I used "[RELEASE][27/03/2011] ClockworkMod Recovery 3.0.2.4_r1" yesterday,After that, whenever I turn off the phone completely,It will automatically restart,why?
i've the same problem! i tried to change various roms...miui, CM7, froyo sense, ginger sense....but nothing....i'v tried to change recovery, with all 2.x and 3.x CWM.....nothing....tried to change radio....nothing....
can anyone tell us a solution if possible??
Also check this thread http://forum.xda-developers.com/showthread.php?t=1014302
Same problem
And here is a workaround for the problem http://forum.xda-developers.com/showpost.php?p=12517111&postcount=6 .
All credits go to http://forum.xda-developers.com/member.php?u=390098
Hello!
Noticed one thing. After flashing Rogue Kernel 1.1.3 I'm starting to get some strange trouble. As example, very often I'm loosing SD Card. It is working and then, suddenly I'm getting the message it is "Suddenly unmounted". May be because it is getting overheated. I noticed that too.
After I've flashed Stock kernels with CWM (EG30/EG31) it is working very good but buttons in CWM not working as it is supposed to work. As example, "Power" button not working at all.
Is it only me so lucky or somebody else have this problem too? Please, I need some advice or solution?
Help me, please?
Can somebody give me a link for CWM 5.0.27. Just for CWM? I've tried to find it but with no result.
I need your help, guys.
In 5.0.27 the power button is the back function and the home is the select function.
Hello all, I'm new to this forum and i got some questions, (I did research, but I haven't find answer for my Q).
Ok so I got installed custom ROM on .58 FW, and I want change baseband from -67 to -36. I went thru tutorial http://forum.xda-developers.com/showthread.php?t=1469473 I did everything exactly how its says in step by step guide. The problem is when phone boots it keep giving me wellcome screen, poping up msg what I dont have enough space for my SMS, and when I go into phones internal storage its nothing there, I mean it does not show how many free space left and how many used.
So my question is: ROM is not supported by this baseband because this ROM is based under BB -67 ? Or I need to do something else ?
I want have this baseband because sometimes when I use data internet on my phone it respond very slowly.. i.e. I browsing internet everything OK, then I switch off screen and turn it back on, then go into browser and press any link there, my phone shows what is sending data but not receiving, after some while everything comes back and working fine again.. It very anoing thing, and I want fix that somehow.. I had this problem before I started to do any flashing (I was with stock FW) and now after some flashing new ROMs and kernels I still having..
Any suggestions ?
[My phone] r800i
[ROM] max_power 1.0v by sechko
[Kernel] Doomlord v10 [2Ghz]
No solution guys ?
You may want to try re-formatting (called a factory reset in CWR)
Get to your bootloader and the option should be there to delete the data/cache partitions.
Note - you should backup, nandroid, etc before doing this.
Thanks for the post, I will try as soon as I get home, hope this will help.
sent from Xplay r800i [ROM] GB 2.3.7 max_power v1.0 by sechko, Doomlord kernel v10.
Strange things happen to my i9195... suddenly out of the blue,wifi won't turn on neither from quick settings panel nor the settings itself...
Everything else works as it should(data,bluetooth,airplane,gps,sound etc) but the wifi setting tries to turn on but immediately turns of. anyone had this problem?
and more important... a solution??????????
Which rom are you on? You could try reflashing a rom to clear any possible software issues
yes try reflash rom
Whosat said:
Which rom are you on? You could try reflashing a rom to clear any possible software issues
Click to expand...
Click to collapse
citymen34 said:
yes try reflash rom
Click to expand...
Click to collapse
thanks guys for your replies...
i was on stock rooted xxuamf4, i flashed both xxuamh3 and xxuamg8 (these two i had already downloaded) but problem remained. just to eliminate software issue , as a last resort i flashed CM 10.1.3 and magically my device was fully functional again( by the way ..:good: to CM...).
So WTF? i 'll try later to flash a stock non rooted fw and see what will happen...
p.s : anyone know how to change baseband? in my sgs3 mini i used to flash different modem for that. what works for this device?
p.s 2 : thanks again for your time guys!:good:
flashing back stock firmware , problem reappeared! it seems something has to do with knox , because every time i try to open wifi a toasted notification appears "prevention information... the device as detected...bla...bla...bla"
the thing is that if i root my phone and completely delete knox,knox agent,store and container agent, the notification stops but the wifi setting still cannot be enable.
any ideas????
flashing back stock firmware , problem reappeared! it seems something has to do with knox , because every time i try to open wifi a toasted notification appears "prevention information... the device as detected...bla...bla...bla"
the thing is that if i root my phone and completely delete knox,knox agent,store and container agent, the notification stops but the wifi setting still cannot be enable.
any ideas????
Back to report that re-rooting with arco's method but with rootkit v2 (that includes kernel) seems to solve the issue! the steps i follow was :
1) gain root
2) install cwm recovery
3) with es explorer delete knox store,knox agent, container agent (both apk and odex files)
4) reboot to cwm recovery
5) clear cache and davlik cache
6) reboot and RESURRECTION!!!:good:
WiFi and Modem Issue
hi guys. i'm sorry for asking my question here,i have i9192 & my wifi do not turn on. i flash various version of official rom, but i cant solve this problem. I flash (MH2 ,MF7 ,MF9 and MJ2...) build number & CSC are change but Baseband version remain constant and don't change.
how can i flash modem( NON_HLOS.bin)...?
i root my phone so many time with Rootkit v2 and do all wipes for clean flash... but no successive achieve
how can i repair my WiFi and Bluetooth?
tighoory said:
hi guys. i'm sorry for asking my question here,i have i9192 & my wifi do not turn on. i flash various version of official rom, but i cant solve this problem. I flash (MH2 ,MF7 ,MF9 and MJ2...) build number & CSC are change but Baseband version remain constant and don't change.
how can i flash modem( NON_HLOS.bin)...?
i root my phone so many time with Rootkit v2 and do all wipes for clean flash... but no successive achieve
how can i repair my WiFi and Bluetooth?
Click to expand...
Click to collapse
i think it's a kernel related issue. But first in order to eliminated hardware problem possibility, try to flash a cm rom. If your wifi and bluetooth works then you can be sure it's not a hardware failure. in my case flashing a different kernel solved the issue.
p.s : if you find a way to change baseband version ,please share the way!!!
tighoory said:
hi guys. i'm sorry for asking my question here,i have i9192 & my wifi do not turn on. i flash various version of official rom, but i cant solve this problem. I flash (MH2 ,MF7 ,MF9 and MJ2...) build number & CSC are change but Baseband version remain constant and don't change.
how can i flash modem( NON_HLOS.bin)...?
i root my phone so many time with Rootkit v2 and do all wipes for clean flash... but no successive achieve
how can i repair my WiFi and Bluetooth?
Click to expand...
Click to collapse
you need flash same version Kernal file, example: when you finished flash MH2 stock firmware, if wifi shotdown, just flash MH2's Kernal file, file size around 7MB
hey hi
even i have the same error while turning on wi-fi prevention information blah blah
can you be brief how did you solved dat issue. it ll be very helpful
saiprasadap92 said:
hey hi
even i have the same error while turning on wi-fi prevention information blah blah
can you be brief how did you solved dat issue. it ll be very helpful
Click to expand...
Click to collapse
the solution for me was more or less "flashing rooted arco's kernel" . but my model is 9195. i honestly don't know if there is one for 9192 ,but if i were you i would search for one!
vriz27 said:
the solution for me was more or less "flashing rooted arco's kernel" . but my model is 9195. i honestly don't know if there is one for 9192 ,but if i were you i would search for one!
Click to expand...
Click to collapse
yeah thanks fa the reply . ill search for my phone and if you get the same for my phone do let me know
I have problem whith my s4 mini.. I9192 dual sim
Baseband : Nd1
When i want to connectt to wifi i enter password.. As soon as i hit the connectt button wifi signal will desappear... I updated the frameware but no sucsess...
How to solve?
Is it hardware issue?
Same problem for me (1st post): new i9195 with latest XXUCNK1, never flashed before,
install twrp and make a backup, install CM-12.1 and CM-13 without any issue,
After restore to KK using my twrp backup I can't turn on wifi,
solution was to flash Modem_I9195XXUCNK1.tar from modem thread.
I notice that twrp doesn't restore previous modem I update to XXUCOL1
Hey guys, i just made an account just to see if there's any solutions or fixes to this problem i have. I flashed MJC 4.3 on my phone and i noticed that the Wifi wouldn't turn on, at first too i didn't have any signal so i flashed the modems that the thread has provided. I searched everywhere for a solution but i can't find one that works, i tried flashing another rom while fully factory restoring everything but no luck at all. Can anyone help me?
In the same thread there is a ATT unlocked kernel. Flash it along with that Rom.