Hello my name is Mike is there anybody who can help my to make my phone working again?! I dont even know where to start and how to explain what is going on! Honestly i ****ed up! Today everything working fine as ussualy on my HTC desire with 2.2 froyo which I instaled long time ago.. I decided to format phone thruu (volume down + power button) what I done was those actions ,,wipe data/factory reset'' then possibly formated system data cache i mean everything.. so now there is nothing on my SD card ... and I just realised I am stuck here as I dont know how to put system to my phone again as I am unable to boot to home screen which I am more familiar with..
After pressing power button now I can see following
BRAVO PVT1 SHIP S-ON
HBOOT-0.00.0000
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.09.0020
mar 29 2010,21:34:33
i can choose to bootloader,reboot,rebootbotloader,power down then i can got thru bootloader to recovery and there i can moving down up as I like I can mount sd card to pc whatever i want I just dont know what to do anyway.
Anybody who can help please I will appreciater any help.Thank you
Download this RUU:
http://shipped-roms.com/download.php?category=android&model=Bravo&file=RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
Boot to fastboot holding the back button while you power on your phone. Connect phone to computer an run the RUU update.
If your device is branded you will have to use a RUU matching your operator.
Hello my tel is branded to Vodafone .. ANd one more think I am bit a retarded so I would aprriciate some more detailed guide how to instal u ment run that RUU from windows ? btw thank you
UPDATE I trayed your rom and its says Error 170 usb failure.. is it becouse of not Vodafone rom?
ERROR [170]: USB CONNECTION ERROR that what is says even after vodafone one RUU
No, it's an error on the USB Connection...
well its says FASTBOOT. As soon as I connected USB from pc its says FASTBOOT USB so usb might work.
Guys anybody? I am stuck without phone well my fault ;o) i know..
Tried turning off any antivirus/firewall?
Do you have htc sync installed? If not, try installing it.
Sent from my HTC Desire using Tapatalk
Hello Mikep I installed htc sync disabled firewall and anti virus.. HTC sync after i connected phone wont find phone it says no device connected, bu when i pugged that cable to phone and pc windows says HTS device driver installer corectly ...
Have you tried now running the RUU with antivirus/firewall off?
Basically, disconnect phone, boot into fastboot (power & back key), plug phone into PC. It should now show FASTBOOT USB or similar.
Then try the RUU.
Sent from my HTC Desire using Tapatalk
acctually something is going on it kight working i will update u after all of taht proces finish.
Please don't rush to unplug your phone tho!!
Sent from my HTC Desire using Tapatalk
u are perfect it is everything ok now here !!! Really thank you Mikep99!
No problem
A joint effort between all the previous posters I think
Enjoy!
Sent from my HTC Desire using Tapatalk
Related
hello i have desire with
BRAVO PVT1 SHIP S-ON
HBOOT-0.93.001
MICROP-031D
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
AUG 10 2010.17:52:10
ITS STUCK ON HTC LOGO . I CAN GO IN HBOOT BUT PROBLEM IS I TRIED MANY ROMS BUT ITS ALWAYS SAY MAIN FIRMWARE IS OLDER FLASHING FAILED
ITS ORANGE BRANDED PHONE
PLEASE HELP NEEDED ANY EXPERT
Did you root?
Sent from CM7
no i dint root . can i root phone in this condotion? if possible please can u tell me the way?
you can root in hboot screen.
and root tools ,I suggest unrevoked 3.21 (root tools included clockworkmod 2.5.x recovery) .
good luck man.
You can't flash roms without rooting. Download this and if your on Windows, download the drivers too and also read the page so the drivers install properly. After you have done all of that, run the utility. Please be aware that issues may arrise when your done and no one but yourself takes responsibility what happens, but nontheless, it should be fine.
When your done rooting, go into the recovery and go to backup and restore > backup and it will backup the whole phone. Keep this just in case. It will go on your SD Card > clockworkmod/backup.
my phone is connected in HBOOT but unrevoked say connect phone in usb debugging mode now how can i connect in debuging while phone can only enter in HBOOT
I have the exact same problem, I applied the f***** HTC update and the phone never started afterwards. Just the HTC logo then reboots.
I will try to root the phone as suggested by Meaple and kosterz and will let you know how it turns.
HTC Desire help
Dear xda community
I have a O2 htc desire from uk. Warranty expired. ( now I m in Pakistan so it is not possible to me send it to htc company because here is no htc service shop and If I send it uk or other country expenditure are more than phone price) When I update it with 2.14.207.3 during updating wifi disconnect and phone stacked I remove the battery and on it. Now it stacked on htc logo and show 4 exclamation sign in triangular.
Picture
When I connect it with pc and then disconnect it screen will be appear
Picture
Bravo PVT1 ship s-on
Hboot-0.93 0001
Microp-031d
Toutch Panel-synt0101
Radio 0-5.11.05.27
Aug 10 2010.17.52.10
RUU
No volume key , menu key or back key work
I try to O2 2.14.207.1 rom Ruu upload but when it reached at 85% green installation bar full on the phone and message appear.
ERROR [110]: FILE OPEN ERROR
This error message indicates that the RUU lacks some specific files or they are damaged, so the RUU cannot continue with the update. You have to get the complete RUU package and try again.
And at the pc recover your phone after all process recover successful but when I on the phone it is on same condition
I download this rom from many sites and try it but result is same.
In RUU read me file they said that
Q: I used RUU to update and it failed. Now, my Android phone always boots in the RUU failed mode and cannot enter the Android Home screen anymore, what should I do?
A: This is normal and can be recovered. Follow the instructions below to reset your Android phone and to establish a connection with the PC.
1. Disconnect your Android phone from the USB cable.
2. Reset your Android phone (Remove and reinstall the battery).
3. Reconnect your Android Phone to the USB cable.
4. Check if the Android phone is recognized by the PC.
5. Return to the ROM Update Utility.
So please tell me any solution. I will be thankful to you.
anyhelp from anybody els?
friends
Dear xda community
I have a O2 htc desire from uk. Warranty expired. ( now I m in Pakistan so it is not possible to me send it to htc company because here is no htc service shop and If I send it uk or other country expenditure are more than phone price) When I update it with 2.14.207.3 during updating wifi disconnected and phone stucked/Halted. I remove the battery and switched on it. Now it stucked on htc logo and show 4 exclamation signs in 4 corners of screen.
When I connect it with pc and then disconnect that screen will be appeared.
Bravo PVT1 ship s-on
Hboot-0.93 0001
Microp-031d
Toutch Panel-synt0101
Radio 0-5.11.05.27
Aug 10 2010.17.52.10
RUU
No volume key, menu key or back key work
I try to O2 2.14.207.1 rom Ruu upload but when it reached at 85% green installation bar full on the phone and message appear.
ERROR [110]: FILE OPEN ERROR
This error message indicates that the RUU lacks some specific files or they are damaged, so the RUU cannot continue with the update. You have to get the complete RUU package and try again.
And at the pc recover your phone after all process recover successful but when I switched on the phone it is on same condition
I download this rom from many sites and try it but result is same.
In RUU read me file they said that
Q: I used RUU to update and it failed. Now, my Android phone always boots in the RUU failed mode and cannot enter the Android Home screen anymore, what should I do?
A: This is normal and can be recovered. Follow the instructions below to reset your Android phone and to establish a connection with the PC.
1. Disconnect your Android phone from the USB cable.
2. Reset your Android phone (Remove and reinstall the battery).
3. Reconnect your Android Phone to the USB cable.
4. Check if the Android phone is recognized by the PC.
5. Return to the ROM Update Utility.
So please tell me any solution. I will be thankful to you.
With the phone OFF, can you press and hold the Vol - key, then at the same time, press and release the Power button? It should boot into a recovery menu.
Go get the latest ruu, wwe version and use that. You maybe might have to create a goldcard buy that's only if you get a Cid problem.
Sent from CM7
Yeah, when you said your "buttons" do not work, well, it leaves a lot to the imagination......
Can you goto Bootloader??? Or is it only when you get the white sceen of "almost death"?
HTC desire in Hboot mode volum and other keys not work
dears
my phone is s-on and in the H-boot loader mode. i also make a goldcard but keys are not work and i can't change it to recovery or other mode.
ples help me
Hoping someone can please help!
I have the HTC Desire and it appears to be frozen on the hboot screen, volume and power keys unresponsive........
The screen says:
BRAVO PVT4 SHIP S-ON
HBOOT - 0.93.0001
MICROP - 051d
TOUCH PANEL - SYNT0101
RADIO - 5.11.05.27
HBOOT
FASTBOOT
RECOVERY
CLEAR STORAGE
SIMLOCK
None of the keys work, unable to even turn phone off without removing battery. Phone is unrecognised when connected to PC..............
I'm totally dumb when it comes to anything technical so totally stuck!!
Is your phone on stock? If yes, give htc a ring.
Hi, i phoned my network provider and they gave me HTC phone number which was automated message telling me to go to google !!
Plug it in to ur PC and see if hboot changes to hboot USB plug
Sent from my HTC Desire using XDA App
ClareLK said:
Hi, i phoned my network provider and they gave me HTC phone number which was automated message telling me to go to google !!
Click to expand...
Click to collapse
Complain that the phone number does not work?!
reaper7881 said:
Plug it in to ur PC and see if hboot changes to hboot USB plug
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Yes it does change......
MatDrOiD said:
Complain that the phone number does not work?!
Click to expand...
Click to collapse
I've since found out that HTC don't work sundays !
> reaper7881
Meant to add that although it changes to hboot USB plug when plugged into the laptop, the laptop doesn't recognise it and still unavailable to do anything on the phone screen...... yet my own htc desire ( Broken one is hubby's) connects perfectly to the pc
Is it beyond repair...
I have the exact same problem. it went swimming with my phone. it now does exactly what your is doing. I have mine sitting in a bag of rice. will try again in 2 days. other then that is there any way of loading anything from hboot?
When u mean ur desire connects perfectly do u mean in hboot mode or just mount SD card in android. Also on the broken phone boot in to fastboot and plug it in then check if you have the fastboot drivers installed. To do this just look in the device manager for something like android 1.0
Sent from my HTC Desire using XDA App
reaper7881 said:
When u mean ur desire connects perfectly do u mean in hboot mode or just mount SD card in android. Also on the broken phone boot in to fastboot and plug it in then check if you have the fastboot drivers installed. To do this just look in the device manager for something like android 1.0
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Nothing works, all keys unresponsive and screen stays on hard reset :/
Hi,
Let me start with my device info.
HTC Desire
- Bravo PVT4 SHIP S-ON
- HBOOT-0.93.0001
- MICROP-051d
- Touch panel-synw0101
- radio-5.09.05.30_2
- Aug 10 2010,17;52;18
Current image version
RUU_Bravo_Froyo_Chunghwa Taiwan carriers (version: 2.10.751.4)
I'm running Windows Vista x86
That's all I got.
Now, the problem.
Everytime I turn the device on, it get stuck at the White HTC Windows and vibrates several times, I think this is a pretty common problem, so I won't stress this issue too much.
The solutions that I found are.
As my device is S-ON my options are limited. I can't boot recovery, so..
I download the latest RUU_Bravo_Froyo_HTC_WWE_2_29_405_5_Radio_32_49_00_32U_5_11_05_27_release_159811_signed_2
Now, I run the ruu until ask to connect, I connect my device, the ruu recognize and identify my device, it ask to update, everything good. Updating process start and suddenly stops and tells me, "error 131, customer id error"
and that I need to use the right RUU utility.?
So I decided to avoid the USB connection and try to flash it directly from the SDCARD, I extracted the rom.zip from the above file, change the name to PB99IMG.ZIP, put it on my device, volume + power, but nothing.
so thinking that something is missing, I select fast boot, the device shows some text in green, even shows the PB99IMG.ZIP file, and is back to the bootloader screen and nothing happens.
What else can I do to bring to life my device, if I choose recovery with the PB99IMG file in the sdcard, the device shows a black screen with a red triangle.
I think is something with that taiwanes RUU, but maybe not.
Could any one please put me in the right direction
Thanks in advance
Sovius
As my device is S-ON my options are limited. I can't boot recovery, so..
Click to expand...
Click to collapse
Can you boot into fastboot? Using revolutionary.io will give you S-OFF and then you can flash a recovery - since you are PVT4, then AmonRa or newest CWM recommended.
You need a goldcard to RUU with that RUU. Download the 2.3.3 RUU from htcdev.com. this should resolve the Id issue.
Sent from my HTC Desire using xda premium
Thanks for you replays
This is what happen now.
davebugyi
In tried to S-Off with Revolutionary, I remove HTC Sync and install the drivers required. > Back + Power > the device is in fastboot screen > connect the USB cable and the device seems to be recognized by the computer but no notification of that is given, except for a beep (like when you plug a USB flashdrive) but no letter is assign to the device or anything. > I double click revolutionary and the program said "waiting for device", I left it for 30min, but nothing.
As I cannot get inside the device, the problem might be that revolutionary requires my device to have "USB debugging on" I don't know if is on or not.
rootSU
How do I create a Gold Card, if I can't get inside the device to set everything up?. Can I use another Gold card or they are exclusive of each device.?.
Your recommendation are Welcome, Please let me know if you need anything from me to have a much clear understanding about what's going on.
I'll make a video to show you exactly what happening and what I'm doing
Cheers
Hi,
I had a camera malfunction and so I needed to get my phone sent to warranty therefore I need a stock rom.
I saw here that for warranty purposes I should use 2.3 GB RUU so I did...
I made a goldcard and it seemed to be working properly.
I started 2.3 GB RUU and after a while I got an error:
ERROR [171]: USB CONNECTION ERROR
My phone is now stuck on a black HTC screen. (I don't have this symbol that some report having after RUU: /!\ . I repeat i do NOT have that symbol)
What should I do? It's been like this for 12 minutes now...
Pop off the battery and see if it starts normaly?
EDIT:
I've removed the usb cable and I'm now on a screen like this:
http://img828.imageshack.us/img828/5206/updateo.jpg
What to do next?
Use PB99IMG in my sig. (no usb error ) just put it on ur sdcard then while ur phone is off hold volume down + power, bootloader will find PB99IMG and ask to update, volume up for yes, good luck.
Sent from my HTC Desire
I got to work just by switching to another pc. Thanks anyway