[Q] Radio Flash & CID Change - Desire HD Q&A, Help & Troubleshooting

Hi
At first, sorry for my bad english
I have allready successfull flashed my DHD (Root, S-OFF, Radio S-OFF)
Now i try to flash a DHD with Swisscom Branding (
C:\android\tools>adb shell getprop ro.cid
VODAP110)
My problem: I can't flash any Radio after Root & SHIP S-OFF and i can't change the CID:
C:\android\tools>fastboot flash radio radio.img
sending 'radio' (24832 KB)... OKAY
writing 'radio'... FAILED (remote: not allowed)
I've tryd at the last 2 day's all available howto's...such as:
http://forum.xda-developers.com/showthread.php?t=855403&highlight=SYSTEM+INFO
http://forum.xda-developers.com/showthread.php?t=896597
http://forum.xda-developers.com/showthread.php?t=855403
I can flash ROMs, i can flash RUU's but my CID is always the same! VODAP110
what can i do? or what i've maked false?
the hboot Menu is strange...i have no SYSTEM INFO...only:
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
via shell:
C:\android\tools>fastboot getvar all
< waiting for device >
INFOversion: 0.5
INFOversion-bootloader: 0.85.0004
INFOversion-baseband: 26.02.00.29_M4
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 1.24.405.1
INFOserialno: HT0CNRX14993
INFOimei: 356299042377414
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4204mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-e0c48fbb
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
when i have a look at my unbrandet DHD there is a Menupoint SYSTEM INFO... why?
thanks a lot for your advice!
greez

It seems that you haven't Eng Hboot
Look here : http://forum.xda-developers.com/showthread.php?t=835746

thnx! radio flash works now fine!
but my CID is still VODAP110...:
C:\android\tools>adb shell getprop ro.cid
VODAP110
i've tried the Desire HD easy radio tool v2_2 again and again...no change!

Gysu said:
thnx! radio flash works now fine!
but my CID is still VODAP110...:
C:\android\tools>adb shell getprop ro.cid
VODAP110
i've tried the Desire HD easy radio tool v2_2 again and again...no change!
Click to expand...
Click to collapse
Strange.
On my DHD, i just ROOT and used Easy radio Tool v2_2 and hboot S-OFF
And when i go into system info in the bootloader, i see CID 11111111

d3rf said:
Strange.
On my DHD, i just ROOT and used Easy radio Tool v2_2 and hboot S-OFF
And when i go into system info in the bootloader, i see CID 11111111
Click to expand...
Click to collapse
@bootloader SYSTEM INFO i also see CID = 1111111
but when i run Android and i read my CID via adb or CID Getter app there is still the CID = VODAP110....
the 1.000.000 million dollar question now is: can i load (with this config) HTC OTA updates or must i still waiting of updates from my provider?

Gysu said:
@bootloader SYSTEM INFO i also see CID = 1111111
but when i run Android and i read my CID via adb or CID Getter app there is still the CID = VODAP110....
the 1.000.000 million dollar question now is: can i load (with this config) HTC OTA updates or must i still waiting of updates from my provider?
Click to expand...
Click to collapse
In MOST cases once you do these changes you loose the ability to do OTA
Why have you done this is you still feed the need to stick with the stock rom?

Gysu said:
@bootloader SYSTEM INFO i also see CID = 1111111
but when i run Android and i read my CID via adb or CID Getter app there is still the CID = VODAP110....
Click to expand...
Click to collapse
I can't remember where I read it, but this is a known issue, but the SYSTEM INFO is the one that interferes with your ability to flash new radios so don't panic

ghostofcain said:
I can't remember where I read it, but this is a known issue, but the SYSTEM INFO is the one that interferes with your ability to flash new radios so don't panic
Click to expand...
Click to collapse
same probl.... but which is the right CID?The one in bootloader SYSTEM INFO that shows CID = 1111111 or the one we read via adb or CID Getter app ?
How to finally change it?

Spaghetti-XRY said:
same probl.... but which is the right CID?The one in bootloader SYSTEM INFO that shows CID = 1111111 or the one we read via adb or CID Getter app ?
How to finally change it?
Click to expand...
Click to collapse
Technically they are all right, but the important one is the bootloader one, which tells the phone in bootloader mode that it's unbranded. As i said earlier it's a known issue and being worked on so currently your stuck with the different CIDs

An Android known issue or an Htc / operator branding one? I'd like to know right know
Anyway I solved, installing a stock ROM 1.32.x, visionary+ permroot and one tool eng s-off. SystemInfo appeared into menu.

Related

[Q] can i get some luck? Going back to stock

Hello everybody,
I tried to install jellytime on my Desire HD, so i used Easy Ace Root Tool.
I used fastboot command to flash the boot.img to the phone and since then, the only menu available is the one of the bootloader.
As far as i tried the ruu packages fail to restore things.
Is there a way (preferably a guide) to return my phone to stock ?
Loading to fastboot now shows:
*** relocked ***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011, 14:28:19
Thanks!
gavanas said:
Hello everybody,
I tried to install jellytime on my Desire HD, so i used Easy Ace Root Tool.
I used fastboot command to flash the boot.img to the phone and since then, the only menu available is the one of the bootloader.
As far as i tried the ruu packages fail to restore things.
Is there a way (preferably a guide) to return my phone to stock ?
Loading to fastboot now shows:
*** relocked ***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011, 14:28:19
Thanks!
Click to expand...
Click to collapse
fastboot getvar all
and post the results.
nlooooo said:
fastboot getvar all
and post the results.
Click to expand...
Click to collapse
C:\Users\George Gavanas>fastboot getvar
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: SH15ZRX00171
INFOimei: ???
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4035mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.010s
gavanas said:
C:\Users\George Gavanas>fastboot getvar
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: *************************
INFOimei: **********************
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4035mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.010s
Click to expand...
Click to collapse
Go here
http://www.shipped-roms.com/index.php?category=android&model=Ace
download thi RUU
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed.exe
And try to run it with phone in fastboot.
If that doesn't work try with some RUU that has 3.13.xxx.x main version (i.e. RUU_Ace_Sense30_S_hTC_Asia_WWE_3.13.707.4_R_Radio_12.65.60.29_26.14.04.28_M_release_234022_signed.exe)
both result in error...
The second says ID error
is there any way i can restore the original firmware? maybe put it in the sd card?
gavanas said:
both result in error...
The second says ID error
is there any way i can restore the original firmware? maybe put it in the sd card?
Click to expand...
Click to collapse
I found the rom.zip from the second file, renamed it to PD98IMG.zip and inserted it to my sd, but it say CID error.
I saw that everyone says about a goldcard but i don't seem to get it. The goldcard generator i downloaded say they could not locate the CID. Can i download a CID image?
Where should i put it, if i find one?
Thanks!
gavanas said:
I found the rom.zip from the second file, renamed it to PD98IMG.zip and inserted it to my sd, but it say CID error.
I saw that everyone says about a goldcard but i don't seem to get it. The goldcard generator i downloaded say they could not locate the CID. Can i download a CID image?
Where should i put it, if i find one?
Thanks!
Click to expand...
Click to collapse
I have tried many different ruu's and always get an error.
When i flash with PD98IMG i get a cid error
Is there any way out?
Even with a custom rom (jellytime)
Please help!!!:crying:
Use AAHK2
gavanas said:
I have tried many different ruu's and always get an error.
When i flash with PD98IMG i get a cid error
Is there any way out?
Even with a custom rom (jellytime)
Please help!!!:crying:
Click to expand...
Click to collapse
Try the AAHK2 Script. Make sure you follow all the instructions before using the script.. It will automatically do things for you and just follow the on screen instructions... At the end you will have your Stock Rom perfectly running... :good:
Delete your imei #
Get nloooo to delete it from the quote as well.
Sent from a dream.
gkprashu said:
Try the AAHK2 Script. Make sure you follow all the instructions before using the script.. It will automatically do things for you and just follow the on screen instructions... At the end you will have your Stock Rom perfectly running... :good:
Click to expand...
Click to collapse
I used AAHK2 when my phone got into a similar situation. It worked like charm
gavanas said:
I have tried many different ruu's and always get an error.
When i flash with PD98IMG i get a cid error
Is there any way out?
Even with a custom rom (jellytime)
Please help!!!:crying:
Click to expand...
Click to collapse
Do not use the AAHK2 if you are trying to return to stock for warranty purposes, thou I highly doubt that you still have warranty on this device .
In order to bypass the CID error you need to use a goldcard. Otherwise, you will need the exact ruu for your device.
glevitan said:
Do not use the AAHK2 if you are trying to return to stock for warranty purposes, thou I highly doubt that you still have warranty on this device .
In order to bypass the CID error you need to use a goldcard. Otherwise, you will need the exact ruu for your device.
Click to expand...
Click to collapse
After trying the 4.3 beta versions, i tried again to install the original firmware.
As before, the ruu setup did not work. It should, since my cid is HTC__001, and i was trying with every WWE version available.
Anyway, during setup, i found in the temp folder the rom.zip, and within it the necessary boot.img, system.img and recovery.img.
I flashed them through cmd using fastboot.
Everything worked out, now i am back to stock, but i guess that my phone is something like Frankenstein, using the radio and libraries from the last jellytime image i installed...
It works, but i don't recommend it. I think that i finally got lucky, and didn't brick my Desire HD.
Thanks for all your help and interest.
glevitan said:
Do not use the AAHK2 if you are trying to return to stock for warranty purposes, thou I highly doubt that you still have warranty on this device .
In order to bypass the CID error you need to use a goldcard. Otherwise, you will need the exact ruu for your device.
Click to expand...
Click to collapse
That is weird as ruu's flash all partitions.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
glevitan said:
That is weird as ruu's flash all partitions.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
i think you misunderstood him mate, he flashrd only specific img files from ruu not the whole thing. in this case, radio doesnt get flashed, but that shouldnt be to big of a problem.
to op: custom roms dont contain radios. so radio that is on your device is the same as before you flashed jellytime
t0mas_ said:
i think you misunderstood him mate, he flashrd only specific img files from ruu not the whole thing. in this case, radio doesnt get flashed, but that shouldnt be to big of a problem.
to op: custom roms dont contain radios. so radio that is on your device is the same as before you flashed jellytime
Click to expand...
Click to collapse
Well, RILs are not compatible then, and many AOSP partitions can not work fine with Sense Roms. If he did that then his cell might explode....
forgot about rils and didnt know about partitions.
but expoding cells are not to be taken lightly, especially when put in trouser pocket

[Q] Help with RUU hboot 1.18.0000

Hi I have a htc one v on 3 (H3G__001) it is on hboot 1.18.0000 radio 3831.19.00.120
I cant seem to find a ruu file for it even on androidfileshost.
all other ruu files fail at one point or another usually due ro wrong CID or older HBOOT
I have tried running a ruu with the correct hboot then when it got to the confirmation page i types %.temp% and found where the temp
install files were and i opened the rom.zip and edited the android-info.txt file adding H3G__001 to the file saving it and rezipping it then
continuing with the RUU installation.
Im hoping someone can help me recover the phone as im stuck in how to get it back working.
It is my fault as I locked the bootloader when returning to stock BEFORE I flashed the recovery and hboot (I know im an idiot) and htcdev wont unlock my relocked bootloader it just freezes then eventually gives me the "too many links" error message
here is the info I got from typing fastboot getvar all
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.18.0000
INFOversion-baseband: 3831.19.00.120
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOserialno: HT24JTV02137
INFOimei: 351816054460252
INFOproduct: primou
INFOplatform: HBOOT-7230
INFOmodelid: PK7610000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 3954mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 8591a55c
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
Thank you for reading and I hope you can help.
micky3936 said:
Hi I have a htc one v on 3 (H3G__001) it is on hboot 1.18.0000 radio 3831.19.00.120
I cant seem to find a ruu file for it even on androidfileshost.
all other ruu files fail at one point or another usually due ro wrong CID or older HBOOT
I have tried running a ruu with the correct hboot then when it got to the confirmation page i types %.temp% and found where the temp
install files were and i opened the rom.zip and edited the android-info.txt file adding H3G__001 to the file saving it and rezipping it then
continuing with the RUU installation.
Im hoping someone can help me recover the phone as im stuck in how to get it back working.
It is my fault as I locked the bootloader when returning to stock BEFORE I flashed the recovery and hboot (I know im an idiot) and htcdev wont unlock my relocked bootloader it just freezes then eventually gives me the "too many links" error message
Thank you for reading and I hope you can help.
Click to expand...
Click to collapse
Not even here: http://androidruu.com/?developer=Primo
And, are you primou or primoc?
No sadly its not on there as only for older hboots for my phone. there is 1.18.000 hboots on there but not to match my cid.
Im on primou with 3 uk which is H3G__001

Having troubles unlock bootloader

Hi guys, I´ve bought a DHD, it is my third DHD and the first with troubles. I always did the job using the instructions on htcdev website, but this time it stucks.
The problem? My DHD is a vodafone branded, software number 3.13.161.5 at the htcdev site they dont offer this RUU, only the 3.13.161.3 and of course it won´t work.
In the fastboot menu I got following infos...
ACE PVT SHIP S-ON RL
HBOOT 2.00.0027
RADIO 26.14.52.27
eMMC-boot
does anyone got this appropriate RUU to download so I can do the job, or can it be done on some other way, but please as easy as possible
Thanks
profcb said:
Hi guys, I´ve bought a DHD, it is my third DHD and the first with troubles. I always did the job using the instructions on htcdev website, but this time it stucks.
The problem? My DHD is a vodafone branded, software number 3.13.161.5 at the htcdev site they dont offer this RUU, only the 3.13.161.3 and of course it won´t work.
In the fastboot menu I got following infos...
ACE PVT SHIP S-ON RL
HBOOT 2.00.0027
RADIO 26.14.52.27
eMMC-boot
does anyone got this appropriate RUU to download so I can do the job, or can it be done on some other way, but please as easy as possible
Thanks
Click to expand...
Click to collapse
In htcdev site it says:
"NOTE: If you do not find your ROM version in the table below, and your ROM version is newer, then your device does not require the RUU. Please bypass these steps and continue to the next page."
Because you have newer hboot, just go to next page.
If you whant to get full unlocked bootloader S-off you can use AAHK2 by Phiber2000.
http://forum.xda-developers.com/showthread.php?t=2367322
But it's a little complicated.
Thank you for your reply, but I tried this already, and it wont work. Maybe because my HBOOT is 0027??? I´d rather not to perform a S-off cause I never did it before...
I open the CMD and type fastboot oem_get_identifier_token and the result is : ... INFO(ERR) Command error!!!
I cannot get the token!
profcb said:
Thank you for your reply, but I tried this already, and it wont work. Maybe because my HBOOT is 0027??? I´d rather not to perform a S-off cause I never did it before...
I open the CMD and type fastboot oem_get_identifier_token and the result is : ... INFO(ERR) Command error!!!
I cannot get the token!
Click to expand...
Click to collapse
What do you get when you type: fastboot getvar all
I didn´t type this, untill now...
INFOversion: 0.5
INFOversion-bootloader: 2.00.0027
INFOversion-baseband: 26.14.52.27
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.161.5
INFOserialno: HT11CRX04531
INFOimei: I THINK YOU DON´t NEED THIS
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: VODAP102
INFObattery-status: good
INFObattery-voltage: 4191mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 743ca94a
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.026s
Download that UK hboot from HTC dev, start ruu, find in temp rom.zip (or boot.zip, something like that), rename it to PD98IMG.zip, put it on a goldcard, go in hboot and flash it.
Or you can download the whole rom here:
http://shipped-roms.com/index.php?category=android&model=Ace
And the steps are the same.
When you downgrade it with whole ROM just run ruu form htcdev. You don't have to do it with goldcard.
Here is what I did... I download the UK 3.13.161.3 from htcdev found it in temp folder rename it and put it on my sdcard, because I couldn´t find a tutorial how to make a goldcard. Then I went to bootloader and the phone asked me do I want to flash it i choosed yes and the phone restarted. Than I run the RUU but I got the ERROR (191) ROM IS NOT SUPPORTED
EDIT:
I noticed that my bootloader says nov LOCKED so I try again reading the token and I got it, but after pasting the token htcdev gave me following message:
Unlocking Bootloader Failed!
Sorry it didn't work out. Here's why:
Required Resources
Please make sure all items are installed and up to date.
We're sorry, but it appears your attempt to unlock the bootloader on this device has failed. This could be caused by several factors including simple errors in the entry of the unlock token, problems with your device, or a lack of manufacturer support for the unlocking process. Please see the specific error code listed below, and try again if necessary.
Error Code: Invalid Bootloader Token Length.
Error Reason: The submitted Token appears to be the wrong length and won't work.
Click to expand...
Click to collapse
You can install HTC Europe + it's world wide (but it's litle older):
http://shipped-roms.com/download.ph...60.29_26.14.04.28_M_release_225512_signed.exe
Or latest for europe (turkey version):
http://shipped-roms.com/download.ph...60.29_26.14.04.28_M_release_227499_signed.exe
In some thread I was read that even people from US install it.
Yes, whenever you downgradeing rom or hboot or whant to install rom whitch is not for your CID on locked hboot you have to use goldcard.
You get error 191 because you are trying to downgrade on locked hboot.
To make a goldcard:
http://www.addictivetips.com/mobile/how-to-make-gold-card-for-htc-desire-hd/
(4. Go to this page, enter the reverse CID)
Because this page not working here is new one:
http://huygens.hoxnet.com/goldcard.html
Thank you very much, I did it. I just put the ROM.zip found in the temp folder on my sd card, renamed. Then went to bootloader it asked me to whether to flash or not. and than I could get my token...

[Q] htc desire with revolutionary and s-off. uproot advice for

Hey guys I want to unroot my old desire, I have managed to put original ruu on but my hboot still says revolutionary and my hboot is 6.93 I tried downlaoding and running android flasher but it failed when writing the hboot that came with it. Does anyone know how to do it so I can have it locked with s-on?
I don't believe I have stock hboot and can't find a good link to one either.
Thanks
Use bortak's troubleshooting guide, stickied to the top of q&a
Point number [8]
eddiehk6 said:
Use bortak's troubleshooting guide, stickied to the top of q&a
Point number [8]
Click to expand...
Click to collapse
So if I follow this:
Visit Alpharev and download the "Downgrader"
[STEP2]- Flash the downgrader over fastboot. This can be done with Android Flasher, cmd, or fastboot commander (Note: android flasher is the
only program that does not require third party software such as Android SDK or Java JDK)
[STEP3]- You should now notice the title on the bootloader screen is "Alpharev Unlock", run the RUU again and you will have S-ON'd your device.
Am I right in saying it will change to s-on but it will also get rid of revolutionary at the top of the screen? Can I change that to locked after by using fastboot oem lock?
si_d_2003 said:
Am I right in saying it will change to s-on but it will also get rid of revolutionary at the top of the screen?
Click to expand...
Click to collapse
Yes
Can I change that to locked after by using fastboot oem lock?
Click to expand...
Click to collapse
No need
eddiehk6 said:
Yes
No need
Click to expand...
Click to collapse
I tried to run the ruu : RUU_Bravo_H3G_UK_1.22.771.1_Radio_32.36.00.28U_4.06.00.02_2_release_127568_signed and I get a HBoot version error and it exits the exe.
Is there any advice you could give me please?
This is my info:
c:\fastboot>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 0.93.0001
INFOversion-baseband: 5.09.05.30_2
INFOversion-cpld: None
INFOversion-microp: 051d
INFOversion-main: 2.10.405.2
INFOserialno:
INFOimei:
INFOproduct: bravo
INFOplatform: HBOOT-8x50
INFOmodelid: PB9920000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 4187mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-365c78d6
INFOhbootpreupdate: 11
all: Done!
finished. total time: 0.030s
si_d_2003 said:
1.22.771.1
Click to expand...
Click to collapse
si_d_2003 said:
INFOversion-main: 2.10.405.2
Click to expand...
Click to collapse
Ur version main is 2.10.405.2 the ruu ur trying is version 1.22.771.1 so u have to use a ruu with version main 2.10.405.2 or higher
In addition to the above, find and use the 2.3.3 GB RUU from shippedroms
If it fails to flash normally, flash it using the PB99IMG.zip method, point [7] from the same guide

Bought a new unlocked phone, been a while, what's next?

Greetings,
Would appreciate any help/direction. It's been a while since I bought a new phone to mess with, even longer since it was GSM.
Picked up a new unlocked HTC10, I want to get it updated to Oreo firmware and ready to go for US Carrier Ting (well, T-Mobile). Will probably run Leedroid's ROM, but may test others.
I have done HTCDev unlock and installed TWRP, what's next to get Oreo Firmware before flashing ROMs?
I'm also guessing I'll need to change the CID, and maybe the MID.
Download mode info:
*** UNLOCKED ***
htc_pmeuhl PVT S-ON
LK-1.0.0.0000
[email protected]
OpenDSP-v20.0.8996.00007_0809
OS-2.41.401.4
Jan 25 2017 , 18:33:04(857212)
fastboot getvar all
kernel: lk
product: htc_pmeuhl
version: 1.0
max-download-size: 1579200000
serialno:
current-slot:
imei:
version-main: 2.41.401.4
boot-mode: download
version-baseband: [email protected]
version-bootloader: 1.0.0.0000
mid: 2PS620000
cid: 11111111
Once again, thanks for any assistance.
Change your CID to HTC__034, after that flash this ruu in download mode, boot the device and check for the OTA oreo update.
https://androidfilehost.com/?fid=889964283620778317
Mr Hofs said:
Change your CID to HTC__034, after that flash this ruu in download mode, boot the device and check for the OTA oreo update.
https://androidfilehost.com/?fid=889964283620778317
Click to expand...
Click to collapse
Thanks for the info. Do I need to get S-OFF before I can change the CID?
Attempting to change it now results in: FAILED (remote: WRITE CID PERMISSION ERROR)
Also, the current CID is the "SuperCID" 11111111. Do I really need to change it?
Thanks again!
zisix said:
Thanks for the info. Do I need to get S-OFF before I can change the CID?
Attempting to change it now results in: FAILED (remote: WRITE CID PERMISSION ERROR)
Also, the current CID is the "SuperCID" 11111111. Do I really need to change it?
Thanks again!
Click to expand...
Click to collapse
I thought it was S-OFF (i know it says S-ON in your info though) because supercid like you have can only be written with S-OFF.
Try the ruu without changing the CID but it may fail due to incompatible CID. If that is so run the S-OFF sunshine tool just for fun to see if it has been used.
Mr Hofs said:
I thought it was S-OFF (i know it says S-ON in your info though) because supercid like you have can only be written with S-OFF.
Try the ruu without changing the CID but it may fail due to incompatible CID. If that is so run the S-OFF sunshine tool just for fun to see if it has been used.
Click to expand...
Click to collapse
That worked. Afterwards I installed TWRP again, then Leedroid.
All set now, thanks!

Categories

Resources