Related
Hello all,
I followed the guide to root my phone that was titled "Idiot proof root quide" that can be found on the androidforums. I then installed fresh 0.3 and I've been running that for a while and had no desire to flash the new fresh roms. Well, now that fresh has released a ROM with froyo at its base I've decided to make the jump.
Yesterday I downloaded and installed the latest rom from fresh (3.1.0.1) but I was unaware that there were new radio updates and kernals to install. This is where I'm running into trouble. For some reason when I have 3.1.0.1 installed my phone wont stay connected to the computer. Once I plug the USB cord in it will ask me if I wan't to charge, disk drive, etc but then 2 seconds later it will disconnect. I've gone back to fresh 0.3 and it works fine.
SO, my questions are:
1. How do I install the latest radio for fresh (please help me with links, I've looked but have become easily frustrated)
2. How do I install the latest kernal with Amon Ra flash (it is my understanding that you need this to install the newest radio/kernal). I understand I need fastbook and the android SDK but I don't think I'm setting these two applications up correctly when I download them.
If you can direct me to any threads that will assist me I will greatly appreciate it.
Thanks!
another way you can try is putting the radios on before you flash the rom to fresh3. I would flash using AMon Ra just because there have been reports of clockwork not fully clearing cache/dalvik. The best way to do this in my opinion is if you have rom manager installed at the bottom you will find flash alternate recovery, use that then try clearing wiping everything and reflashing. If you put the radios on your sd card first jsut boot into froyo once then power down flash radio boot, power down flash wimax. boot.
then try and see if you usb is still having problems. If it is let us know.
Download the radios and kernels you want with your phone, then reboot into recovery. All of them flash like ROMs, just select the zip you want and flash it. Just don't wipe first.
I think the order would be kernel first, then radio, then WiMax if necessary. Always reboot at least between radio and WiMax, maybe after kernel as well.
RyboCollier said:
Hello all,
I followed the guide to root my phone that was titled "Idiot proof root quide" that can be found on the androidforums. I then installed fresh 0.3 and I've been running that for a while and had no desire to flash the new fresh roms. Well, now that fresh has released a ROM with froyo at its base I've decided to make the jump.
Yesterday I downloaded and installed the latest rom from fresh (3.1.0.1) but I was unaware that there were new radio updates and kernals to install. This is where I'm running into trouble. For some reason when I have 3.1.0.1 installed my phone wont stay connected to the computer. Once I plug the USB cord in it will ask me if I wan't to charge, disk drive, etc but then 2 seconds later it will disconnect so I went back to fresh 0.3 and it works fine.
SO, my questions are:
1. How do I install the latest radio for fresh (please help me with links, I've looked but have become easily frustrated)
2. How do I install the latest kernal with Amon Ra flash (it is my understanding that you need this to install the newest radio/kernal).
If you can direct me to any threads that will assist me I will greatly appreciate it.
Thanks!
Click to expand...
Click to collapse
New Radio: http://geekfor.me/evo/radio/baseband-215000728/
New Wimax Radio: http://geekfor.me/evo/radio/wimax-26023r01/
No need a custom Kernel for now, the ROM has its own, if you want a Kernel anyways you can flash Netarchy's Revision 3.7.6c - Froyoized but it has a side effects with the camera pixels!
SilverZero said:
Download the radios and kernels you want with your phone, then reboot into recovery. All of them flash like ROMs, just select the zip you want and flash it. Just don't wipe first.
I think the order would be kernel first, then radio, then WiMax if necessary. Always reboot at least between radio and WiMax, maybe after kernel as well.
Click to expand...
Click to collapse
3 out of 5? lol
Wow, thank you for the quick responses guys/gals! So it seems that I was making this more difficult than it needs to be.
Summary of what I need to do:
1. Flash new kernel if I choose to but each ROM comes with a custom kernel.
2. Flash new radio update.
3. Flash Wimax update.
4. Flash fresh 3.1.0.1
Now, I hope this also solves my USB issue that I'm having which only occurs when I have 3.1.0.1 flashed. I'm going to take omegasun18's advice and see if that will correct my issue.
RyboCollier said:
Wow, thank you for the quick responses guys/gals! So it seems that I was making this more difficult than it needs to be.
Summary of what I need to do:
1. Flash new kernel if I choose to but each ROM comes with a custom kernel.
2. Flash new radio update.
3. Flash Wimax update.
4. Flash fresh 3.1.0.1
Now, I hope this also solves my USB issue that I'm having which only occurs when I have 3.1.0.1 flashed. I'm going to take omegasun18's advice and see if that will correct my issue.
Click to expand...
Click to collapse
well i would do it ......
Fresh rom + radio, the reboot, wimax, then reboot again, then kernel, that's waht i did and have everything working no 30fps cap, wi fi tether and all the stuff (remember about the camera issue)
*edit* remember something, you have to left the custom kernel to the end, because as i told you before the rom has its own kernel and will overwrite any other you installed previously
So leave the kernel to the end? Does that kernel you recommended remove the 30fps cap?
yep make sure if you do a kernal you do it AFTER the rom. the radios shouldnt matteer since msot roms dont acctually change the radios when flashed. but i normaly start with the rom and work my way up but otherwise you have it.
RyboCollier said:
So leave the kernel to the end? Does that kernel you recommended remove the 30fps cap?
Click to expand...
Click to collapse
Well..................
I keep running into an issue where my contacts keep crashing when I open the people application or try to send a text message. Any idea as to why this might be happening?
RyboCollier said:
I keep running into an issue where my contacts keep crashing when I open the people application or try to send a text message. Any idea as to why this might be happening?
Click to expand...
Click to collapse
What rom? did you wipe?
I used unrevoked to root my EVO-4G and put the nightly mod on the sdisk and tried updating in recovery by selecting flash update from sdcard. why didn't it work? Basically it started up the phone and would stay at the splash screen. I fixed it, but I would really like to flash some custom ROMs. I am now running 3.07 with radio 2.15 etc. is there something I am missing? I am somewhat new to this and all the info you can give me would really help.
ps: when I boot in hboot mode it says "Supersonic EVT3 ship s-off, HBOOT 2.02" on the top
You need to wipe your /data and /cache partitions before flashing. The easiest thing to do is download and flash the FORMAT_ALL.zip (search for it on here, I've attached it a few times) and then flash CM.
Here is a link to Calkulin's mods, the Format all zip is in the OP (origianl post).
http://forum.xda-developers.com/showthread.php?t=785271
Also, if formatting doesn't work, try redownloading the ROM, perhaps you got a corrupt downlaod...
mlin said:
Here is a link to Calkulin's mods, the Format all zip is in the OP (origianl post).
http://forum.xda-developers.com/showthread.php?t=785271
Also, if formatting doesn't work, try redownloading the ROM, perhaps you got a corrupt downlaod...
Click to expand...
Click to collapse
Quite right! An MD5sum can verify this. Just run the md5sum command from the command line, or if you're on Windows, use this:
http://code.kliu.org/hashcheck/
Thank you guys, I will certainly try the suggestions above. I did wipe all data/cache before flashing the first time. I thought that maybe the latest nightly ROM didn't have the propper radio version for my phone. Is this a possibility?
Alright, so I flashed the regular CyanogenMod the one that says "stable" because the nightly was just too experimental for me... lol. anyways, it looks the same as the Nightly did, I haven't noticed any problems yet, but how do I dl apps? I do not see a market
camokillin said:
Alright, so I flashed the regular CyanogenMod the one that says "stable" because the nightly was just too experimental for me... lol. anyways, it looks the same as the Nightly did, I haven't noticed any problems yet, but how do I dl apps? I do not see a market
Click to expand...
Click to collapse
You need to flash google apps, which is not included in CM.
edit: here's the link from Doc's signature ... http://goo-inside.me/
Thanks guys, I am on my way... Just a few more questions
On the stock ROM they have a sweet VM app that allows you to listen to them without dialing. how would I do that with CyanogenMod? If there is a way...
camokillin said:
Thanks guys, I am on my way... Just a few more questions
On the stock ROM they have a sweet VM app that allows you to listen to them without dialing. how would I do that with CyanogenMod? If there is a way...
Click to expand...
Click to collapse
If you're talking about the Sprint Visual VoiceMail, if you search in the Themes & Apps section, you can find a download. Otherwise, the most popular voicemail solution is Google Voice, which is what I use.
I dl it from on of the forums THIS ONE and it works great, but I now get a text msg every time I get a vm. is there a better place for me to dl it where this will not happen. I am not satisfied with just blocking that text number like they suggest
edit: and how do I remove this one to add the other one if you CAN help me find a new one that will not text me
Also, i cannot adb to my phone now that it is cyanogen, i uninstalled the drivers and reinstalled the adb/bootloader interface drivers with no success
Ok so, I was flashing CM7-GX4...everything was going fine until I flashed GAPPS, now I'm stuck at two screens alternating between the CM7 boot animation and the screen that says "Welcome to PC36100", upon this screen loading it quickly restarts the CM7 boot animation, so on and so forth. I am able to get into CWM recovery. Please help.
Thank you in advance.
thats a boot loop, looks like you want to wipe everything and try again
elegantai said:
thats a boot loop, looks like you want to wipe everything and try again
Click to expand...
Click to collapse
What if the PC36IMG file is renamed? I changed the name previously per the instructions of some thread I saw somewhere. Could this be the problem?
well you lost me at the hboot image. The only time i have ever had to use a file like that is when i was rooting my phone.
I also do not use cwm, so i am kinda limited in the help i can provide. Did you wipe your system/data/cache before you flashed cm7?
I wiped everything. I've put the SD card in another phone and renamed it back to PC36IMG...lets see what happens LOL
Renamed file back to PC36IMG...still stuck in boot loop
What exactly are you using the pc36img for?
elegantai said:
What exactly are you using the pc36img for?
Click to expand...
Click to collapse
I'm not using it for anything. It's just there from back when I rooted the phone. I had renamed it a while ago. Everything was going fine, install CM7 GX4 ROM, rebooted, attempted to install GAPPS and thats when I got stuck going back and forth between the two screens. I have put the SD card in another phone and renamed it to the original PC36IMG (figuring since I was stuck at a screen saying Welcome to PC36100 it couldnt find the file or something), and I'm still having the same problems. I've wiped and wiped and wiped using CWM and reinstalled CM7-GX4 several times and am still getting the same bootloop.
I'm running a restore from CWM...hopefully that will take me back to a point where I can do something.
yeah, you dont need the pc36img after you root so that is not the problem. My only guess is that cwm is not wiping everything properly or you are missing a step in the install process. I guess you can try a few things:
See if your cwm recovery is up to date (i know earlier versions had issues clearing out properly, but that has since been fixed)
Start back from the beginning of the install process with that rom. Make sure to wipe data, system, and cache, and go back through step by step (sometimes it is easy to overlook a step). Also i noticed in the rom you are using it says to make sure to flash the wi-max kernel, so make sure you do that.
Lastly, I have never used that rom, but if you do not need 4g you can try flashing the actual cyanogenmod nightlies. They are very stable (its what i am running now), and you can grab the latest nightly from:http://mirror.teamdouche.net and grab the gapps from: http://goo-inside.me (universal package)
Sorry to lay a crap load of info on you, but i just don't know what would cause it. A bootloop (which is what you are experiencing with the going back and forth between screens) basically means something did not install right and is making your phone restart over and over.
elegantai said:
yeah, you dont need the pc36img after you root so that is not the problem. My only guess is that cwm is not wiping everything properly or you are missing a step in the install process. I guess you can try a few things:
See if your cwm recovery is up to date (i know earlier versions had issues clearing out properly, but that has since been fixed)
Start back from the beginning of the install process with that rom. Make sure to wipe data, system, and cache, and go back through step by step (sometimes it is easy to overlook a step). Also i noticed in the rom you are using it says to make sure to flash the wi-max kernel, so make sure you do that.
Lastly, I have never used that rom, but if you do not need 4g you can try flashing the actual cyanogenmod nightlies. They are very stable (its what i am running now), and you can grab the latest nightly from: mirror.teamdouche.net and grab the gapps from: goo-inside.me (universal package)
Sorry to lay a crap load of info on you, but i just don't know what would cause it. A bootloop (which is what you are experiencing with the going back and forth between screens) basically means something did not install right and is making your phone restart over and over.
Click to expand...
Click to collapse
I ran the recovery and got back to an old point. I guess I'll try again! Weird that it happened after flashing GAPPS as everything was fine up until that point. I'll grab the gapps from your source. Thanks!
nooomoto said:
I ran the recovery and got back to an old point. I guess I'll try again! Weird that it happened after flashing GAPPS as everything was fine up until that point. I'll grab the gapps from your source. Thanks!
Click to expand...
Click to collapse
Well, i would only use the gapps from the link i provided if you are going to flash the official cm7 nightlies. I wouldnt mix and match! i surely don't want to cause further problems for you! lol. I was reading over that rom and I am not sure why you would need to reboot between installing the rom and the gapps. But again, not familiar with that version!
Sorry i couldnt help more hope you get it!
elegantai said:
Well, i would only use the gapps from the link i provided if you are going to flash the official cm7 nightlies. I wouldnt mix and match! i surely don't want to cause further problems for you! lol. I was reading over that rom and I am not sure why you would need to reboot between installing the rom and the gapps. But again, not familiar with that version!
Sorry i couldnt help more hope you get it!
Click to expand...
Click to collapse
I used the gapps from your source and everything went fine. Thanks again for the help!
no problemo, glad you got it working!
Recently put Jelly Bean on my Kindle - JB flashed, using TWRP, fine and runs great. Gapps will NOT flash, no matter which I use; it fails using TWRP each time, even after clearing cache and even redoing the whole install process.
I figured I would just sideload the Google Play store and any others I needed, but Google Play will not open once installed; it pops open for a split second then closes. I read that installing Talk and signing in would fix this, but after sideloading Talk it does the same thing.
So it seems no Google apps will sideload properly and I also am unable to flash any gapps.zip's.
Any idea? Did I miss something obvious?
Depends...are you using the CM10 gapps?
Also, what version of TWRP are you using?
Yes, CM10 (tried others too) and TWRP 2.
sleep_debt said:
Yes, CM10 (tried others too) and TWRP 2.
Click to expand...
Click to collapse
2.0? 2.1? 2.2?
Also, are you checking the md5s? It's a longshot but worth looking into.
Which version of gapps are you using?
TWRP 2.2 is what I'm using.
Not sure the gapps versions, but ive tried about 5 different ones. All from July and August.
What would I be checking in the md5's exactly?
sleep_debt said:
TWRP 2.2 is what I'm using.
Not sure the gapps versions, but ive tried about 5 different ones. All from July and August.
What would I be checking in the md5's exactly?
Click to expand...
Click to collapse
Make sure it's this version.
http://goo.im/gapps/gapps-jb-20120726-signed.zip
Sent from my Nexus 7 using Tapatalk 2
TWRP 2.2 is still quite new and it is yet unknown of all the bugs that may come with it. Have you tried an earlier version?
Did you find a solution to your problem yet?
sleep_debt said:
Recently put Jelly Bean on my Kindle - JB flashed, using TWRP, fine and runs great. Gapps will NOT flash, no matter which I use; it fails using TWRP each time, even after clearing cache and even redoing the whole install process.
I figured I would just sideload the Google Play store and any others I needed, but Google Play will not open once installed; it pops open for a split second then closes. I read that installing Talk and signing in would fix this, but after sideloading Talk it does the same thing.
So it seems no Google apps will sideload properly and I also am unable to flash any gapps.zip's.
Any idea? Did I miss something obvious?
Click to expand...
Click to collapse
Hi sleep_debt, I was wondering if you have found a solution to this problem yet. I am also having a problem getting access to Google Play. I've tried loading multiple versions of GoogleServicesFramework.apk and Vending.apk, etc. I am able to get them to install, but when I open the "Market" icon it prompts me to create an account and sign in, but it is never able to make the connection. I am also confused by references to the "Google Play" store. I don't have anything called "Google Play" I only have an icon called "Market". So, I think I'm missing something, but I don't know what.
Val
vmallder
vmallder said:
Hi sleep_debt, I was wondering if you have found a solution to this problem yet. I am also having a problem getting access to Google Play. I've tried loading multiple versions of GoogleServicesFramework.apk and Vending.apk, etc. I am able to get them to install, but when I open the "Market" icon it prompts me to create an account and sign in, but it is never able to make the connection. I am also confused by references to the "Google Play" store. I don't have anything called "Google Play" I only have an icon called "Market". So, I think I'm missing something, but I don't know what.
Val
Click to expand...
Click to collapse
Which ROM did you use? The two ROMs I have tried both had an accompanying gapps zip file. I'm using TWP installed by KFU 0.9.6. I installed cm-10 from sgt7-linaro and jdaycane 1.7.2. I flashed the gapps ROM at the same time using TWRP and had no issues.
vmallder said:
Hi sleep_debt, I was wondering if you have found a solution to this problem yet. I am also having a problem getting access to Google Play. I've tried loading multiple versions of GoogleServicesFramework.apk and Vending.apk, etc. I am able to get them to install, but when I open the "Market" icon it prompts me to create an account and sign in, but it is never able to make the connection. I am also confused by references to the "Google Play" store. I don't have anything called "Google Play" I only have an icon called "Market". So, I think I'm missing something, but I don't know what.
Val
Click to expand...
Click to collapse
nmaiorana said:
Which ROM did you use? The two ROMs I have tried both had an accompanying gapps zip file. I'm using TWP installed by KFU 0.9.6. I installed cm-10 from sgt7-linaro and jdaycane 1.7.2. I flashed the gapps ROM at the same time using TWRP and had no issues.
Click to expand...
Click to collapse
Not sure what this issue is, still - have tried every gapps & TWRP version I could find, but TWRP also throws an error when trying to flash gapps.
Also, sideloading the gapps just doesnt work, either, making me think the actual OS flash might be damaged? Been busy lately but plan on just flashing another OS and seeing if that clears it up.
If anyone has any other tips, it would be much appreciated!
Update:
Spent the weekend trying to re-root, flash Jellybean/Gapps to no avail. Same results (when Jelly bean is installed, Gapps will not flash using TWRP 2.2.2). I then wiped everything, leaving only TWRP. Cleared all caches, etc and tried to re-flash Jellybean; now NOTHING will flash successfully and there is no OS anymore, just TWRP.
How can I get an OS back on if TWRP isnt cooperating?
What errors do you get when trying to flash gapps or ROMs?
sleep_debt said:
Update:
Spent the weekend trying to re-root, flash Jellybean/Gapps to no avail. Same results (when Jelly bean is installed, Gapps will not flash using TWRP 2.2.2). I then wiped everything, leaving only TWRP. Cleared all caches, etc and tried to re-flash Jellybean; now NOTHING will flash successfully and there is no OS anymore, just TWRP.
How can I get an OS back on if TWRP isnt cooperating?
Click to expand...
Click to collapse
i would try adb installing twrp 2.2.2.1 and then flashing a rom, i read that the update fixed some issues that your probably having.
callmeshulah said:
i would try adb installing twrp 2.2.2.1 and then flashing a rom, i read that the update fixed some issues that your probably having.
Click to expand...
Click to collapse
That's the version of TWRP I'm using; the error I'm getting when flashing anything is:
* Verifying filesystems...
* Verifying partition sizes...
Error flashing zip 'whateverthefileis.zip'
TWRP errors
I agree with nmaiorana, cm-10 from linaro is not throwing errors like you seem to be running into. Latest version I am using is: 10-20120831-2228. the gapps v that works with this rom is: gapps-jb20120726. In TWRP after clearing cache and dalvik cache, goto to Install, click on the ROM you want to install, then go back to install and click on the gapps file, then slide the button to the right. You can install multiple flash files this way in TWRP. See if that works.
[email protected]@dog
If you've tried reinstalling every version of TWRP and you have tried installing different ROMs and they all return the exact error you posted, try this:
fastboot oem format
...and then reinstall TWRP. If that doesn't work, fastboot may not be working to correctly flash information to the recovery partition. If that's the case you may need to replace your bootloader, but not with fastboot. TWRP probably wouldn't work either and you don't want to open the case to do the shorting trick unless you have to.
My suggestion would be to use adb to install TWRP and see if that makes a difference. If that works and you can flash ROMs normally, replace your bootloader right away.
At least that's what I would try.
Pull the recovery log and see if it gives you more details on what's causing the flash to fail...
Attempt to install the gapps package. After it fails, run the following adb command
Code:
adb pull /cache/recovery/last_log recovery_log.txt
You'll find the recovery_log.txt file in your current working directory. Copy and paste the contents of the log file into pastebin.com and share the URL here.
soupmagnet said:
If you've tried reinstalling every version of TWRP and you have tried installing different ROMs and they all return the exact error you posted, try this:
fastboot oem format
...and then reinstall TWRP. If that doesn't work, fastboot may not be working to correctly flash information to the recovery partition. If that's the case you may need to replace your bootloader, but not with fastboot. TWRP probably wouldn't work either and you don't want to open the case to do the shorting trick unless you have to.
My suggestion would be to use adb to install TWRP and see if that makes a difference. If that works and you can flash ROMs normally, replace your bootloader right away.
At least that's what I would try.
Click to expand...
Click to collapse
kinfauns said:
Pull the recovery log and see if it gives you more details on what's causing the flash to fail...
Attempt to install the gapps package. After it fails, run the following adb command
Code:
adb pull /cache/recovery/last_log recovery_log.txt
You'll find the recovery_log.txt file in your current working directory. Copy and paste the contents of the log file into pastebin.com and share the URL here.
Click to expand...
Click to collapse
will try these in the next few days and see if anything works.
btw, ive tried every recent rom/gapps with no luck, so it doesnt seem to be a version-issue.
Ok I've been reading and reading these threads and have found a lot of great info. Right now my phone is useless so I guess I'm asking for a little more specific info for my current situtation. I used mskip's toolkit to root my phone then followed wwjoshdew's video on how to use goomanager to flash CyanogenMod 10.1.2. Everything seemed to be going fine when I got the spinning blue circle screen then came the "Unfortunately, setup wizard has stopped" and "Unfortunately, the process com.google.process.gapps has stopped". Over and over and over. I can get to download mode and recovery mode but not sure what my next coarse of action should be. This is on an AT&T galaxy s3 originally running 4.1.1. Thanks in advance to any and all help....
I wouldn't use goo manager to flash anything!! U should have flashed straight from recovery, be it cwm or twrp. Did u perform a nandroid backup before u flashed cyan? If so, I would wipe, factory data reset, and install your backup.
Have you tried reflashing Google Apps?
Reboot to recovery, clear cache/dalvik, reflash GApps, clear cache/dalvik again to be sure all is tidy.
Also be sure you have the correct version of GApps; that has messed me up at least once.
Other than that you can always retry the whole process i.e. CM and Apps
Thanks for the replies. I'll try and figure that stuff out. Only reason I've gotten this far was because I was following the toolkit prompts and did the steps in the video as he did them. This is the first time I've tried anything except updating to JB so...
Well, I can't say I've made any progress. I googled correct gapps for cm 10.1.2 and downloaded it but it's like a big collection of stuff that odin won't put in the PDA file spot. I'm not even sure if its the right one. I'm so lost right now. I see all these cwm and twrp recovery files in the toolkit files but not sure if they would help me or not. I know this is fixable since I can still get into recovery and download mode. At this point I would even just go back to stock at least that way I could get rooted again through the toolkit. I'm guess I'm such a noob that I need step by step. I feel like my right arm is missing not having a phone...
Ok I have 2 different versions of gapps that claim to be the right one. I would love to try flashing them to try them out but odin doesn't see them. What am I doing wrong?
Which recovery do u have installed on your phone?
For one dont use odin to flash any custom roms, first download the latest cyanogen mod and gapps, if you need the latest gapps you can get them here. Next you are going to want to boot to recovery and do a factory reset/full wipe then wipe cache/dalvik cache, next go to the top and select load zip from sd card, install cyanogen mod and gapps and reboot the phone.
Ok something different happened this time when I went into recovery. TWRP v2.3.3.1 showed up. I wiped the cache/Dalvik and did the factory reset from there. I have cm-10.1.2-d2att and gapps-jb-20130301-signed ready to copy somewhere. I opened the internal card and saw 8 or so icons that said local disk. so I created a new folder and put the cm and gapps files in there. Does that sound right?
Well that seems to have worked. Rebooted and went through all the google stuff. I'll test everything and see how it works
Glad u got it working!! I usually download Roms straight from my phone, over WiFi of course, and place on the root of the SD card, not in a folder, and flash from there...