Develop Bugs

The new SPL-3.03.0000 installed by the DOPOD WM6 Installer

Ok, talk about it here.
It just installed over my Olipro SPL and before I knew it, it said INVALID VENDOR ID.
Now I can't update to WM6 because of my SPL that is CID locked. I am however able to install an original ROM.
Questions (yet to be answered):
1) Is it possible to run SSPL?
2) Are we able to get Hard-SPL on it again.
If not;
3) Are we able to write a new SSPL that can hack this bootloader.
I don't even know whether it is locked, but I assume they did find out about our SSPL and Hard-SPL.

well i just flashed back to pdaviet's rom from the new WM6 (nothing very impressive about it). I just let the updater push sspl to my phone and it worked. haven't tried loading hard-spl yet.

After flashing to an original rom were you then able to update to WM6?

OK, When I got back in to WM5 i was able to get into SSPL again. It shows SPL-1.07.ds
But we will have to make sure we can rewrite it. I can't test it now, have to go to work. I will check it this afternoon.

OK, i think essentially what this new IPL/SPL does it overwrite your existing, restore any CID locks and vendor ID's as well.
If you have a Dopod branded device from the areas this release is for, you'll have no issues.
I was able to easily update using this rom, then run Olipro's hard SPL after to return to 1.20 Hard SPL

if you unpack D810_SEA_WM6_Upgrade_20070709.exe or RUU_Trinity_DOPODASIA_WWE_3.00.707.16_6275_1.46.30.11_108_Ship.exe with winrar you will see a SPL.nhb file that is the one thats being installed just delete it

TheBlackDragon said:
if you unpack D810_SEA_WM6_Upgrade_20070709.exe or RUU_Trinity_DOPODASIA_WWE_3.00.707.16_6275_1.46.30.11_108_Ship.exe with winrar you will see a SPL.nhb file that is the one thats being installed just delete it
Click to expand...
Click to collapse
already tried it, same stupid problem won't pass through 28%

TheBlackDragon said:
if you unpack D810_SEA_WM6_Upgrade_20070709.exe or RUU_Trinity_DOPODASIA_WWE_3.00.707.16_6275_1.46.30.11_108_Ship.exe with winrar you will see a SPL.nhb file that is the one thats being installed just delete it
Click to expand...
Click to collapse
did that but still same problem with 28%

have you flashed your bootloader back to a hard-spl or kept de original one

TheBlackDragon said:
have you flashed your bootloader back to a hard-spl or kept de original one
Click to expand...
Click to collapse
Tried it with hard-spl and sspl both gave the same result; stuck at 28%

even with "Des SSPL"

Me,too stuck at 28%

if you're putting a new post about getting stuck in the upgrade process (most ppl at 28%), can you please list the steps you took, what bootloader you were using (hard-spl, etc), and what your bootloader shows now...

solved
click here http://forum.xda-developers.com/showpost.php?p=1358479&postcount=132

Works For me
Nice, it worked for me

Still stuck at 28% even after using the CID unlocker

RayEarth said:
Still stuck at 28% even after using the CID unlocker
Click to expand...
Click to collapse
You need SuperCid and SSPL. sorry my engish.

I had the same issue stuck at 28% - I fell back to the last V5 WWE rom and run SSPL (latest Trin) before update to V6 again.

ethos said:
I had the same issue stuck at 28% - I fell back to the last V5 WWE rom and run SSPL (latest Trin) before update to V6 again.
Click to expand...
Click to collapse
You need NEW supercid. Я сам с этими проблемами столкнулся. i dont know this for english.

I had OliPro SPl befor upgrading and have upgraded without any problem. Just run RUU and followed instructions.
I have an idea.
1. RUU flashed SPL 3.03 (so at that moment my phone became cid locked)
2.Probably my phone have the same cid as that ANZ rom. That's why i had no problems.
So all your problems are in new SPL and new logic for flashing device.
for flash new rom you should
1. unpack nbh file
2. use nbhgen to create new nbh with OS/RADIO/EXTROM/IPL only. WITHOUT SPL
3. use SSPL or hardSPL for flash this new nbh
4. enjoy

Help!! - Can't Upgrade anything on my Diamond

Hello to anyone who can help me...
i am posting this thread after searching this forum for answers to my problem, and i could not find the answers...
I have the Diamond (DIAM100) with Original SPL 1.37.000 and GER Stock Rom installed.
My Upgrade goal is HardSPL 1.38 Signed (Olinex) / DiamondProject V2 GER / radio .05
I try to upgrade SPL, Radio and Rom according to several guides in this forum, but nothing seems to work for me.
I tried using the RUU Program with HardSPL, tried Diamond CustomRUU, tried manual Bootloader access, everytime the Upgrade Software stays at 0% (on the phone also) and after about 5 minutes i get ERROR [262].
Luckily, i haven't bricked my diamond yet, it always came back to life again.
i can confirm, that the device enters bootloader mode, then changes to grey screen with progress bar. But that is all.
Maybe it is a Vista issue, maybe not.
But all i get is ERROR [262]: Update Error
Suggestions, anyone?
Thanks in advance for any serious help...
______________________________________
HTC TD DIAM100
MDA Compact I (Magician, unmodified)
MDA VarioII (Hermes, running Schaps 3.54GER, thanks Schaps great ROM)

I get EXACTLY the same... i've tried everything (except a hammer) to fix it.
I'm running
Rom: 1.37.707.1 wwe
Radio: 1.00.25.03
Proto: 52.26a.25.09h
I'm also using Vista 32
(all fresh out of the HTC box)

http://forum.xda-developers.com/showthread.php?p=2338991

Are you running Vista X64 coz i had the same error in it ..

try to flash it with xp!

udayrulz said:
Are you running Vista X64 coz i had the same error in it ..
Click to expand...
Click to collapse
... Running Vista Ultimate 32bit, but not sure if that will make a difference...
I will try to get hands on XP computer tonite....

You can always try running the RUU update utility in WinXP32 compat mode.

What Hard SPL ar eyou using???.... usually the problem...
you will need Developer edition if the ROM is not signed.

developer edition worked for me on Vista 32. Thanks guys!

OK
I ran a Hard-SPL (from the dev thread) Diamond-OliNex
This completed and did whatever it did and i had to do the basic setup on the phone again.
I have now got the radio ending .06 from this thread this thread and cant get it to work with the OilNex Hard SPL or the 1.34 listed in that thread.
I'm back to square one where Error 262 Update error is occuring.
I'm tring to flash the radio as the O/S i have appears to be running sweet but its having web issues that appear to be DNS/Connection related.
This needs an idiots guide like the other phones have .... 'coz i'm an idiot and I can't do it.

Monty Burns said:
OK
I ran a Hard-SPL (from the dev thread) Diamond-OliNex
This completed and did whatever it did and i had to do the basic setup on the phone again.
I have now got the radio ending .06 from this thread this thread and cant get it to work with the OilNex Hard SPL or the 1.34 listed in that thread.
I'm back to square one where Error 262 Update error is occuring.
I'm tring to flash the radio as the O/S i have appears to be running sweet but its having web issues that appear to be DNS/Connection related.
This needs an idiots guide like the other phones have .... 'coz i'm an idiot and I can't do it.
Click to expand...
Click to collapse
Yeah, but for me the problem still is to get ANY HardSPL on the Diamond in the first place.
I was trying to put HardSPL 1.38_Signed to the phone...
Adwinp: thanks for the advice, but did not work either...
As far as i can tell, this may be a problem with the USB driver from the Windows mobility center software...
I will try on real XP and give you feedback tomorrow.
thanks guys.

Doctor_Who said:
...
I was trying to put HardSPL 1.38_Signed to the phone...
...
Click to expand...
Click to collapse
The developer edition i.e. unsigned worked for me.
I am currently going through the stages in the wiki VERY closely. Dont know if they will work :/

Doctor_Who said:
Hello to anyone who can help me...
i am posting this thread after searching this forum for answers to my problem, and i could not find the answers...
I have the Diamond (DIAM100) with Original SPL 1.37.000 and GER Stock Rom installed.
My Upgrade goal is HardSPL 1.38 Signed (Olinex) / DiamondProject V2 GER / radio .05
I try to upgrade SPL, Radio and Rom according to several guides in this forum, but nothing seems to work for me.
I tried using the RUU Program with HardSPL, tried Diamond CustomRUU, tried manual Bootloader access, everytime the Upgrade Software stays at 0% (on the phone also) and after about 5 minutes i get ERROR [262].
Luckily, i haven't bricked my diamond yet, it always came back to life again.
i can confirm, that the device enters bootloader mode, then changes to grey screen with progress bar. But that is all.
Maybe it is a Vista issue, maybe not.
But all i get is ERROR [262]: Update Error
Suggestions, anyone?
Thanks in advance for any serious help...
______________________________________
HTC TD DIAM100
MDA Compact I (Magician, unmodified)
MDA VarioII (Hermes, running Schaps 3.54GER, thanks Schaps great ROM)
Click to expand...
Click to collapse
I had the exact same problems. I tried every possible combination of Hard SPL and ROMs. Here is what worked for me in the end (no problems since):
1. install newest .Net 3.5 on windows PC (don't know if this has anything to do with my problems but after installing everything started working fine)
2. install Unsigned HardSPL (developer edition): http://forum.xda-developers.com/showthread.php?t=400950
3. install chosen ROM / Radio ROM with RUU (Rom Updater Utility): http://forum.xda-developers.com/showthread.php?t=396073
After flashing a ROM the device makes a hard reset so you should backup your data first! http://forum.xda-developers.com/showthread.php?t=299705
good luck!

Finally it worked, also thanks to all who replied in this thread.
So i like to share my experience in this:
1. first i downloaded all SPL and Radio i could find, then i looked for GER language Rom. Quickly decided for DPT V2.
2. First attempt to flash failed completely on a Vista PC (32 Bit Ultimate)
3. Back home, moved all the downloaded files to my XP SP2 PC..
4. Noticed: DiamondCustomRUU would not start in XP, got error message saying "... could not be initialized", so i tried the standard RUU instead, with the shortcut of manually putting the PDA into Bootloader mode...
5. Sucessfully flashed HardSPL 1.38 on the Diamond, and the device rebooted with Hard reset.
6. Next i tried to upgrade Radio to .05 Version... Failed, stuck a 0%
7. Changed SPL to 1.40 (Unsigned), now the Radio could be flashed. Seems that Radio Files are Unsigned?
8. Flashed DPT V2. Success.
But still wondered about the unsigned Radio file...
Again, thank you all
-------------

Upgrading possible this way or not?

First of all, I have studied quite some threads about flashing the Diamond in the past days, read the stickies and gone through the pages at modmydiamond.
I now set the following plan, and I would really love to have some confirmation before I break something
If I understand it correctly the procedure is like this:
- flash Hard-SPL signed/unsigned
- optionally update radio ROM
- flash desired operating system ROM.
The following is the case: I have a sim-unlocked (from factory) T-Mobile MDA Compact IV, a DIAM200 with the Dutch 1.37.114.3 ROM, accompanied by the 1.37.0000 SPL. The installed ROM is heavily branded by T-Mobile, and I want to install the non-branded HTC 1.93 Dutch one.
As a preparation I downloaded the signed Hard-SPL 1.30 from this thread, and installed it, and verified it was installed.
Since I wanted to install the non-branded HTC ROM I grabbed RUU_Diamond_HTC_NLD_1.93.404.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe file from here and tried to install it but no success: it got stuck at 0%. (Doesn't that mean that it won't flash unsigned ROM at signed (S)SPL?) What I want to do now is install the 1.40 Hard-SPL unsigned and attempt to install the HTC ROM again.
Now my question is: can I do this safely without transforming my device into an expensive paperweight? Thanks for reading

Hello
I found a simple way for flashing.
Have a look here : http://forum.xda-developers.com/showthread.php?t=423978&page=2

I took the gamble and succeeded. This is how I did it:
- Flashed Hard-SPL 1.40 unsigned using the utility
- Extracted the nbf from the downloaded exe file (Dutch official HTC ROM) using NBHUtil 0.92, see http://forum.xda-developers.com/showthread.php?t=409425
- Joined the OS & Splash together, leaving out the SPL and Radio ROMS, made sure the CID and Model ID were correct (see that thread)
- Flashed it with the RUU the Dutch ROM came with.
...
- Profit.

If you want only the original HTC rom, you can install it by the original update software provided by HTC.
Simply connect your Diamond through USB / active sync and luch the update utility.
You can find last 1.93 here : http://www.files.to/get/342564/gn2jg25lvr
Good luck

Well in my case the combination of Hard-SPL 1.30 and the official HTC 1.93 updater wouldn't let me update the phone's software: I got stuck at 0%. Further inspection of the nbh file showed me it was aimed at DIAM10000. I am not sure if that made the difference or that the Hard-SPL blocked the flash, can't tell.
btw dominique2222, the file you linked in post #4 seems to be a German (GER) file, not Dutch (NLD)

spone1 said:
I took the gamble and succeeded. This is how I did it:
- Flashed Hard-SPL 1.40 unsigned using the utility
- Extracted the nbf from the downloaded exe file (Dutch official HTC ROM) using NBHUtil 0.92, see http://forum.xda-developers.com/showthread.php?t=409425
- Joined the OS & Splash together, leaving out the SPL and Radio ROMS, made sure the CID and Model ID were correct (see that thread)
- Flashed it with the RUU the Dutch ROM came with.
...
- Profit.
Click to expand...
Click to collapse
Finally a guy who persueded me to go and do it
Thanks your hits helped me out and now I have a real Diamond.
BTW how about the hard buttons? I recall that they are swapped between MDA Compact IV and HTC Diamond ?

The hard buttons will work fine, in case you didn't find that out already

spone1 said:
The hard buttons will work fine, in case you didn't find that out already
Click to expand...
Click to collapse
Yep I noticed its all OK and I was actually surprised but the position ( as it looks ) does not care the keyboard matrix address appearently is fixing this

Problem to hardSPL on stock SPL 2.03 . anyone??

I have ha diamond P3700 with the latest stock rom 2.03xxxNOR (norwegian) ,
Together with this upgrade came the SPL 2.03
I have tried a million times to put HardSPL both from Olinex and the 1.24 , The same problem happens all the time. The phone sync with active sync , can flash original HTC rom , but with any of the hardSPL the phone disconnects after turning black and after a few minutes I get the error message 260 , the phone is not connected. The PC cant recognize the USB device before this happenes.
I`ve tried to run SSPL manually, i`ve tried 4 computers and different USB.
For me it seems like the new SPL 2.03 blockes any attempt of putting something non-stock on my phone Anyway to bypass this???

Hello,
When I bought my Diamond I upgraded it from 1.93PTG to 2.03PTG.
Although, I prefer English interface. So, I hard-spl'd it with OliPro's but I still couldn't flash the 2.03 Europe one.
So, after searching, I found a Hard-SPL 1.24 (followed the instructions) and everything went fine...
Maybe you should try this one also...
Hard-SPL post:
http://forum.xda-developers.com/showthread.php?t=408621&highlight=hard+spl
Best regards,
Nuno

I had the stock NOR 2.03 rom too, and flashed with no problems using Olinex unsigned hardspl 1.40.
Using a WM 6.5 ROM atm, and everything works well

probleme with flashing hardSPL olinex

I've got a Diamond from orange(Diam100) and I want to flash it with a new fra rom; I have tried HardSPL 1.40/1.93 OliNex, using the RUU, and by loading the device into the bootloader manually from USB, using the Diamond-sspl.exe, but it blocked at "Loading...", "0%" and nothing at all. I can't figure out what i's wrong!
the original on is : spl-1.37.0000

i found some one did use SSPL and he had the same problem diam100 orange spl 1.37
but i don't know how i can do it ????