. .
I doubt they would have anything for the Galaxy Phones since the Jack and USB connection in that case is normally on the TOP of the phone (like the Captivate)
You'd have better luck modding and building your own. Considering the phone doesn't do upside down portrait at all oddly. I doubt it would be nearly anything like the iPod style docks since Apple did have the brilliance (the few times I do give them a compliment) of putting their major connector on the bottom of their mobile and portable products.
Although should such a product exist, I would be interested in seeing such thing maybe even purchasing one.
MZeora said:
I doubt they would have anything for the Galaxy Phones since the Jack and USB connection in that case is normally on the TOP of the phone (like the Captivate)
You'd have better luck modding and building your own. Considering the phone doesn't do upside down portrait at all oddly. I doubt it would be nearly anything like the iPod style docks since Apple did have the brilliance (the few times I do give them a compliment) of putting their major connector on the bottom of their mobile and portable products.
Although should such a product exist, I would be interested in seeing such thing maybe even purchasing one.
Click to expand...
Click to collapse
Mine does upside-down portrait just fine. (Though I think I'm quoting the wrong post, since I don't see the upside-down statement in your post.) (Nevermind, I see it now. Good, I am quoting the right person.) You have to go in display settings and enable 180-degree rotation or something like that. Some roms don't have that option, though so YMMV.
Samsung has done some good horizontal desk docks for it (once you register your captivate with samsung, it shows you a crapload of nice accessories) so it probably wouldn't be too hard to make one.
Easiest design would be to buy one of the horizontal desk docks, a small 3.5mm speaker set from Radio Shack, and drill a small hole in the dock to plug them in, then attach the speakers to the dock.
Could be done for under $50 if you use the Samsung official dock, way less if you use one from ebay or amazon.
Get the kind that is just an empty drawer and a headphone cord. Phone's right side up and you've got speakers.
Something like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
I am trying to find a relatively simple and cheap method to build what could be considered a night stand for my phone, and I am fairly confident that I am not the only one. Is anybody out there looking for ways to build such a device (even in passing)?
A member of the t-mobile forum recently ordered a stand from www.ezestand.com, which they are going to test out. The website mentions that the stand is not compatible with the droid incredible in horizontal mode, though. That seems like an issue that could plague the mytouch as well.
Another option I have been looking at a bit would be to use a business card stand. Something along the lines of the following stand could work...
http://www.amazon.com/Rolodex-Disti...MH/ref=sr_1_13?ie=UTF8&qid=1294169822&sr=8-13
Because the ends are open, the width of the phone would not be an issue. There is also a small base under the stand, and depending on what it is made out of, one could conceivably run a wire under the stand and cut a hole for the micro usb plug. It would be best to use a right angle micro USB, though.
Simple, cheap, and compatible with any phone.
vwrpm said:
Simple, cheap, and compatible with any phone.
Click to expand...
Click to collapse
LOL brilliant
While that is very neat, I don't like the idea of having something permanently on my bedside table that looks like garbage.
For what it's worth, I stopped by office max and they had that exact business card holder that I linked to in stock. It was cheaper there (about 6 bucks), and the bottom is made of a solid piece of some kind of particle board (as opposed to hollow plastic). That makes it a bit trickier, but I can imagine how a right angle micro usb plug could be worked in through the back piece of metal and a little shelf could be put in the bottom to hold the bottom of the phone up.
so i have been thinking of doing a car dock for the mytouch 4g, since I successfully modded the oem desk dock to use the three pins on the side..
well, I have a alpine blackbird navigation I bought awhile back and it had the car dock for it and I was thinking may be I can do something with this since I hardly use or I lost/broke the blackbird...
but I here are pics I took:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I was thinking of switching or joining the mytouch to the alpine dock:?
let me know what you all think?
Interesting idea. From the video I have seen of the official dock (primarily yours), it seems like it is quite a snug fit. I am not sure how you will be able to recreate that, but I bet that dock would work fantastically.
App Launching On Power
Im not sure if the official dock launches apps, but if you want app launching Check Out "powerwifi" from the android market, or you can go here http://sites.google.com/site/scadaguru/power-wifi
Help Support This App, it was made by my Dad
Help Us Out
I have been thinking of doing something like this myself as well... I even drew up some quick ideas and made a cardboard prototype...I tried to design it where the angle may be adjusted....idk..
hmmmm
i had a thought about this also. what if we found a case that fit the phone and cut it down to spec, mounted it, then wired it up. i was even thinking about using the case to mold some others so i could make multiple ones that i might like
http://placewiz.com/Stand.php
Just got it set up with my GT 10.1. The beauty of the stand is the fact that I can have my Samsung Book Cover Case installed on the tab, have the charging cable plugged into the bottom of the tab, and have the tablet on the stand with the volume controls and 3.5 jack on the top. Almost every stand I have found did not have enough room for the connector to be installed while placed on the stand, but this one fixed that for me, at a grand total of $10 on ebay!
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220772954466&ssPageName=STRK:MEWNX:IT
Mike
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Galaxy Tab with stand, charging.
wow that is so awesome!
seems nice... how sturdy is it? did you try any other stands or was this the first one you got?
personally I dont need the ability to charge it while on the stand, so sturdiness is the name of the game for me, so i've been thinking about the Arkon but maybe this is even better... just curious if you tried the Arkon out also?
Regarding how sturdy it is... for me, it's perfectly fine. The problem I found is I keep my desk clean with pledge, which makes the surface too slippery and the stand itself doesn't have any way to grip. I think I will just stop down at the local hobby store and find some sort of rubber strip I can put on the feet of the stand to have it stop sliding. Besides that, I only get a minor wobble when tapping the screen, but only at the top, and only if I press abnormally hard. For $10 you can't beat it.
nice 10char
Just bought one.
That looks really nice.
kegacide said:
personally I dont need the ability to charge it while on the stand, so sturdiness is the name of the game for me, so i've been thinking about the Arkon but maybe this is even better... just curious if you tried the Arkon out also?
Click to expand...
Click to collapse
I have the Arkon, it's very sturdy, very adjustable. It's made of some sort of hard plastic/polymer, with foam cushion layer on the bottom so it doesn't slide and where it touches the tablet. The only issue is the tablet sits too low for the charge connector in landscape mode.
lol, it is a rabbit
Used magnetic base stand from a dial indicator to hold GNex while mirroring output through MHL adpater to my second computer monitor at work. I used some flexible preforated pipe strap to clamp together the micro usb plug part of the MHL adapter and the 3.5mm audio plug tightly parallel so the phone can be set straight onto them. The audio out goes to some cheap PC speakers. Using an Apple magic trackpad to control via bluetooth ala Living Digitaly even though I loathe apple, no good substitute. But it does work seamlessly and intuitively, so I gotta give it up. The rest of the bracketry is adjustable to any angle and has a support arm to keep some force off the connectors. I chose to use these material because we had them lying around my office, other material could easily be substituted. No solution yet for the rat's nest of wires. It seems solid and should be a simple project for the adventurous. Check out my other project, a pogo pin car dock
The video!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Changed configuration a bit to lower center of gravity, ease docking, and unblock monitor.
Thats awesome!
interesting, does the trackpad work out of the box or did you do some scripting?
Plug and play! Its a shame its apple, and works very well, because I would much rather used something from an android or aftermarket manufacturer. It was also damn expensive, but worth it in the end once you are all lazy on the couch and the phone is ALL the way over by the TV.
That is amazing!
Sent from my Full AOSP on Toro-VZW using xda app-developers app
I like the look of this, it looks kinda steampunkish with the metal rods showing like that. Also like someone else has said previously, to bad you are using the apple track pad thingie. As natural as that may be, I dont want to give my money to apple. It's unfortunate that no third party businesses make any of those or something somewhat similar.
That someone was me. still use this one at work even though I made the ultimate glow dock. I'm an admitted apple-hater, but they sure whipped up an unparalleled interface. Too bad for them, its best use is on Android!
Inspiring setup! :good:
Could you tell me what ROM/Launcher/Dock you are using? Looks very appealing.
Streaker said:
Inspiring setup! :good:
Could you tell me what ROM/Launcher/Dock you are using? Looks very appealing.
Click to expand...
Click to collapse
Sorry for the delay.... FNV rom, Nova launcher without dock,digital hive LWP, blue PCB theme from scar45
Update! Now Nexus7 + Gnex dock!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I recently got myself a 2004 Nissan Maxima.
This is what the centre console looks like stock
Anyways, when I bought the Nexus 7 I placed in front of the screen and it was a perfect fit. I decided to open it all up and move the screen to a lower position. (I lost one of those map pockets but whatever). Sidenote: on the left side of the picture under the steering column I tucked away an Avantree bluetooth module. Helped me retrofit the car with bluetooth audio so no wires
After all that I was left with this:
So i decided to install my N4 qi wireless charger in there. It's pretty ghetto really, I bought some cardboard, some felt and a pvc pipe for support taped it all together and:
Gave it power by soldering a micro usb cable down the back. Placed it in the huge space while resting the end of the pvc pipe onto an inner lip:
Best part is, my N4 fits nicely as well and because of the rubber lip I created to help the N7 slide in, it isn't free to move around.
When I took these pictures the soldering wasn't done which is why they aren't charging in the photos.
Anyways, thought I'd share, hope you guys liked it! Also sorry if this was more of a mod than an accessory but still
Let me know what you guys think!
I think its awesome!
Question though, how are you running Navigation with the Nexus 7? Are you tethering your phone to it? Or is it LTE?
There are lots of offline gps apps (navigon, sygic,...). And you can update the maps over wifi since the n7 is removable from his build carboard. No traffic informations I guess, but that's fine with me.
Very nice though. I wanted to do a thing like that but there are too many modifications to do on my '96 Peugeot 106^^
Maybe with a new car in a few years.
On my 2.3 device I had a "car interface", it's helpful for quick interactions. You might wanna look it up
Sent from my Nexus 7 (2013) using xda-app
You can grab one here
http://www.amazon.com/dp/B00TDHEFNY?utm_source=amazon&utm_medium=cpc&utm_campaign=charger
I am reviewing the following device in return for the usage and review of the said item here in XDA. I am not employed or affiliated with them, they were kind enough to seek my opinion on this product.
While not an accessory specific to Nexus 6, I figured I'd add this here because the N6 does have Quick Charging and wanted to let people know my experience with the item.
And honestly, I was looking for one of these desktop chargers for home. I previously bought one when I go on trips to power my various devices, but was looking to upgrade due to me and my wife's phone now equipped with Quick Charge 2.0.
Upon receiving it, The packaging was really nice. Minimal and not too much. Just enough to protect the contents and not hard to unpack at all. Inside housed the desktop charger, the plug, instructions, and other literature as seen in the pics.
The look is a nice textured matte finish and you can grip it pretty well. It has a good weight to it so it won't fly off your desk if you push papers towards it. You can orient it any way you would like to use it, but my preference for this charger is flat with the print facing up. I found that this way, it won't flop over, even though it has some heft to it, you can accidentally knock it over.
There is a power LED when you plug it into the wall. Not bright, just a nice dim blue led to let you know it's on. IMO a nice touch. Next I plugged in both mine and my wife's phone. (Nexus 6 and HTC M8 respectively). And both charged up pretty quickly! I then tested out the remaining three ports (the non-quick charge ones) and all worked as it should. Also I have to note that all the USB ports were easy to plug in and remove with different usb cords.
So is there really any negatives here? Not that I can see. This is a great product for the price listed on Amazon (17 USD prior to shipping if not a prime member).
Maybe offer different colors? With different color LEDs? Just throwing some quick things off the top of my head. But otherwise it's a great product to use.
Would I recommend this? Yes! Because multiple devices that have Quick Charge, we needed this for the times we need to quickly charge up before heading out to of the house and not really worry about carrying external batteries.
Any questions feel free to ask! Pics below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Exactly what I didn't realize I needed! Ordered 2.
LG G2 VZW
deleted