Related
I bought a new laptop and it's 64 bit running Windows 7. I'm trying to install the 64 bit USB driver & get it to recognize my phone but it simply won't work.
The following two things keep running and running with the words "installing driver software" after them:
CDC Abstract Control Model (ACM)
S3C6410 Android ADB
I have no idea how to get this to work so any advice is greatly appreciated!
ps - USB debugging is checked in my application settings.
There are lots of people having problems with 64 bit windows nit recognizing the epic. My suggestion is to try.another USB cable. I use my wife's evo cable and it works fine for me. Good luck man just keep trying. Try different ports, cables and also check.to.make sure the USB slot is clear from any obstructions.
Sent From My Evo Killer!
musclehead84 said:
There are lots of people having problems with 64 bit windows nit recognizing the epic. My suggestion is to try.another USB cable. I use my wife's evo cable and it works fine for me. Good luck man just keep trying. Try different ports, cables and also check.to.make sure the USB slot is clear from any obstructions.
Sent From My Evo Killer!
Click to expand...
Click to collapse
I've done all those things.
Install the 32-bit drivers even if you're on a 64 bit computer
iSaint said:
Install the 32-bit drivers even if you're on a 64 bit computer
Click to expand...
Click to collapse
I was going to try that but didn't want to screw anything up...so that should work then?
droid newb said:
I was going to try that but didn't want to screw anything up...so that should work then?
Click to expand...
Click to collapse
Yes, I have 64bit computer and mine works with 32bit drivers.
Doing the same thing with 32 bit that it does with 64 bit.
droid newb said:
Doing the same thing with 32 bit that it does with 64 bit.
Click to expand...
Click to collapse
Here is a link to the drivers I installed on my Win 7 Ultimate 64bit machine. (i put them on my google documents site)
https://docs.google.com/leaf?id=0B8DFupwiCOXyMGViMDJmY2MtMGU4YS00MGY5LWFkOGItNjkyMDY3MjkyNjgx&hl=en
I have had no issues using odin or mass storage.
Hope this helps, good luck
jdelano said:
Here is a link to the drivers I installed on my Win 7 Ultimate 64bit machine. (i put them on my google documents site)
https://docs.google.com/leaf?id=0B8DFupwiCOXyMGViMDJmY2MtMGU4YS00MGY5LWFkOGItNjkyMDY3MjkyNjgx&hl=en
I have had no issues using odin or mass storage.
Hope this helps, good luck
Click to expand...
Click to collapse
That's the same one I've been trying all this time. I just don't understand why this won't work.
The ACS Module has never installed for me but my device works fine
watermoore said:
The ACS Module has never installed for me but my device works fine
Click to expand...
Click to collapse
So would you be able to Odin back to stock if you needed to?
droid newb said:
That's the same one I've been trying all this time. I just don't understand why this won't work.
Click to expand...
Click to collapse
When you ran the setup for the driver, did you run it as administrator?
Right click on setup.exe and select that option from the menu.
Sorry you're having such a bad time, that has got to be mega-frustrating.
I've read also, that some people run the 32 bit drivers on win 7 64bit and they report that they work for them just fine.
hey man i feel your pain. I have been having the same exact problems as you. I also have tried the 64 bit/32bit drivers, uninstalling/reinstalling them, everything i can think of or have been told to do to no avail. It use to work fine until i got the first froyo update eb13 and ever since its been like this. My laptop keeps telling me to replace my device.
I did get on a computer at work with win XP and i plugged my phone into it and the device installed but im not sure about the drivers. Im limited to what i can do at work. So maybe it has something to do with windows 7 cause my laptop is brand new as most people having this problem are to.
Did the drivers change after the EC05 update. Neither of my computers will recognize my phone now after I updated the modem. I even tried reinstalling the links you have in this post and updating drivers and still a no go.
I just had this problem recently. It wasn't the drivers - instead, it was the USB port I was using. If you're on a desktop, try a usb port on the back of the pc. If you're on a laptop, give all the usb ports a go.
Sent from my SPH-D700 using XDA Premium App
I am on a laptop and i have repeatedly try all usb ports and still a no go. It really seems like something changed after EB13 cause i never had a problem before.
dazednconfused1144 said:
Did the drivers change after the EC05 update. Neither of my computers will recognize my phone now after I updated the modem. I even tried reinstalling the links you have in this post and updating drivers and still a no go.
Click to expand...
Click to collapse
Nope; I have a win7 ultimate 32 laptop and a win 7 ultimate 64 desktop. Both see my phone just fine. Same drivers from when I first rooted after xmas to DK28 from 2.1.
I have heard of people having an issue with something bent on the phone's usb connector, it stops from getting full connection.
I'm having the same issue, but I can connect when I uncheck USB debugging. With it checked, it won't connect. I'm trying to root with 2.5.5...
jerbeck24 said:
I'm having the same issue, but I can connect when I uncheck USB debugging. With it checked, it won't connect. I'm trying to root with 2.5.5...
Click to expand...
Click to collapse
That worked!!!!!!!!!!!
Wooooooooooooooooooo!!!!!!!!!!!!!!!!!!!
droid newb said:
That worked!!!!!!!!!!!
Wooooooooooooooooooo!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
No problem...problem for me is, it needs to be checked in order to root...
I'm just going to odin back to EB13 and CWM3 and restore my latest back up of ACS 1.0.2
Hi I have a epic. Rooting for the first time... I have put the phone into debbuging. I have installed the drivers. I have downloaded one click root from xda. I either get phone is not connected or rage the cage file is missing. and is there any way i can pay for the root to get done. Plz help.
Thanks in Advance.... C- Flo
Delete ur current root files, unzip the files again, shut off ur anti virus and try it again. Be patient. It takes a little while. Tomorrow afternoon I will be making a how to video on how to properly root the epic and install a custom rom.
Sent from my SPH-D700 using XDA App
Also if it says phone is not connected make sure the drivers are installed correctly on the pc
Sent From My Evo Killer!
musclehead84 said:
Also if it says phone is not connected make sure the drivers are installed correctly on the pc
Sent From My Evo Killer!
Click to expand...
Click to collapse
Chances are musclehead84 is right, in my personal exprience, I had to reinstall the driver serveral times in order to make it work...
Ohh and something I noticed with my netbook is that only one of the usb ports actually works with my phone, so maybe it is the same for you.
Try this (and please anyone correct me if I'm wrong):
1)re-install the drivers just to make sure everything is okay
2)plug in your phone to all the different usb ports until you actually manage to get your computer to read your phone and you are able to transfer files from your computer to your phone's sd card with the usb cable
3)once you figure out what ports work with your phone, unplug your phone, extract the file again and enable usb debugging via settings>application>development>usb debugging
4)plug in you phone and run the program and BE PATIENT it does take a while...I have already prima-bricked my phone form being impatient and panicing while flashing my phone with odin (not to scare you)
Hope it helps
Sent from my SPH-D700 on the new syndicaterom frozen 1.1.0 with twilight kernel 1.1.0 @ 1.3 ghz!!! using XDA App
I've been trying to root my epic 2.2 with gingerbreak and it doesn't work. I've done It before and now it says "Not sure what happened.exploit failed or reboot failed. Reboot manually and see if you have Superuser" I did everything right
Does anyone know how to fix this?
mummer96 said:
I've been trying to root my epic 2.2 with gingerbreak and it doesn't work. I've done It before and now it says "Not sure what happened.exploit failed or reboot failed. Reboot manually and see if you have Superuser" I did everything right
Does anyone know how to fix this?
Click to expand...
Click to collapse
Use the 1 click
Sent from marcusantrom v5
marcusant said:
Use the 1 click
Sent from marcusantrom v5
Click to expand...
Click to collapse
Which one?
The one for cwm 3.0.2.5
if you cant live large, look big in the coffin!!!
Also, supposedly, gingerbreak only works on phones that have odined to ec05. That's the consensus at least.
Sent from my perfect epic
musclehead84 said:
The one for cwm 3.0.2.5
if you cant live large, look big in the coffin!!!
Click to expand...
Click to collapse
I keep getting "phone not connected" any suggestions
I have tried all available options for troubleshooting and can not figure it out. The drivers are good, different cords, different Root techniques, I mean everything ... but my phone won't connect even after re-installing the samsung drivers.
Windows Vista
64 bit
phone EC05
firmware 2.2.1
stock everything
hooover said:
I keep getting "phone not connected" any suggestions
I have tried all available options for troubleshooting and can not figure it out. The drivers are good, different cords, different Root techniques, I mean everything ... but my phone won't connect even after re-installing the samsung drivers.
Windows Vista
64 bit
phone EC05
firmware 2.2.1
stock everything
Click to expand...
Click to collapse
Did you try a different usb port or a different pc, if available?
Sent from my perfect epic
zanderman112 said:
Did you try a different usb port or a different pc, if available?
Sent from my perfect epic
Click to expand...
Click to collapse
I have tried all ports on my PC, no I haven't tried to use another PC though.
I just Rooted my friends brand new epic 10 days ago. I just can't figure out how to make my device connect as itself instead of "unknown"
Try the Bonsai MasterKey Unlocker, you will like it better than the stock CWM 3.0.2.5
Sent from Bonsai 7.1.1.1
I am also going thru the same senerial a you... if you find a "fix" for this will you please reply....like wise from me. I have even tried putting th e epic in "DL" mode. But odin does not acknowlege my phone. Hit me up . Thnx.
Sent from my SPH-D700 using XDA App
Get a better usb cable radioshack has gold tip usb cables they always work. Or go too verizon and buy the usb cable for the droid pro
Top Nurse said:
Try the Bonsai MasterKey Unlocker, you will like it better than the stock CWM 3.0.2.5
Sent from Bonsai 7.1.1.1
Click to expand...
Click to collapse
I second this
pacoz said:
I am also going thru the same senerial a you... if you find a "fix" for this will you please reply....like wise from me. I have even tried putting th e epic in "DL" mode. But odin does not acknowlege my phone. Hit me up . Thnx.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Before Odin can detect it you must first make sure your computer can detect your phone. That way you'll know if the drivers work fine. If it does then get a new USB cable to connect it while using odin. I got a rocketfish usb cable and it works better than the samsung one...or any usb cable such as a blackberry's works fine.
hooover said:
I have tried all ports on my PC, no I haven't tried to use another PC though.
I just Rooted my friends brand new epic 10 days ago. I just can't figure out how to make my device connect as itself instead of "unknown"
Click to expand...
Click to collapse
When trying to root make sure you aren't using a stock samsung usb cable. Some have been successful using them while rooting but for most it sucks. Are you enabling usb debugging?
I am having the same problem. Gingerbreak failed to run with the same error, and no amount of different cable or port (tried three of each) will avoid the phone not connected message when attempting one click root. I'd love to hear ideas to resolve either of these or other rooting options.
Update - tried the Bonsai unlocker mentioned in this thread, and tried the one click method on a second machine to which I had never connected my device. In all cases, got a phone connection failure. And yes, I have enabled USB debugging, and when I disable it, I am able to mount the phone just fine and see the external memory card, so there's nothing wrong with the USB port or cable. I have a relatively new replacement phone that came preloaded with Froyo. Maybe something has been done to newer devices to disable this ability? Can't imagine what else could be wrong.
thanks,
-- robert
rmingee said:
I am having the same problem. Gingerbreak failed to run with the same error, and no amount of different cable or port (tried three of each) will avoid the phone not connected message when attempting one click root. I'd love to hear ideas to resolve either of these or other rooting options.
Update - tried the Bonsai unlocker mentioned in this thread, and tried the one click method on a second machine to which I had never connected my device. In all cases, got a phone connection failure. And yes, I have enabled USB debugging, and when I disable it, I am able to mount the phone just fine and see the external memory card, so there's nothing wrong with the USB port or cable. I have a relatively new replacement phone that came preloaded with Froyo. Maybe something has been done to newer devices to disable this ability? Can't imagine what else could be wrong.
thanks,
-- robert
Click to expand...
Click to collapse
My bad - apparently I didn't have the right drivers installed. I assumed since I could connect in USB mode without debugging I had the right drivers, but apparently not. Sorry to bother. In case anyone else runs into this, I apparently can't post a URL to help you, so go look for a post on the Epic "All Things Root" forum on Android Forums,
It appears I am successfully rooted after having to reboot the phone once after a failure the first time I ran. Woohoo! Now I can do a true full backup.
-- robert
The only way I could get mine to work (I would get the same errors using gingerbreak) I restored the phone to factory settings using the samsung recovery mode. Press power volume down and camera button. Your volume buttons are used to highlight the text and the home key is used to select. Wipe cache 3 times, and wipe the dalvick (spelled wrong) 3 times, then reset phone back to factory settings through here. Remember you will lose everything so back up your apps using AppBrain. I ran GingerBreak again and it worked perfectly. I would also get the same errors when trying to odin. Its been that way everysince I updated to 2.2. By the way I am EC05, did that before I updated because I was running midNight Rom.
Sent from my SPH-D700 using XDA App
I am trying to re-root my Epic after flashing to stock so I could take it into Sprint for repair. I plug it into my netbook running Windows 7 64bit and everything seems to install fine except this thing called "CDC Abstract Control Module ACM". It seems to find the drivers fine and even gets to the place where it says "Installing Driver Software", but then it hangs forever. I tried just running the CWM One click root, but it says "Phone not connected".
Anyone know what this CDC is and how to make it install? I have tried a few times doing system restore back to before I installed the Samsung drivers, then started over from scratch. But, nothing seems to work.
The Lepricon said:
I am trying to re-root my Epic after flashing to stock so I could take it into Sprint for repair. I plug it into my netbook running Windows 7 64bit and everything seems to install fine except this thing called "CDC Abstract Control Module ACM". It seems to find the drivers fine and even gets to the place where it says "Installing Driver Software", but then it hangs forever. I tried just running the CWM One click root, but it says "Phone not connected".
Anyone know what this CDC is and how to make it install? I have tried a few times doing system restore back to before I installed the Samsung drivers, then started over from scratch. But, nothing seems to work.
Click to expand...
Click to collapse
For the oneclick root make sure your phone has usb debugging enabled
Sent from my Epic 4G using XDA Premium App
Thank you.
I do have debugging on.
Sent from my SPH-D700 using XDA Premium App
mine hung on that too... wish I still had an old copy of the drivers, I swear they changed. Either that, or one other thing is that when I did the same as you about a month ago, I hadnt installed the Android SDK yet... come to think of it, idunno why, I THINK we still need it, but maybe not. Whenever I get issues with drivers installing, I uninstall them, reboot PC, reinstall, reboot PC, plug in epic, let it install drivers till it hangs, then quickly pull out then re-insert the USB in the phone and it sometimes will trip it up and complete the install. Also, now that I think of it, I was having issues installing drivers with the epic running a GB leak, as soon as I Odined to EC05 (using a different PC) they seemed to install fine. Hmmm... just reread your post, coffee THEN post, thats a good tip, anyways, maybe try the different ports on the PC, etc... I think the drivers are the biggest ***** of the whole process... everything else works pretty easily.
Weird I had the same problem I just unplugged my phone restarted my computer and phone and when I plugged it in I had not problems....try restarting both...also what method are u using to root??? And are u on EC05???
Sent from my SPH-D700 using XDA App
I have tried the one click cwm 2.5 and the newer cwm 3.**.
Have tried rebooting pc and then it will not even recognize any new hardware but still shows phone not connected.
Sent from my SPH-D700 using XDA Premium App
The Lepricon said:
I have tried the one click cwm 2.5 and the newer cwm 3.**.
Have tried rebooting pc and then it will not even recognize any new hardware but still shows phone not connected.
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
I had the same problem when I installed the drivers. Fortunately, I watched one of qbkings videos (where he talks about replacing the USB cable). I bought a new micro-usb cable and have never had a problem since. So really, the thanks goes to qbking for the great vids.
I am trying to connect my galaxy s3 to my windows computer and it will not install the drivers. Has anyone experienced this yet. I am rooted and running cm9 nightly. I also have a custom kernel installed. This was working when i rooted a couple of weeks ago. When I plug my phone into the usb it searches for drivers and display an error message that say it was unsuccessful at installing drivers. Any help would be greatly appreciated.
Have you tried uninstalling and reinstalling kies? I got a pop up on my phone when i plugged it in last time and it said it couldnt find the software but yet i was able to connect to kies and go into phone through windows.
Sent from my SGH-T999 using Tapatalk 2
Since I got my phone it hasn't connected to my pc. I have the drivers but I get a "hardware id missing" error. I've uninstalled and reinstalled the drivers but it won't connect. Works fine in ubuntu tho. Idk
Sent from my SGH-T999 using xda app-developers app
Uninstall Kies if you have it. And install drivers again. That should do the trick.
Sent from my SGH-T999
crushbox311 said:
I am trying to connect my galaxy s3 to my windows computer and it will not install the drivers. Has anyone experienced this yet. I am rooted and running cm9 nightly. I also have a custom kernel installed. This was working when i rooted a couple of weeks ago. When I plug my phone into the usb it searches for drivers and display an error message that say it was unsuccessful at installing drivers. Any help would be greatly appreciated.
Click to expand...
Click to collapse
I experienced a similar issue, it may have to do with the fact that I didn't wipe cache partition and wiped dalvik cache when installing zip from sd card etc... I don't know what caused it, but nothing I could do (including re-installing drivers a couple of times from KIES and tying it on a different laptop etc.) would fix it until I did a wipe data/factory reset by mistake! (instead of wiping catche partition) ;<( and that seemed to do the job!
Perhaps you may want to try doing a "wipe catche partition" and "Wipe Dalvik Cache" from CWM before tying to go ahead a do a "wipe data/factory reset"?
crushbox311 said:
I am trying to connect my galaxy s3 to my windows computer and it will not install the drivers. Has anyone experienced this yet. I am rooted and running cm9 nightly. I also have a custom kernel installed. This was working when i rooted a couple of weeks ago. When I plug my phone into the usb it searches for drivers and display an error message that say it was unsuccessful at installing drivers. Any help would be greatly appreciated.
Click to expand...
Click to collapse
This occured with me when I was using early build of CM10, the system fails to recognize the MTP and screws the drivers..
I say you revert back to nandroid, and reflash cm9
chrisram88 said:
Uninstall Kies if you have it. And install drivers again. That should do the trick.
Sent from my SGH-T999
Click to expand...
Click to collapse
I have buddy. Several times. And I've never installed Kies. Idk what it even does lol
Sent from my SGH-T999 using xda app-developers app
mikeyinid said:
Since I got my phone it hasn't connected to my pc. I have the drivers but I get a "hardware id missing" error. I've uninstalled and reinstalled the drivers but it won't connect. Works fine in ubuntu tho. Idk
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
have the same problem
I did have that 'hardware ID missing' error suddenly after i was connecting my phone to my laptop just fine. my desktop has no problem. i did a few things that seemed to have fixed it or steps for a solution. I downloaded the TMO Samsung drivers. if you already have it installed, try uninstalling it. If that doesn't work, toggle USB debugging in between connecting and disconnecting from the computer. Other times, toggling USB debugging wouldn't work, so i toggled in between MTP and PTP. i play with a few times til it work. hope that helps. i can't post the link the the drivers yet, but get it from samsung's website.
i'm on gsm r6 and trinity kernel
Since I've gotten the phone I've had to keis air everything. Hardware I'd missing error on every PC/laptop I owned.
Up until yesterday. Plugged it in and keis opened. Connection troubleshooting joppy. It redownloaded and installed drivers. Like if always has...but this time it actually worked and so does my mtp now.
I wonder if its ROM related. Before I was using stock with the problem. The aokp unofficial r6 with the problem.
But now I'm running the official aokp jellybean release and it works.
I dunnnoooooo. Unicorn is mighty!
Sent from my Unicorn powered T999
whatmonster said:
Since I've gotten the phone I've had to keis air everything. Hardware I'd missing error on every PC/laptop I owned.
Up until yesterday. Plugged it in and keis opened. Connection troubleshooting joppy. It redownloaded and installed drivers. Like if always has...but this time it actually worked and so does my mtp now.
I wonder if its ROM related. Before I was using stock with the problem. The aokp unofficial r6 with the problem.
But now I'm running the official aokp jellybean release and it works.
I dunnnoooooo. Unicorn is mighty!
Sent from my Unicorn powered T999
Click to expand...
Click to collapse
I also got mine working last night. But after a reboot I got the same error again. Idk what it means.
Sent from my Galaxy Nexus using xda app-developers app
chrisram88 said:
Uninstall Kies if you have it. And install drivers again. That should do the trick.
Sent from my SGH-T999
Click to expand...
Click to collapse
I tried uninstalling Kies and that didn't work. I have to re-flash CyogenMod to get it to work again. Wierd!
From my experiences it only ever occurs when Kies is running, even in the background, while usb debugging is enabled. If kies isnt running then its all good.
I ran into this using CM9; seems to me that Samsung is using MTP protocol's now instead of USB. I just use Driod Explorer with debugging and I can move files without any issues.
If you are wanting to just transfer files to/from computer try SwiFTP. I love this little program.
Original dev no longer supports but its been picked up by another. Download latest version here.
http://ppareit.github.com/swiftp/
Sent from my SGH-T999 using xda app-developers app
Please help my gs3 won't connect to any computer
I have tried on four different computers to plug my gs3 but phone never show any option on screen and computer never finds phone plugged in. I also used tried with different usb cables and resetting to factory but the result is same. All it does is charging the phone on all computers without any message or options on the screen. I am thinking there is something wrong cause it never found plugged into any computer nor any computer tried to install the driver.
If someone have experienced this please let me know what should I do to connect it to PC?
fix a "hardware id missing" error
1. install latest version of kies.
2. uninstall SAMSUNG USB Driver for Mobile Phones version 1.5.9.0
3. download and install SAMSUNG USB Driver for Mobile Phones 1.5.6.0
4. connect the phone let it install...thats it.
5..open kies update firmware, backup or whatever
pate201 said:
I have tried on four different computers to plug my gs3 but phone never show any option on screen and computer never finds phone plugged in. I also used tried with different usb cables and resetting to factory but the result is same. All it does is charging the phone on all computers without any message or options on the screen. I am thinking there is something wrong cause it never found plugged into any computer nor any computer tried to install the driver.
If someone have experienced this please let me know what should I do to connect it to PC?
Click to expand...
Click to collapse
it turned out that phone is defective, they are getting me replacement.
SOLVED!
crushbox311 said:
I am trying to connect my galaxy s3 to my windows computer and it will not install the drivers. Has anyone experienced this yet. I am rooted and running cm9 nightly. I also have a custom kernel installed. This was working when i rooted a couple of weeks ago. When I plug my phone into the usb it searches for drivers and display an error message that say it was unsuccessful at installing drivers. Any help would be greatly appreciated.
Click to expand...
Click to collapse
:good:SOLVED! Check this thread
Connecting Galaxy S3
mikeyinid said:
I have buddy. Several times. And I've never installed Kies. Idk what it even does lol
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
From talking to Samsung Advanced Technical Help, I learned that, although it is never mentioned on any site or any literature, if you have
Samsung Studio 3 and/or Samsung New Studio and the USB drivers, uninstall ALL. I use Revo Uninstaller. Then reinstall the USB drivers from Samsung site. Make sure WiFi and Bluetooth are turned off,on the phone, and connect the phone. Should work.