Need help ASAP!!! - EVO 4G Q&A, Help & Troubleshooting

Ok, I'm having some serious effin' problems. I was running MIUI 1.1.28 and earlier I was having issues with device not syncing, but got that taken care of with a full wipe and fresh install. Then, after that my Google accounts wouldn't sync...WTF! I just ended up saying "F*ck it" and booted into recovery so I could restore my MIUI 1.14 backup. I used Calkulin's format all zip first ...
Now....my Evo is f*cking bricked! All system data has been wiped (no ROM installed) so I'm stuck in Bootloader or recovery and Nandroid backup refuses to restore anything. I keep getting "Error: run 'nandroid-mobile.sh restore' via adb!"
I tried:
Code:
adb shell
mount /sdcard
cd /sdcard
cd nandroid
ls
cd HT**********
ls
cd BCD***-********-****
nandroid-mobile.sh restore
...but my Evo has less than 30% power.
HELP!!!

Have you tried flashing a different rom?

sminker said:
Have you tried flashing a different rom?
Click to expand...
Click to collapse
I tried putting a ROM on SD card, then flashing, but recovery isn't reading it for some reason.....maybe I'll try re-mounting SDCard via recovery and see if that works...

Charge your battery for a couple of hours and try again.

12MaNy said:
I tried putting a ROM on SD card, then flashing, but recovery isn't reading it for some reason.....maybe I'll try mounting SDCard via recovery and see if that works...
Click to expand...
Click to collapse
Thought it always had to be mounted for it to read off of it

DirtyShroomz said:
Thought it always had to be mounted for it to read off of it
Click to expand...
Click to collapse
I would recharge for a while then take your SD card out then put it back in. Had to do that to mine one time when I couldn't get it to mount in recovery.

DirtyShroomz said:
Thought it always had to be mounted for it to read off of it
Click to expand...
Click to collapse
Re-mount is what I meant...
sminker said:
I would recharge for a while then take your SD card out then put it back in. Had to do that to mine one time when I couldn't get it to mount in recovery.
Click to expand...
Click to collapse
I'll try that and report back...thanks.

12MaNy said:
Re-mount is what I meant...
I'll try that and report back...thanks.
Click to expand...
Click to collapse
I had this happen once to fix it I mounted to my pc copied everything over to a folder then un-mounted and reformatted the sd card then copied everything back and then all was good.

Ok, I did finally get my device to charge and I restored backup via adb shell. I think my recovery image must have become corrupted somehow. Weird...
Thanks again EndlessDissent.

xxwckdxx said:
I had this happen once to fix it I mounted to my pc copied everything over to a folder then un-mounted and reformatted the sd card then copied everything back and then all was good.
Click to expand...
Click to collapse
Man....I'm glad I didn't have to do all that ^. Lol

12MaNy said:
Ok, I did finally get my device to charge and I restored backup via adb shell. I think my recovery image must have become corrupted somehow. Weird...
Thanks again EndlessDissent.
Click to expand...
Click to collapse
Don't worry, the only reason I suggested that was because I've gotten scared ****less by the same thing before!

matt2053 said:
Don't worry, the only reason I suggested that was because I've gotten scared ****less by the same thing before!
Click to expand...
Click to collapse
Ooops! I also meant to say thanks to you too bro.

Related

[Q] nandroid :/

wont let me restore any of my backups keeps saying error: run 'nandroid-mobile.sh restore' via adb! what do i do?
Upgrading to newest amon_ra recovery worked for me.
Swyped with my Evo 4g running CM6
i am on the most recent amon ra already, havent renamed any of them, and i have plenty of room on my sdcard any other ways to fix this?
kindakrazy said:
wont let me restore any of my backups keeps saying error: run 'nandroid-mobile.sh restore' via adb! what do i do?
Click to expand...
Click to collapse
It took me days and days researching this...lol. I found three possible issues...the first, and most common, is renaming your backups. Apparently that screws it all up, so don't rename them. Second, your battery is too low...it has to be at least 40%. I never renamed and I was fully charged - but still got the error, and when I tried to restore via adb I got an sd card error. In MY case, I had gotten a new 16gb sdcard and it wasn't formatted or partitioned properly...I had to copy everything off if it onto a folder on my PC, format it (FAT32) via PC, put it back into the Evo, reboot into Amon Ra recovery via Rom Manager, select "partition sd card" - let that work- then select SD:ext2 to ext3...wait till that was done, reboot. Then I mounted as disk drive to the PC, copied everything back to the sd card, and viola...it finally worked. I don't know why it did it, I had 2 of the exact sd cards...brand, class, etc. Hopefully that works for you!
ahhhh the battery explain it hahaha
kindakrazy said:
ahhhh the battery explain it hahaha
Click to expand...
Click to collapse
Lol...good! Cause that whole formatting thing sucked.

[Q] Is it Bricked?

Well, last night, after doing a complete wipe, INCLUDING the /system partition, my sd card would not eject properly. (Using Lion OSX 10.7.1)
So, I manually ejected it; when I tried to reboot the phone, it wouldn't boot.
To make a long story short, basically, in CWM, when I tried to flash anything, or recover my backup, I keep getting the "E": SD Card not recognized, won't mount" error, no matter what I do.
I tried to format my card, I tried a different card, but no matter what, my phone won't recognize my sd card. Also, it used to give me the option of flashing from my "internal" sd card, but that option does NOT show up in the CWM menu anymore, Probably because I formatted my system partition..
I had formatted the system partition a few times before, when I had fc's after trying a different theme or rom, but, I was always able to get back into recovery, and flash something that fixed it.
Is there anything else I can do at this point? My phone isn't "seen" by my computer anymore, so I can't get anything on to it directly, and it won't recognize my sd card, no matter what I do..
Thanks for any help or ideas you can offer
use odin to flash back to stockhttp://forum.xda-developers.com/showthread.php?t=1282420
thanks for the suggestion, but I'm on mac OSX Lion; Odin won't work on it
Try this on your Mac http://forum.xda-developers.com/showthread.php?t=1277000
sk63 said:
Try this on your Mac http://forum.xda-developers.com/showthread.php?t=1277000
Click to expand...
Click to collapse
Thanks, but all that does is root the phone and install a rooted kernel..not a rom which is what is needed to boot the phone, and its already rooted
looks like its time to get a PC..
I just had the same SD error in CWM, ODIN'd a fresh CWM 5023 and back to working again! I was worried it was going to be a serious issue (had similar problems with a Vibrant that rubbed me the wrong way) But it was an easy fix
fortunately, the good folks at Best Buy had no problem swapping my phone for me..
Thanks for your suggestions, and be careful when you wipe your /system partition!
wase4711 said:
Thanks, but all that does is root the phone and install a rooted kernel..not a rom which is what is needed to boot the phone, and its already rooted
Click to expand...
Click to collapse
Not true. Heimdall does the samething as odin does. I use heimdall instead of odin most of he time. Its better.
Sent From My Evo Killer!!!
Interesting; do you need the GUI front end, or do you do everything through command line?
Fortunately, I got a new phone from Best buy today, so my immediate issue is fixed; I was just wondering about using it sort of like ADB to push stuff through via a mac..

[Q] Crashing and freezing?!

Hi guys , its me again ... well i have a big problem.I recently owned a Kindle fire ,but i gave it to my brother who went away for a while . He came back with the divice telling me that the hard drive had crashed. I thought it was not a big problem so i tried to fix it. I turned it on and saw the blue kindle fire letters (because it's rooted) and then afterwards it said boot and then the screen would just go blank. I thought it was a bit strange so i went into recovery and everything was gone so i thought that maybe he had wiped everything from the SD card , system , cashe and dalvik cache except TWRP , so i mounted the device to my computer , copied the jandycane ROM for jellybean 4.1.1 for KF and the gapps onto the kindle fire , i then unmounted and tried to flash it but it would give me an error. My brother claims he didn't make it fall or anything and he is studying medicine so he really needs it because he doesn't want to carry his laptop around. Please help me , both me and my brother are in great need.
Thanks in advance.
The kf like most tablets/phones does not have a hard drive, it uses flash drive memory like sd cards. I seriously doubt that it could have gone bad, however it could be an issue with the partitioning of the drive. What exactly are the errors you get when trying to flash a Rom?
Sent from my Amazon Kindle Fire using xda app-developers app
jlshady00 said:
The kf like most tablets/phones does not have a hard drive, it uses flash drive memory like sd cards. I seriously doubt that it could have gone bad, however it could be an issue with the partitioning of the drive. What exactly are the errors you get when trying to flash a Rom?
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
well i just started it again to go into recovery menue and i forgot to mention something , it freezes up sometimes , especially when i was transfering files to it but i got them over sucesfully... ww now it isn't even booting into recovery mode!Somebody help me!!!! :crying:
FIxed it ... now im in recovery mode and i get
* Verifying filesystems...
* Verifying partion sizes ...
E:Unable to open zip file.
Error flashing zip '/sdcard/jandycane_otter-1.8.0_0xD34D.zip
Dark__king said:
FIxed it ... now im in recovery mode and i get
* Verifying filesystems...
* Verifying partion sizes ...
E:Unable to open zip file.
Error flashing zip '/sdcard/jandycane_otter-1.8.0_0xD34D.zip
Click to expand...
Click to collapse
Maybe your file transfer hiccupped. You could wipe the device and push it again then retry your flash.
Sent from my original Kindle Fire masquerading as a Galaxy Nexus
sharonbw said:
Maybe your file transfer hiccupped. You could wipe the device and push it again then retry your flash.
Sent from my original Kindle Fire masquerading as a Galaxy Nexus
Click to expand...
Click to collapse
I can't wipe it becuase TWRP in on my SD
Wipe system, factory reset, wipe cache and dalvik cache then transfer the .zip ball over and flash it again just to make sure. You won't lose folks stored on the sd as long as you don't wipe sd which you don't need to do.
Sent from my Amazon Kindle Fire using xda app-developers app
Dark__king said:
I can't wipe it becuase TWRP in on my SD
Click to expand...
Click to collapse
Typos aside...that doesn't make any sense.
Dark__king said:
FIxed it ... now im in recovery mode and i get
* Verifying filesystems...
* Verifying partion sizes ...
E:Unable to open zip file.
Error flashing zip '/sdcard/jandycane_otter-1.8.0_0xD34D.zip
Click to expand...
Click to collapse
You obviously have recovery installed, and I'm pretty sure it isn't installed to the sdcard partition.
soupmagnet said:
Typos aside...that doesn't make any sense.
You obviously have recovery installed, and I'm pretty sure it isn't installed to the sdcard partition.
Click to expand...
Click to collapse
TWRP is on my SD card i see it when i usb mount my sd card to my pc. Also even after wiping everything except Sd card it still wont flash the zip
Is the TWRP on your sdcard a TWRP folder or is the TWRP you are speaking of the recovery.img?
Also, what version of TWRP are you running?
Make sure zip file verification and md5 check are disabled when you flash it. If you still have issues place another rom.zip and gapps.zip on your sdcard then flash it.
soupmagnet said:
Is the TWRP on your sdcard a TWRP folder or is the TWRP you are speaking of the recovery.img?
Also, what version of TWRP are you running?
Click to expand...
Click to collapse
The folder is on the SD card and it's version 2.3
Dark__king said:
The folder is on the SD card and it's version 2.3
Click to expand...
Click to collapse
Okay, that's just the backups/themes folder. TWRP is actually installed to it's own partition, separate from the sdcard. Not that it matters because your problem seems to be that you're using TWRP 2.3 rather than 2.2
Not to say that's the only problem you're having, but it's a good place to start.
Well i think i updated to TWRP 2.3 but i need to check so im not sure :\
its sticking at the TWRP screen x_x any help on this?
Dark__king said:
Well i think i updated to TWRP 2.3 but i need to check so im not sure :\
Click to expand...
Click to collapse
Dark__king said:
its sticking at the TWRP screen x_x any help on this?
Click to expand...
Click to collapse
Okay i'm i (after alot of freezing) it's version 2.2.2.1 not 2.3, sorry
What other ROMs have you tried to install.

Horrible Horrible Mistake

So Jelly Bean 4.2 came out and I was curious so in class today I downloaded http://forum.xda-developers.com/showthread.php?t=1737849
correct me if I'm wrong but that's the correct ROM I should download for the GSM/HSPDA Gnex. Anyways it successfully downloads and I attempt to flash it and when I did it got stuck on the Google screen. So what I did is battery reset and flash my original JB rom I still had on the memory and re-downloaded JB 4.2 thinking it might have been a corrupted download. This time around it actually gets to booting but it bugs up on the lock screen and is on a boot loop. So what I did now is completely cleared everything from CWM, the cache, partition, dalvik, and I even formatted everything as well. Not knowing what I was doing I guess the formatting formatted my SD card so it cleared everything. I said OK, CWM has a USB mounting system I'll just hook up to my PC and put in a rom and flash it. But the problem is it's not detecting my phone, I press mount SD Card and nothing shows up on my computer. I'm confident I have the drivers installed, what else could be the problem?
tl;dr CWM mounting doesn't work with PC and I can't boot into my ROM.
Moe747 said:
So Jelly Bean 4.2 came out and I was curious so in class today I downloaded http://forum.xda-developers.com/showthread.php?t=1737849
correct me if I'm wrong but that's the correct ROM I should download for the GSM/HSPDA Gnex. Anyways it successfully downloads and I attempt to flash it and when I did it got stuck on the Google screen. So what I did is battery reset and flash my original JB rom I still had on the memory and re-downloaded JB 4.2 thinking it might have been a corrupted download. This time around it actually gets to booting but it bugs up on the lock screen and is on a boot loop. So what I did now is completely cleared everything from CWM, the cache, partition, dalvik, and I even formatted everything as well. Not knowing what I was doing I guess the formatting formatted my SD card so it cleared everything. I said OK, CWM has a USB mounting system I'll just hook up to my PC and put in a rom and flash it. But the problem is it's not detecting my phone, I press mount SD Card and nothing shows up on my computer. I'm confident I have the drivers installed, what else could be the problem?
tl;dr CWM mounting doesn't work with PC and I can't boot into my ROM.
Click to expand...
Click to collapse
man is simple to repair it !go in fastboot mode connect to your pc and open gnex toolkit reflash 4.1.2 and thats all
Ouch... You have two choices. You can Adb push xxx /sdcard or fastboot the device... I dont think mounting works in CWR on the Gnex
altimax98 said:
Ouch... You have two choices. You can Adb push xxx /sdcard or fastboot the device... I dont think mounting works in CWR on the Gnex
Click to expand...
Click to collapse
This is exactly right. Mounting does not give you usb mounting but makes the partition accessible from adb.
Sent from my Galaxy Nexus using xda app-developers app
altimax98 said:
Ouch... You have two choices. You can Adb push xxx /sdcard or fastboot the device... I dont think mounting works in CWR on the Gnex
Click to expand...
Click to collapse
It doesn't. No need for fastboot, reboot to recovery, adb push file name.file-extension /data/media/.
http://forum.xda-developers.com/showthread.php?t=1812959
Sent from my i9250
Fixed it, flashed the phone to stock with tool kit then start everything over from scratch. Didn't take to long actually.
lol
10chars

[Q] [Help] Android & Windows don't pick up sd

So today instead of formatting to fat32 i accidently formatted to ntfs and yes iv'e searched all over but all the apps say i need "modprobe fuse" and the incredible doesn't seem to have it :/
I really don't wanna move to my iphone so any help would be nice, thanks in advance
Danielombasa612 said:
So today instead of formatting to fat32 i accidently formatted to ntfs and yes iv'e searched all over but all the apps say i need "modprobe fuse" and the incredible doesn't seem to have it :/
I really don't wanna move to my iphone so any help would be nice, thanks in advance
Click to expand...
Click to collapse
Cant you just take out the sd and use a card reader and a pc to format it back to fat32?
cmlusco said:
Cant you just take out the sd and use a card reader and a pc to format it back to fat32?
Click to expand...
Click to collapse
the problem is i don't have one, oh well i think it's time to retire this phone :/
thanks cmlusco
Danielombasa612 said:
the problem is i don't have one, oh well i think it's time to retire this phone :/
thanks cmlusco
Click to expand...
Click to collapse
Well its up to you. You can get one of those adapters at walmart for like $3.
Danielombasa612 said:
the problem is i don't have one, oh well i think it's time to retire this phone :/
thanks cmlusco
Click to expand...
Click to collapse
Or learn some adb and format in recovery. I hate to see a phone given up on due to an issue reading a sdcard.
Also android has a format option in the storage menu. Have you tried that?
Sent from my Galaxy Nexus using Tapatalk 2
tiny4579 said:
Or learn some adb and format in recovery. I hate to see a phone given up on due to an issue reading a sdcard.
Also android has a format option in the storage menu. Have you tried that?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
i booted to cwm, couldn't format because the phone doesn't recognize it.
tired it from cm10.1 storage, no luck so idk anymore.
Try this:
1. Reboot into recovery.
2. Connect phone to PC (must have working adb)
3. Start->Run->cmd
4. Type adb shell where you normally would run adb.
5. mkdosfs -F 32 /dev/block/mmcblk1p1
Or simpler, did you try wiping external storage (in TWRP recovery) or a similar sdcard wipe in CWM?
tiny4579 said:
Try this:
1. Reboot into recovery.
2. Connect phone to PC (must have working adb)
3. Start->Run->cmd
4. Type adb shell where you normally would run adb.
5. mkdosfs -F 32 /dev/block/mmcblk1p1
Or simpler, did you try wiping external storage (in TWRP recovery) or a similar sdcard wipe in CWM?
Click to expand...
Click to collapse
adb keeps giving me "error device not found"
& i had cwm installed because i had to flash an unsigned zip T.T
ty anyways for your help guys!
p.s i've always loved your ROM's & kernels keep it up dude ^^
Danielombasa612 said:
adb keeps giving me "error device not found"
& i had cwm installed because i had to flash an unsigned zip T.T
ty anyways for your help guys!
p.s i've always loved your ROM's & kernels keep it up dude ^^
Click to expand...
Click to collapse
Do the commands in a terminal emulator app.
su
mkdosfs -F 32 /dev/block/mmcblk1p1
cmlusco said:
Do the commands in a terminal emulator app.
su
mkdosfs -F 32 /dev/block/mmcblk1p1
Click to expand...
Click to collapse
mkdosfs -F 32 /dev/block/mmcblk1p1: not found
thats what it says

Categories

Resources