Hi there!
My friend has an Artemis and a VW Passat with a bluetooth radio (VW).
The radio requires sap, which was not supported with the old windows version that was installed on the phone.
We updated it with the newest T-mobile version (it is a t-mobile device) and now he has the sap-settings.
Unfortunately we still have some problems.
The car now finds the phone, the phone connects and both are connected.
Just to disconnect one second later.
We restared the device, we restarted the car, we changed the settings for the file-sharing.
We deleted the connection and connected again.
We still have the problem that the connection is lost one second after connecting.
Does anyone know the probelm and a solution??
Thanks in advance!
Cholera
noone having hte same problem?
I've got a Seat Leon (effectively same company) & i have had no problems connecting to the bluetooth within my car. I do however, have Meschles latest Rom installed & its based on Windows Mobile 6.1 professional - not sure what your T Mobile device is based on ?
I have had this trouble too. I can connect to the car OK but if I disconnect the phone will not restart, then if I try to connect to the passat again it connects and disconnects. Seems to be 6.1 is my problem. When I roll back to origanal HTC WM6 all is OK again. Maybe it is the new SAP becuae the HTC SAP icon is not the same (oldversion?)
I have a passat too. I've tried it with meschles and with mossis rom. There were
no problems with the bluetooth device.
My passat only can connect with bluetooth over the handy holder from nokia which has to plug in the UHV.
No SAP is possible.
So what system is in your passat?
My Passat is 2008 with premium bluetooth factory fitted (with the pop out keypad). I have to talk with my main dealer because they can change the module for a HFP instead of SAP?
Related
Hi,
I have problems connecting to my bt headset since I have installed TomTom3. I am running the build3500 bluetooth stack from the 1.06.02 FRA radio. It was working fine without even losing connection with the mda, but after I installed tomtom, it can pair, but cannot connect. The weird thing is that I can sync using bluetooth. I suspect tomtom is keeping busy some of the bt com ports? i noticed that during installation, it required to close bluetooth (cause it said the file BtcoreIf.dll was in use) and as soon as I did that, it finished installation, but since then the headset stopped working. Anyone has similar problems??
Thanks in advance for any input.
Update
Managed to sort it out by upgrading my BT stack to 1.0.0.3900. Still cannot find any similar complaints in any forums. Can it just happen to my MDA III? Who knows....at least it works now, even if my engineering background is not happy with it :shock:
Upgrading the bluetooth stack
Hi,
I have exactly the same problem as you had, although I'm on the UK network Vodafone and have an XDA2s.
My current radio version is 1.06.02 but I can't fine what version my bluetooth stack is. How do I upgrade to 1.0.0.3900?
Thanks in advance for any assistance you can provide.
Hi,
I am using Qtek9090 with TomTom 3.07 and Jabra BT800 headset and have not the problems you people talk about here. I have to mention that I immediately updated my BT version from 2400 to 3900 the same day I purchased the whole stuff. I was - when I was in the shop - told that TomTom 3.07 can sometimes cause problems due to BT version of Qtek (1.0.0.2400) and I better upgrade it to 3500 and/or 3900. I was also told that there were known problems with earlier versions of TomTom wireless (like in your case TomTom 3.03) and that I (at least) had to use TT 3.07 and/or better upgrade the BT driver of my Qtek9090. In order to find your current BT version:
- Click on Bluetooth icon
- Select Bluetooth Settings
- Go to [About] tab
- And there you see your own Build
- You can also select [Advanced] button in [About] for more details
Anyway, once being at home and taking my device out of package I did a BT upgrade to 1.0.0.3900 right away and so far I have no issue with BT stack. Even Jabra BT800 which a lot people complain about works fine with my Qtek9090 (OK, I admit the CallerID at Jabra still not working but I already expected that).
I downloaded the 3900 version of Bluetooth driver (plus another Audio driver) at the following URL in The Netherlands: http://www.pdanieuws.nl/modules/mydownloads/singlefile.php?lid=37
kind regards,
- Avareh ([email protected])
tomtom gps
The problem is that tomtom is messing around a bit with bluetooth for bt gps receivers.
So after installing tomtom allways reinstall the latest bt drivers.
AFAIK you should always use TTN 3.07 (GPS and Navigator) on SE and Phone Edition devices (Blue Angels is both WM2003SE and Phone Edition)
Big Fat TY
I was getting stupid before reading this 3d.
Even went back to the shop with the motorola headset and had them show me it was working....
Tom Tom was the reason.
Avareh said:
I downloaded the 3900 version of Bluetooth driver (plus another Audio driver) at the following URL in The Netherlands: http://www.pdanieuws.nl/modules/mydownloads/singlefile.php?lid=37
kind regards,
- Avareh ([email protected])
Click to expand...
Click to collapse
This link is not working at the moment, is there another link for this, i am running an xdaIIs and installed navigator3 and could bond but not connect to my bt headset.
will try the stack upgrade also a link fopr nav3 3.07 would be handy too...
cheers.
all sorted now, have got the files and fixed the issue.
Hello,
in a few weeks I'll get my new Ford car - equipped with the built-in bluetooth handsfree device. I tried to connect my MDA 3 to this device at several Ford dealers but didn't get any connection.
The MDA finds a "Ford Audio" but can't establish a connection.
Who has any ideas ?
Thanks in advance - Dieter
I have the same problem with a new mondeo...
Everything works with an old nokia 6630 (with a small nokia application I can browse the phonebook as well) but I'm not able to pair the bluetooth ford audio system with my HTC TyTN...
Any ideas?
try using a newer bluetooth stack.
What is a bluetooth 'stack' ?
And how do I change to a newer one?
nfumbruce said:
And how do I change to a newer one?
Click to expand...
Click to collapse
As far as I know, you'll need to update the Radio portion of your device's ROM based software (the basic software that drives the device).
The best bet in your case I believe would be to just grab a new complete update for your device by searching the wiki for downloads for your device. Download a newer official ROM, install it and try again.
You will lose all saved data on the device though so back it up>
Wiki is here http://wiki.xda-developers.com/
Did upgrading the bluetooth stack fix this connectivity issue to Ford Audio Bluetooth Handsfree devices?
Same problem. I've tried to upgrade bluetooth stack: my BA finds "Ford Audio" but doesn't connect. Please give us some help
bicasper said:
Same problem. I've tried to upgrade bluetooth stack: my BA finds "Ford Audio" but doesn't connect. Please give us some help
Click to expand...
Click to collapse
after correct pairing (code 0000), press "Phone" on the caraudio system and then "Menu". After that press left or right joypad on the caraudio to set the "Active Phone". It will search and your phone will be correctly paired.
The last paired phone will be automatically active when you turn on the caraudio system next time.
In some cases will also help to install on the device the JETware application... just try.
Problem Solved!
Thank you dark horse, followed your advice and it worked just fine. I can now connect via bluetooh in my ford.
Can't connect to new Ford Fiesta
Hello to everyone.
I just bought my new Ford Fiesta and I try to connect it with my Sony ARC S but I can't procced with the opperation. I search for new devise on sony, I find the Ford Audio and ask to connect, the Fiesta get it and provide me with the 4 digit code but, my sony doesn't open any keybord in order to write this code to connect so the after few seconds the car regect the connections.
My phone is ARC S LT18i and I had upgrade it to Android 4.0.3
Please any advice will be helpful,
Thanks in advance.
omg nice on there!!!
Thank you dark horse, i had the same problem!!
OX Mobile Spy
The best bet in your case I believe would be to just grab a new complete update for your device by searching the wiki for downloads for your device. Download a newer official ROM, install it and try again.
I have a bluetrek S2 headset, Since I flashed my MDAC III to WM6(B&B) I'm having problems keeping the headset and my device paired. I flashed WM6.1(B&B5.0) to the device but the problem still exist. I can pair them to each oter, and everything works fine. When I turn of the headset( to recharge or to save battery) The connection is lost the next time I turn it back on, I do have to pair them again. First I tough it was my headsets problem, but then I tried to pair a BT GPS mouse, the same result. I have the same problem pairing this GPS with other devices(TyTN, iMate Jamin) running WM6. Does anyone know how to fix this bluetooth problem I'm having?
There might be a connection here (no pun intended). For quite sometime, I was using an old SE637 phone and had it working flawlessly with my Garmin c550 GPS.
During an hour and a half trip yesterday, the Garmin notified me 3 times that the bluetooth connection with the Tilt was lost (the SE profile had already been removed from the Garmin). I never saw this message before with the SE. FWIW, the 2 devices are no more than 2 or 3 feet apart at all times, and neither of them are physically touched during the trip. I'm concerned that this might be an HTC problem. Any thoughts?
smonte said:
I have a bluetrek S2 headset, Since I flashed my MDAC III to WM6(B&B) I'm having problems keeping the headset and my device paired. I flashed WM6.1(B&B5.0) to the device but the problem still exist. I can pair them to each oter, and everything works fine. When I turn of the headset( to recharge or to save battery) The connection is lost the next time I turn it back on, I do have to pair them again. First I tough it was my headsets problem, but then I tried to pair a BT GPS mouse, the same result. I have the same problem pairing this GPS with other devices(TyTN, iMate Jamin) running WM6. Does anyone know how to fix this bluetooth problem I'm having?
Click to expand...
Click to collapse
No one with an possible solution, or at least with the same problem??
Same problem here
I have just received a new HTC TyTN II on Orange that has the same problem. My old one (windows mobile 6.0) had no problem with my Motorola H12, but the new one (Windows Mobile 6.1) can't keep the pairing, and I have to turn Bluetooth on an off to get the connection. Always have to enter the passcode.
Version data is:
CE OS 5.2.19212 (Build 19212.1.0.3)
Processor: MSM7200-400MHz
ROM version 1.65.16.25
G 25.83.40.02H
D 3.28.00.00
Any help /advice much appreciated!
O.
Fixed itself...
This seems now to have fixed itself - I had to enter the password twice in a row for some reason and then it worked properly. So now all happy...
Windows Mobile 6.1 rocks...
Hi, I am trying to get my MDA Compact & SPV M500 to recognise my Bluetooth GPS Unit I bought recently The Unit is A Copilot BT-GPS-365E50. My problem is, I installed Mobile Bluetooth Tools and it installed with no problems. It recognises my GPS Unit, but when pairing the devices the com port setup screen flashes for a moment then disappears. I therefore cannot setup a BT Serial Port. Any suggestions? Is it the GPS Unit? Is it not compatible with my MDA. I have tried this on both my Phones and get the same result. They are both HTC Magicians. I used this process on an XDA II with no problems. I just want to get my SatNav up and running. Hope myou can help and thanks for reading..
use nav n go Igo8
sirftech
Hi!
I also use iGO 8, ith connects automatically. If you like to use tomtom for instance, then I would use the SirfTech tool to establish the connection to your BT-GPS and then run your Nav applcation.
Cheers
Lui
Just wondering if you guys can help
My touch Pro 2
Vodafone UK
ROM - 1.14.161.6 (50207)
Radio - 3.44.25.27
Protocol - 61.25t.25.19U
links to the 2009 BMW 5 series iDrive and reads the phone book I can make calls fine but if I pick up an in coming call using the iDrive controller it makes the connection but there is no sound either way.
If I press the phone answer button on an incoming call then it works perfectly.
It does not do this all the time but its more like 90% can't hear and 10% works fine.
I contacted HTC who said that the phone matches the bluetooth profiles and it should be fine BMW have not got back to me yet (4 weeks so far)
this also happens to some one else I work with and his touch pro 2 on his 2005 BMW with the older iDrive and built in BMW Phoneprep.
another guy with an Audi has no issues at all. I also contacted Bury who make the Uni-System 8 car kits about when they were going to do a cradle for the TP2 and I was informed that they were not planning it at present, I asked why and they said "HTC's bluetooth was flakey"
I put the hard SPL on the phone and upped it to the latest HTC build
ROM - 1.19.707.2 (51489)
Radio - 3.44.25.27
Protocol - 61.25t.25.19U
but have put it back to the Warranty status as it did not make any difference
Any help appreciated
I know Parrto is a different BT HFBTP but I had all kinds of flakey problems until I updated to the latest Radio in the TP2 and upgraded to the latest firmware for the Parrot CK3100 Car Unit.
Try an update to your iDrive system.
More car kit problems
I'm really disappointed by the bluetooth in the TP2. Having just upgraded from a Snap which worked perfectly with all my attachments, the TP2 is a disaster with the car kit in my (new) Volvo. (A bit like the BMW story at the head of the thread.) Won't connect to my TomTom sat nav. Almost works with my Parrot (upgraded as recommended above). Not what you expect from a 'top of the range' piece of kit from htc. I hope there will be a patch for the BT stack. In the meantime I have to revert to my Snap for car journeys. Bizarre.
This happened to me:
If I don´t set up a data connection to my carrier, the link to my bluetooth car kit works perfectly, meaning that I can answer calls and hang up using the button on the steering wheel.
Once I set up a data connection, I can only answer and hangup using the buttons on the telephone. In any case I can listen and talk using the car kit.
TP2
The same issue here. My TP2 won't connect properly to my Volvo V70 2009 BT Car kit. It is connecting and synchronizing but then it won't make call's. (sometimes it suddenly does work). My phone is getting really slow. And somethine the connection fall's away during a conversation. Even when i shut down all data connections on my phone it behaves as mentioned here above. HTC and Volvo just point at each other and a solution seems far away. Yes. I did the firmware upgrades on both sides. At this time i would not recommend the HTC TP2 as a business phone. My collegues have similar issues with other car brands.
Volvo V70 2009 - Firmware November 2009
HTC Touch pro 2 - WM 6.5 UK (and a dutch vodafone office account)
Anyone with a solution? Suggestions? thnx.
My TP2 (unbranded) was working fine until I updated it to WM6.5 (an official release). Now, there are no issues when it gets paired with my son's Mitsubishi Lancer but it refuses to work correctly with my Audi A4. It picks a call but stays silent until charger is connected. Disconnecting of charger "fixes" the situation so I start hearing a call.
Bluetooth wasn't working for me either. Pairing went fine, answering worked, but no sound at all... I followed instructions on this page: http://www.everythingwm.com/forum/moto-q-9c/q9c-and-infiniti-g35x-bluetooth-problem-16833-4.html and now everything works as expected. I'm driving a Renault Espace with a built-in stereo/gps/carkit.
i bought a car kit MP3 player for my car. I paired it with my TP2 and enabled the "BT Audio" and "BT Handsfree". Outgoing calls work fine with no problems at all. But during incoming calls there is a problem. If the incoming call is from someone saved in my contacts, the BT carkit does not ring. If its from an unknown number (not saved in my contacts), it works perfectly. I tried all the tweaks and hacks in this forum but nothing worked. Anymore ideas.