Im asking this Question for a friend and I wonder if some of you guys can try this for me....When you put a bit of pressure on the LCD screen do you get a mark...the kind you would get on a TFT screen...
Just need some input into this ...Thanks
no... because it has a glass screen(for cap. touch) instead of a plastic one...i don't see and marks from applying pressure on the sceen
hope tht helps..
Related
Hello, I am having serious issues with the touchscreen of my BA.
The screen part is kind os loose, it moves slightly sideways.
I have no idea if the two things are connected, the touchscreen also does not work properly, as it randomly does not detect taps.
I have noticed that if I press for a bit the sides of the screen down onto the back of the BA, it works better for a while.
Do you guys have any clue on what the issue could be and how to solve it?
I myself have the idea that some tap detecting thing behind the screen has detached from the screen itself, and that I have to open it to fix it. Am I wrong?
Up.
Anybody who can give some advise before I take it to assistence?
unfortunatly
i have the same issue...and everybody is telling me i need new screen ..if u get a solution... i'd be grateful if u tell me.thnx alot
Hi, I have disassembled it, trying to understand something, but really nothing happened, I can't pretend much since i am not an expert. i have no clue, that is why i am about to take it to the shop and get it fixed. damn it.
hi..
saw this in another site..hope it helps..
"Are you using a screen protector that has got under the case or could there be a bit of detritus between the screen and the case? These cause pressure on the digitizer making it unable to register taps.
Take off the screen protector and see if any improvement. Fold a piece from a sheet of copier paper at the corner to make a scoop and go around the edge of your digitizer just under the case."
regards.. :idea:
hi..
saw this in another site..hope it helps..
"Are you using a screen protector that has got under the case or could there be a bit of detritus between the screen and the case? These cause pressure on the digitizer making it unable to register taps.
Take off the screen protector and see if any improvement. Fold a piece from a sheet of copier paper at the corner to make a scoop and go around the edge of your digitizer just under the case."
regards.. :idea:
not my case, but thank you for your help!
hi guys !
my problem is written in Title kiddin
before 2 days my brother broke screen on my baby and i have some questions! screen got little crack, color, sharpnesss etc. is normal but its not touch screen anymore! :/
so what should i buy: that plastic which he broke (costs 20$) or whole touch screen (costs about 100$) ?
more reasonably is to buy that plastic, but some guy told me that i need to buy whole screen (he wanna sell it to me for about 120e) but i dont belive him!
what are our opinions ??
bye
I buy you the PCB cable of the LCD!!
Mine is cutted and I have a good LCD and bad PCB cable!!
Does anyone knows how to remove it? and to glue it back?
Hey People,
I had recently brought htc touch hd and simply loved it but i had been putting the same in my pocket without the cover leading to many scratches on the top touch screen. I am looking for a replacement but i really dont know, do i need to change the housing or is it the digitizer or the face plate..i am confused..
With my limited searching skills, if i look for housing, it shows the external body but not sure if its includes the top glass that is scratched. If i look for digitizer, it is the complete touch screen mechanism..does this need to be changed or their is the top glass/film which comes on top of this.. or is it called faceplate.. it would be real helpful if some can give me the link to this top glass/cover or film whatever it is called..
P.S :- My touch screen works absolutely fine and so is the display.
Nishant said:
Hey People,
I had recently brought htc touch hd and simply loved it but i had been putting the same in my pocket without the cover leading to many scratches on the top touch screen. I am looking for a replacement but i really dont know, do i need to change the housing or is it the digitizer or the face plate..i am confused..
With my limited searching skills, if i look for housing, it shows the external body but not sure if its includes the top glass that is scratched. If i look for digitizer, it is the complete touch screen mechanism..does this need to be changed or their is the top glass/film which comes on top of this.. or is it called faceplate.. it would be real helpful if some can give me the link to this top glass/cover or film whatever it is called..
P.S :- My touch screen works absolutely fine and so is the display.
Click to expand...
Click to collapse
Have you searched on ebay, i always get all my PDA parts there...
As above
i know where to get them but i don't which part is it? Digitizer or Faceplate or Housing?
Hi,
I broke my screen glass and the touch-screen (digitizer?) works just fine, as well as the LCD panel.
I would like to (try to) replace the glass, but I am in a kind of the same dilema as you.
I think the digitizer is touch-receiver + GLASS (not just the thin film).
Can you (or anyone else) confirm this?
Thanks,
cheers,
Nenad
Nishant said:
i know where to get them but i don't which part is it? Digitizer or Faceplate or Housing?
Click to expand...
Click to collapse
The part you want is the digitizer, that the part you touch with your stylus, the lcd screen sits underneath this, they are glued together and are hard to seperate, buying just the digitizer can lead to many problems, its better to buy an lcd screen and digitizer allready together then just replace the whole thing
Hi, I'm wanting to replace my HOXs screen.
There are yellow spots on the screen, does this mean I need to replace the lcd panel as well or if I just replace the glass/digitizer will this fix the yellow spots?
Also, I managed to fix a galaxy ace screen (glass/digitizer) by separating the digitizer from the lcd panel and the lcd panel is fine. I know it has been said it's not really possible to separate the two with the HOX but if I have managed to do it for the ace, do you think it's possible for the HOX??
Any thoughts would be appreciated
You don't really need to replace the screen if you have orange spots ,just put the screen on full brightness over night and your problems will be solved , if you want to replace the screen ,replace the whole thing as you said I have seen only one video out of 60 that the guy was successful in ceperating digitiser from LCD ,good luck
They will disapear after some time. I had the spots too.
Thanks for the replies.
Sorry I forgot to mention that the screen is cracked too. But my main concern was separating the lcd from the digitizer. I did do it for the ace and it was pretty easy buy if you think I would be better off to replace the panel and digitizer, then I'll do that.
shinigamikris said:
Thanks for the replies.
Sorry I forgot to mention that the screen is cracked too. But my main concern was separating the lcd from the digitizer. I did do it for the ace and it was pretty easy buy if you think I would be better off to replace the panel and digitizer, then I'll do that.
Click to expand...
Click to collapse
The things is, the ace and the hox are very different devices. Just because you've managed to seperate digitizer and screen on the ace doesn't mean you could do that on the hox too. Just compare the space between LCD and digitizer of both devices and you'll see what I mean.
Sent from my HTC One X using xda premium
You wont manage to seperate the screen from the digitizer trust me, i tryed it and the glue is too strong + the lcd is too fragile.
Hey guys, so rather then explain this all in detail, ill try my best to explain this in shorter words.
My metal frame going around the phone is cracked and I also have a crack on the screen. I can change the glass no problem, but here is the stipulation.
All the times I have seen the screen being seperated from the frame itself (not the glass), the digitizer has been mangled off in pieces. Along with that, I have a white GS3, but if I was going to exchange the middle plate and glass, I wanted to make it black. So here is my questions that are most likely simple but I wanted to ask.
- Can you separate the screen/ digitizer withOUT damaging the digitizer? The screen/digitizer is still perfect and would like to reuse it in another housing.
- For what im trying to do, would this work?
Code:
www . sw-box . com/Middle-Frame-Bezel-Middle-Plate-And-Back-Cover-For-Samsung-Galaxy-S3-i9300-Black.html
(im not trying to spam or advertise, sorry about this code/link)
My end goal is to use my current screen in a new housing to make my white GS3 a Black GS3 using the materials in the link.
Any point in the right direction would be greatly appreciated.
Thanks guys!
bump anyone?