Related
Is there a sticky on how to install these programs, Im using the 6.1 and phone is synced, just not sure what to do now. Thanks
biglarge said:
Is there a sticky on how to install these programs, Im using the 6.1 and phone is synced, just not sure what to do now. Thanks
Click to expand...
Click to collapse
http://www.google.com/gmm/index.html?utm_source=us-et-more&utm_medium=et&utm_campaign=gmm
Thanks, but I meant if Im installing these where do I put them on the phone, also Ive tried several times on the keyboard thing for english and nothing worked. Thanks again for any help on this.
biglarge said:
Thanks, but I meant if Im installing these where do I put them on the phone, also Ive tried several times on the keyboard thing for english and nothing worked. Thanks again for any help on this.
Click to expand...
Click to collapse
If its a cab file you're trying to install, copy it anywhere on the phone. Then using file explorer on your phone, click on the cab file and installation will begin.
If its an exe file, these install from your pc through Activesync. On your pc(with phone connected), click on the exe file and it will copy the files to your phone. It will then tell you to check your phone, which will then look like you had just started a cab file installation.
If either cab or exe asks you if you want to install to device or storage card, it should be your choice unless the creator has specified otherwise.
Some files require rebooting the phone after installation. Most will tell you before they reboot, and some creators will tell you its necessary. In this case you should manually reboot it if the installation doesn't automatically do it for you.
just out of curiosity. how did you manage to flash 6.1 on the phone when you are unsure of how to install a simple application?
gixxum said:
just out of curiosity. how did you manage to flash 6.1 on the phone when you are unsure of how to install a simple application?
Click to expand...
Click to collapse
Via distructions maybee?
And curiosity killed the hamster.
Thanks Stylez, couldnt have said it better myself, Later
Very confused
Guys, Ive been reading and experimenting on adding programs and have failed. Ive got 6.1 installed, now Im trying to do the english keyboard and install sirius, I put it on the phone and click on the setup it does a bunch of stuff and thats it. Thanks for any help on this
biglarge said:
Guys, Ive been reading and experimenting on adding programs and have failed. Ive got 6.1 installed, now Im trying to do the english keyboard and install sirius, I put it on the phone and click on the setup it does a bunch of stuff and thats it. Thanks for any help on this
Click to expand...
Click to collapse
what kind of stuff? like does the phone do backflips or break dance?
be a little more specific man..
for the keyboard go look in the sticky ontop of this forum and download the keyboard file to your pc. plug your phone into the pc and let it sync. then take that file and through activesync > explorer put it on your phone
on your phone, go to where that file is located and just execute it..install to device. then reboot the phone when its done installing.
Stop opening new threads for the same topic...first last warning.
Keep using the same thread.
stylez said:
Via distructions maybee?
And curiosity killed the hamster.
Click to expand...
Click to collapse
there are sticky's full of instructions for installing new roms....followed by 1000 pages of the same questions and the same answers.
i wasnt trying to be a jerk.i was honestly asking because id like to know how he installed his 6.1 so we can try to make it a lot easier on n00bs that ask the same questions time and time again. since he seems like a new user, hes the one to ask right?
gixxum said:
there are sticky's full of instructions for installing new roms....followed by 1000 pages of the same questions and the same answers.
i wasnt trying to be a jerk.i was honestly asking because id like to know how he installed his 6.1 so we can try to make it a lot easier on n00bs that ask the same questions time and time again. since he seems like a new user, hes the one to ask right?
Click to expand...
Click to collapse
You honestly think hes the one? I didn't think installing cabs was that hard. Put cab on phone, click on it from explorer, and wait just a bit, Done. I really don't think he is the chosen one. In fact, I would venture a guess that it was pure luck he was able to get 6.1 flashed at all. No offense. I nominate Gixxum to be his personal tutor
which is why id like to know how or what instructions he followed.
I didn't think you was being a jerk, infact i found your answer rather commicle, so i had to reply with comedy, i just imagined he followed the forum thread and think from his answer i was correct? But maybe not?
Biglarge what's the answer?
gixxum said:
there are sticky's full of instructions for installing new roms....followed by 1000 pages of the same questions and the same answers.
i wasnt trying to be a jerk.i was honestly asking because id like to know how he installed his 6.1 so we can try to make it a lot easier on n00bs that ask the same questions time and time again. since he seems like a new user, hes the one to ask right?
Click to expand...
Click to collapse
Im glad you guys are having fun at my expense, this is how I figured it out. It was posted in this forum, I wish I had the name on it, but I give thanks to ever wrote this and am sorry I didnt have the nameHeres how to beat the 270 error.
When running the installer, "push any key" through the first few steps as it says.
When the queue comes up saying "press center key and screen should turn white", "press any key to continue"
FIRST - press any key, to bring up the next queue
SECOND - now push the center button on your phone, and it should turn white
THIRD - push any key on your PC to start the actual flash.
If you do step 2 before 1, it will still continue onto the flash screens, but will Error 270 at 1-10%.....
Hope this helps some of you!
Reply With Quote
This was the little thing that made all the difference for me. I have done my reading. Thanks to alll
Oh and sorry for the second post on same subject .
biglarge said:
Im glad you guys are having fun at my expense, this is how I figured it out.
Click to expand...
Click to collapse
Maybe if next time you are more clear with what you are trying to get help on. We can help you.
Error 720 is/has nothing to do with "Installing programs"
Think about it.
That was regards to gixxum, and in my post of installing programs, I clearly stated installing the keyboard and I believe the sirius program. I am sorry for all the confusion. Later
Mikey1022 said:
Maybe if next time you are more clear with what you are trying to get help on. We can help you.
Error 720 is/has nothing to do with "Installing programs"
Think about it.
Click to expand...
Click to collapse
I know I use a blackjack, but whats the 720 error?
BigLarge: we're just trying to have fun, did you get your cabs installed?
Im almost afraid to say it, but no, I put them on the phone and it seems to install but nothing after that, I have learned to type with what ever text is on there though.
Hi All,
Wonder anyone could built new ROM for ACer E100? Original ROM was having problems, Comm Manager always error.
Regards,
Calvin Lee
calvinljh said:
Hi All,
Wonder anyone could built new ROM for ACer E100? Original ROM was having problems, Comm Manager always error.
Regards,
Calvin Lee
Click to expand...
Click to collapse
You can use E101 Rom and soon will be updated
Edit: Try from this link http://hidemyass.com/files/xv4GF/ it is a 28008 build.
To flash just copy on Sdcard and rename it as flash.bin, during reset keep volume up pressed it start sd card update.
frrfba said:
You can use E101 Rom and soon will be updated
Edit: Try from this link http://hidemyass.com/files/xv4GF/ it is a 28008 build.
To flash just copy on Sdcard and rename it as flash.bin, during reset keep volume up pressed it start sd card update.
Click to expand...
Click to collapse
Hi Frrfba, Thanks bro, wonder you have original file for me to download, as a backup. incase anything happend.
Yea we have.. go ahead and flash
calvinljh said:
Hi Frrfba, Thanks bro, wonder you have original file for me to download, as a backup. incase anything happend.
Click to expand...
Click to collapse
hdubli said:
Yea we have.. go ahead and flash
Click to expand...
Click to collapse
Hi Hdubli, can I have download link please,
http://hidemyass.com/files/xv4GF/ there you can download build 28008 for E100.
The flash for me was alright. Some notes though: the setup of Windows isn't working 100%, it seems to freeze at some point and a dropdownbox wasn't clearly shown. Also, the screen isn't used 100%: pixels at the side aren't used. Also, there seems to be a margin for the letters, as some letters at the edge (still in the active area though) seem to fall off.
edit: seems like something went wrong. I get the top bar showing the icons, but the yellow/orange Windows logo doesn't disappear. Have to do a hard reset I guess.
edit2: did a hard reset and this time I disconnected the phone from computer. Everything worked fine now, except that the outside pixels (about 5 on each side) are still not used. But the dropdownboxes all showed alright and it booted alright and installed extrom alright . Sry for the confusion, very good job on the ROM! Will test some more .
TheEvilVirus said:
http://hidemyass.com/files/xv4GF/ there you can download build 28008 for E100.
The flash for me was alright. Some notes though: the setup of Windows isn't working 100%, it seems to freeze at some point and a dropdownbox wasn't clearly shown. Also, the screen isn't used 100%: pixels at the side aren't used. Also, there seems to be a margin for the letters, as some letters at the edge (still in the active area though) seem to fall off.
edit: seems like something went wrong. I get the top bar showing the icons, but the yellow/orange Windows logo doesn't disappear. Have to do a hard reset I guess.
edit2: did a hard reset and this time I disconnected the phone from computer. Everything worked fine now, except that the outside pixels (about 5 on each side) are still not used. But the dropdownboxes all showed alright and it booted alright and installed extrom alright . Sry for the confusion, very good job on the ROM! Will test some more .
Click to expand...
Click to collapse
To correctly have a good "start" after first rebbot, keep pda disconnetcted from everything.
After calibrate screen, extrom install all the cabs in the rom and after reboot it works good everything.
Keep in kind that the rom is tested (in italian) for 3 weeks withou any problems, let us know if need help.
ciao
Everything works fine for me too now. Thank you for the ROM, great job. Love the new build, it's much finger friendlier!
hdubli said:
Yea we have.. go ahead and flash
Click to expand...
Click to collapse
bro, can upload original e100 rom ? pls help
Hmm there is a problem with ActiveSync: the device doesn't always want to connect. The computer says it is not connected, but the device says it is. After some time or after trying to disconnect, the device just freezes. Annoying .
edit:.
Man hate this. It's really the device, tried 3 computers and they all refuse the connection. They say connecting and then disconnected, while the device thinks it's connected. Really odd, as it worked flawlessly before! Did a clean install and still not working!
TheEvilVirus said:
Hmm there is a problem with ActiveSync: the device doesn't always want to connect. The computer says it is not connected, but the device says it is. After some time or after trying to disconnect, the device just freezes. Annoying .
edit:.
Man hate this. It's really the device, tried 3 computers and they all refuse the connection. They say connecting and then disconnected, while the device thinks it's connected. Really odd, as it worked flawlessly before! Did a clean install and still not working!
Click to expand...
Click to collapse
Bro, this is bug issue, never flash your ROM before you ensure you get your original WWE ROM as default.....
Most importan part, no one is response when my first post, and "they" always told to "flash it, any problem is advise". <--- this part is very funny.
Not sure what you mean calvin, but anyway I reflashed with this custom ROM and it works again. No clue what changed, as a clean boot didn't help. But I'm happy again. And in case something happens, I still have the original ROM so not much risk for me.
edit: ooh no not again. After the first night, it was screwed again. Can't connect anymore :S. Hmm maybe I should go back to default then
TheEvilVirus said:
Not sure what you mean calvin, but anyway I reflashed with this custom ROM and it works again. No clue what changed, as a clean boot didn't help. But I'm happy again. And in case something happens, I still have the original ROM so not much risk for me.
edit: ooh no not again. After the first night, it was screwed again. Can't connect anymore :S. Hmm maybe I should go back to default then
Click to expand...
Click to collapse
Are You using Xp, Vista or else?
Can You check if ActiveSYnc is disconnected when screen goes black (timeout on backlight)? Don't let that Windows Mobile adjust backlight but set it!
In my case never found this kind of problem, but I see in various forum that 6.5 build in some case goes with this problem, for example I got that situation with Vista and with original rom 21840 build.
Apologies for the slightly off topic post, but I don't suppose you guys know of any updated ROMs for the beTouch E200 do you? Would like to get an updated version of WM6.5 on this thing...
The problem is that the computer (tried both Vista and Windows 7) doesn’t connect, while the device says it is connected. Then nothing happens, except that the device freezes after some time or says that any program I want to run isn’t a valid PPC application :S. After a reset everything is fine again, except that I can’t use activesync. This both happens with USB and Bluetooth connection. The connection is also lost when I power off the phone manually. But that rarely happens: it always freezes before I even get to that point and then it doesn’t respond to anything.
Also, when I unplug the device before it freezes, I get an ARM error saying I need to go to some specific memory address or ARM will break. If I go to that address, the phone freezes with screen off, if I let the ARM break (what the...?!) it freezes with screen on .
I just flashed back to original ROM. The first sync is alright. If it stays alright, then definitely the custom ROM can be 'blamed'. If no further is heard, then everything is fine again with original ROM.
TheEvilVirus said:
The problem is that the computer (tried both Vista and Windows 7) doesn’t connect, while the device says it is connected. Then nothing happens, except that the device freezes after some time or says that any program I want to run isn’t a valid PPC application :S. After a reset everything is fine again, except that I can’t use activesync. This both happens with USB and Bluetooth connection. The connection is also lost when I power off the phone manually. But that rarely happens: it always freezes before I even get to that point and then it doesn’t respond to anything.
Also, when I unplug the device before it freezes, I get an ARM error saying I need to go to some specific memory address or ARM will break. If I go to that address, the phone freezes with screen off, if I let the ARM break (what the...?!) it freezes with screen on .
I just flashed back to original ROM. The first sync is alright. If it stays alright, then definitely the custom ROM can be 'blamed'. If no further is heard, then everything is fine again with original ROM.
Click to expand...
Click to collapse
Hi TheEvilVirus, can I know where you download the original WWE ROM?, I need as my backup too. thanks thanks.
I'm sorry, can't give you the location . But if you might need it, maybe something can be arranged .
TheEvilVirus said:
I'm sorry, can't give you the location . But if you might need it, maybe something can be arranged .
Click to expand...
Click to collapse
Hi, may I know what does it mean? How can it be arranged? as in?
Just PM Me .
TheEvilVirus said:
Just PM Me .
Click to expand...
Click to collapse
Hi, may I know what does it mean? How can it be arranged? as in?
Hey Guys,
im not new to rooting i have a nexus one that i rooted perfectly first time around, i am using the OTA simple-root now because my phone version is 1.47.651.1. So step 3 i run the link in my evo browser it doesn't do anything...but one time it did and then step 4 got stuck on "starting part2..." what's going on? i've been trying for hours and hours...please some1 help me i really want to root and get custom roms running.
Thanks guys
Did you refresh the browser page on step 3?
JelloB said:
Did you refresh the browser page on step 3?
Click to expand...
Click to collapse
yea i refreshed it like 10 times but nothing happens...i think its because im using windows 7...should i try on a xp pc?
You can also try unrevoked3, that gets you su permissions then do toasts part 2 then use whiteslacks "how to start over method. Seems the long way around but you can usually avoid the problems simpleroot seems to cause some people.
youngdhillon said:
yea i refreshed it like 10 times but nothing happens...i think its because im using windows 7...should i try on a xp pc?
Click to expand...
Click to collapse
Also when or if i try to run the PC36IMG.zip it says "older version" and it asks to reboot the phone.
youngdhillon said:
yea i refreshed it like 10 times but nothing happens...i think its because im using windows 7...should i try on a xp pc?
Click to expand...
Click to collapse
ifly4vamerica said:
You can also try unrevoked3, that gets you su permissions then do toasts part 2 then use whiteslacks "how to start over method. Seems the long way around but you can usually avoid the problems simpleroot seems to cause some people.
Click to expand...
Click to collapse
can you please give me links to those threads so i don't have to look all over for them? i would appreciate that!!!!
Thanks
Try here... ig you got 147.651.1 will be the bottom . explain step by step , easy and useful
http://forum.ppcgeeks.com/showthread.php?t=123714 (Right now the page is under maintenace) As soon they finish go here and do step by step . Easily
Enjoy it
I have win7 x64 and it worked fine once I refreshed the browser and manually put the files on my SD
Sent from my PC36100 using XDA App
They are easy to find, just run a forum search, use advanced search then forum title only, i dont have the links in front of me i would have to search for them too, you can also try this
http://forum.xda-developers.com/showthread.php?t=701835
This will only work if you have su permissions though. give it a try and let me know how it works. You can also pm me if you like so i can find out exactl where you are in the process.
ok guys good news...i tried the OTA simpleroot on the xp pc and everything went perfectly without any error, my phone is currently updating files in bootloader as we speak, but i have a question how do i user RA recovery instead of clockwork? does it matter or make a difference? or should i just leave clockwork and load a custom rom
personal preference really, i use Ra, just boot to recovery then flash away, either one is good, some say clockwork does not completely wipe ... I havent had any problems with either personally.
I had problems loading DC 3.2.X with clockwork... but ROM manager needs clockwork and is amazing
Sent from my PC36100 using XDA App
ive heard if u connect to wifi during step 3, that will fix your probelm, i had an issue like that too, plus i had one where it said "unable to find device" in part 2
I am having problem in installing the Android in the HTC TP2 6.5, Gen Y boot is working but android is not installing, i am keep getting the error, So can anyone please give me the right android file to install.
thanks
Denny
DENNYPAT said:
, i am keep getting the error,
Click to expand...
Click to collapse
can pls tell us witch error u got? my marble doesn't work today...
DENNYPAT said:
I am having problem in installing the Android in the HTC TP2 6.5, Gen Y boot is working but android is not installing, i am keep getting the error, So can anyone please give me the right android file to install.
Click to expand...
Click to collapse
Download this, extract to the root of your SD. Grab the correct startup.txt. Click haret.exe. Enjoy.
FYI - we can't help with Gen.Y, so if you're having issues with it post in a thread for Gen.Y. XDAndroid has nothing to do with Gen.Y.
arrrghhh said:
Download this, extract to the root of your SD. Grab the correct startup.txt. Click haret.exe. Enjoy.
FYI - we can't help with Gen.Y, so if you're having issues with it post in a thread for Gen.Y. XDAndroid has nothing to do with Gen.Y.
Click to expand...
Click to collapse
I want to crash my tilt2 against the wall ,but before that I would like try android in it , dou know if android work with wifi in tilt2 ? I been told there is no wifi using android in tilt2 , thanks
jsaid said:
I want to crash my tilt2 against the wall ,but before that I would like try android in it , dou know if android work with wifi in tilt2 ? I been told there is no wifi using android in tilt2 , thanks
Click to expand...
Click to collapse
Uh... who told you that? There's certain devices that have a wifi init issue, but it's not all of them.
Wifi has been working for a very long time... For all phones AFAIK, other than a few that had that init issue.
Typing from XDAndroid Tilt 2 and I can safely confirm that WIFI does work. Everything pretty much works including CAMERA and backlight.
Sent from my MSM using Tapatalk
I've followed these instructions, however when I run HaRet.exe and attempt to boot linux the phone freezes. Does anyone have an idea of what I can do to fix this?
How to recalibrate the touch screen
andrewwd said:
I've followed these instructions, however when I run HaRet.exe and attempt to boot linux the phone freezes. Does anyone have an idea of what I can do to fix this?
Click to expand...
Click to collapse
fixed the problem, i was still overclocking in windows. Now i am having trouble with the touch screen calibration, could anyone help with that?
andrewwd said:
fixed the problem, i was still overclocking in windows. Now i am having trouble with the touch screen calibration, could anyone help with that?
Click to expand...
Click to collapse
Delete the ts-calibration file and boot again. Should force you to calibrate on first boot.
I heard some of the newer kernels cause issues with calibration - you should only have to ever calibrate once (assuming it's a good calibration) - just backup the file once you get a good one, and reuse it over and over.
So if you can't get it to calibrate, revert to an older kernel, get a good calib file, and save/reuse it.
It runs so slowly and freezes all the time.
What's wrong?
laurisan said:
And old OS stays and if ia restart my phone I can choos which system to choose?
Click to expand...
Click to collapse
WinMo stays. When you soft reset (from the pin or pulling the battery) you will be brought back to WinMo. Then you can just run haret again, and you're back in Android.
There's a dual-boot app - if you wish, just don't ask for support here. Post in the thread related to the tool. It's called Gen.Y.
arrrghhh said:
Download this, extract to the root of your SD. Grab the correct startup.txt. Click haret.exe. Enjoy.
FYI - we can't help with Gen.Y, so if you're having issues with it post in a thread for Gen.Y. XDAndroid has nothing to do with Gen.Y.
Click to expand...
Click to collapse
OK I am DLing this.
I really want to try this out on my ATT Tilt2. Currently running winmo energytom...
Where do I grab the correct startup.txt ????
Any help appreciated!
Prodeje79 said:
OK I am DLing this.
I really want to try this out on my ATT Tilt2. Currently running winmo energytom...
Where do I grab the correct startup.txt ????
Any help appreciated!
Click to expand...
Click to collapse
I believe that bundle has a folder - STARTUPS - just fine your device and use the appropriate startup.txt.
arrrghhh said:
I believe that bundle has a folder - STARTUPS - just fine your device and use the appropriate startup.txt.
Click to expand...
Click to collapse
ah ha! OK and there is a nice readme in there too.
OK so heres the tilt2 startup"
set ramsize 0x10000000
set ramaddr 0x10000000
set mtype 2292
set KERNEL zImage
set initrd initrd.gz
set cmdline "lcd.density=240 clock-7x00.a11=500 msmvkeyb_toggle=off gsensor_axis=-1,-2,3 force_cdma=1 physkeyboard=tilt2 rel_path=andboot"
boot
Click to expand...
Click to collapse
hmmm doesn't force_cdma=1 seem incorrect for a ATT tilt2 on ATT 3g???
So basically create an xandroid directory on my SD card and add the line rel_path=xdandroid to the startup?
And copy those contents to that folder?
OK booting into xandroid, but no cell signal or data.
g sensor or something seems off in regards to landscape mode on my phone....
i will continue to search the forum, but any help appreciated!
I had the same problem, but be patient... After the first Boot give it about 10 Minutes time, then it should work. So it did at my TP2.
But after this installation I could see the new version here http://sites.google.com/site/androidport/downloads downloaded the cab, deleted the old files, deinstalled them via WM 6.5 menu, installed the new files but always get an error Anybody in success with the newest version?
And: Anybody here where bluetooth is working?
pf said:
I had the same problem, but be patient... After the first Boot give it about 10 Minutes time, then it should work. So it did at my TP2.
Click to expand...
Click to collapse
still no dice, says no service after 30 minutes in android.
EDIT: OK found APN info, but still just says searching, I will keep trying to get the APN in the settings.
found these:
http://www.jayceooi.com/2011/01/20/apn-settings-for-android-to-enable-internet-mms/
http://groups.google.com/group/android-developers/browse_thread/thread/7613f4a8cea47ebb
Prodeje79 said:
still no dice, says no service after 30 minutes in android.
EDIT: OK found APN info, but still just says searching, I will keep trying to get the APN in the settings.
found these:
http://www.jayceooi.com/2011/01/20/apn-settings-for-android-to-enable-internet-mms/
http://groups.google.com/group/android-developers/browse_thread/thread/7613f4a8cea47ebb
Click to expand...
Click to collapse
Prodeje79 said:
ah ha! OK and there is a nice readme in there too.
OK so heres the tilt2 startup"
hmmm doesn't force_cdma=1 seem incorrect for a ATT tilt2 on ATT 3g???
So basically create an xandroid directory on my SD card and add the line rel_path=xdandroid to the startup?
And copy those contents to that folder?
Click to expand...
Click to collapse
If you are GSM, force_cdma needs to =0, you are correct. Please change this value accordingly.
Perhaps we need to tear thru the startups and clean them up!
arrrghhh said:
If you are GSM, force_cdma needs to =0, you are correct. Please change this value accordingly.
Perhaps we need to tear thru the startups and clean them up!
Click to expand...
Click to collapse
After a couple of trys it works now!!!!!!!!!!
The APN came in automatically and now my "duplicate" shows on the list too.
OK time to test this out.
I still have a landscape/portrait problem going on.
In settings menus, keyboard hidden, the screen is facing as if keyboard open, but upside down.
any ideas???
Prodeje79 said:
After a couple of trys it works now!!!!!!!!!!
The APN came in automatically and now my "duplicate" shows on the list too.
OK time to test this out.
I still have a landscape/portrait problem going on.
In settings menus, keyboard hidden, the screen is facing as if keyboard open, but upside down.
any ideas???
Click to expand...
Click to collapse
You need to quit posting the same question in multiple threads.
I already answered your question here.
I upgraded my rom to SOS+ previously from SOS-X (Which works great!) now since I did the upgrade everything is working on it except the dialer. When I press the phone button it says "unable to access the application, try to restart GO launcher" I look in my app list and I don't even see a phone in there at all. I tried re flashing it several times, doing a factory reset, I even tried pushing the phone.apk into the system/app nothing works. What causes this to happen? What can I do to get this working?
I take it no one has a solution.:crying:
Discussed in SOS thread. Read it there. Search before making the thread plzzz
death-by-soap said:
Discussed in SOS thread. Read it there. Search before making the thread plzzz
Click to expand...
Click to collapse
Sorry, I barely post on here.