Hi So my friend rooted his HTC Wildfire S the other day and then flashed an experimental version of CM7 on it. Now its bricked and forever stays on a black screen. Occasionally, it will vibrate 3 or 4 times but thats about the only action it does. I tried putting PG76IMG.zip on my sd card and holding power + vol down but that didnt work. The phone also isnt recognized by Windows 7 Ultimate or Mac OSX Lion, but it does charge. Can i get some help on this? Thanks guys
can you get to custom recovery or hboot ?
nope, screen wont even turn on.
Have you tried flashing a RUU?
The phone isnt recognized by windows. it says there is a USB error. Unless maybe i used the wrong RUU?
SynGatesFan20 said:
The phone isnt recognized by windows. it says there is a USB error. Unless maybe i used the wrong RUU?
Click to expand...
Click to collapse
Where are you?
What network are you on?
What phone do you have?
United states, wisconsin
virgin mobile
HTC Wildfire S
You are in Qualcomm Diagnostic Mode. Use Search and enter Qualcomm Diagnostic Mode. Fund a WFS guide and use it accordingly.
Sent from a Time Lord, using his TARDIS.
i did and the only guide i could find didnt help much. My phone doesnt seem to recognize that the .zip file is on the sd card... i want to use the RUU but my computer wont recognize the phone either, not even as a device listed as "qualcomm device". The only thing my phone does is vibrate either 3,4, or 7 times.
SynGatesFan20 said:
i did and the only guide i could find didnt help much. My phone doesnt seem to recognize that the .zip file is on the sd card... i want to use the RUU but my computer wont recognize the phone either, not even as a device listed as "qualcomm device". The only thing my phone does is vibrate either 3,4, or 7 times.
Click to expand...
Click to collapse
Search foe it again, but use the advanced search, located in the WFS General forum. In a cooler of hours from now, I might help you, if I got the time.
Sent from a Time Lord, using his TARDIS.
It's funny that about 50 people made a new thread about this problem and none of them took the time to look for a similar situation.
MrTaco505 said:
It's funny that about 50 people made a new thread about this problem and none of them took the time to look for a similar situation.
Click to expand...
Click to collapse
True
Sent from a Time Lord, using his TARDIS.
ok ill try again. I would greatly appreciate the help. Thank you
still no luck :/ all the guides have me running in circles. I did however find one bit of information that might be of use. I appears that my internal memory may be corrupt. That may explain why its not being seen by windows or adb. Any way of fix thing this?
Hi,
I've tried to link my phone up to QPST but ever time I try to add new port it comes up with: There was an error enabling. The port may not be working or maybe busy.
I've put my phone into diag mode using this guide- http://forum.xda-developers.com/showthread.php?t=1619314 and it didn't give me an error so I assume it's in Diag mode.
I then booted it into fastboot went to device manager and noted down the com port (com1) and I tried to add it in QPST to be greeted with the error mentioned above.
Any help would be much appreciated as I am a beginner.
Regards,
enya123101 said:
Hi,
I've tried to link my phone up to QPST but ever time I try to add new port it comes up with: There was an error enabling. The port may not be working or maybe busy.
I've put my phone into diag mode using this guide- http://forum.xda-developers.com/showthread.php?t=1619314 and it didn't give me an error so I assume it's in Diag mode.
I then booted it into fastboot went to device manager and noted down the com port (com1) and I tried to add it in QPST to be greeted with the error mentioned above.
Any help would be much appreciated as I am a beginner.
Regards,
Click to expand...
Click to collapse
The problem is that there is no Qualcomm modem or SoC to speak of.
oh thx bro
Hi,
Thanks for clearing it up! You saved me alot of wasted time. Are there any utilities that allow me to do the stuff that QPST does? I would like to debrand the phone from all the 02 nonsense that it's been sold to me with. I've done googling and I've found custom roms debrand although I'm not confident with roms as I hard bricked my old Galaxy.
Regards,
enya123101 said:
Hi,
I've tried to link my phone up to QPST but ever time I try to add new port it comes up with: There was an error enabling. The port may not be working or maybe busy.
I've put my phone into diag mode using this guide- http://forum.xda-developers.com/showthread.php?t=1619314 and it didn't give me an error so I assume it's in Diag mode.
I then booted it into fastboot went to device manager and noted down the com port (com1) and I tried to add it in QPST to be greeted with the error mentioned above.
Any help would be much appreciated as I am a beginner.
Regards,
Click to expand...
Click to collapse
QPST is something to do with Qualcom?
This forum is for the quad core Tegra 3 One X, not the dual core Snapdragon. If you can't find the right phone, I'm not surprised you bricked one. Anyway, bricking an HTC is harder due to the bootloader, but I wouldn't recommend you try it.
enya123101 said:
Hi,
Thanks for clearing it up! You saved me alot of wasted time. Are there any utilities that allow me to do the stuff that QPST does? I would like to debrand the phone from all the 02 nonsense that it's been sold to me with. I've done googling and I've found custom roms debrand although I'm not confident with roms as I hard bricked my old Galaxy.
Regards,
Click to expand...
Click to collapse
ROMs are the only way until we can change the CID.
So i've been trying to sim unlock my ls980 for about 3 days now i've tried the > http://androidfannetwork.com/2014/03/05/sim-unlock-your-sprint-lg-g2-for-gsm/ < guide aswell as ones that were just like it with more steps and nothing so i restored my phone through lg recovery and re-rooted
still searching for a way to gsm unlock the phone i stumbled on this thread
http://forum.xda-developers.com/showthread.php?t=2729370
yay i found it right ... wrong once i installed autorec everything was running fine until i actually tried to boot into recovery mode...
when i powered down my phone and went to turn it on i got pushed into fastboot hours i spent banging my head against my desk trying to get past this step... because recovery mode was gone and download was broken so i found a thread about flashing the laf file and bam download mode is now fixed.. great! but now no matter what i do my computer wont locate the drivers for me to try and connect to it and use lg flash tool or even lg's recovery tool i have unistalled re installed lgs united drivers over and over again on 2 different computers trying to get them to read the phone
i've tried going into device manager and pointing them to the lg folder nothing... i've been searching google trying to find an answer and found nothing that seems to help..
so if anyone has any ideas that would be helpful i would be really greatfull
i used this one
http://forum.xda-developers.com/showthread.php?t=2655133
its easy
me used on 4.4.2 stock rom
I need help getting my computer to read the phone so I can flash the stock firm ware so I can actually do that as of right now the phone is locked in either fastboot or download mode
Did you change the com port to 41?
Sent from my LG-LS980 using XDA Free mobile app
The phone doesn't show up as a comport is the problem it shows up under other devices if I remember correctly with yellow exclamation marks. And I can't figure out how to get the drivers to read it
I've uninstalled them reinstalled them countless numbers of times I tried another computer different usb ports
I tried pointing the drivers to the LG folder and still,nothing
Chieselberry said:
The phone doesn't show up as a comport is the problem it shows up under other devices if I remember correctly with yellow exclamation marks. And I can't figure out how to get the drivers to read it
I've uninstalled them reinstalled them countless numbers of times I tried another computer different usb ports
I tried pointing the drivers to the LG folder and still,nothing
Click to expand...
Click to collapse
did you try the tmobile drivers? (after you install that, then go to the devices with the yellow and update drivers automatically, it should work
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
mitch1490 said:
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
Click to expand...
Click to collapse
Sorry this is for the desire.
Saf98 said:
Sorry this is for the desire.
Click to expand...
Click to collapse
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Help
mitch1490 said:
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Click to expand...
Click to collapse
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Avan7 said:
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Click to expand...
Click to collapse
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
Thanks a lot! I am going to give it a try .
Blessings.
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
n3m37h said:
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
Click to expand...
Click to collapse
please try removing the battery first.
mitch1490 said:
please try removing the battery first.
Click to expand...
Click to collapse
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
n3m37h said:
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
Click to expand...
Click to collapse
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
This is a forum for the HTC Desire Bravo A8181.
This is a forum for the HTC Desire Bravo A8181.
See with your own eyes.
Help please
mitch1490 said:
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
Click to expand...
Click to collapse
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Metal Addict said:
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Click to expand...
Click to collapse
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
mitch1490 said:
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
Click to expand...
Click to collapse
What version of SP Flashtool are you using?
Well I have tried everything everyone has said so far
No matter what I try I get
BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (2004)
[H/W] Fail to download DA to baseband chip's internal SRAM!
Have tried using both
SP_Flash_Tool_v5.1352.01
SP-Flash-Tool-v5.1532.00
Both do the exact same thing, tried checking the AD DL ALL with Checksum boxes, unchecked usb high speed and full speed. Pressing the down button before plugging it it, after. Nothing I do seems to work, in the device manager it just keeps appearing and disappearing over and over
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (http://mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : http://easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: http://4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Hi
I have desire 200 won't turn on,stay in HTC logo
I just have recovery and fastboot with hboot 1.20.0000,,,s-on
I want to flash any ROM on it
Any one help me,please?
Sent from my V3 Plus using Tapatalk
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: 4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
You my friend are a gentleman and a scholar! downloaded and flashed right away and booted up Am on Win 7 x64 Pro
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Leoisback said:
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Click to expand...
Click to collapse
Yeah I forgot to mention that, you need to use the DA_SWSEC on the SP Flashtool. What's your htc 320 model? Your probably have the wrong rom. The telus one is only for NA device.
EDIT: Are you using the HTC Desire 320 with dual sim: http://drop.ndtv.com/TECH/product_database/images/15201573649PM_635_htc_desire_320.jpeg
If this is your device, the Telus rom is not for your device.
This is the EU rom: http://www.mediafire.com/download/z...NSE53_htc_europe_1.00.401.3_by_jamesjerss.zip