Related
How do you get kernal to overclock g2 to 1.9mhz
Sent from my T-Mobile G2 using XDA App
I thought at those it blows up!!!
Sent from my LG-P999 using XDA Premium App
You need flippys g2 fast kernel, http://forum.xda-developers.com/showthread.php?t=839687
Why do you want to OC to 1.9?
Sent from an ice cream sandwich
For me the 1.9 ghz kernel is a bit unstable for every day use . But oc at 1.5cm kernel works much better and 100% sable and battery friendly if you use profile in setcpu.
stian230 said:
For me the 1.9 ghz kernel is a bit unstable for every day use . But oc at 1.5cm kernel works much better and 100% sable and battery friendly if you use profile in setcpu.
Click to expand...
Click to collapse
Unfortunately, that varies by phone. Mine becomes unstable and 1.5GHZ
liltay53 said:
How do you get kernal to overclock g2 to 1.9mhz
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
I have to say. If you gotta ask dont do it! Make sure you setup good profiles for heat or you run a serious risk of frying your phone! Good luck some people got lucky and have no problems running 1.9. My phone has no problem with that speed until for some reason i have yet to discover somthing makes it heat up at random times. After that happened a few times i decided 1.5 is plenty.
Sent from my HTC Vision using XDA Premium App
I thinks it's underclocked @ 1.9Mhz
Root the phone
Install ROM Manager from the Android Market
In ROM Manager, flash Clockworkmod Recovery
Also in ROM Manager, backup ROM ("nandroid" backup)
Download the kernel and put it on the SD card.
Flash kernel from Recovery
Get SetCPU or CPU Tuner to set the CPU clock
As already mentioned, if you want to OC that high, SetCPU profiles with temp failsafes, etc. are a must. You might want to start with lower CPU clock speeds.
If you need more guides on how to get this done:
http://forum.xda-developers.com/showthread.php?t=916431
The Wiki guide is considered the safest way to root:
http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
kernel manager has it.
Yeah, it does. Unfortunately for me, it's stable for less than five blazingly-fast minutes Guess I'll stay at 1.5!
I think for a phone that was clocked at 800, 1.9 is far too risky. I have no factual basis to say that, just seems like common sense.
Sent from my HTC Vision using XDA Premium App
^I agree^ That doesn't seem logical....
I can't see OC our phones to 1.9 being good on any level. Seems like were trying to push the hardware a bit too far.
Is that how people are able to get Quadrant scores in the 2000+? I can't seem to get that high at all. I have been using pershoot's kernel with CM7...but now on nightly #91- using stock kernel now. I have been cautious on trying out this one...
liltay53 said:
How do you get kernal to overclock g2 to 1.9mhz
Click to expand...
Click to collapse
Why would you want to clock it down to 1.9 MHz when the stock speed is 800 MHz? Even an XT-8086 ran at 5-10 MHz. An 8080 (the year was 1974) ran at 2.0 MHz.....
dhkr234 said:
Why would you want to clock it down to 1.9 MHz when the stock speed is 800 MHz? Even an XT-8086 ran at 5-10 MHz. An 8080 (the year was 1974) ran at 2.0 MHz.....
Click to expand...
Click to collapse
I really think they meant GHz...at least I hope so...
dhkr234 said:
Why would you want to clock it down to 1.9 MHz when the stock speed is 800 MHz? Even an XT-8086 ran at 5-10 MHz. An 8080 (the year was 1974) ran at 2.0 MHz.....
Click to expand...
Click to collapse
Lol, i think he meant GHz, typo =P..
As for quadrant, my DZ easily hits an average of 2100+ when OCed to 1.3GHz using Virtuous G-Lite 1.0.2. I really don't trust those benchmarks though, as long as the battery lasts and the UI is smooth, I can't really complain.
Sent from my T-Mobile G2 using XDA App
Well...ok, I was just trying to make sure I wasn't missing a step. I am happy with my phone's performance, so I will not be concerned about that anymore.
Tommebaas said:
I thinks it's underclocked @ 1.9Mhz
Click to expand...
Click to collapse
Bravo! I can't believe nobody else caught that.
1.9Ghz will sometimes cause my phone to either overheat or crash. I have it set to 1.516Ghz on Pershoot's kernel.
Sent from a Western Union telegram.
Hey guys is it safe to use set cpu to oc evo? or what app would you recommend?
I use set CPU and it is safe to a certain point. If you overclock to far your phone will lock up and you will have to pull the battery. You have to experiment to see how far u can go. My phone is stable as a rock at 1152 MHz but gets llocked up at 1190 MHz so like i said experiement with it
Sent from my PC36100 using XDA App
614 mhz is the new OC! Try over clocking for sure but you see more profitable results under clocking. I do however use set cpu to OC when I am charging
Sent by Supersonic!
Fellas,im looking to use SetCPU to OC my evo,i need a custom kernel i assume.two questions.
1.can i flash a custom kernel using the mount/unmount zip in recovery for my GodMode Synergy?
2.What Are Good Values,im trying to safely underclock to save battery life.
HTC EVO 4G Synergy RC2
--We Are Revolutionary--
@gotheart, I strongly suggest freedom kernel by Lithid. There are bugs as it is in beta stage but he is an amazing developer and will implement an incredible kernel. He has one specifically for godmode so make sure you get that. He has versions that underVOLT the processor, using less battery. Though I would be cautious as some phones become very unstable with these changes.
Underclocking for CPU is variable... I like 614 MHz, some choose to go lower. I have noticed Sense ROMs (like synergy) are a bit more touchy with performance tweaks. For me, even in hot weather I need to bump my settings up, as my phone can't keep up with the heat.
Sent by Supersonic!
Thanks so much man.i was a dev at one point..but i dunno jack about clocking cpu.lol.so youre saying 614,as in set the max value to 614 correct?and i sure will check out that kernel
HTC EVO 4G Synergy RC2
--We Are Revolutionary--
Not to be a nag,but im digging for that kernel,no dice.can u link me over there pal?
Sent from my PC36100 using XDA Premium App
http://forum.xda-developers.com/showthread.php?t=1192529
I use 128 min and 614 Max. Depending on my use, and how often I'm flashing, I can get about 20 solid hours
Sent by Supersonic!
Thanks again man.i appreciate the assistance...we all needed it at one point lol.
Sent from my PC36100 using XDA Premium App
im using 128 MHz and 614MHz with the smartass governor.. runs really good
My best battery life is on AOSP ROM's with this set up on tiamat kernel.
Sent by Supersonic!
what aosp rom your running?
I had been running decks, however, I have jumped skip to SalvagMod.
Sent by Supersonic!
Ill also note a program i purchased,was cpu master by antutu inc.
Pretty much similar to setcpu.
Has profile options etc.
Sent from my PC36100 using Tapatalk
What does everyone find is the best kernel for battery life?
Sent from my SGH-T989 using Tapatalk
personally, i don't think you need to be concerned much about battery life
i'm surprised myself, as i'm a heavy user, and this phone can last very long time on a single charger, pretty much a full day without the need to top up the battery
and that is OC to 1.8 Ghz
my old Nexus S wont last 4 hours with the same usage i give to the T989
it really depends on usage there isn't one golden battery saving combo in my opinion
I would like to know as well because that would be my main reason to want to root the phone.
I'm mainly just looking to get rid of bloatware and better battery life, which rom do you think would be best XDA?
believe it or not, the stock ROM in this version of the phone is very decent for battery life
you can find tune it with SetCPU if battery life is your goal, and NoBars, and optionally JuiceDefender
What about all of the uv kernels? I need to squeeze juice as i'm a power user.
Sent from my SGH-T989 using Tapatalk
Im getting awesome battry life and even better performance on BeastMod v2.0 with Synergy 0.03 Kernel. With SETCpu i have it at 1.6ghz MAX and 384 Min with LAGFREE scaling. Buttery smooth!
Sent from my BeastModded Synergized SGS2
babymatteo said:
Im getting awesome battry life and even better performance on BeastMod v2.0 with Synergy 0.03 Kernel. With SETCpu i have it at 1.6ghz MAX and 384 Min with LAGFREE scaling. Buttery smooth!
Sent from my BeastModded Synergized SGS2
Click to expand...
Click to collapse
Seconded. And I didn't even OC.
I am also running:
1) Juice Defender Ultimate
2) SetCPU for screen off profile
3) NoBars Battery Saver
This combined with any bloatfree ROM will net you awesome battery life on this phone.
what setting are you using for screen off profile in setcpu?
sl___ said:
Seconded. And I didn't even OC.
I am also running:
1) Juice Defender Ultimate
2) SetCPU for screen off profile
3) NoBars Battery Saver
This combined with any bloatfree ROM will net you awesome battery life on this phone.
Click to expand...
Click to collapse
Sent from my SGH-T989 using XDA App
fatboy547 said:
what setting are you using for screen off profile in setcpu?
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
I use to use 192 min 384 max, but had some SOD problems with the new BeastMOD 2.0 rom, so I used 384 min 432 max.
What about this new phantom ROM?
Sent from my SGH-T989 using Tapatalk
hah2110 said:
What about this new phantom ROM?
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
BUMP......
Juggernaut 2.0 with Jugs 0.3 Kernel
So far for system stability this is an awesome combo. Im still going to wait a few days to talk about battery life.. i spent the last 2hours texting my girlfriend and it drained 50% of my battery.. so yeah hoping the next fews days things will pan out.
2 users reported great battery life with it...
I'm also using BeastMod 2.0 with the latest Synergy Kernel 0.05. I use SetCPU to do min 384 max 1.5ghz (not overclocking) with lagfree governor. It is incredibly fast and my battery life has been solid. I only have one profile on SetCPU which is 384 min 384 max when screen off. All is well here.
atrade said:
I'm also using BeastMod 2.0 with the latest Synergy Kernel 0.05. I use SetCPU to do min 384 max 1.5ghz (not overclocking) with lagfree governor. It is incredibly fast and my battery life has been solid. I only have one profile on SetCPU which is 384 min 384 max when screen off. All is well here.
Click to expand...
Click to collapse
What do you consider. Im using 0.05 and this phone is chewing up battery..i estimate 6 hours tops for mine with this kernel...itsjust so fast tho that i cant say no.
Hey guys Just got my hands on a dinc2. I'm coming from the evo shift, its great to see 3.5 roms. Looks like the incredible 2 has a strong community, I will contribute as much as possible.
What are you guys have your kernel OC'd to? How much undervolted can she take? Does anyone use tv-out?
hightech316 said:
Hey guys Just got my hands on a dinc2. I'm coming from the evo shift, its great to see 3.5 roms. Looks like the incredible 2 has a strong community, I will contribute as much as possible.
What are you guys have your kernel OC'd to? How much undervolted can she take? Does anyone use tv-out?
Click to expand...
Click to collapse
As far as OC and UV I don't bump it real high, as a matter of fact right now I'm running at 1 ghz (stock speed) if I do OC I'm usually running it at 1.3 ghz.
UV usually a decent is -50 under. Much under that and you could run into freezing up.
I don't remember if TV out works very well with this phone (or at all, I just don't remember lol)
Welcome to this awesome phone.
Sent from my Mikrunny'd Superphone using Forum Runner
I overclock to 1.1 GHz and undervolt -75.
Sent from my HTC_Flyer_P512_NA using xda premium
There is dlna, that's as close to tv out as we can get right now
Sent from my DINC2 in Yuma, AZ
1.3 overclock smartassv2 and 50 mv under
Sent from my ADR6350 using xda premium
I'm really enjoying this phone. I have it OC'd @ 1.2 undervolted 25-50 . Running real strong, and very snappy.
I'm diggn this ext4 touch recovery.
Sent from my ADR6350 using XDA App
hightech316 said:
I'm really enjoying this phone. I have it OC'd @ 1.2 undervolted 25-50 . Running real strong, and very snappy.
I'm diggn this ext4 touch recovery.
Sent from my ADR6350 using XDA App
Click to expand...
Click to collapse
Touch Recovery is super slick, no way i can go back. Got mine oc'[email protected] and [email protected] across the board, on sense roms i [email protected] across but on these new ICS roms -25 works just fine, I get decent battery life and a fast phone.
dankblaze said:
Touch Recovery is super slick, no way i can go back. Got mine oc'[email protected] and [email protected] across the board, on sense roms i [email protected] across but on these new ICS roms -25 works just fine, I get decent battery life and a fast phone.
Click to expand...
Click to collapse
I was going to get ICS a shot tonight, its an SDK build isn't it?
Sent from my ADR6350 using XDA App
hightech316 said:
I was going to get ICS a shot tonight, its an SDK build isn't it?
Sent from my ADR6350 using XDA App
Click to expand...
Click to collapse
Cm9 based. Its built from source.
Sent from my Mikrunny'd Superphone using Forum Runner
hell, on CM7 with aeroevan's .7 cfs kerrnel i've gotten a stable 1800mhz overclock with no undervolting...this phone can take a beating
Welcome to the clan my friend
1.8 is a bit extreme. That's not something you won't wanna keep for long periods of time. I heard that can mess things up potentially.
Sent from my Mikrunny'd Superphone using Forum Runner
Ya be weary.. had the original dinc and I fried it.. its not fun at all.. I could only run skyraider and had to have an extremely uv'd kernel for it to just work normal. If I used GPS I had to have my AC on and my phone shoved in the vent or it would restart
Sent from my ADR6350 using xda premium
Zax_Was_Here said:
hell, on CM7 with aeroevan's .7 cfs kerrnel i've gotten a stable 1800mhz overclock with no undervolting...this phone can take a beating
Click to expand...
Click to collapse
Doesn't heat up quick? What's the highest tempature these snap dragons will take before damaging ?
Sent from my ADR6350 using XDA App
Linch89 said:
Welcome to the clan my friend
Click to expand...
Click to collapse
Glad to be here, EVO shift users were mostly rude....
Sorry for dbl post
Sent from my ADR6350 using XDA App
hightech316 said:
Doesn't heat up quick? What's the highest tempature these snap dragons will take before damaging ?
Sent from my ADR6350 using XDA App
Click to expand...
Click to collapse
Yeah, it got pretty warm, but i was careful to make sure i didnt melt a hole in my back cover xD.
I'm not too sure what the max temp these phones can handle is, i'm just giving an extreme example of what the phone can handle, i wouldnt reccomend more than 1.6, at the highest, 1.4 is fine for daily use
Zax_Was_Here said:
Yeah, it got pretty warm, but i was careful to make sure i didnt melt a hole in my back cover xD.
I'm not too sure what the max temp these phones can handle is, i'm just giving an extreme example of what the phone can handle, i wouldnt reccomend more than 1.6, at the highest, 1.4 is fine for daily use
Click to expand...
Click to collapse
i've seen mine around 125 deg before
Zax_Was_Here said:
hell, on CM7 with aeroevan's .7 cfs kerrnel i've gotten a stable 1800mhz overclock with no undervolting...this phone can take a beating
Click to expand...
Click to collapse
it's always cool to do that just for testing purposes but oc'ing your phone to that level will only fry out your cpu faster as well as kill your battery life. not really necessary to oc this phone above 1.3ghz and if you want to save battery uv between -25 to -50.
I have been running 1.4 for a while now. I uv -25, except the top two voltages I leave stock. Might try -50 eventually. Battery life is pretty beasty with smartassv2
Sent from my mobile typewriter with tapatalk
Oh that reminds me actually, when i oc to 1.8 (or is it 1.9, forgot what aero's kernel maxes at) i CANNOT run it at smartassV2
Locks up for me past 1.5ish every time when i'm on smartassv2, i have to switch to smoothass for the phone to work well
However, i've had no problems with smartassv2 below 1.5, which is why i run it on my phone
hi i'm looking to overclock my sprint epic 4g cpu up to 1.8ghz and also the gpu to 300mahz and 72hz refresh rate
on either cyanogenmod 7 or 10
what kernel and ROM and CPU/GPU overclocking apps should I use with voltage control and what (safe) voltages should I try for the cpu and gpu ARM and Internal voltages (what build number do I need for cm 7 or 10 (either stable or nightly)
also I noticed that the slide out keyboard shift and function keys don't work on cyanogenmod 10 stable build not sure about a nightly build
I'd like to fix the keyboard too
i'd like to be able to turn the boot logo on and off and possibly change it to a different one and also add a boot up sound to the logo
should I use the franko or samurai or maybe a different kernel ?
what modem should I use for max speed (EL30 FC09 FC19 or Nexus LF2 K2 ?) and compatible rom
I know how to install everything just need advice
If all of the above isn't possible at least I'd like to get the CPU to the highest possible speed past 1.2 ghz if possible most of all and not have random reboots or lockups or sleep of death and woking keyboard and least amount of bugs in the rom
Thank you so much in advance for any advice
Do your shift and Fn keys work if you hold them down when using them? Kind of like the way you would use them on a PC keyboard?
Sent from my SPH-D700 using Tapatalk 2
Last thing I know of that had what you're looking for is CM9 with Samurai Kernel. The processor clocks to 1.5 Ghz and I believe the gpu is overclocked to 400Mhz. Idk what the refresh rate for the screen is, but that combo would probably be the closest to what you're looking for
Sent from my SPH-D700 using Tapatalk 2
jeffreyjicha said:
Last thing I know of that had what you're looking for is CM9 with Samurai Kernel. The processor clocks to 1.5 Ghz and I believe the gpu is overclocked to 400Mhz. Idk what the refresh rate for the screen is, but that combo would probably be the closest to what you're looking for
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
I used it before, it really messed up my phone.
glad to hear/see any follow ups.
using CM10.1 overclocked.
jeffreyjicha said:
Last thing I know of that had what you're looking for is CM9 with Samurai Kernel. The processor clocks to 1.5 Ghz and I believe the gpu is overclocked to 400Mhz. Idk what the refresh rate for the screen is, but that combo would probably be the closest to what you're looking for
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
^^^^this... there is no franco kernel here, that's for the epic touch... nobody has been able to overclock this phone past 1.6 Ghz... samurai had 1.6 at one point, but it was removed because there were stability issues with most phones trying to overclock that high... samurai has always been my favorite kernel from tw gb roms all the way to cm9... sadly development stopped when earthbound upgraded and there is no samurai kernel for cm10 or 10.1... everybodies phone is different and handles overclocking differently... best bet is to just keep trying combinations until you find your perfect match...
SubCool said:
Bump
Sent from my SPH-D700 using xda app-developers app
Click to expand...
Click to collapse
I don think you can get what you're looking for . the answers provided should be enough to tell you that this phone can't be oc'ed that much
Sent from my LG-MS770 using xda app-developers app
lmsomb said:
I don think you can get what you're looking for . the answers provided should be enough to tell you that this phone can't be oc'ed that much
Sent from my LG-MS770 using xda app-developers app
Click to expand...
Click to collapse
Um- the responses tell me its capable..
HOw do you individually OC the GPU?
SubCool said:
Um- the responses tell me its capable..
HOw do you individually OC the GPU?
Click to expand...
Click to collapse
Not possible on cm10... with cm7 you'll have to dig around and search for samurai kernel...
flastnoles11 said:
Not possible on cm10... with cm7 you'll have to dig around and search for samurai kernel...
Click to expand...
Click to collapse
I have a link to the CM9 kernel that goes to 1.5Ghz.
flastnoles11 said:
Not possible on cm10... with cm7 you'll have to dig around and search for samurai kernel...
Click to expand...
Click to collapse
I have used it on CM9, and got it to 1.4 comfortably, but the kernel itself was quarky as hell. The battery died when unclocked and- just all in all at bad kernel.
im curious on what he did to make it do that though. Was it an app he combined into the kernel? Did he expand something?
Technically- OC"ing is just like any normal OC. INcrease the multiplier or frequency and then manipulate the voltage to handle the work. But- THe couple app i foudn that do that- like uh... setcpu, targek or something all arent supported by our rom/kernel/ something. Its rather frustrating.
With the Packman ROM im using, he combined the Performance control into the rom, and you can actually change the voltages- but.. i cant make it go faster.
TO go on with that- i still cant find a way to OC the GPU. i see people saying they got it up to 400mhz. or something. But- HOW!? an app? Kernel again!? heck, i dont even know what the stock settins are. :/
GPU overclocking is achieved in the kernel.
Friendly Neighborhood Moderator
SubCool said:
I have used it on CM9, and got it to 1.4 comfortably, but the kernel itself was quarky as hell. The battery died when unclocked and- just all in all at bad kernel.
im curious on what he did to make it do that though. Was it an app he combined into the kernel? Did he expand something?
Technically- OC"ing is just like any normal OC. INcrease the multiplier or frequency and then manipulate the voltage to handle the work. But- THe couple app i foudn that do that- like uh... setcpu, targek or something all arent supported by our rom/kernel/ something. Its rather frustrating.
With the Packman ROM im using, he combined the Performance control into the rom, and you can actually change the voltages- but.. i cant make it go faster.
TO go on with that- i still cant find a way to OC the GPU. i see people saying they got it up to 400mhz. or something. But- HOW!? an app? Kernel again!? heck, i dont even know what the stock settins are. :/
Click to expand...
Click to collapse
1. He did it by being a kernel master... 2. they aren't supported because of the kernel you're using. 3. And again, the kernel you're using. The only way to overclock the gpu is with the samurai kernel.
4. And most importantly, for everything you want out of a kernel, it's about time to learn Linux and build your own kernel...
flastnoles11 said:
3. And again, the kernel you're using. The only way to overclock the gpu is with the samurai kernel.
Click to expand...
Click to collapse
Aww man I miss Samurai's 400MHz GPU OC... But the Voodoo defaults there is VERY terrible... Just why isn't there a kernel with ONLY GPU OC (i.e. no CPU OC up to like 1.4GHz (I think games depend more badly on GPU) and no Voodoo and such)...
Sent from HTC Incredible S @ PACman v21
If you build it, they will flash it!
Yes, for those looking for an easy way out, it's not going to happen. Learn to make a kernel then learn how to manipulate the settings. If it was easy then everyone would be doing it. No one has any other spoon fed answers.
I think not having an easy way out may be the definition of xda-developers. Forget where I read it but it's about the journey rather than the destination, which I know doesn't hold true for every one but I know it does for me.