Develop Bugs

Am I the only one who has touch-screen problems with the vogue on/off? Seriously..

I had one before, dropped it a few times.. I wrote it off as that being why, well I just got a replacement one sent.. haven't dropped it once, it's been here only about 2 weeks
Randomly sometimes it won't respond to almost anything.. I'll be trying to slide the screen, it either won't at all or will go halfway like I barely touched it. I'll try clicking on things, programs, start, whatever... it'll not respond at all, I end up having to press with way more pressure than I should have to, way more.
Then sometimes without even a reset it'll start working just about normally again.. but that's rarely, usually I'll soft reset or pull the battery for a second and then it'll be fine.. for days even.. then I'll run into it again..
I noticed 2-3 times it was because I had **** updating at the time (motweets) or was receiving email.. but I've since made everything manual regarding email, and motweets updates once every 15 minutes and the amount of tweets is limited so it's not a lot..
Still, I run into this problem, and I've made sure it wasn't a program updating but I can't think of what else would make this happen, am I the only one??
Is it because there's a way to clear cache on internets and other programs and I have no idea how? (I fully close them, that's not the problem, I know my Vogue I just can't figure this out an it seems nobody else has this problem).. Not to mention I have my internet cache's directed to my storage card so as to keep my phone memory as free'd up as possible
If anyone can help..

mine is unresponsive sometimes and i have to tap on the back of the phone to get to work again. i thinks its going out soon

That's what I thought about my old one, I figured I had dropped it to much.. because I did lol but now I got a new one 2 weeks old and I'm running into the SAME problems.. I'm assuming I must be doing something wrong with how I've got **** set-up

j18yo said:
I had one before, dropped it a few times.. I wrote it off as that being why, well I just got a replacement one sent.. haven't dropped it once, it's been here only about 2 weeks
Randomly sometimes it won't respond to almost anything.. I'll be trying to slide the screen, it either won't at all or will go halfway like I barely touched it. I'll try clicking on things, programs, start, whatever... it'll not respond at all, I end up having to press with way more pressure than I should have to, way more.
Then sometimes without even a reset it'll start working just about normally again.. but that's rarely, usually I'll soft reset or pull the battery for a second and then it'll be fine.. for days even.. then I'll run into it again..
I noticed 2-3 times it was because I had **** updating at the time (motweets) or was receiving email.. but I've since made everything manual regarding email, and motweets updates once every 15 minutes and the amount of tweets is limited so it's not a lot..
Still, I run into this problem, and I've made sure it wasn't a program updating but I can't think of what else would make this happen, am I the only one??
Is it because there's a way to clear cache on internets and other programs and I have no idea how? (I fully close them, that's not the problem, I know my Vogue I just can't figure this out an it seems nobody else has this problem).. Not to mention I have my internet cache's directed to my storage card so as to keep my phone memory as free'd up as possible
If anyone can help..
Click to expand...
Click to collapse
j18yo i think that your problem might be that to many programs run when you start your vogue that happened to me before and i hated it but then i heard of a program named "Space Reclaimer" FREE and it made my vogue much more responsive because the program stops any programs that start when you turn on your vogue or any windows mobile phone

I have the same problem usually under the same conditions. Mostly happens in the morning after the device has been off. Works fine for a few seconds then stops responding correctly i.e., the D-Pad stops scrolling correctly with a lag on touch response. I use CleanRAM and it still doesn't fix the prob once it occurs. Sometimes when I run CleanRAM it will occur. I've tried putting biotouch.exe and everyting BUT the kernel processes in the exceptions list and a Level 1 clean. Hard reset yesterday and haven't had the problem yet. If it continues to work, I'll post my settings.
BTW, I'm on a stock 6.1 ROM with a few apps.

j18yo said:
I had one before, dropped it a few times.. I wrote it off as that being why, well I just got a replacement one sent.. haven't dropped it once, it's been here only about 2 weeks
Randomly sometimes it won't respond to almost anything.. I'll be trying to slide the screen, it either won't at all or will go halfway like I barely touched it. I'll try clicking on things, programs, start, whatever... it'll not respond at all, I end up having to press with way more pressure than I should have to, way more.
Then sometimes without even a reset it'll start working just about normally again.. but that's rarely, usually I'll soft reset or pull the battery for a second and then it'll be fine.. for days even.. then I'll run into it again..
I noticed 2-3 times it was because I had **** updating at the time (motweets) or was receiving email.. but I've since made everything manual regarding email, and motweets updates once every 15 minutes and the amount of tweets is limited so it's not a lot..
Still, I run into this problem, and I've made sure it wasn't a program updating but I can't think of what else would make this happen, am I the only one??
Is it because there's a way to clear cache on internets and other programs and I have no idea how? (I fully close them, that's not the problem, I know my Vogue I just can't figure this out an it seems nobody else has this problem).. Not to mention I have my internet cache's directed to my storage card so as to keep my phone memory as free'd up as possible
If anyone can help..
Click to expand...
Click to collapse
What ROM are you running? I asume that wehn your new device came you loaded it the same as the old one. It has to be something with the ROM you are runnning or a problem with a program causing your issue.

My phone would do this periodically too, with Vin's latest ROMs. I turned off Manila and am running Titanium now. Interestingly - no lags when unlocking since. I'll keep Titanium on for some time to see if that makes it go away. I had an issue with both his current v2 and v4 (which I am running now).

Ive had to replace my screen twice and the whole phone once because of touch screen problems. Thank God for the insurance.

Ah yes... to what OP mentioned:
I do not beleive it is a more pressure thing. I do not think it is more pressure that is required but rather that the phone is non responsive. If you are unlocking and typing a PIN, it takes the PIN and all but it takes perhaps one digit every 5 seconds. That's my experience anyway. So it is just slower, as if something was consuming the CPU and UI is not responsive.

crazylegs91 said:
I have the same problem usually under the same conditions. Mostly happens in the morning after the device has been off. Works fine for a few seconds then stops responding correctly i.e., the D-Pad stops scrolling correctly with a lag on touch response. I use CleanRAM and it still doesn't fix the prob once it occurs. Sometimes when I run CleanRAM it will occur. I've tried putting biotouch.exe and everyting BUT the kernel processes in the exceptions list and a Level 1 clean. Hard reset yesterday and haven't had the problem yet. If it continues to work, I'll post my settings.
BTW, I'm on a stock 6.1 ROM with a few apps.
Click to expand...
Click to collapse
THIS..
It has to be the problem.. I have CleanRAM run every 12 hours or 6 hours because I figured it would help.. lol but now your saying sometimes it happens WHEN you run cleanRAM.. Im assuming it does something, or erases something it shouldnt?
This is like the 1 sole thing I have run on a schedule, I've turned off my email and everything to manual, I went into my startup folder and there was about 4-5 things I didn't need which made the battery 100% better than it was in terms of how long it lasts.. and I set-up this CleanRAM schedule on my last phone I THINK I forgot but I do know as soon as I got this 1 going I did it and I'm bout to delete the program completely and see if it'll help, I have speedbooster too which does a cleanup too I'm curious if it would have the same result..
I'll let everyone know if this ended up being my problem incase anyones in the exact same boat with the same apps
PS: I was doing level 3 cleans

j18yo said:
THIS..
It has to be the problem.. I have CleanRAM run every 12 hours or 6 hours because I figured it would help.. lol but now your saying sometimes it happens WHEN you run cleanRAM.. Im assuming it does something, or erases something it shouldnt?
This is like the 1 sole thing I have run on a schedule, I've turned off my email and everything to manual, I went into my startup folder and there was about 4-5 things I didn't need which made the battery 100% better than it was in terms of how long it lasts.. and I set-up this CleanRAM schedule on my last phone I THINK I forgot but I do know as soon as I got this 1 going I did it and I'm bout to delete the program completely and see if it'll help, I have speedbooster too which does a cleanup too I'm curious if it would have the same result..
I'll let everyone know if this ended up being my problem incase anyones in the exact same boat with the same apps
PS: I was doing level 3 cleans
Click to expand...
Click to collapse
Update: I don't think CR erases things as much as it kills processes that won't restart. Thru trial and error, I've adjusted my CleanRAM settings to where I haven't had the problem for a couple of days. I'm able to do a Level 3 cleans on a once a night schedule and during the day if need be. In settings, I have it to close all apps, launch startup progs, and display today screen. I have no exceptions listed for either running progs or startup progs. I have the most up to date version from the OTA update in the program.
The program links in my StartUp folder are: poutlook (original on ROM), sddaemon (original on ROM), WLMUpdate (original on ROM), Glossybars.exe (I added this), biotouch.exe (I added as I thought CR killing this was the source of the problem), pocketwit.exe (I added), and SIPChange (I added).
One thing I did do was delete the link for TouchPal from the Startup folder. I did this for other reasons (I use FingerKeyBoard). Not sure if this was part of the problem.
I can scroll with d-pad and no touch lag.
On a side note, can I delete any of poutlook, sddaemon, or WLMUpdate from the startup folder to save battery power?
I'm probably just a bit above a newb so sorry if I don't make sense.
Update: Just for kicks, I deleted the links for glossybars.exe and pocketwit.exe from my StartUp and it started locking again after running CleanRAM. I put them back in and it works again even after running CleanRAM. Maybe someone with more knowledge can explain this. I'm just keeping it the way it is now...

Hmm weird that you removed something not very important like pocketwit an cleanram caused problems again.. someone has to have some info on this??
I deleted everything from my StartUp folder but my SPB Mobile Shell.. I didn't have sddaemon, but I did have poutlook and WLMUpdate both of which I deleted.. then I had some other programs that aren't necessary for the phone.. I have no problems on restart or anything, and the % showed being used is stays around the 30's now instead of 40s/50s.. and when I run programs it usually reachs 50% tops now instead of 60/70% I used to get.
PS: Pocketwit isnt bad I used to praise the program but now I've tried MoTweets and.. I can't think of the other one now.. ****.. it's really good though but it seems to use a lot more phone power than MoTweets so I went back to that.
Pocketwit kept giving me problems, started saying I need to install that NET 3.5 or whatever but when I try to it says I have a later version already so it won't install, then other times it'll work completely fine.. but MoTweets I like better anyways

Ok, I give up. I restored everything to the way I had it when it was working and now I'm having problems again. After the screen turns off and I turn it back on, it locks up and won't scroll and has the touch lag issue.
Hope someone figures this out. Shouldn't have messed with success. Good luck.

crazylegs91 said:
Ok, I give up. I restored everything to the way I had it when it was working and now I'm having problems again. After the screen turns off and I turn it back on, it locks up and won't scroll and has the touch lag issue.
Hope someone figures this out. Shouldn't have messed with success. Good luck.
Click to expand...
Click to collapse
Are you running TouchFLO?
As mentioned before -for me, turning off TouchFLO (and running Titanium) fixed this 100%...

bigboy292000 said:
Are you running TouchFLO?
As mentioned before -for me, turning off TouchFLO (and running Titanium) fixed this 100%...
Click to expand...
Click to collapse
I'm running a stock Sprint 6.1 ROM. Thanks though.

bigboy292000 said:
Are you running TouchFLO?
As mentioned before -for me, turning off TouchFLO (and running Titanium) fixed this 100%...
Click to expand...
Click to collapse
I'm not using the TouchFLO interface, does that mean its still on though?
I'm not completely up on understanding all this

This was happening with Vin's Rom for me as well. I was tripping out pressing ON so many times with no screen showing up but phone light on! I believe it could be the power settings. I disabled the "Turn off device" which I believe was mentioned in his notes about the rom.

I gave up on this problem for a while but found something when researching how to disable to cube. I used the registry edit in this thread to disable to cube post #69. I didn't do any of the other steps because I'm not having memory probs (42% with pocketwit in the bckgrd).
http://forum.xda-developers.com/showthread.php?t=368269&page=7
I noticed that biotouch.exe never shows up in the running processes menu in CleanRAM and I don't have the "lock/freeze" scrolling problem any longer and I can run CleanRam without the problem occurring. I can press any item on the screen as well with no delayed response.
However, this stops you from being able to finger scroll and do the "side to side" scroll in Messaging. I never really finger scrolled and prefer using the d-pad for scrolling so losing that functionality isn't a big deal to me.
If anyone can figure out how to keep this working so smooth and have the option to finger scroll, I'd be much obliged. It just seems that biotouch.exe craps out sometimes and locks up the d-pad. If they could both work equally well....

Most functional Android rom

I just flashed my Kaiser with Fat Free Froyo RLS5. I really like the Android OS, but the lack of functionality is bothersome. I can't type into the Google search bar that is on the desktop, the camera doesn't work and, worst of all, the USB to PC data connection is inoperable. These things along with some other minor things like the fact that I can't change the volume of the alarm clock make me want to try a different flavor. I've only been using it for about an hour and already found all these problems so I can image that there are more.
All I am looking for it a version of Android that will allow me to use the camera, browse my SD card from my PC, and has a working WiFi. Speed is also a concern.
If I could get some suggestions I would be appreciative.
Thank you.

lemminman said:
I just flashed my Kaiser with Fat Free Froyo RLS5. I really like the Android OS, but the lack of functionality is bothersome. I can't type into the Google search bar that is on the desktop, the camera doesn't work and, worst of all, the USB to PC data connection is inoperable. These things along with some other minor things like the fact that I can't change the volume of the alarm clock make me want to try a different flavor. I've only been using it for about an hour and already found all these problems so I can image that there are more.
All I am looking for it a version of Android that will allow me to use the camera, browse my SD card from my PC, and has a working WiFi. Speed is also a concern.
If I could get some suggestions I would be appreciative.
Thank you.
Click to expand...
Click to collapse
Camera not working is related to your kernel/radio rom. Also you could use not so super froyo if you want the same with more features. If you want more speed I suggest a Cyanogen based rom as these are the fastest currently. I suggest changing your kernel to l1qu1ds latest .32 kernel via the thread that is stickied at the top.
USB to pc is not working through my computer right now but adb is at least. What I do for data transfer is just use System on NAND and Data on SD and use a card reader for the data.
Lastly, remember that android on the Kaiser is by no means perfect and is still more or less of a thing to be like "Look what my old phone can do!" thing. If you want everything perfect then Windows mobile has that already. Otherwise if you want a cooler newer OS on your phone then its going to take a little time for us. We have come a long ways but not all the way there yet.

lemminman said:
I just flashed my Kaiser with Fat Free Froyo RLS5. I really like the Android OS, but the lack of functionality is bothersome. I can't type into the Google search bar that is on the desktop, the camera doesn't work and, worst of all, the USB to PC data connection is inoperable. These things along with some other minor things like the fact that I can't change the volume of the alarm clock make me want to try a different flavor. I've only been using it for about an hour and already found all these problems so I can image that there are more.
All I am looking for it a version of Android that will allow me to use the camera, browse my SD card from my PC, and has a working WiFi. Speed is also a concern.
If I could get some suggestions I would be appreciative.
Thank you.
Click to expand...
Click to collapse
the search bar will work if you download google search from the market, it was removed since it can be installed from the market, fat free is fully functional you just have to work to get it going out of the gate, now in contrast not so super froyo is ready to go from the get go

lemminman said:
the camera doesn't work and, worst of all, the USB to PC data connection is inoperable. These things along with some other minor things like the fact that I can't change the volume of the alarm clock make me want to try a different flavor.
Click to expand...
Click to collapse
I am using Fat Free Froyo RLS5 and all that stuff works for me.
USB to PC works perfectly in linux It works for me on windows 7 too, but you just have to wait a long time (maybe 2-5 mins) for the computer to recognise it.
To change the alarm volume just roll the jog wheel while in that menu (or press whatever buttons you have assigned to volume up/down)

Thanks for the help, guys.
I suggest changing your kernel to l1qu1ds latest .32 kernel via the thread that is stickied at the top
Click to expand...
Click to collapse
That is the kernel I have. My radio is version 1.65 something.
What I do for data transfer is just use System on NAND and Data on SD and use a card reader for the data.
Click to expand...
Click to collapse
I don't have a card reader; that is why this is important to me. Are there any Android versions that this works, or an app that I can install even?
Lastly, remember that android on the Kaiser is by no means perfect [...]
Click to expand...
Click to collapse
The only reason I don't want WMP is because it is ridiculously slow to respond. I had heard that Android was much faster so I am giving it a try.
the search bar will work if you download google search from the market
Click to expand...
Click to collapse
That part really isn't a big deal; I probably would never even use it. It was just one of the many small glitches I was noticing during normal use. Things like there being no way to bring the phone back from sleeping except the power button (not even opening it!). At one point, when it is just sitting on my desk, the screen turned white and the phone was completely unresponsive. I had to hard reset it. They keyboard works except when dialing a number where it seems completely random.
If there is a workaround to these things, I'm fine with doing some personalizing, but if not, I would like to know if there are flavors that don't have these kinds of issues.
I think I will try Cyanogen like you suggested and see if I like it any better.
Thanks again for the help.

lemminman said:
Thanks for the help, guys.
That is the kernel I have. My radio is version 1.65 something.
I don't have a card reader; that is why this is important to me. Are there any Android versions that this works, or an app that I can install even?
The only reason I don't want WMP is because it is ridiculously slow to respond. I had heard that Android was much faster so I am giving it a try.
That part really isn't a big deal; I probably would never even use it. It was just one of the many small glitches I was noticing during normal use. Things like there being no way to bring the phone back from sleeping except the power button (not even opening it!). At one point, when it is just sitting on my desk, the screen turned white and the phone was completely unresponsive. I had to hard reset it. They keyboard works except when dialing a number where it seems completely random.
If there is a workaround to these things, I'm fine with doing some personalizing, but if not, I would like to know if there are flavors that don't have these kinds of issues.
I think I will try Cyanogen like you suggested and see if I like it any better.
Thanks again for the help.
Click to expand...
Click to collapse
the white screen is a known issue apparently overclocking improves this

White screen is present when the system didn't draw the screen before it power up.
When you overclock the system is faster so it spend less time to draw the interface.
Sometimes you have with screen when the system sleep but it can't resume because the main app crashes.

To change the alarm volume just roll the jog wheel while in that menu
Click to expand...
Click to collapse
This changes "Ring volume" regardless of what I have opened.
Thanks for all the input, everyone.
I have tried four different Android builds now and I haven't gotten a USB data connection with any of them. I noticed that one of them had a Network option, as though I might be able to browse files of computers on the network which would solve my problem. Unfortunately, that particular build just says "Error" when I try to turn WiFi on.
Is there an android app I can install that will allow me to transfer files between my phone and a PC? That is really the number one priority right now. To test these Android builds I have been reverting back to WMP every time I want to try a different one because I need to put the androidinstall.tar onto my card. I tried loading a bunch of different ones on the card to avoid this, but I get "Permission denied" when I try to rename a file in the andboot folder.
Thanks again.

The forum search tool will answer all those questions I know I have answered it atleast 500000 times
Sent from my HERO200 using XDA App

I have a kaiser with froyo kernel 2.6.32 date 9.9.2010 I have overclocked with atools to 500 mhz and also overclocked the GPU, battery is standard setting. My radio is Neon 1.65.24.36 Together with thoughtlesskyle`s (thank you!!) fat free release 5, i have a very stable situation here. I have to admit i am not a heavy user. Merely phonecalls and sms (or whatsup) and sygic navigation software . I only have to reboot once a week. I am not sure why, maybe because i use cachemate once a while.
For connection between pc and kaiser i use SD Share Dual Mount. It works perfectly. I had flashed the latest kernel(s) of l1q1d because of the alleged stable reboots. I am sad that i did not have stable reboots, it got stuck and i had to reinstall my apk`s again. And most important for me, the SD Share did not work with the latest kernel(s), thats why i reverted back to the 9.9.2010 one.
As for the white screen, it only happens to me if my kaiser goes asleep and i awake it immediately. If i take some seconds between asleep and awakening, it`s okay.
I have to thank many people here to be able to use my kaiser like i bought it yesterday or so. Maybe someone can try my settings and profit from it, like i do.

Shayer said:
I have a kaiser with froyo kernel 2.6.32 date 9.9.2010 I have overclocked with atools to 500 mhz and also overclocked the GPU, battery is standard setting. My radio is Neon 1.65.24.36 Together with thoughtlesskyle`s (thank you!!) fat free release 5, i have a very stable situation here. I have to admit i am not a heavy user. Merely phonecalls and sms (or whatsup) and sygic navigation software . I only have to reboot once a week. I am not sure why, maybe because i use cachemate once a while.
For connection between pc and kaiser i use SD Share Dual Mount. It works perfectly. I had flashed the latest kernel(s) of l1q1d because of the alleged stable reboots. I am sad that i did not have stable reboots, it got stuck and i had to reinstall my apk`s again. And most important for me, the SD Share did not work with the latest kernel(s), thats why i reverted back to the 9.9.2010 one.
As for the white screen, it only happens to me if my kaiser goes asleep and i awake it immediately. If i take some seconds between asleep and awakening, it`s okay.
I have to thank many people here to be able to use my kaiser like i bought it yesterday or so. Maybe someone can try my settings and profit from it, like i do.
Click to expand...
Click to collapse
Well at least the white screen is being worked on, see the thread I made.

[Q] Trouble with all android software

Hello all, First, I searched the forums for my answer with no such luck, that being said if Im repeating a question thats been asked I apologize. I have a problem with keeping android stable. I have flashed with different versions of windows several times all with success. I do however, prefer the android system, I find that it runs much better, faster and has better perks. Everytime I flash following the original how to, I run in to a couple similar problems.
The first is when I hit the power (not hold the power) the back light cuts off and the keyguard enables, the screen goes dark all as it should. Depending on the time ( the longer it is the worse it is) when I hit the power key to revive my phone, I often get a white screen, then it waits , then it goes dim, Sometimes If I hit the power button several times it eventually comes back to the key guard option, but others I have to remove the battery and reboot. This is the major problem, as I cant use my phone when I need it. This problem seems to get worse the farther it gets away from the flash date, e.g..,, after a brand new flash it works pretty good and then it goes downhill from there.
Second, it seems to lock up when I let it charge overnight, not always (but most of the time) I get up, click the power button to revive the phone and I have a white screen before me that is frozen solid. This like the previous problem seems to be linked to the distance from the last flash.
I hope that its something Im doing wrong, as Im currently using wmobile 6.5 and since Ive had a taste of the droid os, my wm phone is just disappointing. And as I was unsuccessful in finding a post that adequately describes my problem ,Im hoping that there is a way around this .
I have tried, Incubus Superfroyo, Wrym warm donut, and Cyanogens build. Im sure Ive tried others, they just escape me, I was re-flashing daily until I went back to windows. I truly hope someone out there has encountered what I have and has a solution. thank you all for what you do, these forums have been extremely valuable and helpful.

Sounds like you have the wrong panel type selected. Is it set to auto? if it is, try setting it to 2 instead. That cleared up the problem for me.

Tried all panels all have the same problem.

Well thanks for all the many replies. I give Ive tried everything on this site and m android is still really glitchy. Guess it will be windows until I get perhaps a phone capable of running android smoothly.

What kind of phone do you have?
Sent from my HTC Vision using XDA App

do you have an SD card you can try to boot from and share your settings?

What we need to know is which kernel you're using, or an image of the kernel you currently have. Also, we need to know which radio version you're using, as this can have detremental effects on stability as well.
Personally, I have been using radio version 1.70.19.09, which seems to be the most stable with kernel .25 IMHO.
I have also "personalized" ThoughtlessKyle's "Fat-Free Froyo", adding/removing apps that I need or don't use respectively (navigation, QQPlayer, Pandora, etc.).
Currently, I think I might be one of the only people not experiencing any issues with this phone running Android 2.2.1. I do get the occasional "hang" (I wait for it to finish what it's doing instead of force close), but that usually has something to do with network coverage or an app requesting something from an unopened port.
Old phone, new OS and runs smooth as could be expected.
Next for me will be the HTC HD2 (if I get one at the right price, the tilt was free)...

I know, I know that MANY PEOPLE THINK OF THE WAKE UP WHITE JIBBERISH SCREEN as NEVER WORKING.

PoXFreak said:
What we need to know is which kernel you're using, or an image of the kernel you currently have. Also, we need to know which radio version you're using, as this can have detremental effects on stability as well.
Personally, I have been using radio version 1.70.19.09, which seems to be the most stable with kernel .25 IMHO.
I have also "personalized" ThoughtlessKyle's "Fat-Free Froyo", adding/removing apps that I need or don't use respectively (navigation, QQPlayer, Pandora, etc.).
Currently, I think I might be one of the only people not experiencing any issues with this phone running Android 2.2.1. I do get the occasional "hang" (I wait for it to finish what it's doing instead of force close), but that usually has something to do with network coverage or an app requesting something from an unopened port.
Old phone, new OS and runs smooth as could be expected.
Next for me will be the HTC HD2 (if I get one at the right price, the tilt was free)...
Click to expand...
Click to collapse
Ill try that combination and post my results. The latest I tried was
Scoot CyanogenMod 6.1.2 RLS6 with 2.6.32 still no joy, white screen crashes and hang ups. and it seems progressively worse the longer the rom is on the phone. To whomever asked what phone I have, its the at&t tilt II

srlebonv said:
Ill try that combination and post my results. The latest I tried was
Scoot CyanogenMod 6.1.2 RLS6 with 2.6.32 still no joy, white screen crashes and hang ups. and it seems progressively worse the longer the rom is on the phone. To whomever asked what phone I have, its the at&t tilt II
Click to expand...
Click to collapse
I can't help you regarding panel selection but, please have Radio ROM version 1.65 or higher. And do give my fresh foryo a go with 2.6.25 kernel (everything is there in the thread on how to use it with 2.6.25 kernel).
the WHITE GLITCHY SCREEN IS THE PROBLEM WITH ANDROID DRIVERS. Install with Data on SD Card often causes lockups / force closes.
I am using panel type 1 and white glitchy screen stays for like half of a second and next moment I get a nice clean keylock screen. I don't know but its like 20th time I am explaining the problem related to LCD
Change Panel Type, Get a compatible Radio version (1.65.x or HIGHER)

You say that often install with data on the sd card causes lock ups and freezes. Can you explain further what you mean ?

dark_prince said:
I can't help you regarding panel selection but, please have Radio ROM version 1.65 or higher. And do give my fresh foryo a go with 2.6.25 kernel (everything is there in the thread on how to use it with 2.6.25 kernel).
the WHITE GLITCHY SCREEN IS THE PROBLEM WITH ANDROID DRIVERS. Install with Data on SD Card often causes lockups / force closes.
I am using panel type 1 and white glitchy screen stays for like half of a second and next moment I get a nice clean keylock screen. I don't know but its like 20th time I am explaining the problem related to LCD
Change Panel Type, Get a compatible Radio version (1.65.x or HIGHER)
Click to expand...
Click to collapse
Ok, so I installed your version of froyo, the accompanying 2.6.25, the radio that you use. For the most part the hanging up is fixed. Now the second problem is still in place. Sometimes when Its been in hibernation(or whatever you would call when you hit the power button once ) when I attempt to refresh my phone (hitting the power button once) nothing happens, the green light is still blinking at the top but the screen stays blank, normally have to remove the battery and restart to get back to using the phone. Is this a sleep setting? or is this something Ive done wrong during the installation.

[Q] CM7 eventually just starts showing black screens instead of most things. Why?

This problem only really happens after my phone has been on for days at a time. I have had this problem on the latest stable and latest nightly for CM7 (each one cleanly installed after a total wipe).
What happens is that most screens are replaced with entirely black ones. The most consistent example of this is the settings screen. The first Settings screen (which shows Display, Sound, etc) loads correctly. If I click on any of those, I just get a black screen. This will happen in other applications too, like Baconreader or Browser. Also, another connected issue is that the lockscreen won't animate once this problem starts. I can drag it down to unlock, but the rotary wheel won't move at all. If I drag to the right to load my custom app, the lockscreen won't go away and it will force my to pull the battery.
Has anyone else run into this problem? I'd just like to know I'm not alone. I'm not really expecting a bugfix, especially when I'm not even posting a Logcat.

Did you fix permissions?
midget tossing is habit...2010 midwest regional champion... hw 001

Saturn2K said:
This problem only really happens after my phone has been on for days at a time. I have had this problem on the latest stable and latest nightly for CM7 (each one cleanly installed after a total wipe).
What happens is that most screens are replaced with entirely black ones. The most consistent example of this is the settings screen. The first Settings screen (which shows Display, Sound, etc) loads correctly. If I click on any of those, I just get a black screen. This will happen in other applications too, like Baconreader or Browser. Also, another connected issue is that the lockscreen won't animate once this problem starts. I can drag it down to unlock, but the rotary wheel won't move at all. If I drag to the right to load my custom app, the lockscreen won't go away and it will force my to pull the battery.
Has anyone else run into this problem? I'd just like to know I'm not alone. I'm not really expecting a bugfix, especially when I'm not even posting a Logcat.
Click to expand...
Click to collapse
I suffered this same thing today. Thankfully a full restart fixed out, but I would love to learn a real solution.

bootny said:
Did you fix permissions?
midget tossing is habit...2010 midwest regional champion... hw 001
Click to expand...
Click to collapse
Next time it happens I will, I'm just afraid it will break Facebook/SMS integration like I've had happen before.
It's just so weird since it breaks everything. The lockscreen, the options, Pandora's station list, the browser, and it goes on and on. It's like there's some sort of display mode that gets screwed up.

dom085 said:
I suffered this same thing today. Thankfully a full restart fixed out, but I would love to learn a real solution.
Click to expand...
Click to collapse
What version are you using. I'm going to try to install nightly 77 today after a fresh wipe.

I was seeing the same thing. Now I'm trying to figure out why my data speeds are so painfully slow on CM7 so I can't offer a fix. Flashing back to Warm to troubleshoot 3G.

I get these issues all the time no matter what kernel or nightly I'm running. It has forced me back to sense roms lol

Same problem here. I updated stable mod from stable mod. Reinstalled. Going on 4 days, no issues so far.
Sent from my PC36100 using XDA App

I have the same exact issue. This never happens on a sense rom. I did some tweaks to my system over the past week and I haven't had to reboot since this past Saturday or Sunday. I thought I had fixed it!
Then...
My phone started doing it this morning after I turned on 4G at work, literally as I was writing this post it started doing it. I then turned off 4G.. and it instantly went away. Turning back on 4G and it isnt doing it right now. Now my phone is doing something weird with go sms pro... when I get a text and I respond via the pop up message.. once my text moves to a second line I dont see what I am typing anymore... and now it has progressed to where the pop up box isnt refreshing after I send a message (this is all happening while I am typing this post). Now the phone has become laggy and somewhat unstable... rebooted! All is well. So I went roughly 4-5 days without a reboot... where as before I had to reboot at least once a day.
Thats about the best I can get with these settings:
CM7 7.0.3.1
Savaged Zen 2.6.38.5 CFS > Using SavagedZen Governor, min 384 max 998
Displaying some animations (read somewhere that is a "fix".. or helping extend the time it takes for the Black screen of death to appear).
This is after several full wipes, several when I was running Amon RA recovery 1.8 then updated to the latest and did it two more times. After upgrading Amon and wiping I did not use any backups and started completely from scratch.
So I am not sure what else to do. Some people are getting this, some are not.

[Q] Screen off and keyboard is on bug

Hello,
I got an problem on like 4 of the 5 kaisers here.
The problem is that sometimes the kaisers goes into an sleep where it doenst come out without reset.
You will get an black screen and the light of your keyboard is on and doesnt turn off. When this happens the battery goes from 100% to 0% in like 40 mins. without the problem i can use the phone for 2 days.
My question is how to solve this? I tried the following things.
- Radio 1.65, 1.70. 1.71
- 2 different hspl
- old and new kernel.
- and loads of different roms. from gingerbread to eclair.
Any solution or fix for this? because i can't use it for daily base now since when i dont notice the battery is empty of that bug.
Best Regards,
Veldmuus

That's the black screen of death. I never get that, but it's one of three problems that I have heard of. I think it might be related to going to sleep. I use the latest kernel, from git, which is pretty much identical to scooter1556's kernel with separate cache. What kernel are you using?
The second problem is the white screen of death, which I get a lot when I leave the phone on the charger. The screen is white bright, the kernel is not crashed. Sometimes Fn-Right-soft-key twice will cure this, but usually not. Some have guessed that this has something to do with the phone going to sleep not quite properly while charging. There is an option to not go to sleep while connected to a charger, and I haven't tried that option for a long time.
The third problem is a kernel crash (screen freezes, keyboard doesn't turn on LED, etc) caused by compcache (zram). Can be avoided by not using compcache.
The most annoying issue I have is that I've never figured out how to tweak the build so that apps can be installed to SD. I've been trying to change initrd so that, when installed completely on NAND, the sdcard is completely managed by vold. So far no success, and I've pretty much moved on to my newer phone (Rhodium, aka AT&T Tilt2).

I have spent the last week or so "tweaking" my build.prop file, adding lines for disabling sleep mode, 3G speed tweaks (doesn't do much yet) and fixing small compatibility issues such as AGPS/GPS not working. So far so good, no more sleep of death/black screen/white screen.
If successful, I would ask that the modified build.prop file be added to the Froyo builds on SourceForge, intergrated directly as to eliminate "end user interaction", meaning you won't have to touch it.
I am also looking into some sysinit.rc mods as well, but I haven't had much time lately.
Veldmuus, do you have a way to edit your own build.prop file such as Root Explorer, or would you have to push it to the phone via ADB?