I have just tried to root my phone..
I have followed the instruction that says..
Once you have the drivers installed on your computer, unzip the oneclickroot and oneclickrootuninstaller .
Then, on your phone open Settings, go to Applications, then Development and click on USB Debugging (note: your USB cable should not be connected yet).
Connect your USB cable to the computer and the phone.
Then go to the directory you installed the oneclickroot to and double-click the run.bat file there. Follow the prompts on the screen.
Your phone will be rebooted for you when the process is complete.
Now turn off the phone. When the phone has finished shutting down, hold the volume down button, the camera button, and the power button all at the same time until you boot into recovery.
If the screen says Clockworkmod Recovery at the top, then everything worked fine, and you can reboot the phone by clicking the first option
Click to expand...
Click to collapse
and I did reboot my phone..but the screen keep showing "samsungmobile" and not proceed..
what should I do?
If you followed those instructions, then it would have worked. You did something wrong. Take the battery out for 30 seconds, put it back in, and try to start the phone...don't try to get into recovery, just try to boot. Assuming you can get it back up and running, try the one-click again.
I had the same issue.. in order to fix it I needed to ODIN the phone back to D18 or the Froyo leak.
leatherneck6017 said:
If you followed those instructions, then it would have worked. You did something wrong. Take the battery out for 30 seconds, put it back in, and try to start the phone...don't try to get into recovery, just try to boot. Assuming you can get it back up and running, try the one-click again.
Click to expand...
Click to collapse
last night (here in my place) I took the battery, put it back, and start the phone by three finger grip. I tried to boogt...failed. I did it again to get into recovery..failed again..
still workin on it..
If it won't boot or go into recovery then try to get it into download mode take out the battery and then put it back in and hold 1 on the keyboard and hit power. If you can get into download mode you can then use Odin to flash a stock rom. and a brick s when your phone won't turn on at all so it's nit bricked. I'm positive you can get into download mode. That is prolly your only option.
musclehead84 said:
If it won't boot or go into recovery then try to get it into download mode take out the battery and then put it back in and hold 1 on the keyboard and hit power. If you can get into download mode you can then use Odin to flash a stock rom. and a brick s when your phone won't turn on at all so it's nit bricked. I'm positive you can get into download mode. That is prolly your only option.
Click to expand...
Click to collapse
yes thx.. I can odin it to stock ROM..
thx for the help everyone..
Epic 4g one click root
leatherneck6017 said:
If you followed those instructions, then it would have worked. You did something wrong. Take the battery out for 30 seconds, put it back in, and try to start the phone...don't try to get into recovery, just try to boot. Assuming you can get it back up and running, try the one-click again.
Click to expand...
Click to collapse
I have tried to do the one click root several times. I watched Randy's video and followed it to the letter at the same time. It was like we were sinked. Finished at the same time the video did. When I reboot it sticks on the Samsung and the only way out is to take the battery out. I have no problem restoring the phone with odin. I have 2.2.1 froyo leak and it loads fine. Could this problem be with the new phones? I just purchase this phone about 1 week ago. There are others who are having the same problems. I have tried several different ideas and to no success yet. I can get into the one click by pressing the right keys, but when I reboot still the same problem.
Thanks in advance if you can help
HogRider
I have read it somewhere that Samsung USB cable that came w/ the phone is a PoS. Granted I never had a cable that gone bad right out of the box , but I had cable that cause intermittent problem before. If you have another USB cable other than the one that came w/ the phone, maybe you should give that a try.
When I do the root it says that all has passed and loaded all files with no mistakes or faults and all the other connections work fine. I can format the sd card then put it back because I have saved all the data to my computer. I will give it a try
Thanks for the reply
Well I found an unorthodox way to fix the problem of the one click root. After downloading the one click root I installed from the zip folder VIPERrom_[Apocalypse]_EXT4-RFS_Dual_DK28_4.0.2c before I did the reboot. When I did that the phone worked fine and now I have viporrom
Hogrider1954 said:
Well I found an unorthodox way to fix the problem of the one click root. After downloading the one click root I installed from the zip folder VIPERrom_[Apocalypse]_EXT4-RFS_Dual_DK28_4.0.2c before I did the reboot. When I did that the phone worked fine and now I have viporrom
Click to expand...
Click to collapse
I guess that makes sense if your trying to install the One Click Root & Recovery on a stock DK28 rom, as when it installs CWM, it actually flashes a kernel when it does it. I would assume the kernel is based on DI18 2.1, which would cause issues if your on DK28 2.2. You could get around this by extracting the zimage file from the DK28 kernel zip and replacing the one in the one click folder.
Now if you were having those issues when starting from a stock DI18 rom, I would think flashing that 2.2 kernel wouldn't help matters either.
Related
I have an epic touch. I rooted my phone and installed ClockworkMod Recovery, and StarBurst ROM. I could not tell if it worked because the screen and icons look exactly the same as factory. I then tried to add my company's email which asked me to restart the phone in order to encrypt some information. After it turned off, I have not been able to turn it back on. I see the start up screen (i.e., the word "Android" flashing) with no sound (which I believe is part of StarBurst). Then the screen goes blank and it stays off. Did I screw up my phone? What can I do to fix it? I tried a factory reset but that did not work. I would appreciate any help. I did try to search but could not find anything directly applicable. Thanks.
Well, I am able to boot it up. However, when I try to reinstall clockwork, I get an error stating that odin cannot open the serial(COM) port. So I cannot reinstall clockwork, or a stock kernel. I am unsure what I should do next. Any idea why odin does not recognize my phone?
jchi18 said:
Well, I am able to boot it up. However, when I try to reinstall clockwork, I get an error stating that odin cannot open the serial(COM) port. So I cannot reinstall clockwork, or a stock kernel. I am unsure what I should do next. Any idea why odin does not recognize my phone?
Click to expand...
Click to collapse
You do have the drivers loaded right? Try a different cable.
Sent from my SPH-D710 using xda premium
I got CWM recovery loaded but now it won't start up now. It keeps on showing the start up screen over and over again. I feel like I am making things worse. Please please help.
crawrj said:
You do have the drivers loaded right? Try a different cable.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
It wasn't working and then it worked out of nowhere. Now I am trying to install a stock kernel but it doesn't work again.
I have the drivers downloaded when I installed kies. I tried another cable and it still doesn't work.
Ugh, sorry to hear it.
You might want to check the following:
1) Ensure Kies isn't running in the background.... it doesn't play well with Odin. Use your computer Task Manager to close any Kies processes that are running.
2) If 1 doesn't work, try restarting your computer. (It can't hurt)
One other thing I thought of: The phone is in download mode when connecting to the computer, correct? You get into download mode by shutting down phone, then pressing Volume Down & Power at the same time. At the prompt, press Up to continue.
(You've probably tried all of the above, but just trying to cover all the bases)
geekaren said:
Ugh, sorry to hear it.
You might want to check the following:
1) Ensure Kies isn't running in the background.... it doesn't play well with Odin. Use your computer Task Manager to close any Kies processes that are running.
2) If 1 doesn't work, try restarting your computer. (It can't hurt)
One other thing I thought of: The phone is in download mode when connecting to the computer, correct? You get into download mode by shutting down phone, then pressing Volume Down & Power at the same time. At the prompt, press Up to continue.
(You've probably tried all of the above, but just trying to cover all the bases)
Click to expand...
Click to collapse
Turning off Kies did the trick. I was able to get odin to connect to my phone. I downloaded the stock kernel onto my phone. But I still have the same issue. It constantly cycles through the start up screen and doesn't progress past that point. Ugh...
I remember seeing something about how to handle bootloops after using odin on the international SGS2 forum. No guarantee it will work, but let me go find that post... be right back.
Updated: The post-Odin bootloop fix posts on int'l SGS2 forums all reference reflashing with stock firmware. We don't have that available yet for E4GT :-(
The only thing I can think of would be to go into stock recovery and do a factory reset
1) hold down power & volume Up
2) use volume up/down to select "wipe data/factory reset"
3) follow prompts
I haven't tried the above to recover from an E4GT bootloop -- for all I know it could make matters worse.
Sorry I can't provide more help :-(
geekaren said:
I remember seeing something about how to handle bootloops after using odin on the international SGS2 forum. No guarantee it will work, but let me go find that post... be right back.
Updated: The post-Odin bootloop fix posts on int'l SGS2 forums all reference reflashing with stock firmware. We don't have that available yet for E4GT :-(
The only thing I can think of would be to go into stock recovery and do a factory reset
1) hold down power & volume Up
2) use volume up/down to select "wipe data/factory reset"
3) follow prompts
I haven't tried the above to recover from an E4GT bootloop -- for all I know it could make matters worse.
Sorry I can't provide more help :-(
Click to expand...
Click to collapse
That actually helped. I am able to boot up. Now I don't know whether I should leave it as it is or try to go through the steps all over again.
btw, thank you so much for your help. Very much appreciated.
You're welcome, so glad that worked!!
I saw a couple people had the same issue that im now having but none of there solutions solved my problem
i wiped my GS3 for ATT tried to go back to a stock with root rom and when it rebooted it now just hangs at the samsung logo at boot tried re-flashing via odin with no luck also tried flashing a CWM.tar since i cant get into stock or CWM recovery to flash from there is there something im missing i know its late and maybe my brain isnt working like it should
Solved the problem myself.....and rather then just say i figured it out ill share how i did this since i watched countless videos and read endless amounts of threads and since none of them helped mem
First also try t put your phone into stock recovery mode and wipe your phone then flash this should take care of things if it doesnt try what i tried below
and i hope this can help someone else out there who has the same problem that i had all you have to do is the following i did this with obviously an AT&T model should work with others but as always try at your own risk.....
First make sure your battery has a charge even if its stuck on the boot screen its still charging....
then download KIES from samsung update it and make sure you have the latest version.
Next plug in your phone if your stuck at the samsung screen your computer will recognize your phone still at least it did with mine.
Once your done with the above open up KIES goto the top and then TOOLS and Firmware upgrade click on that enter your phone model (ATT SGH-I747) i dont get this part but next it will ask you for your SN and for some reason it doesnt recognize the SN use your IMEI
Now it should ask you a couple questions tell you its wiping your device and you will lose everything etc.....but then it will download the latest FW and begin to install everything and in about 20-25 mins everything will be back to stock
Nvm.. misread.
I'm stuck too...and Kies can't find the phone. Anyone have any other ideas? I can't even get into recovery...only download mode.
dbdynsty25 said:
I'm stuck too...and Kies can't find the phone. Anyone have any other ideas? I can't even get into recovery...only download mode.
Click to expand...
Click to collapse
your computer is not seeing your phone when you plug it in or its just KIES that doesnt see it??
also im guessing you have all the correct drivers installed??
yearziro said:
your computer is not seeing your phone when you plug it in or its just KIES that doesnt see it??
also im guessing you have all the correct drivers installed??
Click to expand...
Click to collapse
Yes, all drivers are installed because that's how I ODIN flashed it in the first place! Just stuck on the damn Samsung screen and I can't get Kies to connect to the phone. Not in Download Mode or when it's just stuck on that screen.
you can just hold VOL UP, HOME , POWER same time enter stock samsung recovery mode and scroll down select wipe data and cache and reboot u should good to go....
whit3gh0szt said:
you can just hold VOL UP, HOME , POWER same time enter stock samsung recovery mode and scroll down select wipe data and cache and reboot u should good to go....
Click to expand...
Click to collapse
Worked, thanks! I appreciate it.
it doesnt work on mine
dbdynsty25 said:
Worked, thanks! I appreciate it.
Click to expand...
Click to collapse
my cellphone reboots by itself on the samsun screen and i cant get on the recovery mode! any ideas!"
me neither
mkstf said:
my cellphone reboots by itself on the samsun screen and i cant get on the recovery mode! any ideas!"
Click to expand...
Click to collapse
Yeah I can't get into recovery either, and its getting really annoying.
indieslap said:
Yeah I can't get into recovery either, and its getting really annoying.
Click to expand...
Click to collapse
With the phone off, hold down VOL UP + HOME + POWER until the phone vibrates. Then let go of the power button. When you see the blue text in the top left corner of the samsung boot screen, let go of the other 2 buttons
xBeerdroiDx said:
With the phone off, hold down VOL UP + HOME + POWER until the phone vibrates. Then let go of the power button. When you see the blue text in the top left corner of the samsung boot screen, let go of the other 2 buttons
Click to expand...
Click to collapse
Okay, this brought the menu up for me, but I removed the data,cache, and reset the phone and it is still not working. Also, my phone just goes black after the Galaxy Samsung S3 logo, but the blue light in the top left is still on. Can anyone help me out?
P.S. Sorry for reviving this thread if it is too old.
Edit: I should also mention that I can still hear the sound of the phone booting up (the sound that typically occurs when the phone is on the white loading screen). However, the screen is black at this point.
cabato said:
Okay, this brought the menu up for me, but I removed the data,cache, and reset the phone and it is still not working. Also, my phone just goes black after the Galaxy Samsung S3 logo, but the blue light in the top left is still on. Can anyone help me out?
P.S. Sorry for reviving this thread if it is too old.
Edit: I should also mention that I can still hear the sound of the phone booting up (the sound that typically occurs when the phone is on the white loading screen). However, the screen is black at this point.
Click to expand...
Click to collapse
You're going to have to tell us what you did (changed, flashed, etc) before all this so that we can help you
xBeerdroiDx said:
You're going to have to tell us what you did (changed, flashed, etc) before all this so that we can help you
Click to expand...
Click to collapse
Ah, sorry about not providing enough information. Please keep in mind that I am very inexperienced and I may get some things incorrect just due to that. To my understanding, I went to try and root my phone, but beforehand I used the guides below to get my phone ready for the root (yes I do realize at this point that using these outdated guides was a clear mistake and I should have come to XDA instead). I flashed my phone to the stock kernel using the file that site provided, and then encountered the problem above. In my panic I have tried to restore the phone through several methods, but every time I try to load anything onto it with Odin, it doesn't complete until my phone restarts (and my phone won't boot up completely) so I can't get the pass message. Interestingly enough I did manage to get clockwork mod installed as that is what shows up when I try a secure boot using the methods that you described.
Ah, I am unfortunately not allowed to post links. The guides were off of Android Authority.
If there is any other information needed to help me please let me know and I will do my best to obtain it.
cabato said:
Ah, sorry about not providing enough information. Please keep in mind that I am very inexperienced and I may get some things incorrect just due to that. To my understanding, I went to try and root my phone, but beforehand I used the guides below to get my phone ready for the root (yes I do realize at this point that using these outdated guides was a clear mistake and I should have come to XDA instead). I flashed my phone to the stock kernel using the file that site provided, and then encountered the problem above. In my panic I have tried to restore the phone through several methods, but every time I try to load anything onto it with Odin, it doesn't complete until my phone restarts (and my phone won't boot up completely) so I can't get the pass message. Interestingly enough I did manage to get clockwork mod installed as that is what shows up when I try a secure boot using the methods that you described.
Ah, I am unfortunately not allowed to post links. The guides were off of Android Authority.
If there is any other information needed to help me please let me know and I will do my best to obtain it.
Click to expand...
Click to collapse
Sounds like you need to clear your cache partition and clear your dalvik cache. There are several guides on this site to help you. Choose the one that is most appropriate to what you are trying to do and follow it EXACTLY. There is one to start. Follow it from the beginning.
http://forum.xda-developers.com/showthread.php?t=2042775
When nothing else works start over from search. You cab use download mode? First make sure you got right drivers as that can mess up Odin. Use one in my Sig if you want. Then flag stock recovery with root someone nice will part a link to it I'm on my phone can't do it. Well fix your phone
Sent from my SGH-I747 using xda premium
allow rldcess
Okay now I am running into another problem. I have tried downloading the drivers from many different places and they always seem to be correctly downloaded. That being said, I can't install the drivers after I plug my phone into the computer (after downloading and installing Samsung USB drivers). Therefore, I cannot access my phone storage to put the root zip file on it. I was still able to download the custom recovery.
Now I have gone to a different computer, and the drivers seem to install correctly, but the phone still does not appear under my computer.
Edit: I do already have a root zip file on my phone from my earlier attempt, but I install it and my phone still doesn't load up. Also, Odin still recognizes the phone.
Edit 2: Windows says that the drivers cannot recognize the device. Edit 3: "Hardware ID Missing"
Bump
Sorry, I really need help for this. I can't install the MTP drivers even through using some of the tips on this site. That seems to be the problem with me accessing the phones storage from my computer. Does anyone have an ideas for what else I could do? Should I just take it to the store and hope they can fix it?
cabato said:
Okay now I am running into another problem. I have tried downloading the drivers from many different places and they always seem to be correctly downloaded. That being said, I can't install the drivers after I plug my phone into the computer (after downloading and installing Samsung USB drivers). Therefore, I cannot access my phone storage to put the root zip file on it. I was still able to download the custom recovery.
Now I have gone to a different computer, and the drivers seem to install correctly, but the phone still does not appear under my computer.
Edit: I do already have a root zip file on my phone from my earlier attempt, but I install it and my phone still doesn't load up. Also, Odin still recognizes the phone.
Edit 2: Windows says that the drivers cannot recognize the device. Edit 3: "Hardware ID Missing"
Click to expand...
Click to collapse
go to your device manager on your computer, locate samsung drivers for your device, uninstall them
restart your computer
then plug in the phone and lets it reinstall by itself
Use my drivers in my signature
They are last good damaging drivers. Don't update them but install them and plug phone in with no internet. after install plug internet in. There good stable drivers
Sent from my SAMSUNG-SGH-I747 using xda premium
I was on the FK23 rom for a while, and everything was working perfectly. However, last night, I ran a white noise machine app from my phone while it was on the charger all night.
When I went to unlock the phone this morning, it wouldn't unlock, so I pulled the battery, and it started to bootloop. It would do the Galaxy SII screen, then the Sprint bootup, then it would play the Sprint boot down animation. Over and over.
So I tried flashing FL16 with ODIN, and when I do that, it gets stuck on hidden.img and doesn't do anything. Then I tried flashing EL29 with ODIN, and it gets stuck on recovery.bin and doesn't do anything. I have used multiple PCs and multiple cables. WHAT AM I DOING WRONG?! I just want my phone to work T_T
anchor_th said:
I was on the FK23 rom for a while, and everything was working perfectly. However, last night, I ran a white noise machine app from my phone while it was on the charger all night.
When I went to unlock the phone this morning, it wouldn't unlock, so I pulled the battery, and it started to bootloop. It would do the Galaxy SII screen, then the Sprint bootup, then it would play the Sprint boot down animation. Over and over.
So I tried flashing FL16 with ODIN, and when I do that, it gets stuck on hidden.img and doesn't do anything. Then I tried flashing EL29 with ODIN, and it gets stuck on recovery.bin and doesn't do anything. I have used multiple PCs and multiple cables. WHAT AM I DOING WRONG?! I just want my phone to work T_T
Click to expand...
Click to collapse
Do a factory restore and wipe then odin one click stock EL29 and start from scratch.
I can't do a factory restore. When I hold Vol up + power, it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
:edited: Didn't see your response to graydiggy
Redownload a complete one click, verify md5 and try putting the phone in download mode and attempting again. It's possible that your download was bad.
so is there nothing I can do?
By technicality, that is not a brick. You should be able to flash from that message. That was the case with the Samsung Captivate.
I downloaded EL29 and verified it again. It is doing the same thing. stuck on recovery.bin
I also tried flashing from that message just now. Same thing. ODIN gets stuck on recovery.bin
thanks for the help but I think it's ****ed. something might have messed up in the filesystem and that's why ODIN gets stuck maybe.
anchor_th said:
I downloaded EL29 and verified it again. It is doing the same thing. stuck on recovery.bin
I also tried flashing from that message just now. Same thing. ODIN gets stuck on recovery.bin
Click to expand...
Click to collapse
Ok, so I found a solution by sfhub that worked for someone from a while ago. Try using pc odin to flash each piece seperately. Modem, kernel, then rom..
Here's my ref:
See post #9 http://forum.xda-developers.com/showthread.php?t=1492771
I'll see if this works. Hopefully it does, I'm ready to toss the thing out of a window, haha
edit: noob question, how do I flash the .md5 files? I downloaded odin multi downloader but the phone doesn't show up in it.
edit 2: okay nevermind I figured it out, it seems to be flashing
edit 3: so modem flashed just fine and the phone rebooted but when I try kernel it loads the green bar all the way on odin then it freezes...
edit 4: so I think my phone's flash memory might be screwed somehow. I've been reading other threads and someone had a similar problem as me and couldn't fix it.
anchor_th said:
I'll see if this works. Hopefully it does, I'm ready to toss the thing out of a window, haha
edit: noob question, how do I flash the .md5 files? I downloaded odin multi downloader but the phone doesn't show up in it.
edit 2: okay nevermind I figured it out, it seems to be flashing
edit 3: so modem flashed just fine and the phone rebooted but when I try kernel it loads the green bar all the way on odin then it freezes...
edit 4: so I think my phone's flash memory might be screwed somehow. I've been reading other threads and someone had a similar problem as me and couldn't fix it.
Click to expand...
Click to collapse
Have you flashed all three pieces before trying to let the phone boot completely? Once you flash the first piece and it restarts, Just hold power+vol down and get back into download. Do that until you have all three segments flashed. Then try letting it boot.
I flashed the modem, it worked, then I rebooted back into download. Then I tried flashing kernel and the bar on ODIN filled up but then it froze and did nothing. I let it sit for about 10 minutes and it still did nothing. so I tried skipping that and flashing the rom and the bar on ODIN moved barely then froze. Like I said, I think my phone's flash memory got messed up somehow. :\
anchor_th said:
I flashed the modem, it worked, then I rebooted back into download. Then I tried flashing kernel and the bar on ODIN filled up but then it froze and did nothing. I let it sit for about 10 minutes and it still did nothing. so I tried skipping that and flashing the rom and the bar on ODIN moved barely then froze. Like I said, I think my phone's flash memory got messed up somehow. :\
Click to expand...
Click to collapse
Then there may be one more thread that might help if that's the case.
Kernel is only the zimage file. Hang on, let me find it.
:edit: Maybe this will help you. If not, maybe graydiggy or someone else has some ideas.
With this, you'll have to see if you can't flash a custom recovery. From the sound of it, it may not be helpful at all.
http://forum.xda-developers.com/showthread.php?t=1865102
Sent from my SPH-D710 using Xparent ICS Tapatalk 2
Yeah, I don't think there's a way to do that since I can't access ADB...
anchor_th said:
Yeah, I don't think there's a way to do that since I can't access ADB...
Click to expand...
Click to collapse
http://mobiletechvideos.mybigcommerce.com/samsung-epic-4g-touch-jtag-brick-repair/
I'll try that as a last resort. I'm going to a Sprint store tomorrow and I'll see what they tell me. I just might use all this as an excuse to finally get a Note II.
anchor_th said:
I'll try that as a last resort. I'm going to a Sprint store tomorrow and I'll see what they tell me. I just might use all this as an excuse to finally get a Note II.
Click to expand...
Click to collapse
They will probably know you borked it by trying to flash. If they can get to a recovery to see if you have flashed anything, you are screwed.
Do you by chance have a USB Download Mode JIG?
No, I don't. My download count in download mode is at 1, too.... so they probably won't fix it... but I might get lucky. Who knows.
edit: the messed up thing is I don't really know what messed it up. it worked fine for about a month on FK23, then boom, this morning it won't unlock and bootloops when I pull battery. before I tried flashing it, it wouldn't even go into recovery. when I held vol up + power, it just went to the Samsung screen and rebooted over and over
anchor_th said:
No, I don't. My download count in download mode is at 1, too.... so they probably won't fix it... but I might get lucky. Who knows.
edit: the messed up thing is I don't really know what messed it up. it worked fine for about a month on FK23, then boom, this morning it won't unlock and bootloops when I pull battery. before I tried flashing it, it wouldn't even go into recovery. when I held vol up + power, it just went to the Samsung screen and rebooted over and over
Click to expand...
Click to collapse
I have a theory... Give it a couple hours of plug in time without turning it on or trying to flash. Just give it like 3 hours and see if you can flash from there. You may have a battery that is low and it could be resulting in your problem of not being able to flash.
the battery was also on the charger all night... but I'll plug it in. is it charging even though it is on the connect to kies screen?
anchor_th said:
the battery was also on the charger all night... but I'll plug it in. is it charging even though it is on the connect to kies screen?
Click to expand...
Click to collapse
Just keep it completely powered off and use the normal wall charger.
I was on the rom TBSGS4 1.2 and was about to do a clean flash over to TBGS4 1.4. The directions said to use EL26 Direct-Boot and I've only ever used EL29 but decided everyone recommends EL26. So I mobile-odin EL26 and I notice something odd, the phone never leaves the Samsung Galaxy S2 logo, no matter how long I waited. I pulled the battery and tried a manual recovery on the phone and I get into CWM. I go ahead and wipe everything and installed the 1.4 rom as usual and reboot the phone when it finished. It got stuck at the same point again. So I rebooted into recovery again which is now Agat63_TRec3.5 I run a restore of my 1.2 file and it boots. I try then the el29 kernel to do the same process but end up with the frozen Samsung Galaxy S2 logo. Now I cannot access any recovery and all the downloads for RWilco's website are failing on me. I found an old EK02 stock rom and tried to odin it and it hangs at SetupConnection.. the phone won't even bring up the charging screen when powered off. It just sits with an empty battery with a rotation wheel that isn't moving.
So, is this a paperweight now?
Blaze611 said:
I was on the rom TBSGS4 1.2 and was about to do a clean flash over to TBGS4 1.4. The directions said to use EL26 Direct-Boot and I've only ever used EL29 but decided everyone recommends EL26. So I mobile-odin EL26 and I notice something odd, the phone never leaves the Samsung Galaxy S2 logo, no matter how long I waited. I pulled the battery and tried a manual recovery on the phone and I get into CWM. I go ahead and wipe everything and installed the 1.4 rom as usual and reboot the phone when it finished. It got stuck at the same point again. So I rebooted into recovery again which is now Agat63_TRec3.5 I run a restore of my 1.2 file and it boots. I try then the el29 kernel to do the same process but end up with the frozen Samsung Galaxy S2 logo. Now I cannot access any recovery and all the downloads for RWilco's website are failing on me. I found an old EK02 stock rom and tried to odin it and it hangs at SetupConnection.. the phone won't even bring up the charging screen when powered off. It just sits with an empty battery with a rotation wheel that isn't moving.
So, is this a paperweight now?
Click to expand...
Click to collapse
Wow you're doing a whole lot of confusing thing.
IF you can get into Download Mode -
Power off completely
Then hold the Power Button + Volume Down button
Hopefully you'll then be prompted to press Volume Up to confirm going into download mode.
IF you can get there you can then use a One-Click Full restore and get your phone back.
Go here for the GB27
Make sure your phone is charged to at least 60% FIRST. (maybe just power it off and plug it in for a while)
Also run the One-click 'As Administrator' AND run that BEFORE you plug your phone - that is in download mode, to the computer.
I'd suggest you use the SPH-D710_GB27_1014481_Rooted_Restore.exe file.
Good luck.
leaderbuilder said:
Wow you're doing a whole lot of confusing thing.
IF you can get into Download Mode -
Power off completely
Then hold the Power Button + Volume Down button
Hopefully you'll then be prompted to press Volume Up to confirm going into download mode.
IF you can get there you can then use a One-Click Full restore and get your phone back.
Go -snip-
Make sure your phone is charged to at least 60% FIRST. (maybe just power it off and plug it in for a while)
Also run the One-click 'As Administrator' AND run that BEFORE you plug your phone - that is in download mode, to the computer.
I'd suggest you use the SPH-D710_GB27_1014481_Rooted_Restore.exe file.
Good luck.
Click to expand...
Click to collapse
I'm trying to download that GB27 but it keeps saying it's going to take 8 days to finish downloading and is only getting 2KB/s. I can't find any mirror or anything for it. I'm stuck because of this, my first though was to re-odin my phone but Rwilco12's site is extremely slow.
Blaze611 said:
I'm trying to download that GB27 but it keeps saying it's going to take 8 days to finish downloading and is only getting 2KB/s. I can't find any mirror or anything for it. I'm stuck because of this, my first though was to re-odin my phone but Rwilco12's site is extremely slow.
Click to expand...
Click to collapse
The link I just used is here.
Took 15.5 minutes.
Verified MD5Sum too.
Maybe check your DNS settings (maybe use Googles as your primary 8.8.8.8) - I know that Rwilco's server(s) where hit with a DDoS attack recently.
leaderbuilder said:
The link I just used is here.
Took 15.5 minutes.
Verified MD5Sum too.
Maybe check your DNS settings (maybe use Googles as your primary 8.8.8.8) - I know that Rwilco's server(s) where hit with a DDoS attack recently.
Click to expand...
Click to collapse
Still slow, but it's almost done. Got it to finally get at least 45KB/s. Will update when I attempt odin it on.
Blaze611 said:
Still slow, but it's almost done. Got it to finally get at least 45KB/s. Will update when I attempt odin it on.
Click to expand...
Click to collapse
Keep us updated, once downloaded try to install it and go into download mode.
To know if you really haven't bricked yet is try going into download mode by Volume down and power at the same time.
The GB 27 had a MD5 error so I went looking through my recycle bin on my PC and found a Stock FI27 one click, I used odin and it fixed all the errors I had and it's booting perfectly now. I don't know why the el26 kernel with the safe recovery broke everything for me.
I have spent the last 3 days searching XDA & trying every possible fix, no luck!
Here's my dilemma.....
I have custom recovery, TWRP 2.6.3.3, don't know what I did after trying to flash something........ I wiped everything except SDcard by accident. Like a darn fool, forgot after backing up everything via computer, to put a spares on my SDcard. Sooooo, I tried restoring by using LG FlashTool..... Here's where my problems began:
1. I can't load into download mode, it sticks at the logo to enter download mode but doesn't connect.
2. I tried ADB Sideload, sticks at "STARTING ADB SIDELOAD FEATURE.........."
3. No matter what mode (including Fastboot) I try, just won't connect to my computer the way I need it to. (*ALL DRIVERS HAVE BEEN REINSTALLED NUMEROUS TIMES, STILL NO LUCK.*) When I look in DEVICE MANAGER, it shows in "OTHER DEVICES" as "LG-LS980" (*Which is a good thing right? *)
At this point i'm at my wits end...... I tried to HARD FACTORY RESET, but didn't go thru. I'm afraid that if I tried it again, I could cause even more damage.
I've been without my phone for days & I'm about to go crazy if I have to pay LG or Sprint again for another phone!!!! I'd rather use my $600 on something else.
PLEASE TELL ME SOMEONE HAS FOUND A WAY TO GET AROUND THIS!
I've searched just about every forum & tried different methods.
Forgot to add that every time I power off from recovery, I get a the message about my device not being rooted, would I like to install..... When I swipe to install, nothing happens. Just powers off.
MsOhSoPhresh said:
I have spent the last 3 days searching XDA & trying every possible fix, no luck!
Here's my dilemma.....
I have custom recovery, TWRP 2.6.3.3, don't know what I did after trying to flash something........ I wiped everything except SDcard by accident. Like a darn fool, forgot after backing up everything via computer, to put a spares on my SDcard. Sooooo, I tried restoring by using LG FlashTool..... Here's where my problems began:
1. I can't load into download mode, it sticks at the logo to enter download mode but doesn't connect.
2. I tried ADB Sideload, sticks at "STARTING ADB SIDELOAD FEATURE.........."
3. No matter what mode (including Fastboot) I try, just won't connect to my computer the way I need it to. (*ALL DRIVERS HAVE BEEN REINSTALLED NUMEROUS TIMES, STILL NO LUCK.*) When I look in DEVICE MANAGER, it shows in "OTHER DEVICES" as "LG-LS980" (*Which is a good thing right? *)
At this point i'm at my wits end...... I tried to HARD FACTORY RESET, but didn't go thru. I'm afraid that if I tried it again, I could cause even more damage.
I've been without my phone for days & I'm about to go crazy if I have to pay LG or Sprint again for another phone!!!! I'd rather use my $600 on something else.
PLEASE TELL ME SOMEONE HAS FOUND A WAY TO GET AROUND THIS!
I've searched just about every forum & tried different methods.
Click to expand...
Click to collapse
So try this...
Push the power button to turn the device on. Let it sit.
After you know that the g2 is on and trying to do its think, Press and hold power buttton, do not let go. It will force turn off the phone, but it will start to turn back on, if you keep holding the power button till it shuts off for the second time, you'll be set and the device will be fully off.
Have Lg Flash Tool open, make sure you have manual mode on and you point to the right dll and right tot file, could be zv7 zv8 or zva.
Click the arrow to have the flash tool biin check the files. when that is ready, do this next part fast. Plug in your phone, and immeditaly press and hold Volume up and Power. Download mode should appear.
and you should be good from there! If you try to enter download mode by using volume and up without the cable plug in, you'll hit the factory reset menu which is tied to the recovery, it'll do nothing, only take you to recovery. I hope this is of some help!
Edit:try new boot loader or system flasher via twrp
proplem i faced is one button which used to enter recovery is damged
Flash stock Ignoring the unmonted ianot able to be mounted then change system partitions u will be able to mount
Enjoy
bmxerkid954 said:
So try this...
Push the power button to turn the device on. Let it sit.
After you know that the g2 is on and trying to do its think, Press and hold power buttton, do not let go. It will force turn off the phone, but it will start to turn back on, if you keep holding the power button till it shuts off for the second time, you'll be set and the device will be fully off.
Have Lg Flash Tool open, make sure you have manual mode on and you point to the right dll and right tot file, could be zv7 zv8 or zva.
Click the arrow to have the flash tool biin check the files. when that is ready, do this next part fast. Plug in your phone, and immeditaly press and hold Volume up and Power. Download mode should appear.
and you should be good from there! If you try to enter download mode by using volume and up without the cable plug in, you'll hit the factory reset menu which is tied to the recovery, it'll do nothing, only take you to recovery. I hope this is of some help!
Click to expand...
Click to collapse
This isn't working. I've tried this numerous times..... No luck.
myaservip said:
Edit:try new boot loader or system flasher via twrp
proplem i faced is one button which used to enter recovery is damged
Flash stock Ignoring the unmonted ianot able to be mounted then change system partitions u will be able to mount
Enjoy
Click to expand...
Click to collapse
I'm now completely lost.....
Ok... So i made a little progress....
I am now able to boot into fastboot mode.... No recovery now tho. If someone can help me with manually pushing everything I need to restore my phone, it would make my day!
I'm having withdrawal symptoms now. LOL! I MISS MY PHONE!
Problem solved!
Flashed all the partitions 1by1 via fastboot, was able to then reboot into download mode. Now using LG FlashTool to return to stock! I am now a very happy camper after a week w/o my phone!
MsOhSoPhresh said:
This isn't working. I've tried this numerous times..... No luck.
Click to expand...
Click to collapse
MsOhSoPhresh said:
I am now able to boot into fastboot mode.... No recovery now tho. If someone can help me with manually pushing everything I need to restore my phone, it would make my day!
I'm having withdrawal symptoms now. LOL! I MISS MY PHONE!
Click to expand...
Click to collapse
MsOhSoPhresh said:
Flashed all the partitions 1by1 via fastboot, was able to then reboot into download mode. Now using LG FlashTool to return to stock! I am now a very happy camper after a week w/o my phone!
Click to expand...
Click to collapse
Glad to see you've fixed your problem! I myself haven't been around, had some down time to. My sim reader magically stopped working and then randomly started working days later. Anyway, congrats!!!
MsOhSoPhresh said:
Flashed all the partitions 1by1 via fastboot, was able to then reboot into download mode. Now using LG FlashTool to return to stock! I am now a very happy camper after a week w/o my phone!
Click to expand...
Click to collapse
Glad you figured it out. I was about to basically explain the steps to do exactly what you did.
Welcome back to the land of the living!
agentfusion said:
Glad you figured it out. I was about to basically explain the steps to do exactly what you did.
Welcome back to the land of the living!
Click to expand...
Click to collapse
After she got it the first time, which we both congratulated her for, something went completely wrong. She dug herself even deeper, but broke download mode. That was extremely fun to fix.