everything will work then!
good luck..
keep us posted!!!!
in the above post: i mean unplug usb then replug usb and then run the BAupgrade utility....
can you upload hte 1.36 rom you have??? does your device have wifi and camera???
thanks
zohaer21 said:
tried it with the explained patch and the other method in original wm2005 post.
Click to expand...
Click to collapse
Where is the post for this "explained patch method" you are referring to? Also I'm considering the post titled "Microsoft Windows Mobile Version 5.0 I can share" as the original WM2005 post so we are on the same page in our thinking on that one.
The ROM is a free download from Audiovox, I guess I could upload it though.
I'm assuming the BAupgrade utility is on this site for download?
My device does have the camera but no WiFi, it has EV-DO instead. It's a CDMA phone, not a GSM phone...
your running the Verizon EVDO version of the the BlueAngel a CDMS 1xrt yada yada device. Most new ROM images are made for GSM phones then latter altered to talk to CDMA modules. In this case I think ot only would you not have a "good" experience but would warn against it. Second BlueAngel devices have OEM driver for the slide out keyboard. You will most likely loose for sure its use with this new OS. This is why the only devices it is worrking on right now are non-hardwired keyboard devices. Also there seems to be a notable diff in the hardare implimentation between HTC based devices. What software might work with one may not at all or damage another. Sorry for the down news but I think unless you have a keyboardless device I would not recomend playing with it. Just my 2 cents.
What you can do though is grab some of the elements (image files) from the new OS in other threads here, and overwrite the files on your device. Kind of like adding crome package or racing stripes. still the same car, just feel new :wink:
Thanks for the input. I'm running the Sprint version, not the Verizon one, same difference though pretty much, lol. 2.5G Vs. 1xrt and both have EV-DO, and then of course the frequency of the Verizon digital and Sprints PCS, but yeah both CDMA
I really couldn't care less about the keyboard, I don't even use it, never really have. Honestly, I work for CompUSA and if this thing gets buggered up I'll just exchange it out. I'm going to do a full backup tonight, hard reset, dump the existing ROM and then start the process just for grins to see how it goes. As long as it's not dog slow, text messaging works and email along with voice functions I'll be happy as heck. It'll atleast be fun to screw with and then I can always go back later.
I'm still unclear on some things like the country code and stuff that was mentioned in the other posts. Once I know I have all the facts and all of the files I'll give it a try and post back here. I'm off Sunday, Monday, & Tuesday so I'll have 3 days straight to play. I have to say my only real concern is it working with the CDMA radio which hopefully it will since I have a good copy of the latest Radio ROM for it...
hi 92GTA
yeah were on the same page..
wm2005 i can share is the original post..and i think page 10 has the answer (im not entirely sure though the post has now 17 pages!!!)
@ 92GTA : can you share this 2k5 ROM ? can you upload to a ftp and give us a link
bad :
read properly : he WANTS to install WM2005 on his IIs.
Why should you people go around risking your devices like this?
It's like putting diesel in a petrol car..things will screw up...
The 2005 upgrade currently available is only meant for XDA II devices, not IIs or II mini...or whatever. Hardware differences will render your efforts rather futile save for a massive hack.. Sigh.
indecided said:
Why should you people go around risking your devices like this?
Click to expand...
Click to collapse
dude what the hell is indecided..its either undecided or indecisive
the latter being you :twisted:
already tried this guys, it doesn't work, the bootloader cannot read the CE image, nd therefore hinders the device useless, but i managed to flash back to 1.31 and all is working now.
Hi Guys,
Im here with the same question,,
Can we really upgrade XDA IIs to WM 2005... or anyone haas done it.
someone said we shouldnt do it,, can I ask why?
Thanking you for your time.
hmmm...
Has anyone found a way to get WM5 to work on a blue angel??
I am new to windows ce,
however i have written a disassembler for windows ce arm executables
(dunno if it is of any use for this?)
and i am not affraid to develop more
if there is anyone who has any idea how to go about making wm5 work
i'd be glad to help
(ps i have an imate pda2k)
Friends the help, at my friend phone the Blue Angel is necessary, necessary WM2005 on it can to help to send? Write on
[email protected]
ISQ 1366613
Bobi1 said:
Hi Guys,
Im here with the same question,,
Can we really upgrade XDA IIs to WM 2005... or anyone haas done it.
someone said we shouldnt do it,, can I ask why?
Thanking you for your time.
Click to expand...
Click to collapse
you can find all the upgrade information at the following thread:
http://forum.xda-developers.com/viewtopic.php?p=138733#138733
............... ??
92GTA said:
zohaer21 said:
tried it with the explained patch and the other method in original wm2005 post.
Click to expand...
Click to collapse
Where is the post for this "explained patch method" you are referring to? Also I'm considering the post titled "Microsoft Windows Mobile Version 5.0 I can share" as the original WM2005 post so we are on the same page in our thinking on that one.
The ROM is a free download from Audiovox, I guess I could upload it though.
I'm assuming the BAupgrade utility is on this site for download?
My device does have the camera but no WiFi, it has EV-DO instead. It's a CDMA phone, not a GSM phone...
Click to expand...
Click to collapse
Sign me up too, CMDA but my has 1x instead of EV-DO. I would be willing to try it.
Where on Audiovox is the 2005 rom?. All I've ever seen are the 2003se updates.
Hi,
I have got confused with the various bricked posts, misnamed WWE update posts etc.
What I would like to know is the following:
1. Does the imate update (english) work on the MDA Pro?
2. Does anyone have the original T-Mobile version for returning it to the release T-mob version?
3. Does doing an upgrade invalidate my warranty with T-Mob?
My issue with current roms is that the device crashes at least once a day, and I am getting fed up with reboots.
Thanks,
Joe
It works fine with the MDA Pro, I have mine running the JASJAR Rom.
ftp://xda:[email protected]/Uploads/MDA_PRO_JASJAR_ROM_UPGRADE_WWE_11353_137_10301.zip
Download that, it has the No Device ID exe.
hi, did the ROM change speed up your MDA pro in any way? also does the video calling feature still work.
This really interests me too.. Any answers out there please?
P :?:
Mine does seem a little quicker, especially after overwriting the iMate supplied .tsk files for the homescreens.
WiFi a *bit* more stable, but not perfect.
So... If I download that file, unpack it onto my UK T-Mobile MDA PRO and run it, I will have the latest software on the MDA PRO?
Are there any 'issues'?
Will I lose any data\ programs\settings etc.?
P
psteel said:
So... If I download that file, unpack it onto my UK T-Mobile MDA PRO and run it, I will have the latest software on the MDA PRO?
Are there any 'issues'?
Will I lose any data\ programs\settings etc.?
P
Click to expand...
Click to collapse
You run the install from a PC, having put the phone into "bootloader" mode. As far as I know, its a newer ROM version than is supplied with the MDA Pro, and also doesn't contain the T Mobile customisation. It DOES include MSN and Skype as standard, as well as a couple of other bits.
It will totally wipe your phone / settings, but if you select T Mobile UK after you install the new ROM, most of the T Mobile settings are reconfigured for you. You just have to do the 3G one yourself, but the details are in another thread (possibly in the main Universal area of this forum).
Imate produce regular ROM upgrades for their other phones, so it is likely they'll release a new ROM before Orange / O2 / T Mobile manage it.
Newbie
Just got the MDA pro. How do i upgrade the Rom? I dun really understand how to go to the registry as well? Any help?? Really appreciate it. Thanks.
The link for the update i mate jasjar rom is not working??
Someone moved it :roll:
ftp://xda:[email protected]_JASJAR_ROM_UPGRADE_WWE_11353_137_10301.zip
Newbie in need of help.
Thanks for the ftp link. Regarding about getting into the registry? How do i do that? And how do i update the rom.
I got some problem with my mda pro sync with my laptop?
It say cant detect the device. I cant install the driver either. Anyone have the same problem with the mda pro or only me?
Do anybody know how can i unlock the mda pro?
Thanks.
Reply really appreciated.
unlocking mda pro
Hi, I think the only way to unlovk the MDA at present is via the subsidy code from T Mobile. In the UK you can only do this after you have completed a month on contract and t mobile will charge you 15 pounds for the priviledge. On 02 the devices come unlocked for any network.
with ref to the ROM update to WWE jasjar, this is an absolute must for ALL t mobile users. I can confirm things are stable all round, but don't expect you can get away from those periodic resets - M$ seem to have built in this feature in all pocket PC OS ! - yes I am calling this a feature of the OS now.
Look around on the forums here on how to flash there are some very good posts about.
Remember, most important if you want stability only install essential software.
unlocking mda pro
Hi, I think the only way to unlovk the MDA at present is via the subsidy code from T Mobile. In the UK you can only do this after you have completed a month on contract and t mobile will charge you 15 pounds for the priviledge. On 02 the devices come unlocked for any network.
with ref to the ROM update to WWE jasjar, this is an absolute must for ALL t mobile users. I can confirm things are stable all round, but don't expect you can get away from those periodic resets - M$ seem to have built in this feature in all pocket PC OS ! - yes I am calling this a feature of the OS now.
Look around on the forums here on how to flash there are some very good posts about.
Remember, most important if you want stability only install essential software.
Mda pro usb activesync problem
Hi thank for the reply. You mean i should change it to the jasjar rom which is the link above? I am new to pda phones and need some help.
I cant connect my device to my laptop using usb. It say device not detected.
I install the software and it should work rite. Is there something i didnt do? I read the manual saying install the software then have sync relationship with the pc and device. How do i sync the relationship? Do i just plug in the usb to my laptop then it will automatically detect my mda pro?
Help. Thanks.
bit stuck
have the jasjar files on my computer but click on bootld and it says not valid 32 programme. Try and load the software but it says wrong country code. what am I doing wrong, MDA PRO first PDA
Re: bit stuck
cj136uk said:
have the jasjar files on my computer but click on bootld and it says not valid 32 programme. Try and load the software but it says wrong country code. what am I doing wrong, MDA PRO first PDA
Click to expand...
Click to collapse
is no one here?
try this post
http://forum.xda-developers.com/viewtopic.php?t=29354&highlight=
i tried to upgrade with my dopod 900 which purchased in taiwan...
but it says "error 120: contry id error"
"the rom image that you are trying to use is not designed to work with your device."
does anyone who can solve this problem?
please!
thanks
parkertseng said:
i tried to upgrade with my dopod 900 which purchased in taiwan...
but it says "error 120: contry id error"
"the rom image that you are trying to use is not designed to work with your device."
does anyone who can solve this problem?
please!
thanks
Click to expand...
Click to collapse
You just need to use the no device id update exe and it will work fine.
ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
someone moved it again...lol
From Rogers Activations website:
Announcing a FREE Windows Mobile 6 Upgrade for the HTC S621
Upgrade available until August 12th, 2008
Great news! It’s easy to upgrade your HTC S621, and the software is free! Now you can take your smartphone’s capabilities to the next level – saving you even more time and becoming even more productive while on the go.
Why Should I Update the Software on my HTC S621 to Windows Mobile 6 ?
By updating your software, you will gain access to the new features of Window Mobile 6 along with additional improvements.
Windows Mobile 6 delivers a familiar interface with improved functionality:
Filters to find messages, call history or contacts quickly
Enhanced calendar views and contact information to see the status of your meeting attendees, or reply to and forward messages to meeting organizers and other attendees.
Improved readability with the ability to send and receive email messages in HTML formatted emails (with pictures, tables, links etc.)
Retrieve, set, and change your Out of Office status and AutoReply notification
View MS Office documents easily to stay productive while on the go
Edit MS Word and Excel documents
Enhanced security features
For more information on Windows Mobile 6, please go to: http://www.microsoft.com/windowsmobile/6
For more information on upgrading your HTC S621 to Windows Mobile 6, go to rogers.com/s621upgrade
* Please be sure to review the instructions before downloading the software upgrade.
Warning: During the software update all 3rd party applications, that were not included on the device, will be erased. It is recommended that you verify that all third party applications that are currently installed on your HTC S621 are compatible with Windows Mobile 6 before proceeding with the update. Once the update has been completed, you will have to re-install these applications using Mobile Device Manager or ActiveSync 4.5 (or greater).
By upgrading your software you will lose all data that is currently saved on your HTC S621 including, but not limited to:
Contacts
Calendar events
Tasks
E-mail messages (including account settings)
Call History
Personal documents and files
Applications which were not included with Windows Mobile.
Important: Please ensure that you sync your HTC S621 with ActiveSync or Mobile Device Manager before beginning the update process.
Technical Requirements
PC with internet access running Windows XP or Vista
Mini-USB programming cable which was included in the HTC S621 product box at time of purchase
Microsoft ActiveSync 4.5* (http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx) or Mobile Device Manager (http://www.microsoft.com/windowsmobile/devicecenter.mspx)
* Note - Windows Mobile 6 is compatible with ActiveSync 4.5 or greater. If you do not have this version (or later) installed, you will not be able to sync your HTC S621 once updated.
Thank you so much for the update, I have been looking at the Rogers website a while now looking for it.
Just completed the update. Went from HTC WM6 to this one. This version seems to have a lot more free memory and includes office mobile in the rom.
I am about to try switching from the HTC Generic WM6 ROM to the Rogers ROM as well hopefully it will fix the name display issue for me.
Woooo...maybe I should flash the "Offical" version from Rogers
Damn and I spent so much time flashing the HTC rom... any thoughts so far from this rom?
edmondt said:
Woooo...maybe I should flash the "Offical" version from Rogers
Damn and I spent so much time flashing the HTC rom... any thoughts so far from this rom?
Click to expand...
Click to collapse
Just finished the upgrade from the Generic HTC WM6 ROM to the Rogers WM6 ROM. I have not yet bogged it down with all of my 3rd party apps but my general impression is that it seems much faster and responsive. I will update after all of my apps are re-loaded.
Definitely much faster and more memory available then the generic HTC ROM. My one wish is that I could have the Generic Comm Manager background back. The Rogers one is an ugly Blue with Yellow and Red Highlighting.
Hmm, this only work with Rogers?
Can someone post the Radio Version of this Rogers' WM6 update. TIA!
travisc said:
Hmm, this only work with Rogers?
Click to expand...
Click to collapse
It will work on any HTC Excalibur variants, provided your device is CID Unlocked or loaded with the USPL, see HERE (thanks jockyw2001!)
da_mayhem said:
Can someone post the Radio Version of this Rogers' WM6 update. TIA!
Click to expand...
Click to collapse
It is
4.1.13.47_02.98.90
da_mayhem said:
It will work on any HTC Excalibur variants, provided your device is CID Unlocked or loaded with the USPL, see HERE (thanks jockyw2001!)
Click to expand...
Click to collapse
Note that when you upgrade to the Rogers rom the SDA ApplicationUnlock isn't working ! When you reinstall the original software you can unlock your phone again.
I flash this ROM
but I cannot change the register key. when I use the resco to edit the key, it cannot be saved. is it locked by the ROM?
jhwo99 said:
Note that when you upgrade to the Rogers rom the SDA ApplicationUnlock isn't working ! When you reinstall the original software you can unlock your phone again.
Click to expand...
Click to collapse
How can unlock again ? could you explain how to "Reinstall the original software"?
thanks
wassamz's information is work. install the SP_AllowCertificateInstall.cab
The application is unlocked on this Rogers ROM
http://forum.xda-developers.com/showthread.php?t=302304&page=3&highlight=Rogers
I can't get it unlocked. Anyone else running into this?
Love the grey in-call screen
jt76542 said:
I can't get it unlocked. Anyone else running into this?
Love the grey in-call screen
Click to expand...
Click to collapse
You can try using SDA ApplicationUnlock by installing this Cab file from Rogers. After installing the Cab file run the app unlocker and reboot your phone. Your phone should now be fully application unlocked
jumran said:
You can try using SDA ApplicationUnlock by installing this Cab file from Rogers. After installing the Cab file run the app unlocker and reboot your phone. You phone should now be fully application unlocked
Click to expand...
Click to collapse
Worked Great!
Thanks for the quick response.
goraps said:
Just finished the upgrade from the Generic HTC WM6 ROM to the Rogers WM6 ROM. I have not yet bogged it down with all of my 3rd party apps but my general impression is that it seems much faster and responsive. I will update after all of my apps are re-loaded.
Click to expand...
Click to collapse
I definately prefer the Rogers WM6 ROM to the Generic HTC WM6 ROM. IT is much faster and more responsive plus it has more memory available. The only thing I don't like is the rogers branded startup and shutdown other than that this ROM seems much less bloated.
The Rogers WM6 does perform much better. IE doesn't use/leak as much memory. Does anybody know how to make a custom CAB file with registry settings and other preferences? I enjoy flashing a new OS on my phone daily, but it's the post-configuration stuff that's slowing me down.
Hi all - sorry about this, but I'm new to this. Got an Orange M700 - still running the original Orange branded WM5 OS: yup, Orange have mangled it. I've been reading the (many...many...many) threads and the wiki and... well I think I'm more confused than ever.
So, just wondering if someone can advise me on the best route to upgrade, and bear in mind I'm a graphics guy....
So, briefly
from the Orange WM5, is there a straight one-step upgrade to WM6?
What .cabs/versions should I be looking for? -> I know there are many you guys have tuned. I guess I'm looking for a fairly standard one? Unless you think otherwise!
Are there any major caveats (other than warranty/support invalidation)?
Need a little hand-holding...
Thanks in advance.
Hi, welcome..
I have M700 too, took the plunge a while back and loaded one of Mun's ROM's.
All I did was install activsync onto my pc and hook up the phone for the first time, once that ran its course I unplugged the phone powered down and removed the sim & sd card and then powered back up again.
Once up n running I plugged it back into the pc and ran the rom I had chosen, yes I was worried it might go wrong but I have to say it was and is very simple n straight forward. There is a WM5 Orange backup rom on here so if you ever did need to send back then you can flash this back onto the phone so it "looks" normal, tbh I'd doubt it would come to that.
I was using XP-SP2 at the time, not sure of anything different for Vista but that's where others here will put you straight, since then I have altered rom many a time and finally settled for Tom's Black'n'Blue - nice and fast and room to add what I want to add rather than be given. Oh and also update the radio rom to the latest version too, pretty much the same method.
Have a look at the roms and decide what you want Happy modding...
Only "gotcha" try and flash from XP, it is rumored to be problematic on a vista PC.
Also be warned flashing ROMs can be addictive, think i have tried 8 or 9 on my Trinity to find one i like, have yet to try the MUN one suggested in the previous post, looks like it will be next.
Ah, twas an early Mun rom and was WM5 - like I said the very first rom I'd flashed so I wouldn't flash to that now
Also realised why i hadn't tried it, i have tried several 6.1 ROMs and none of the WM6 ones. Probably will now i think about it though.
spv m700
Just joined the forum, thought I'd say hi.
I've just bought an spv m700 (following 2 years of the great spv m600), mainly because I wanted inbuilt gps.
The previous owner flashed it with Windows Mobile 6.1, I've yet to really test it.
First of all, I'm going to re-install all my Spb software (spb time, spb backup, spb mobile shell, etc) and transfer contacts etc via active sync.
If anyone has any advice or tips n tricks that you feel may benefit me, I'm all ears.
Cheers,
Matt.
Mattster_spv said:
Just joined the forum, thought I'd say hi.
I've just bought an spv m700 (following 2 years of the great spv m600), mainly because I wanted inbuilt gps.
The previous owner flashed it with Windows Mobile 6.1, I've yet to really test it.
First of all, I'm going to re-install all my Spb software (spb time, spb backup, spb mobile shell, etc) and transfer contacts etc via active sync.
If anyone has any advice or tips n tricks that you feel may benefit me, I'm all ears.
Cheers,
Matt.
Click to expand...
Click to collapse
First of all, welcome!
You have to know that the key to knowledge is searching, reading, and if none of those work, asking through posting!
So, happy enlightment and enjoy your device!
OK Monkeybox - hold out your hand - here's mine.
First thing - choose a ROM (sorry, you'll need to make your own choices). Judging by what you have said a LITE ROM would suit your needs.
I have tried most trinity ROMS. I like ADW's ROMs, am currently on Akeo's ROM but have tried LVSW, mUn, black and blue, PDAVIET, FInixNOver, ervius etc etc etc (Sorry if I've tried and forgotten your ROM!). Once you have your ROM, you should unlock the phone
1. (Hard-SPL - Service Providor Lock). http://forum.xda-developers.com/showthread.php?t=299659 This will enable you to flash a ROM with different carrier ID to you SPV M700. OK - Once you have hard-spl'd your phone, find the RUU (Rom Update Utility) exe file within the ROm that you downloaded.
2. Connect your phone (windows XP is best) using activesync and when activesync is connected, run the RUU Updater. The phone will switch off and go into "bootloader" (coloured bars on screen). If you get a connection error here, just run the RUU updater again. this time things should get going. When finished - your new ROM is installed - no more Orange!
3. Next update the Radio - search xda-developers.com using google for Trinity Radio - and choose 1.46 or 1.5x.
4. Install missing software (generally you'll need a GPS navigation software at least).
5. Enjoy.
6. If you like a ROM - donate to the cooker
7. Get a flashing addiction
8. Read all of the Kitchen threads
9. Cook your own ROM
10. Share it with us
11. Be eternally happy
nealed said:
OK Monkeybox - hold out your hand - here's mine.
First thing - choose a ROM (sorry, you'll need to make your own choices). Judging by what you have said a LITE ROM would suit your needs.
I have tried most trinity ROMS. I like ADW's ROMs, am currently on Akeo's ROM but have tried LVSW, mUn, black and blue, PDAVIET, FInixNOver, ervius etc etc etc (Sorry if I've tried and forgotten your ROM!). Once you have your ROM, you should unlock the phone
1. (Hard-SPL - Service Providor Lock). http://forum.xda-developers.com/showthread.php?t=299659 This will enable you to flash a ROM with different carrier ID to you SPV M700. OK - Once you have hard-spl'd your phone, find the RUU (Rom Update Utility) exe file within the ROm that you downloaded.
2. Connect your phone (windows XP is best) using activesync and when activesync is connected, run the RUU Updater. The phone will switch off and go into "bootloader" (coloured bars on screen). If you get a connection error here, just run the RUU updater again. this time things should get going. When finished - your new ROM is installed - no more Orange!
3. Next update the Radio - search xda-developers.com using google for Trinity Radio - and choose 1.46 or 1.5x.
4. Install missing software (generally you'll need a GPS navigation software at least).
5. Enjoy.
6. If you like a ROM - donate to the cooker
7. Get a flashing addiction
8. Read all of the Kitchen threads
9. Cook your own ROM
10. Share it with us
11. Be eternally happy
Click to expand...
Click to collapse
Thank you, and all others who have responded, for your greatly appreciated advice! I've been trying to get my head around the process. Have backed up using PIM backup and settings saviour... and with your hand holding, am about to dive into the world of modding!
It's a little daunting for a newbie (and I really do mean a newbie!), but with everyones help, and this fantastic community as a resource, bah, watch me fly! (I'll probably be back tomorrow asking how I can de-brick the phone ;O) )
Thanks again all.
Cool. Upgraded to WM6.1 - Akeos latest black one.
Have to say the functionallity is 10 times better already. Upgraded to the latest radio too.
HOWEVER... and this is where the newbie kicks in, I can't seem to start any data sessions. IN COmm manager I don't have the option to turn the data connection on (this was also the same prior to the radio upgrade)
Don't suppose anyone knows how to resolve this do they?
As I say, taking my first steps on the modding ladder, and it appears I may have slipped...
mkOnKeY bOy said:
Cool. Upgraded to WM6.1 - Akeos latest black one.
Have to say the functionallity is 10 times better already. Upgraded to the latest radio too.
HOWEVER... and this is where the newbie kicks in, I can't seem to start any data sessions. IN COmm manager I don't have the option to turn the data connection on (this was also the same prior to the radio upgrade)
Don't suppose anyone knows how to resolve this do they?
As I say, taking my first steps on the modding ladder, and it appears I may have slipped...
Click to expand...
Click to collapse
You have to define your data connection from "Start, Settings, Connections, Connections, My ISP, Add new" according to your carrier (ie GPRS, 3G). Same goes to configuring MMS, just that you do it at "Start, Settings, Connections, Connections, My Work Connection" and you also have to define it in Arcsoft MMS.
You will not be able to start them from the CommManager as they connect on demand as needed, but you can STOP the in the CommManager when they are connected since they don't disconnect automatically.
tnyynt said:
You have to define your data connection from "Start, Settings, Connections, Connections, My ISP, Add new" according to your carrier (ie GPRS, 3G). Same goes to configuring MMS, just that you do it at "Start, Settings, Connections, Connections, My Work Connection" and you also have to define it in Arcsoft MMS.
You will not be able to start them from the CommManager as they connect on demand as needed, but you can STOP the in the CommManager when they are connected since they don't disconnect automatically.
Click to expand...
Click to collapse
Once more, thanks to all who've helped me over the threshold - the data connection must have been an issue with the signal, as this morning it was happy to connect to mms/internet via 3G/GPRS and HSDPA (which I didn't even know Orange supported).
Cheers all. Your help has been absolutely spot-on. It's refreshing to come to a community where you not only happy to help newbies, without the usual sarcasm or pomposity you find elsewhere, but you do so in a clear and concise way that really does help.
Thanks all. Look what you've gone and started now... !!!
One happy newbie stepping out into a brave new world...
---edit---
please delete this post
have fun with your spv
I have a problem, and the more I search the forums, the more I worry it may be due to an upgraded Rom.
The original owner of the spv m700 I just bought has by the looks of it debranded it and installed WM 6.1:
Device name: HTC_P3600i
Model NO: TRIN100
Windows Mobile 6.1 Professional
ROM version 3.03.751.5
ROM Date: 04/01/08
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
With Tomtom 6 installed and seemingly working, the GPS receiver is not being detected. I have done what the forums say, i.e. selected "NMEA GPC receiver", get a screen with:
COM3: GPS in COM9
COM7: RIL on COM6:
S2410 IRDA
I have clicked on the first option (COM 9 is recommended), but still no GPS device found, indoors or out, after 10 minutes of trying
Like I say, much info says the above should solve it, but others say an upgrade can knock out the GPS and it needs to have a different ROM reinstalled. Never done this before, and there may be an easier solution?
Help anyone.... please.......?!
I'm not 100% sure but I think your radio rom needs upgrading to support GPS - I'm sure the one's that do have 11 at the end of them..
Really?? It would be great to finally reach a soultion!
Can someone verify if this is true and if so, what do I have to do??
Thanks.
Hi Monkey Boy and all.
I think I'm in a similar situation that you were...
The original owner of my new spv m700 debranded it, unlocked it (by flashing an old radio ROM) installed WM 6.1. I now fear that the reason tomtom detests no GPS device is because the radio may need updating too... (see below for the spec on my phone at the moment).
Have you discovered which is the best radio to update to?
Device name: HTC_P3600i
Model NO: TRIN100
Windows Mobile 6.1 Professional
ROM version 3.03.751.5
ROM Date: 04/01/08
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
All advice and recommendations welcomed. I have never flashed anthing before so this is all new to me, but I like to think I learn fast...
Thanks,
Matt
http://forum.xda-developers.com/showthread.php?t=293957
Original owner would have done this to unlock it, so all you have to do is search for the latest radio rom and flash that to your phone - there are guides how to do this in here..
Radio ROM
http://forum.xda-developers.com/showthread.php?t=325197&highlight=radio+flashing
Guides
http://trinityguides.info/index.php?option=com_content&task=category§ionid=4&id=31&Itemid=66
Hey Trixter.
Thanks for the reply.
I managed to get in touch with the original owner and he sent me a link to an an .exe file which I downloaded, ran whilst activesynced to my phone, and voila! I now have radio ROM 1.50.08.11. Tomtom 6.03 now successfully works using settings "other NMEA GPS receiver" with "GPS baud rate 115200" and "GPS in Com9"!
I'm a novice and bought the phone as a "pimped up" spv m700. But I'm learning loads since joining thanks to people like your good self answering posts, so thanks.
Matt
Thanks to seeing your signature I'm sorted! If you read anyone else with the same problem, I hope my experience helps them.
Thanks again for your time,
Matt.
Please could someone help me out with upgrading my O2 XDA Orbit?
I've had the device from new for just over a year but I've never been able to update it via the "Windows Update" function within settings/system, I'm currently running ROM version: 3.4.206.2.WWE dated 18/4/07 and Windows version CE OS 5.2.1238 (Build 17745.0.2.3).
Ideally I’d like to “safely & reliably” upgrade it to WM6.1 but if that’s not possible then the latest version of WM6 with as many bugs fixed as possible, an idiots guide would also be appreciated!
I apologise but I’m on a really bad connection at the moment and it’s taking forever to navigate from one page to another, if this information is already available please point me in the right direction.
Many thanks
SGL
Instruction
1. Remove your MicroSD Card
2. Download this: http://forum.xda-developers.com/attachment.php?attachmentid=41246&d=1181558635
Manual for this: http://forum.xda-developers.com/attachment.php?attachmentid=41247&d=1181558782
3. Start start_uspl.exe you must have a connection via Active Sync
4. Now you are able to Install any Artemis-ROM from this Forum
As far as I know USPL (2.) only works with Windows XP
Excellent, thank you for this.
Are there any recommended ROM's?
http://forum.xda-developers.com/showthread.php?t=462852
it's your own decision. There are also a lot of good Manila 2d ROMs, which looks like this
http://www.youtube.com/watch?v=vGACjp0Adcg&feature=related
I actually have [wwe][5 Dec 08][wm 6.1_sheen_no_nonsense](clean) with SPB Mobile Shell
Please don't asked where to find these ROMs, use the search button
Thank you very much for this.