Just got the a100, is there a way to disable the power button LED when it comes to notifications? As soon as i get email it comes on.
Try turning off notifications in the Settings screen. That also stops the Home button from flashing.
Unfortunately that also stops tray notifications as well.
betadan said:
Unfortunately that also stops tray notifications as well.
Click to expand...
Click to collapse
I really do not understand all this "hate" on home button...i find it very useful, when display is off...
Not the home botton but the power button it self flashes
betadan said:
Not the home botton but the power button it self flashes
Click to expand...
Click to collapse
Oh...i see...
But i do not understand the same
spino1970 said:
I really do not understand all this "hate" on home button...i find it very useful, when display is off...
Click to expand...
Click to collapse
I would find it useful if it flashed when the screen is off. . . but that isn't the case. If the screen is off, it doesn't flash, and if the screen is on, it is annoying when it flashes. It is very annoying to me.
[email protected] said:
I would find it useful if it flashed when the screen is off. . . but that isn't the case. If the screen is off, it doesn't flash, and if the screen is on, it is annoying when it flashes. It is very annoying to me.
Click to expand...
Click to collapse
Never notice it...
hi
i hope somebody can help me.
The buttom om my screen, maby an inch over the menu byutton, isent always vorking.
sometimes not even the 3 menu buttons. i have to turn off the screen and on again. this will usaley fix the issue.
When i am texting, sometimes it goes totaly mad on me, and the phone it self is pressing the keybord wery fast. making alot of stranges words .
i have to turn off the screen and on again for me to fix it.
seems taht i did not have the problem on stork. i have ben using leedroid 6.4. and wanted to test is a new firmware could fix it.
i turned to wiper xx. but this did not help. i even trayed an install without sence...
seems that i remember that the issue first starded a day when my phone got 100 % out off power..
anybody know how to help me ?
thanks!!
Are you talking about the 3-dot menu? Or the softkeys actually underneath the screen, I didn't understand what you was getting at, I'm sorry, your English isn't very clear.
If you can take and upload screenshots I'll try to help you.
Screenshots: Press and hold your power button down and then press the homekey.
only was to describe this is an intermitant fault sometimes it workss other times if canb take 5 mins start working
baically its after its been in iddle mode the touch screen stops working then it will start again at a random point
anyone know how fix this?
is the phone stuck or the touch doesn't work?
power button works and so does volume so i would say its the touch that dont work as the phone still reesponds
robbrookes5 said:
power button works and so does volume so i would say its the touch that dont work as the phone still reesponds
Click to expand...
Click to collapse
yep, so most of these cases are related to HW problems, you probably need to change the digitizer...
hi
i have here a Htc One X will not turn on or even charge just black screen we changed the battery still nothing i google it alot of sites said
press power button and - V for 10 seconds i did that but it only vibrated the phone no htc logo or anything !
any ideas friends ??
At least there is vibration feedback from your phone. Have you try connecting it to the pc?
farooq88 said:
hi
i have here a Htc One X will not turn on or even charge just black screen we changed the battery still nothing i google it alot of sites said
press power button and - V for 10 seconds i did that but it only vibrated the phone no htc logo or anything !
any ideas friends ??
Click to expand...
Click to collapse
YEAH Black Screen of DEAD changing mainboard is the only solution
Thant said:
YEAH Black Screen of DEAD changing mainboard is the only solution
Click to expand...
Click to collapse
but it vibrate doesn't that mean the logicboard is working ?
farooq88 said:
but it vibrate doesn't that mean the logicboard is working ?
Click to expand...
Click to collapse
on BSD is the same the phone work ring but you can do anything because you see nothing you can't pick up the call or do enything
Thant said:
on BSD is the same the phone work ring but you can do anything because you see nothing you can't pick up the call or do enything
Click to expand...
Click to collapse
but what about all those post about pressing v- with power for 15 second or more and putting sensor in front bright light ??
farooq88 said:
but what about all those post about pressing v- with power for 15 second or more and putting sensor in front bright light ??
Click to expand...
Click to collapse
OK have two things one the screen not working possible and second you have BSD search in thread for BSD and I have many post how to check if this is your problem
Hi, today in the morning i noticed an issue with the touchscreen, especially, on the left edge. I noticed that issue while i was writing and trying to switch the key of numbers and letters.
While i try to write and press "?123 or ABC" key, sometimes it doesn't work and i have to press twice.
Have u ever noticed something similar? I have tried by changing the keyboard, restarting, calibrating and I can't fix the issue.
Thanks in advance.
osmxgohan said:
Hi, today in the morning i noticed an issue with the touchscreen, especially, on the left edge. I noticed that issue while i was writing and trying to switch the key of numbers and letters.
While i try to write and press "?123 or ABC" key, sometimes it doesn't work and i have to press twice.
Have u ever noticed something similar? I have tried by changing the keyboard, restarting, calibrating and I can't fix the issue.
Thanks in advance.
Click to expand...
Click to collapse
I have the same problem
Same too, I use gboard keyboard
osmxgohan said:
Hi, today in the morning i noticed an issue with the touchscreen, especially, on the left edge. I noticed that issue while i was writing and trying to switch the key of numbers and letters.
While i try to write and press "?123 or ABC" key, sometimes it doesn't work and i have to press twice.
Have u ever noticed something similar? I have tried by changing the keyboard, restarting, calibrating and I can't fix the issue.
Thanks in advance.
Click to expand...
Click to collapse
What keyboard are you using?
tze_vitamin said:
What keyboard are you using?
Click to expand...
Click to collapse
Whatever keypad I use. I've tried several of them, but it's the same.
007Gogi said:
Whatever keypad I use. I've tried several of them, but it's the same.
Click to expand...
Click to collapse
same too , I hope it is not a hardware's issue.
I have the same problem. In my case, the other side of the touchscreen has the same issue as well (Gboard enter button). Did you guys check the touch sensor test (the one in diagnostics menu -> additional tools)? It seems that only two squares are affected. The left and right outermost square in the penultimate row. Try tapping fast, it's sometimes not registering. I really hope this is not a hardware issue though...
Have you tried to disable screenshot gesture? Please try it and report if the issue are resolved. I don't have a rdm8pro but on other redmi i have the same issue and the screenshot gesture of miui create the problem.
intelinside70 said:
Have you tried to disable screenshot gesture? Please try it and report if the issue are resolved. I don't have a rdm8pro but on other redmi i have the same issue and the screenshot gesture of miui create the problem.
Click to expand...
Click to collapse
Unfortunately it didn't help. The issue is still present.
Go to settings and tap on kernel couple times and do CIT test of screen
tze_vitamin said:
Go to settings and tap on kernel couple times and do CIT test of screen
Click to expand...
Click to collapse
I already did it. I could observe the same problem while performing the test. I just want to know if it's a widespread issue before I return my phone.
c1rcle said:
I have the same problem. In my case, the other side of the touchscreen has the same issue as well (Gboard enter button). Did you guys check the touch sensor test (the one in diagnostics menu -> additional tools)? It seems that only two squares are affected. The left and right outermost square in the penultimate row. Try tapping fast, it's sometimes not registering. I really hope this is not a hardware issue though...
Click to expand...
Click to collapse
it's exactly the same in my case , I have noticed that more happens if you touch repeatedly in the middle of the screen and then at the ends
sorry for bad english
I went to a local Mi Store earlier today and the unit they have on display suffered from the same touch screen issue. I don't think replacing the device would help as it seems that a large amount of them might be having the same problem. If anyone's device is functioning correctly, please let us know.
This is just in the corners , I noticed to.. when I want to press 123 to go to numeric pad, I noticed that the screen dont react in some times..that not the screen issue, this is more like ..I dont know how to explain it on English..but everything is ok with screen when you press the right place..
Try press this line that I marked on this screenshot and you will se that the display is not responding.. this is not hardware or software error.. this is jus the line on keyboard that have no function and not react when you touch it. But when you touch right place on number 123.. everything is ok..
So ..your phone and everyone else is working fine.
Also this is just happened on keyboard..on other apps,this place on screen also like in CIT test working..
tze_vitamin said:
This is just in the corners , I noticed to.. when I want to press 123 to go to numeric pad, I noticed that the screen dont react in some times..that not the screen issue, this is more like ..I dont know how to explain it on English..but everything is ok with screen when you press the right place..
Try press this line that I marked on this screenshot and you will se that the display is not responding.. this is not hardware or software error.. this is jus the line on keyboard that have no function and not react when you touch it. But when you touch right place on number 123.. everything is ok..
So ..your phone and everyone else is working fine.
Also this is just happened on keyboard..on other apps,this place on screen also like in CIT test working..
Click to expand...
Click to collapse
Try touching the highlighted tiles and then compare it to other ones. Look at the attached screenshots.
tze_vitamin said:
This is just in the corners , I noticed to.. when I want to press 123 to go to numeric pad, I noticed that the screen dont react in some times..that not the screen issue, this is more like ..I dont know how to explain it on English..but everything is ok with screen when you press the right place..
Try press this line that I marked on this screenshot and you will se that the display is not responding.. this is not hardware or software error.. this is jus the line on keyboard that have no function and not react when you touch it. But when you touch right place on number 123.. everything is ok..
So ..your phone and everyone else is working fine.
Also this is just happened on keyboard..on other apps,this place on screen also like in CIT test working..
Click to expand...
Click to collapse
the touches have to be fast, if you make them slow the problem "disappears"
c1rcle said:
Try touching the highlighted tiles and then compare it to other ones. Look at the attached screenshots.
Click to expand...
Click to collapse
I can take a screenshot,how did you do this?
tze_vitamin said:
I can take a screenshot,how did you do this?
Click to expand...
Click to collapse
You mean you are unable to access this particular test? Just tap the 3 dots in the top right corner of the screen when you get to the CIT test menu. Then select 'Additional tools'. Tap the 8th item on that list which says 'Touch sensor' and you will be greeted with that test screen.
apparently if it was a software problem, update a few minutes ago and the problem seems to have been resolved
c1rcle said:
You mean you are unable to access this particular test? Just tap the 3 dots in the top right corner of the screen when you get to the CIT test menu. Then select 'Additional tools'. Tap the 8th item on that list which says 'Touch sensor' and you will be greeted with that test screen.
Click to expand...
Click to collapse
Dude, e know how to do that.
I can take a screenshot, my CIT test shows that everything is ok with my screen