Develop Bugs

[solved] Radio_V2 failure

Ok, I bought this phone from market in June means that I am not bound to any operator or carrier. I have Hboot 0.92 and radio 5.09.05.30_2
I have rooted this phone long time before, and because of rooting, I couldn't update my phone when phone checks for operating system updates periodically.
Now I tried to update my phone to latest available ROM here (Froyo (2.09.405.8) update - Windows not required). I renamed and copied the zip file in formatted card (only that .zip file in whole card) and tried to update my phone.
Everything seems to go fine but they went down the hill when RADIO_V2 starts to update. I get this error.
RADIO_V2 - Fail-PU
...
...
Partition update fail!
Update fail!
Now since the update is failure so I can't use my phone now. If I normal restart it then phone just hangs on HTC logo with 7 vibrations
Any suggestions?

Ok, now I have new problem:
Now I get either a white screen (as below) where neither of the buttons seem to work or a black screen with HTC logo in the middle with exclamation marks in the four corners of the screen.
**Screenshot is attached in the post because I can't use external URL due to account restrictions for new account.**

Going to have to bite the bullet and run an RUU...get it here:
http://shipped-roms.com/shipped/Bra...00.32U_5.09.05.30_2_release_142828_signed.exe
Boot into FASTBOOT (hold back button and press power) and once connected via USB (FASTBOOT USB on screen) run the RUU...should get you back to normal, albeit with wiped data

Thanks Eddie for your reply.
I tried this but the green update bar gets an exclaimation sign, and I see Error 110. I have downloaded this file many times in case if I have corrupt download problem.

anyone? or is my phone dead?
Edit: solved the problem..thanks everyone

Hi, can you please detail how you got the phone back to life?
Thanks!

If you've fixed the issue you need to let people know how you did it so future issues can be resolved for other users...

Hi, I have exactly the same issue and am wondering how you managed to fix it! Please let us know

oombongo said:
anyone? or is my phone dead?
Edit: solved the problem..thanks everyone
Click to expand...
Click to collapse
Hi,
I have the same issue , how did you fix it ??
Anyone??? please help ...

i hate it when people just make the questions just to do their job.
as long as you made it work you should post the steps to help others in similar conditions as you were.
think about it cause this is a community. we don't expect from HTC or others to help us but WE do expect from eachother!!!

sorry for my late reply. I wasn't visiting this forum and Internet much due to some problems in life.
Ok, here is what I did:
1. You MUST, MUST and MUST use x86 operating system. If you are using 64-bit then you are screwed.
2. Install HTC Sync but close the sync program from taskbar before you start to use RUU. HTC Sync has drivers which you need so you have no other choice but to install it.
Hopefully it helps

1. Not true, I've got Windows 7 x64 and can run RUUs without issues

I have Windows 2008 RC2 x64 and I had problems with it. The phone wouldn't update. The update progress bar was stopping at 70% or something

Might be an issue with the Server version...

Thanks! I'll try that...

I recently had a problem with a very new Desire on Orange UK - PVT4 - S-ON, hboot 0.93. I didnt have an orange sim and wanted to use my O2 sim. The sim worked when unlocked (my wife paid for an unlock code), but the wifi and data simply wouldnt work (seems to be a common problem)
Basically, I tried to write a new rom but kept digging myself deeper and deeper into a big black hole of bricked phone...
Eventually, after unsuccessfully trying to root, unlock, use a goldcard, use unrevoked 3 and downgrade to android 2.1 I ended up with a black screen with exclamation marks in each corner. I could only use RUU exe files to flash, so I started flashing random ROMS.
Each time it would fail with the green status bar flashing red, the phone vibrating and when it finally failed, I'd unplug the USB and see the screen saying it'd failed at step 2.
I looked for the most recent ROM I could find, and came across this one:
www dot mediafire dot com/?bbb7m2b4t5jejhm (i cant post external links)
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
It worked! I now have a totally unbranded froyo, with newer radio and still have S-ON (which seems to be impossible!) and all my data (wifi + cellular) works fine
I really dont know what I did to get to this point, but everything I did failed. I'm hoping that this post might help someone with a newer Orange UK branded Desire, but since I'm writing it all down a couple of days after I fixed it, i'm not sure how helpful it will be!
At least the wife's happy now she has her new phone working (and i can go back to my simple world of HD2 + wp7 + nandroid)

i did same but no luck
check
http://forum.xda-developers.com/showthread.php?t=1000385&page=10
please help me.
P.S : Sorry, i know this is old thread.

any other sollution!!
i tried this but no luck
i've same problem withHTC from Orange UK also but didn't work for me
radio_v2 fail-pu
thx
j0ff said:
I recently had a problem with a very new Desire on Orange UK - PVT4 - S-ON, hboot 0.93. I didnt have an orange sim and wanted to use my O2 sim. The sim worked when unlocked (my wife paid for an unlock code), but the wifi and data simply wouldnt work (seems to be a common problem)
Basically, I tried to write a new rom but kept digging myself deeper and deeper into a big black hole of bricked phone...
Eventually, after unsuccessfully trying to root, unlock, use a goldcard, use unrevoked 3 and downgrade to android 2.1 I ended up with a black screen with exclamation marks in each corner. I could only use RUU exe files to flash, so I started flashing random ROMS.
Each time it would fail with the green status bar flashing red, the phone vibrating and when it finally failed, I'd unplug the USB and see the screen saying it'd failed at step 2.
I looked for the most recent ROM I could find, and came across this one:
www dot mediafire dot com/?bbb7m2b4t5jejhm (i cant post external links)
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
It worked! I now have a totally unbranded froyo, with newer radio and still have S-ON (which seems to be impossible!) and all my data (wifi + cellular) works fine
I really dont know what I did to get to this point, but everything I did failed. I'm hoping that this post might help someone with a newer Orange UK branded Desire, but since I'm writing it all down a couple of days after I fixed it, i'm not sure how helpful it will be!
At least the wife's happy now she has her new phone working (and i can go back to my simple world of HD2 + wp7 + nandroid)
Click to expand...
Click to collapse

[Q] "Main version is older"-Rom 2.15.118.1 -How to beat it ?

It is an brand Desire, I rooted, I loaded custom rom (worked fine), but the ROM manager screwed up something. I guess, it reflashed the bootloader (or recovery?), but failed.
Now the desire cannot boot. It stucked at the screen, with logo.
The bootloader says :
BRAVO PVT3 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.10.05.23
If I try to go to RECOVERY the screen goes white, and nothing happens.
If I put the PB99IMG.zip to SD card, the HBOOT finds it, but says, "Main version is older"
Is any way to reFlash the rom ?
What to do ?

have your tried installing a RUU then restarting all over again?

Yep, I tried, in USB_HBoot and USB_FastBoot mode (only available for me) but I`v got error (152 or 170).
Should I use some specific version RUU ?

U should read all NEwbie Threads more carefully again and again ! If u do this nothing can go wrong !U have to easily reflash the recovery! Just use Google!

xtcislove said:
U should read all NEwbie Threads more carefully again and again ! If u do this nothing can go wrong !U have to easily reflash the recovery! Just use Google!
Click to expand...
Click to collapse
From that I read, to make reflash the recovery You need a loaded sytem.
This is what I do not have
xtcislove said:
Just use Google!
Click to expand...
Click to collapse
Or I'm wrong... - Then please help me

Have you tried
fastboot flash recovery "recovery file name".img
Click to expand...
Click to collapse
while in bootloader mode?
*note* you will have to download the android sdk, copy the recovery image into the tools folder, start cmd in tools folder and then type that command in.

Yes, I know sdk - already tried - I get protection error, not flashed.

h3llb3nd4 said:
Have you tried
while in bootloader mode?
*note* you will have to download the android sdk, copy the recovery image into the tools folder, start cmd in tools folder and then type that command in.
Click to expand...
Click to collapse
He has S-on. That will not work.
I think you need to try and find a rom which contains your HBOOT and try and flash that.
Sent from my Amiga 500 using Workbench

Right my bad
anyway, have you tried other PB99IMG.zips ?
find more here
http://shipped-roms.com/download.ph...00.28U_4.06.00.02_2_release_126175_signed.exe

http://forum.xda-developers.com/showthread.php?t=768256

excogitation said:
http://forum.xda-developers.com/showthread.php?t=768256
Click to expand...
Click to collapse
As I wrote before: "I am not able to fully load the sytem"

For me it sounds like recovery did not successfully flash from unrevoked - but how can I unscrew this ?!?
Now, I launched successfully RUU under USB_Fastboot !
But I tried a number of stock images-roms (with GoldCard - my phone is brand one) and each time I get error :
140:BOOTLOADER VERSION ERROR - on Desire screen : "Main Version is older"
My rom version: 2.15.118.1
What can be done ??? How to beat it ?

Sorry for the previous inappropriate answer.
So if you can still boot to hboot just install the drivers from here
http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
assumed you're running Windows and then root using:
http://unrevoked.com/#desire
After that you can install basically whatever you want (don't install stuff not matching your phone though) from the recovery
menu.
Good luck

excogitation said:
Sorry for the previous inappropriate answer.
So if you can still boot to hboot just install the drivers from here
http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
assumed you're running Windows and then root using:
http://unrevoked.com/#desire
After that you can install basically whatever you want (don't install stuff not matching your phone though) from the recovery
menu.
Good luck
Click to expand...
Click to collapse
Unfortunately I am not able to use Recovery option :
As I wrote:
"If I try to go to RECOVERY I see logo for 2 sec., after screen goes black and nothing happens (The compters sees the Android USB Devices-My HTC)."
Any other ideas ?????

You've been told what to do on Androidforums so I'd suggest following that

You mean this :
You have a bit of a problem then. You could try a branded update with a higher release number (e.g. Three's froyo), and then downgrade that.
But I can not find update with higher rel. than 2.15.118.1

pawel_kd said:
Unfortunately I am not able to use Recovery option :
As I wrote:
"If I try to go to RECOVERY I see logo for 2 sec., after screen goes black and nothing happens (The compters sees the Android USB Devices-My HTC)."
Any other ideas ?????
Click to expand...
Click to collapse
Hi! I'm a new member and this is my first post !!!
When the screen goes black, did you try to hold the volume up button when pressing the power button. May be ...
pawel_kd said:
For me it sounds like recovery did not successfully flash from unrevoked - but how can I unscrew this ?!?
Click to expand...
Click to collapse
I think the same happened to me when i tried to unlock my Desire. I juste had te redo it until it worked.

I made a little progress - I have access to recovery, then I press VolUp+Power there is op screen:
E:/Can`t open /cache/recovery/command
I tried fake-recovery but its impossible to flash-error - flash aborted.
Can I do something now and maybe and solve my problem?

So, I give up
I`m sending the phone to an authorized service.
We'll see - warranty success or not (
Thanx 2ever1 for time and help

Give it another try, may be...
Sorry mate! Didn't read your answer till now. Did you try other RUUs. There's a bunch of them in that URL: shipped roms (it is somewhere in the forum juste search it) for Bravo.
For me, to upgrade from the stock "Eclair", i used this one "RUU_Bravo_Froyo_HTC_WWE_2.10.405.2_R_Radio_32.44.00.32U_5.09.05.30_2_release_142828_signed" and it worked just fine (before that i upgraded via stock zip to froyo but the unrevoked didn't work). Then i re used the unrevoked3 and it worked in third attempt.
I guess, there was a problem in the way the phone handels the transfer of data (USB dosen't act quick enough to send the right amount of data). So the first time when my phone bouted up, it couldn't get all data from the unrevoket script at the right speed so it continued booting with the old version of recovery prog without routing.
After it worked, i upgraded my radio to the "32.48.00.32U_5.11.05.14" via recovery and zip (found somewhere in the forum) and it was ok.
At least give it another try. It's all yours.

[Q] evo wont boot and RUU fails with error

I tried one of the rooting processes today and it didn't work. Now when I turn my Evo on it goes no further than the white HTC screen that you get when you turn it on. When I try to run the RUU it gets a connection error and won't go through. Can someone please help?

Robes1 said:
I tried one of the rooting processes today and it didn't work. Now when I turn my Evo on it goes no further than the white HTC screen that you get when you turn it on. When I try to run the RUU it gets a connection error and won't go through. Can someone please help?
Click to expand...
Click to collapse
If you pull the battery can you get to the bootloader screen? (hold volume down and power button when turning on)

You should be able to do what Greenfieldan suggests. It is possible to work through this issue, so don't fear but it make take a few tries.

Greenfieldan said:
If you pull the battery can you get to the bootloader screen? (hold volume down and power button when turning on)
Click to expand...
Click to collapse
once I get to this screen how do I get the RUU to connect to the phone? I've tried it several times from this screen and nothing is working.

Robes1 said:
once I get to this screen how do I get the RUU to connect to the phone? I've tried it several times from this screen and nothing is working.
Click to expand...
Click to collapse
Thread stalking is fun, I see which thread you are reading, but you may have to reset you phone.
Do you either:
Have a recovery installed (if you aren't sure, then you may not)
have a PCIMG36 on the root of your sdcard, (if you aren't sure then you may not)

Robes1 said:
once I get to this screen how do I get the RUU to connect to the phone? I've tried it several times from this screen and nothing is working.
Click to expand...
Click to collapse
Go in to fastboot and you should see something toward the top that says "FASTBOOT USB", once there run the RUU

SnoopDawg said:
Thread stalking is fun, I see which thread you are reading, but you may have to reset you phone.
Do you either:
Have a recovery installed (if you aren't sure, then you may not)
have a PCIMG36 on the root of your sdcard, (if you aren't sure then you may not)
Click to expand...
Click to collapse
I have a pc36img file on the root of my sd card. It says that it can't open it when i select flash zip from sd card.

Just download the actual ruu from http://forum.xda-developers.com/showthread.php?t=884060. It will be one of the .exe files same version of you had on the phone will prolly work best. Then do what xhausx said and run the ruu file once there. Thanks xhausx btw cause i was confused too.

aclearersky said:
Just download the actual ruu from http://forum.xda-developers.com/showthread.php?t=884060. It will be one of the .exe files same version of you had on the phone will prolly work best. Then do what xhausx said and run the ruu file once there. Thanks xhausx btw cause i was confused too.
Click to expand...
Click to collapse
or download an unrooted version of your software in pc36img.zip format and boot into the bootloader and it will restore your phone to stock if you cant run any ruu

Need Help
I know this is an old thread, but I'm working on an old phone. Hopefully some of you guys are still following this.
My father has an EVO 3D that showed up one day stuck on the white HTC screen. The only remedy was to pull the battery. I thought it would be no big deal to just go into the boot menu and either try and run recovery, or at worst do a factory reset. Both of these options failed. I even made a few attempts at trying from the SD card with a ROM or two. So I downloaded the RUU direct from HTC thinking that would finally take care of the problem. But after connecting up in FASTBOOT mode and running the RUU, it eventually fails when the update gets to the point that it's supposed to restart the phone in bootloader mode. Because at that point the phone just restarts to the white HTC logo again, and the software times out telling me that it can't connect to the device. Any help here other than passing me a trash can Thanks in advance!

[Q] HELP: Flashing with S-ON

Hello
First off: I'm not an D Inc user myself (i'm an x10) but I am trying to fix a friends verizon dInc
Second: I have tried searching for hours(plus yesterday) and have not come up with a solution.
My problem: The phone was in a bootloop that was stuck in the HTC Incredible splash screen.
Research/Tried Methods:
- I have tried hboot: it is version .92 and radio is 2.0.15 S-ON
- I have used doug piston's original BP31IMG stock rom on hboot
- Have tried RUU but won't recognize the device at all because i can't really turn the phone on
- Have tried to flash CWM recovery 2.5 and 3.0 but its just stuck on "Checking BP31IMG.zip" using hboot and still nada ( Could i be using the wrong files? )
-hboot problem: Phone finds the BP31IMG.zip checks, parses, and asks me to "Update" --> i press vol+ to yes...
I then see a blue dot on [1]Bootloader then quickly after BLACKSCREEN
The phone doesnt boot after that. I've tried it multiple times but to no avail.
Can anyone please point me to the proper steps.
Thank you very much!
-

From past experience, I know that you can use the RUU in hboot. If you haven't yet, give that a whirl.

just attempted your pointer
But now that i boot into hboot, the setup from where it left off is continuing.
EXCEPT: Radio_V2 FAILED...this doesn't sound good but scared to stop the setup
EDIT: Said Partition Update Failed

Perhaps try pulling the battery and retrying. After just throwing my own phone into hboot, I realized that it was actually fastboot that I meant to say works (first option in hboot). But if not that, I'd say something is fried. Did your friend mess up a radio update because thats a sure way to brick a phone.
Edit: After a little googling, here is something a person with a desire said fixed it for them.
http://forum.xda-developers.com/showthread.php?t=767749

KyleBS said:
Perhaps try pulling the battery and retrying. After just throwing my own phone into hboot, I realized that it was actually fastboot that I meant to say works (first option in hboot). But if not that, I'd say something is fried. Did your friend mess up a radio update because thats a sure way to brick a phone.
Edit: After a little googling, here is something a person with a desire said fixed it for them.
http://forum.xda-developers.com/showthread.php?t=767749
Click to expand...
Click to collapse
That won't work fastboot option only allow you to reboot on the Dinc...Make sure that the Pb31Img is @176mb and it should ask you to update after it reads the file

yup im sure its @176MB from doug pistons site
it did ask me to update..everything worked except radio_v2 which failed
rendering the whole update a fail
and now it wont even boot hboot :'(

HTC DESIRE unroot with RUU 2.3.3 failed

Hi guys.
I know there are several posts already opened about this, but I`ve tried all I read there and nothing worked.
I wanted to send my rooted Desire back for repairs(camera LED broken thanks to a Torch app), and wanted to unroot it before I do.
I`ve read on some posts that u can unroot the phone by running the official Gingerbread 2.3.3 RUU found on htcdev.com (the official RUU), so I downloaded the RUU, installed hTC Sync, installed the Desire`s USB drivers(the same one`s that are required when rooting with Revolutionary).
The RUU started installing, the phone rebooted into the HTC splash screen and the "update" of the RUU started going, both PC and phone showed the cursor of the installing process, and at about 90% the PC gave me an error (update error).
I`ve tried again and again to run the RUU but everytime, it failed. And now, my Desire just won`t boot. I`ve taken the battery out, put it back, turned it on, and the only thing that appers on the screen is the white HTC logo on a black background, with 4 icons in each corner of the screen(looks just like the icon that appears when u plug in the usb cable with USB debugging mode ON).
Volume-down+Power and BACK+Power don`t work anymore, even though I press them, the phone just simply ignores the keys and takes me back to the before mentioned hTC splash screen.
I know this is probably something I did wrong, but if there`s any one kind enough to help me out with this, I`d deeply appreciate it.
Thank you!

i_cs_u said:
Hi guys.
I know there are several posts already opened about this, but I`ve tried all I read there and nothing worked.
I wanted to send my rooted Desire back for repairs(camera LED broken thanks to a Torch app), and wanted to unroot it before I do.
I`ve read on some posts that u can unroot the phone by running the official Gingerbread 2.3.3 RUU found on htcdev.com (the official RUU), so I downloaded the RUU, installed hTC Sync, installed the Desire`s USB drivers(the same one`s that are required when rooting with Revolutionary).
The RUU started installing, the phone rebooted into the HTC splash screen and the "update" of the RUU started going, both PC and phone showed the cursor of the installing process, and at about 90% the PC gave me an error (update error).
I`ve tried again and again to run the RUU but everytime, it failed. And now, my Desire just won`t boot. I`ve taken the battery out, put it back, turned it on, and the only thing that appers on the screen is the white HTC logo on a black background, with 4 icons in each corner of the screen(looks just like the icon that appears when u plug in the usb cable with USB debugging mode ON).
Volume-down+Power and BACK+Power don`t work anymore, even though I press them, the phone just simply ignores the keys and takes me back to the before mentioned hTC splash screen.
I know this is probably something I did wrong, but if there`s any one kind enough to help me out with this, I`d deeply appreciate it.
Thank you!
Click to expand...
Click to collapse
plug the phone in then turn it on, tell us what it says

bortak said:
plug the phone in then turn it on, tell us what it says
Click to expand...
Click to collapse
It doesn`t say anything.
This is what I do:
1. Take the battery out.
2. Put the battery back in place
3. Try turning phone on using: Volume-down+Power -> the phone doesn`t show anything, it simply takes me to the HTC logo(white HTC logo on black background. It does the same thing if I turn it on using BACK+Power)
If I try running the RUU again, the installer gives me the next message: Error[152]: image update error.
From what I`ve read, this is a radio error which can only be fixed by hTC. Could that be true?
Also, after the RUU gives me the above error, if I unplug the USB cable, the phone shows following:
*************
RUU
Radio_V2 - OK
Splash1 - OK
Recovery - OK
Splash2 - OK
Radio_cust - OK
Bootloader - Bypassed
Userdata - OK
System - Fail-PU
Boot - OK
Partition update fail!
Update fail!
*************
I have the Alpharev CM7 r2 bootloader.

even if it is its covered by htc warranty so don't worry about it

I don`t think it coveres it, as the Alpharev CM7 R2 bootloader still shows.

i_cs_u said:
I don`t think it coveres it, as the Alpharev CM7 R2 bootloader still shows.
Click to expand...
Click to collapse
oh you're still S-OFF?
You're automatically in fastboot when you turn on since your phone is like that so just turn it on, plug it in first flash this and then flash this, Then run the RUU again.

Yes, I`m still S-OFF.
How do I flash them if I can`t access recovery using Volume-down+Power or BACK+Power?
I`ve downloaded the first one, renamed it into PB99IMG.zip, put it on root of SD CARD, turned phone ON and it takes me to the same htc logo screen as before.
LE
Tried with Android Flasher, but it gets stuck when trying to flash the bravo_alphaspl.img that u`ve given me.
So basically, I can`t enter Clockworkmod, I can`t enter the bootloader menu by turning on phone usine Volume-down+Power / Back+Power, and the phone is stuck in the HTC logo, while still S-OFF-ed, also the 2.3.3 official RUU gives me the error at the end of the installing process.
Does anyone have any idea what I could do?

Bortak, one million thanks for the help, patience and the time you`ve wasted.
I managed to pull it off in the end.
My desire lives again
And hey, if ever in Romania, let met know, got a couple of beer cases with your name on them
Thanks again, dude!
Peace.

i_cs_u said:
Bortak, one million thanks for the help, patience and the time you`ve wasted.
I managed to pull it off in the end.
My desire lives again
And hey, if ever in Romania, let met know, got a couple of beer cases with your name on them
Thanks again, dude!
Peace.
Click to expand...
Click to collapse
Haha it's cool dude but if I ever visit I may holla at you for some of those beers though

I have the exact same problem as i_cs_u.
I tried to use an RUU to install 2.3, I have alpharev cm7r2 installed and I get stack on the same step as i_cs_u. I successfully flashed bravo_alphaspl.img with "fastboot boot bravo_alphaspl.img", but which partition do I flash bravo_downgrade.img to?

Flash bravo_downgrade.img and then the RUU.

Holabalola said:
I have the exact same problem as i_cs_u.
I tried to use an RUU to install 2.3, I have alpharev cm7r2 installed and I get stack on the same step as i_cs_u. I successfully flashed bravo_alphaspl.img with "fastboot boot bravo_alphaspl.img", but which partition do I flash bravo_downgrade.img to?
Click to expand...
Click to collapse
bootloader/hboot/spl

Nevermind, I got it to work

So write how to help others and if we helped you, use the thanks-button.

bortak said:
oh you're still S-OFF?
You're automatically in fastboot when you turn on since your phone is like that so just turn it on, plug it in first flash this and then flash this, Then run the RUU again.
Click to expand...
Click to collapse
Thanks for this. Returning desire tomorrow (switching networks) and forgot to resize and downgrade hboot before running ruu. Good job I ran into this thread for a reminder!

hey, i have a same problem as i_cs_u and dont know how to solve it, can someone give me explained proces?

Did you read the whole thread????

yes but he says that he cant do anything and then in next post he says its solved. i dont know how he solved this?

HTC_Desire_luka__ said:
yes but he says that he cant do anything and then in next post he says its solved. i dont know how he solved this?
Click to expand...
Click to collapse
He probably figured out that he has to use the fastboot flash boot *name of img* command or Android Flasher on that screen with the 4 ! At the corner instead of renaming to PB99IMG and attempting to flash it on the phone.
Sent from my HTC Original Desire with Android 4.0.1 ICS using Tapatalk

but i dont know how to do it from fastboot. i need an explaination of the process.