Hey everybody
I searched forever and didn't find anything. My problem is a Cognex DataMan 7550 (barcode scanner) which establishes a Bluetooth connection to its base station. I want to bypass that and just get it connected to my htc hd2. I talked to the guys from Cognex tech support and they gave me a step by step installation for Windows xp (using a Dell notebook with Bluetooth) and it works there to pair it. However, if I try it on the htc, I can't connect because I have to put in a key to pair (on Windows I don't). Has anyone an idea how to establish a bluetooth connection on the hd2 without a key?
Thanks a lot!
The Name of the Device on Bluetooth is Taiyo SPP which I guess refers to the manufacturer of the bluetooth antenna and the profile.
Finally gave up. Nobody seems to have an idea on how to connect a bt 2.0 device with no pin to a bt 2.1 device on wm 6.5.
Related
Hi all,
i am runing my trinity with WM6 and AX3l's rom. my issue is that i cant connect to my car stereo which is a pioneer DEH-P55. My trinity see's the stereo and gives the option for hands free but the stereo cant detect the trinity. my device is visible to others but the stereo wont pick it up. Any suggestions for a fix on this would be appreciated.
thanks
corm
maybe you have to push a button on your radio to activate first time pairing, that was the solution for my bluetooth headset.
(pairing from both sides)
just a suggestion, maybe it helps.
Try the Jetware bluetooth extension it has a 30 day trial and worked for my Alpine headunit its at http://www.jetwaremobile.com/
Thanks for the replies, but still no luck. I can pair other phones to the stereo but not this. Are there any settings that i may need to activate on the device that i am missing? its abit infuriating as i need to get this up and running as soon as.
rgds
Corm
activated "receive all incoming beams" ? its in settings/connections/beam
its already activated stormyb but thanks again for helping.
I always had problems using bt and irda...
I never succeed send/receive any file using my pc (my pc irda always worked fine with others devices). Beam enabled on commManager and on settings "receive all incoming beams".
When I try to connect (pair) using (htc) BT I get this error: the connection failed or the passcode is incorrect...
---
One time I tried to send a file to a nokia phone and I needed 30 min to succeed: restart phone, restart BT, restart beam, restart phone, restart nokia, restart BT, restart, restart, ....
Now I'm using the radio 1.46.00.11, rom eLiAs2.11wwe (before I was radio 1.38 and udk rom) and when I pair from htc, on pc I don't receive the pin request. If I pair from pc, I see the request for pin no htc but when I type it: "the connection failed or the passcode is incorrect".
Only one time I was succeed pair (and saved on device list), I typed 3 times the pin code, but after I can't transfer files...
From pc, I see the htc on the device list, if I try the ftp service, htc ask me: "xxx wants to connect with your device using bluetooth. Do you want to add XXX to your device list?" I answer yes but when I insert the pin, the pc give to me this error: "error establishing the connection"
If i try the voice gateway, after type the pin on htc I get this error on pc:
"the remote device closed the connection"
Using this last rom, when I try beam a file, I can't see my pc irda (using the udk rom I can to see but without success), I only see my pc BT but always "failed" the connection.
Nobody has the same problem?!
What bluetooth comms are you using, windows or Widcomm's?
I installed widcomm onto my laptop as I was suffering the same problems as you mention and I couild not get a bluetooth serial port setup either, once installed and restarted the pc then I just powered up both BT's and set the phone to visable and the laptop found it straight away with all the services and could setup the serial port.
I seem to recall there are numerous problems with most BT's when using the default windows drivers etc..
HTH's
hi, I'm using widcomm...
I didn't test again a bt headphone, but I have problems trying to connect to a nokia phone for example (n95, n73).
The irda never works... I tried too with a nokia phone and a remote control software for wm6... nothing...
All ok using headset BT...
I installed blueSoleil BT driver and now it is ok.
same ppc, same rom, same problem with my bt bury in the car and with other ppl's triyng to bt connect to my ppc. i can "see" them they can "see" me but there is no transmission TO me. I can send.
i am using the bt phone (bury) but onlt when I initiate the connection. i think it's a rom bug.
Hi there!
My friend has an Artemis and a VW Passat with a bluetooth radio (VW).
The radio requires sap, which was not supported with the old windows version that was installed on the phone.
We updated it with the newest T-mobile version (it is a t-mobile device) and now he has the sap-settings.
Unfortunately we still have some problems.
The car now finds the phone, the phone connects and both are connected.
Just to disconnect one second later.
We restared the device, we restarted the car, we changed the settings for the file-sharing.
We deleted the connection and connected again.
We still have the problem that the connection is lost one second after connecting.
Does anyone know the probelm and a solution??
Thanks in advance!
Cholera
noone having hte same problem?
I've got a Seat Leon (effectively same company) & i have had no problems connecting to the bluetooth within my car. I do however, have Meschles latest Rom installed & its based on Windows Mobile 6.1 professional - not sure what your T Mobile device is based on ?
I have had this trouble too. I can connect to the car OK but if I disconnect the phone will not restart, then if I try to connect to the passat again it connects and disconnects. Seems to be 6.1 is my problem. When I roll back to origanal HTC WM6 all is OK again. Maybe it is the new SAP becuae the HTC SAP icon is not the same (oldversion?)
I have a passat too. I've tried it with meschles and with mossis rom. There were
no problems with the bluetooth device.
My passat only can connect with bluetooth over the handy holder from nokia which has to plug in the UHV.
No SAP is possible.
So what system is in your passat?
My Passat is 2008 with premium bluetooth factory fitted (with the pop out keypad). I have to talk with my main dealer because they can change the module for a HFP instead of SAP?
For the short time that I had the 8525 with Windows Mobile 5, I was able to have my bluetooth headset ON (either during a voice call or just on standby) and to use ActiveSync via bluetooth simultaneously. Now, only one bluetooth device can connect at a time. It's very frustrating to have to
switch one device off to use the other. I know that the phone supports multiple simultaneous bluetooth connections, but it doesn't seem to work now. Any ideas?
EnigmaticAnswer said:
For the short time that I had the 8525 with Windows Mobile 5, I was able to have my bluetooth headset ON (either during a voice call or just on standby) and to use ActiveSync via bluetooth simultaneously. Now, only one bluetooth device can connect at a time. It's very frustrating to have to
switch one device off to use the other. I know that the phone supports multiple simultaneous bluetooth connections, but it doesn't seem to work now. Any ideas?
Click to expand...
Click to collapse
Why do you have WM5 on 8525?? works waaaaay better with WM6 and will probably fix your issue.
It sounds like you have moved on to a different ROM, and now the bluetooth does not work. If so, which rom have you flashed?
I'm sorry, I left out that vital piece of information. I have the official AT&T/HTC Windows Mobile 6 ROM installed. The reference to WM5 is to explain that back on WM5, I used to be able to have simultaneous Bluetooth connections, but now on WM6, I can not.
Hi, I'm trying to connect my Evo to my Windows 7 laptop so I can use the laptop as a hands-free (better speakers and mic).
It was really easy to pair the Evo, but after that there are no options for connecting?
If you press and hold the computer's name in Bluetooth Settings, the only option is give you is to Unpair. Unless my car and BT handset, where it shows 3 selections (Connect, Unpair, Options).
Has anyone been able to successful pair AND CONNECT their Evo/Android phone to Windows 7?
I got mine to connect once, did it on the laptop side after making phone visible, just transfered some files, doubt it will do what you want without a program on laptop with those drivers that will let it, I doubt it could native
Thanks, yea, on the PC side, there isn't any option to actually connect it?
I can see my phone and it has all the services checked but there's no actual option to connect. Not sure if this is a Win7 or Android issue?
It's the default Windows 7 bluetooth driver; it's not very compatible with smartphones or anything other than some OBEX, headsets, A2DP, etc.
Third-party Bluetooth drivers work OK though, like Blue Soleil.
thanks, that sucks.
hopefully, M$ will improve their bluetooth stack to work better with mobile now that winMo 7 is out.
Running into the next problems when playing MP3 through my PC's speakers through A2DP with my stock Eclair ROM 2.51.1.MB525.Retail.en.GB:
PC Win7 X64, Bluetooth 2.0 EDR stick Belkin F8T012, Widcomm Stack 6.3.0.7900.
Paired the Defy with my PC. The Defy shows as MB525 in "Devices and Printers" when I double-click on the icon, the properties appear. From here, I can initiate the "Music and Audio" connection. The Defy's music now plays through my PC's speakers, and I can control the Defy through my PC (pause, back/forward etc.) with a little window that appears above my system tray. So far so good: splendid audio! Now when I end the connection from my PC in the MB525 property page, the Defy starts playing through it's own speaker again, as it should. Perfect. Now I am able to successfully reconnect in the same way once more, but when I disconnect again, the Defy thinks it is still connected and stays silent. After a while the Defy then reboots (no "M" screen, but showing "android"). Then, I can connect for two more times before this starts over.
Is anybody else experiencing this behaviour?
What I think is also strange: I cannot initiate the A2DP connection from my Defy, have to start that from my PC. With my WinMobile phone the A2DP setup was working as it should, no phone reboots and able to initiate from the phone. I tried with older Widcomm stacks, but the same things happened.
Now I tried the same thing with Bluesoleil 8.0.338.0 which I bought as well. No errors, connection initiates from the phone, BUT: no audio could be heard from my PC's speakers during the connection. I selected the correct sound output option, my PC's sound card. In other words: works perfect but no sound.
With both bluetooth stacks, everything else works ok: FTP, Headset profile (can hear audio through my PC speakers now)....
Can someone help me stopping the android reboots with the Widcomm stack, or tell me how to get A2DP going with Bluesoleil?
Apart from this issue, the Defy is a great phone I think!
EDIT:
Tested the Bluesoleil with ISSC and CSR chipped BT dongles on X64 and X86 as well, everything but A2DP seems to work. Connection between the Defy and Bluetooth stick seems to be OK, but no sound is heard.... Cannot test the other sticks with Widcomm, since this stack is dedicated to Broadcom chipsets nowadays...
After struggling with this for four days, I have been able to solve the problems. I tested with Toshiba bluetooth stack and uninstalled this as well because it did not solve the A2DP problem. Then I uninstalled two devices that were present in the Win 7 "devices and printers" folder, a bluetooth GPS and another PC. After this I reinstalled Widcomm 6.3.0.7900. After pairing I am able to use all of the Bluetooth features of my Defy, including A2DP, FTP and Remote control!! I can even initiate the A2DP connection from the Defy like I used to do with my Windows Mobile phone. Thanks for studying this thread anyway!
Regards, André